Search

BackgroundIdiopathic pulmonary fibrosis (IPF) is a progressive, irreversible, and usually fatal lung disease of unknown reasons, generally affecting the elderly population. Early diagnosis of IPF is crucial for triaging patients' treatment planning into anti-fibrotic treatment or treatments for other causes of pulmonary fibrosis. However, current IPF diagnosis workflow is complicated and time-consuming, which involves collaborative efforts from radiologists, pathologists, and clinicians and it is largely subject to inter-observer variability.PurposeThe purpose of this work is to develop a deep learning-based automated system that can diagnose subjects with IPF among subjects with interstitial lung disease (ILD) using an axial chest computed tomography (CT) scan. This work can potentially enable timely diagnosis decisions and reduce inter-observer variability.MethodsOur dataset contains CT scans from 349 IPF patients and 529 non-IPF ILD patients. We used 80% of the dataset for training and validation purposes and 20% as the holdout test set. We proposed a two-stage model: at stage one, we built a multi-scale, domain knowledge-guided attention model (MSGA) that encouraged the model to focus on specific areas of interest to enhance model explainability, including both high- and medium-resolution attentions; at stage two, we collected the output from MSGA and constructed a random forest (RF) classifier for patient-level diagnosis, to further boost model accuracy. RF classifier is utilized as a final decision stage since it is interpretable, computationally fast, and can handle correlated variables. Model utility was examined by (1) accuracy, represented by the area under the receiver operating characteristic curve (AUC) with standard deviation (SD), and (2) explainability, illustrated by the visual examination of the estimated attention maps which showed the important areas for model diagnostics.ResultsDuring the training and validation stage, we observe that when we provide no guidance from domain knowledge, the IPF diagnosis model reaches acceptable performance (AUC±SD = 0.93±0.07), but lacks explainability; when including only guided high- or medium-resolution attention, the learned attention maps are not satisfactory; when including both high- and medium-resolution attention, under certain hyperparameter settings, the model reaches the highest AUC among all experiments (AUC±SD = 0.99±0.01) and the estimated attention maps concentrate on the regions of interests for this task. Three best-performing hyperparameter selections according to MSGA were applied to the holdout test set and reached comparable model performance to that of the validation set.ConclusionsOur results suggest that, for a task with only scan-level labels available, MSGA+RF can utilize the population-level domain knowledge to guide the training of the network, which increases both model accuracy and explainability.

Determination of therapeutic benefit in intracranial tumors is intimately dependent on serial assessment of radiographic images. The Response Assessment in Neuro-Oncology (RANO) criteria were established in 2010 to provide an updated framework to better characterize tumor response to contemporary treatments. Since this initial update a number of RANO criteria have provided some basic principles for the interpretation of changes on MR images; however, the details of how to operationalize RANO and other criteria for use in clinical trials are ambiguous and not standardized. In this review article designed for the neuro-oncologist or treating clinician, we outline essential steps for performing radiographic assessments by highlighting primary features of the Imaging Charter (referred to as the Charter for the remainder of this article), a document that describes the clinical trial imaging methodology and methods to ensure operationalization of the Charter into the workings of a clinical trial. Lastly, we provide recommendations for specific changes to optimize this methodology for neuro-oncology, including image registration, requirement of growing tumor for eligibility in trials of recurrent tumor, standardized image acquisition guidelines, and hybrid reader paradigms that allow for both unbiased measurements and more comprehensive interpretation.

