Search

A ferromagnetic barrier thinner than the coherence length in high-temperature superconductors is realized in the multilayers of YBa 2 Cu 3 O 7-δ and La 0.67 Ca 0.33 MnO 3 . We used epitaxial growth of YBCO on ⟨110⟩ SrTiO 3 substrates by pulsed laser deposition to prepare thin superconducting films with copper oxide planes oriented at an angle to the substrate surface. Subsequent deposition of LCMO and finally a second YBCO layer produces a superconductor/ferromagnet/superconductor trilayer containing an ultrathin ferromagnetic barrier with sophisticated geometry at which the long axis of coherence length ovoid of YBCO is pointing across the LCMO ferromagnetic layer. A detailed characterization of this structure is achieved using high-resolution electron microscopy.

We explore electrodeposited ordered arrays of Fe, Ni, and Co nanorods embedded in anodic alumina membranes as a source of intense magnetic stray field gradients localized at the nanoscale. We perform a multiscale characterization of the stray fields using a combination of experimental methods (magnetooptical Kerr effect and virtual bright field differential phase contrast imaging) and micromagnetic simulations and establish a clear correlation between the stray fields and the magnetic configurations of the nanorods. For uniformly magnetized Fe and Ni wires, the field gradients vary following saturation magnetization of the corresponding metal and the diameter of the wires. In the case of Co nanorods, very localized (∼10 nm) and intense (>1 T) stray field sources are associated with the cores of magnetic vortexes. Confinement of that strong field at extremely small dimensions leads to exceptionally high field gradients up to 10 8 T/m. These results demonstrate a clear path to design and fine-tune nanoscale magnetic stray field ordered patterns with a broad applicability in key nanotechnologies, such as nanomedicine, nanobiology, nanoplasmonics, and sensors.

The science and applications of electronics and optoelectronics have been driven for decades by progress in the growth of semiconducting heterostructures. Many applications in the infrared and terahertz frequency range exploit transitions between quantized states in semiconductor quantum wells (intersubband transitions). However, current quantum well devices are limited in functionality and versatility by diffusive interfaces and the requirement of lattice-matched growth conditions. Here, we introduce the concept of intersubband transitions in van der Waals quantum wells and report their first experimental observation. Van der Waals quantum wells are naturally formed by two-dimensional materials and hold unexplored potential to overcome the aforementioned limitations-they form atomically sharp interfaces and can easily be combined into heterostructures without lattice-matching restrictions. We employ near-field local probing to spectrally resolve intersubband transitions with a nanometre-scale spatial resolution and electrostatically control the absorption. This work enables the exploitation of intersubband transitions with unmatched design freedom and individual electronic and optical control suitable for photodetectors, light-emitting diodes and lasers.

The authors became aware of a mistake in the original version of this Article. Specifically, where discussing the Curie temperature of the amorphous phase, T c , in the 'Thermal characterization' section of the Results and in Fig. 2, the authors should have been discussing the Curie temperature of the magnetic crystalline phases T' c . While the Curie temperature of the glass is lower than previously reported, this error does not affect the original discussion or conclusions of the Article. The authors apologize for the confusion caused by this mistake. In addition to this, there were errors in some of the equations in the main text, and the glass composition. A number of changes have been made in both the PDF and HTML versions of the Article to reflect these errors. A full list of these changes is available online.

Here we report for the first time an efficient fullerene-based compound, FU7, able to act as hole-transporting material (HTM) and electron blocking contact. It has been applied on perovskite solar cells (PSCs), obtaining 0.81 times the efficiency of PSCs with the standard HTM, spiro-OMeTAD, with the additional advantage that this performance is reached without any additive introduced in the HTM layer. Moreover, as a proof of concept, we have described for the first time efficient PSCs in which both selective contacts are fullerene derivatives, to obtain unprecedented "fullerene sandwich" PSCs., (© 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The large plasticity observed in newly developed monolithic bulk metallic glasses under quasi-static compression raises a question about the contribution of atomic scale effects. Here, nanocrystals on the order of 1-1.5 nm in size are observed within an Fe-based bulk metallic glass using aberration-corrected high-resolution transmission electron microscopy (HRTEM). The accumulation of nanocrystals is linked to the presence of hard and soft zones, which is connected to the micro-scale hardness and elastic modulus confirmed by nanoindentation. Furthermore, we performed systematic simulations of HRTEM images at varying sample thicknesses, and established a theoretical model for the estimation of the shear transformation zone size. The findings suggest that the main mechanism behind the formation of softer regions are the homogenously dispersed nanocrystals, which are responsible for the start and stop mechanism of shear transformation zones and hence, play a key role in the enhancement of mechanical properties.