ObjectiveTo examine changes in the extent of specific patterns of interstitial lung disease (ILD) as they transition from one pattern to another in response to immunosuppressive therapy in systemic sclerosis-related ILD (SSc-ILD).MethodsWe evaluated changes in the quantitative extent of specific lung patterns of ILD using volumetric high-resolution computed tomography (HRCT) scans obtained at baseline and after 2 years of therapy in patients treated with either cyclophosphamide (CYC) for 1 year or mycophenolate mofetil (MMF) for 2 years in Scleroderma Lung Study II. ILD patterns included lung fibrosis, ground glass, honeycombing, and normal lung. Net change was calculated as the difference in the probability of change from one ILD pattern to another. Wilcoxon's signed rank test was used to compare the changes.ResultsForty-seven and 50 patients had baseline and follow-up scans in the CYC and MMF groups, respectively. Mean net improvements reflecting favorable changes from one ILD pattern to another in the whole lung in the CYC and MMF groups, respectively, were as follows: from lung fibrosis to a normal lung pattern, 21% and 19%; from a ground-glass pattern to a normal lung pattern, 30% and 28%; and from lung fibrosis to a ground-glass pattern, 5% and 0.5%. The mean overall improvement in transitioning from a ground-glass pattern or lung fibrosis to a normal lung pattern was significant for both treatments (all P < 0.001).ConclusionSignificantly favorable transitions from both ground-glass and lung fibrosis ILD patterns to a normal lung pattern were observed in patients undergoing immunosuppressive treatment for SSc-ILD, suggesting the usefulness of examining these transitions for insights into the underlying pathobiology of treatment response.

Idiopathic pulmonary fibrosis (IPF) is a fatal lung disease characterized by an unpredictable progressive declinein lung function. Natural history of IPF is unknown and the prediction of disease progression at the time ofdiagnosis is notoriously difficult. High resolution computed tomography (HRCT) has been used for the diagnosisof IPF, but not generally for monitoring purpose. The objective of this work is to develop a novel predictivemodel for the radiological progression pattern at voxel-wise level using only baseline HRCT scans. Mainly, thereare two challenges: (a) obtaining a data set of features for region of interest (ROI) on baseline HRCT scans andtheir follow-up status; and (b) simultaneously selecting important features from high-dimensional space, andoptimizing the prediction performance. We resolved the first challenge by implementing a study design andhaving an expert radiologist contour ROIs at baseline scans, depending on its progression status in follow-upvisits. For the second challenge, we integrated the feature selection with prediction by developing an algorithmusing a wrapper method that combines quantum particle swarm optimization to select a small number of featureswith random forest to classify early patterns of progression. We applied our proposed algorithm to analyzeanonymized HRCT images from 50 IPF subjects from a multi-center clinical trial. We showed that it yields aparsimonious model with 81.8% sensitivity, 82.2% specificity and an overall accuracy rate of 82.1% at the ROIlevel. These results are superior to other popular feature selections and classification methods, in that ourmethod produces higher accuracy in prediction of progression and more balanced sensitivity and specificity witha smaller number of selected features. Our work is the first approach to show that it is possible to use onlybaseline HRCT scans to predict progressive ROIs at 6 months to 1year follow-ups using artificial intelligence.

PurposeWe present a method for generating a T2 MR-based probabilistic model of tumor occurrence in the prostate to guide the selection of anatomical sites for targeted biopsies and serve as a diagnostic tool to aid radiological evaluation of prostate cancer.Materials and methodsIn our study, the prostate and any radiological findings within were segmented retrospectively on 3D T2-weighted MR images of 266 subjects who underwent radical prostatectomy. Subsequent histopathological analysis determined both the ground truth and the Gleason grade of the tumors. A randomly chosen subset of 19 subjects was used to generate a multi-subject-derived prostate template. Subsequently, a cascading registration algorithm involving both affine and non-rigid B-spline transforms was used to register the prostate of every subject to the template. Corresponding transformation of radiological findings yielded a population-based probabilistic model of tumor occurrence. The quality of our probabilistic model building approach was statistically evaluated by measuring the proportion of correct placements of tumors in the prostate template, i.e., the number of tumors that maintained their anatomical location within the prostate after their transformation into the prostate template space.ResultsProbabilistic model built with tumors deemed clinically significant demonstrated a heterogeneous distribution of tumors, with higher likelihood of tumor occurrence at the mid-gland anterior transition zone and the base-to-mid-gland posterior peripheral zones. Of 250 MR lesions analyzed, 248 maintained their original anatomical location with respect to the prostate zones after transformation to the prostate.ConclusionWe present a robust method for generating a probabilistic model of tumor occurrence in the prostate that could aid clinical decision making, such as selection of anatomical sites for MR-guided prostate biopsies.