The performance of a monochromated transmission electron microscope with Wien type monochromator is optimized to achieve an extremely narrow energy spread of electron beam and an ultrahigh energy resolution with spectroscopy. The energy spread in the beam is improved by almost an order of magnitude as compared to specified values. The optimization involves both the monochromator and the electron energy loss detection system. We demonstrate boosted capability of optimized systems with respect to ultra-low loss EELS and sub-angstrom resolution imaging (in a combination with spherical aberration correction)., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Microfluidic devices present the basis of modern life sciences and chemical information processing. To control the flow and to allow optical readout, a reliable sensor material that can be easily utilized for microfluidic systems is in demand. Here, we present a new optical readout system for pH sensing based on pH sensitive, photoluminescent glutathione capped cadmium telluride quantum dots that are covalently immobilized in a poly(acrylate) hydrogel. For an applicable pH sensing the generated hybrid material is integrated in a microfluidic sensor chip setup. The hybrid material not only allows in situ readout, but also possesses valve properties due to the swelling behavior of the poly(acrylate) hydrogel. In this work, the swelling property of the hybrid material is utilized in a microfluidic valve seat, where a valve opening process is demonstrated by a fluid flow change and in situ monitored by photoluminescence quenching. This discrete photoluminescence detection (ON/OFF) of the fluid flow change (OFF/ON) enables upcoming chemical information processing.

As a two-dimensional semimetal, graphene offers clear advantages for plasmonic applications over conventional metals, such as stronger optical field confinement, in situ tunability, and relatively low intrinsic losses. However, the operational frequencies at which plasmons can be excited in graphene are limited by the Fermi energy E F , which in practice can be controlled electrostatically only up to a few tenths of an electronvolt. Higher Fermi energies open the door to novel plasmonic devices with unprecedented capabilities, particularly at mid-infrared and shorter-wave infrared frequencies. In addition, this grants us a better understanding of the interaction physics of intrinsic graphene phonons with graphene plasmons. Here, we present FeCl 3 -intercalated graphene as a new plasmonic material with high stability under environmental conditions and carrier concentrations corresponding to E F > 1 eV. Near-field imaging of this highly doped form of graphene allows us to characterize plasmons, including their corresponding lifetimes, over a broad frequency range. For bilayer graphene, in contrast to the monolayer system, a phonon-induced dipole moment results in increased plasmon damping around the intrinsic phonon frequency. Strong coupling between intrinsic graphene phonons and plasmons is found, supported by ab initio calculations of the coupling strength, which are in good agreement with the experimental data.

A novel catalytic system based on covalently modified DNA is described. This catalyst promotes 1,3-dipolar reactions between azomethine ylides and maleimides. The catalytic system is based on the distortion of the double helix of DNA by means of the formation of Pt(ii) adducts with guanine units. This distortion, similar to that generated in the interaction of DNA with platinum chemotherapeutic drugs, generates active sites that can accommodate N -metallated azomethine ylides. The proposed reaction mechanism, based on QM(DFT)/MM calculations, is compatible with thermally allowed concerted (but asynchronous) [π4s + π2s] mechanisms leading to the exclusive formation of racemic endo -cycloadducts.

Single-walled carbon nanotubes (SWCNTs) possessing a confined inner space protected by chemically resistant shells are promising for delivery, storage, and desorption of various compounds, as well as carrying out specific reactions. Here, we show that SWCNTs interact with molten mercury dichloride (HgCl 2 ) and guide its transformation into dimercury dichloride (Hg 2 Cl 2 ) in the cavity. The chemical state of host SWCNTs remains almost unchanged except for a small p-doping from the guest Hg 2 Cl 2 nanocrystals. The density functional theory calculations reveal that the encapsulated HgCl 2 molecules become negatively charged and start interacting via chlorine bridges when local concentration increases. This reduces the bonding strength in HgCl 2 , which facilitates removal of chlorine, finally leading to formation of Hg 2 Cl 2 species. The present work demonstrates that SWCNTs not only serve as a template for growing nanocrystals but also behave as an electron-transfer catalyst in the spatially confined redox reaction by donation of electron density for temporary use by the guests.

The current-induced dynamics of 3D magnetic vortex domain walls in cylindrical Co/Ni nanowires are revealed experimentally using Lorentz microscopy and theoretically using micromagnetic simulations. We demonstrate that a spin-polarized electric current can control the reversible motion of 3D vortex domain walls, which travel with a velocity of a few hundred meters per second. This finding is a key step in establishing fast, high-density memory devices based on vertical arrays of cylindrical magnetic nanowires.

We show that chemical fixation enables top-down micro-machining of large periodic 3D arrays of protein-encapsulated magnetic nanoparticles (NPs) without loss of order. We machined 3D micro-cubes containing a superlattice of NPs by means of focused ion beam etching, integrated an individual micro-cube to a thin-film coplanar waveguide and measured the resonant microwave response. Our work represents a major step towards well-defined magnonic metamaterials created from the self-assembly of magnetic nanoparticles.

Formic acid derived from biomass is known to be used for hydrogen production over Pd catalysts. The effects of preparation variables, structure of the carbon support, surface functional composition on the state of Pd, and catalytic properties of the samples in the vapor-phase decomposition of formic acid were studied. In all catalysts derived from Pd acetate, metal particles visible by conventional TEM had similar sizes, but the adsorption capacity towards CO responded strongly to N-doping of the carbon surface. Moreover, a decrease in the CO/Pd values was accompanied by a significant increase in the reaction rate. Taking account of X-ray photoelectron spectroscopy (XPS) and atomic resolution high-angle annular dark-field scanning transmission electron microscopy (HAADF/STEM) data, the trends observed were assigned to a larger fraction of single electron-deficient Pd atoms in the N-doped samples, which do not adsorb CO but interact with formic acid to produce hydrogen. This was confirmed by extended DFT studies. The obtained results are valuable for the development of Pd catalysts on carbon supports for different processes., (© 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The solution processing of pinhole-free methylammonium lead triiodide perovskite-C 70 fullerene (MAPbI 3 :C 70 ) blend films on fluorine-doped tin oxide (FTO)-coated glass substrates is presented. Based on this approach, a simplified and robust protocol for the preparation of efficient electron-transport layer (ETL)-free perovskite solar cells is described. Power conversion efficiency (PCE) of 13.6 % under AM 1.5 G simulated sunlight is demonstrated for these devices. Comparative impedance spectroscopy and photostability analysis of the MAPbI 3 :C 70 and single MAPbI 3 films compared with conventional compact TiO 2 ETL-based devices are shown. The beneficial impact of using MAPbI 3 :C 70 blend films is emphasized., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Optical activity and circular dichroism are fascinating physical phenomena originating from the interaction of light with chiral molecules or other nano objects lacking mirror symmetries in three-dimensional (3D) space. While chiral optical properties are weak in most of naturally occurring materials, they can be engineered and significantly enhanced in synthetic optical media known as chiral metamaterials, where the spatial symmetry of their building blocks is broken on a nanoscale. Although originally discovered in 3D structures, circular dichroism can also emerge in a two-dimensional (2D) metasurface. The origin of the resulting circular dichroism is rather subtle, and is related to non-radiative (Ohmic) dissipation of the constituent metamolecules. Because such dissipation occurs on a nanoscale, this effect has never been experimentally probed and visualized. Using a suite of recently developed nanoscale-measurement tools, we establish that the circular dichroism in a nanostructured metasurface occurs due to handedness-dependent Ohmic heating.