A clinical validation of the bone scan lesion area (BSLA) as a quantitative imaging biomarker was performed in metastatic castration-resistant prostate cancer (mCRPC). BSLA was computed from whole-body bone scintigraphy at baseline and week 12 posttreatment in a cohort of 198 mCRPC subjects (127 treated and 71 placebo) from a clinical trial involving a different drug from the initial biomarker development. BSLA computation involved automated image normalization, lesion segmentation, and summation of the total area of segmented lesions on bone scan AP and PA views as a measure of tumor burden. As a predictive biomarker, treated subjects with baseline BSLA [Formula: see text] had longer survival than those with higher BSLA ([Formula: see text] and [Formula: see text]). As a surrogate outcome biomarker, subjects were categorized as progressive disease (PD) if the BSLA increased by a prespecified 30% or more from baseline to week 12 and non-PD otherwise. Overall survival rates between PD and non-PD groups were statistically different ([Formula: see text] and [Formula: see text]). Subjects without PD at week 12 had longer survival than subjects with PD: median 398 days versus 280 days. BSLA has now been demonstrated to be an early surrogate outcome for overall survival in different prostate cancer drug treatments.

Lack of classifier robustness is a barrier to widespread adoption of computer-aided diagnosis systems for computed tomography (CT). We propose a novel Robustness-Driven Feature Selection (RDFS) algorithm that preferentially selects features robust to variations in CT technical factors. We evaluated RDFS in CT classification of fibrotic interstitial lung disease using 3D texture features. CTs were collected for 99 adult subjects separated into three datasets: training, multi-reconstruction, testing. Two thoracic radiologists provided cubic volumes of interest corresponding to six classes: pulmonary fibrosis, ground-glass opacity, honeycombing, normal lung parenchyma, airway, vessel. The multi-reconstruction dataset consisted of CT raw sinogram data reconstructed by systematically varying slice thickness, reconstruction kernel, and tube current (using a synthetic reduced-tube-current algorithm). Two support vector machine classifiers were created, one using RDFS ("with-RDFS") and one not ("without-RDFS"). Classifier robustness was compared on the multi-reconstruction dataset, using Cohen's kappa to assess classification agreement against a reference reconstruction. Classifier performance was compared on the testing dataset using the extended g-mean (EGM) measure. With-RDFS exhibited superior robustness (kappa 0.899-0.989) compared to without-RDFS (kappa 0.827-0.968). Both classifiers demonstrated similar performance on the testing dataset (EGM 0.778 for with-RDFS; 0.785 for without-RDFS), indicating that RDFS does not compromise classifier performance when discarding nonrobust features. RDFS is highly effective at improving classifier robustness against slice thickness, reconstruction kernel, and tube current without sacrificing performance, a result that has implications for multicenter clinical trials that rely on accurate and reproducible quantitative analysis of CT images collected under varied conditions across multiple sites, scanners, and timepoints.

ObjectivesThe purpose of this study was to define clinically appropriate, computer-aided lung nodule detection (CAD) requirements and protocols based on recent screening trials. In the following paper, we describe a CAD evaluation methodology based on a publically available, annotated computed tomography (CT) image data set, and demonstrate the evaluation of a new CAD system with the functionality and performance required for adoption in clinical practice.MethodsA new automated lung nodule detection and measurement system was developed that incorporates intensity thresholding, a Euclidean Distance Transformation, and segmentation based on watersheds. System performance was evaluated against the Lung Imaging Database Consortium (LIDC) CT reference data set.ResultsThe test set comprised thin-section CT scans from 108 LIDC subjects. The median (±IQR) sensitivity per subject was 100 (±37.5) for nodules ≥ 4 mm and 100 (±8.33) for nodules ≥ 8 mm. The corresponding false positive rates were 0 (±2.0) and 0 (±1.0), respectively. The concordance correlation coefficient between the CAD nodule diameter and the LIDC reference was 0.91, and for volume it was 0.90.ConclusionsThe new CAD system shows high nodule sensitivity with a low false positive rate. Automated volume measurements have strong agreement with the reference standard. Thus, it provides comprehensive, clinically-usable lung nodule detection and assessment functionality.Key points• CAD requirements can be based on lung cancer screening trial results. • CAD systems can be evaluated using publically available annotated CT image databases. • A new CAD system was developed with a low false positive rate. • The CAD system has reliable measurement tools needed for clinical use.

PurposeTo assess the intra- and interscan reproducibility of LV twist using FAST. Assessing the reproducibility of the measurement of new MRI biomarkers is an important part of validation. Fourier Analysis of STimulated Echoes (FAST) is a new MRI tissue tagging method that has recently been shown to compare favorably with conventional estimates of left ventricular (LV) twist from cardiac tagged images, but with significantly reduced user interaction time.Materials and methodsHealthy volunteers (N = 10) were scanned twice using FAST over 1 week. On day 1, two measurements of LV twist were collected for intrascan comparisons. Measurements for LV twist were again collected on day 8 for interscan assessment. LV short-axis tagged images were acquired on a 3 Tesla (T) scanner to ensure detectability of tags during early and mid-diastole. Peak LV twist is reported as mean ± SD. Reproducibility was assessed using the concordance correlation coefficient (CCC) and the repeatability coefficient (RC) (95% confidence interval [CI] range).ResultsMean peak twist measurements were 13.4 ± 4.3° (day 1, scan 1), 13.6 ± 3.7° (day 1, scan 2), and 13.0 ± 2.7° (day 8). Bland-Altman analysis resulted in intra- and interscan bias and 95% CI of -0.6° [-1.0°, 1.6°] and 1.4° (-1.0°, 3.0°), respectively. The Bland-Altman RC for peak LV twist was 2.6° and 4.0° for intra- and interscan, respectively. The CCC was 0.9 and 0.6 for peak LV twist for intra- and interscan, respectively.ConclusionFAST is a semi-automated method that provides a quick and quantitative assessment of LV systolic and diastolic twist that demonstrates high intrascan and moderate interscan reproducibility in preliminary studies.

ObjectivesTo propose and evaluate a technique for automatic quantification of fissural completeness from chest computed tomography (CT) in a database of subjects with severe emphysema.MethodsNinety-six CT studies of patients with severe emphysema were included. The lungs, fissures and lobes were automatically segmented. The completeness of the fissures was calculated as the percentage of the lobar border defined by a fissure. The completeness score of the automatic method was compared with a visual consensus read by three radiologists using boxplots, rank sum tests and ROC analysis.ResultsThe consensus read found 49% (47/96), 15% (14/96) and 67% (64/96) of the right major, right minor and left major fissures to be complete. For all fissures visually assessed as being complete the automatic method resulted in significantly higher completeness scores (mean 92.78%) than for those assessed as being partial or absent (mean 77.16%; all p values

Paper, an inexpensive material with natural biocompatibility, non‐toxicity, and biodegradability, allows for affordable and cost‐effective substrates for unconventional advanced electronics, often called papertronics. On the other hand, polymeric elastomers have shown to be an excellent success for substrates of soft bioelectronics, providing stretchability in skin wearable technology for continuous sensing applications. Although both materials hold their unique advantageous characteristics, merging both material properties into a single electronic substrate reimagines paper‐based bioelectronics for wearable and patchable applications in biosensing, energy generation and storage, soft actuators, and more. Here, a breathable, light‐weighted, biocompatible engineered stretchable paper is reported via coaxial nonwoven microfibers for unconventional bioelectronic substrates. The stretchable papers allow intimate bioconformability without adhesive through coaxial electrospinning of a cellulose acetate polymer (sheath) and a silicone elastomer (core). The fabricated cellulose‐silicone fibers exhibit a greater percent strain than commercially available paper while retaining hydrophilicity, biocompatibility, combustibility, disposable, and other natural characteristics of paper. Moreover, the nonwoven stretchable cellulose‐silicone fibrous mat can adapt conventional printing and fabrication process for paper‐based electronics, an essential aspect of advanced bioelectronic manufacturing. [ABSTRACT FROM AUTHOR]