We present a simple synthesis of iron oxide nanotubes, grown under very mild conditions from a solution containing Fe(II) and Fe(III), on rod-shaped tobacco mosaic virus templates. Their well-defined shape and surface chemistry suggest that these robust bionanoparticles are a versatile platform for synthesis of small, thin mineral tubes, which was achieved efficiently. Various characterization tools were used to explore the iron oxide in detail: Electron microscopy (SEM, TEM), magnetometry (SQUID-VSM), diffraction (XRD, TEM-SAED), electron spectroscopies (EELS, EDX, XPS), and X-ray absorption (XANES with EXAFS analysis). They allowed determination of the structure, crystallinity, magnetic properties, and composition of the tubes. The protein surface of the viral templates was crucial to nucleate iron oxide, exhibiting analogies to biomineralization in natural compartments such as ferritin cages.

Cylindrical magnetic nanowires are attractive materials for next generation data storage devices owing to the theoretically achievable high domain wall velocity and their efficient fabrication in highly dense arrays. In order to obtain control over domain wall motion, reliable and well-defined pinning sites are required. Here, we show that modulated nanowires consisting of alternating nickel and cobalt sections facilitate efficient domain wall pinning at the interfaces of those sections. By combining electron holography with micromagnetic simulations, the pinning effect can be explained by the interaction of the stray fields generated at the interface and the domain wall. Utilizing a modified differential phase contrast imaging, we visualized the pinned domain wall with a high resolution, revealing its three-dimensional vortex structure with the previously predicted Bloch point at its center. These findings suggest the potential of modulated nanowires for the development of high-density, three-dimensional data storage devices.

Hierarchical organization of gold nanorods was previously obtained on a substrate, allowing precise control over the morphology of the assemblies and macroscale spatial arrangement. Herein, a thorough description of these gold nanorod assemblies and their orientation within supercrystals is presented together with a sol-gel technique to protect the supercrystals with mesoporous silica films. The internal organization of the nanorods in the supercrystals was characterized by combining focused ion beam ablation and scanning electron microscopy. A mesoporous silica layer is grown both over the supercrystals and between the individual lamellae of gold nanorods inside the structure. This not only prevented the detachment of the supercrystal from the substrate in water, but also allowed small molecule analytes to infiltrate the structure. These nanocomposite substrates show superior Raman enhancement in comparison with gold supercrystals without silica owing to improved accessibility of the plasmonic hot spots to analytes. The patterned supercrystal arrays with enhanced optical and mechanical properties obtained in this work show potential for the practical implementation of nanostructured devices in spatially resolved ultradetection of biomarkers and other analytes.

We have synthesized nanowires with an iron core and an iron oxide (magnetite) shell by a facile low-cost fabrication process. The magnetic properties of the nanowires can be tuned by changing shell thicknesses to yield remarkable new properties and multi-functionality. A multi-domain state at remanence can be obtained, which is an attractive feature for biomedical applications, where a low remanence is desirable. The nanowires can also be encoded with different remanence values. Notably, the oxidation process of single-crystal iron nanowires halts at a shell thickness of 10 nm. The oxide shell of these nanowires acts as a passivation layer, retaining the magnetic properties of the iron core even during high-temperature operations. This property renders these core-shell nanowires attractive materials for application to harsh environments. A cell viability study reveals a high degree of biocompatibility of the core-shell nanowires.

Magnetic vortex-based media have recently been proposed for several applications of nanotechnology; however, because lithography is typically used for their preparation, their low-cost, large-scale fabrication is a challenge. One solution may be to use arrays of densely packed cobalt nanowires that have been efficiently fabricated by electrodeposition. In this work, we present this type of nanoscale magnetic structures that can hold multiple stable magnetic vortex domains at remanence with different chiralities. The stable vortex state is observed in arrays of monocrystalline cobalt nanowires with diameters as small as 45 nm and lengths longer than 200 nm with vanishing magnetic cross talk between closely packed neighboring wires in the array. Lorentz microscopy, electron holography and magnetic force microscopy, supported by micromagnetic simulations, show that the structure of the vortex state can be adjusted by varying the aspect ratio of the nanowires. The data we present here introduce a route toward the concept of 3-dimensional vortex-based magnetic memories.

Recently, so-called "superlenses", made from metamaterials that are structured on a length scale much less than an optical wavelength, have shown impressive diffraction-beating image resolution, but they use materials with negative dielectric responses, and they absorb much of the light in a way that seriously degrades both the resolution and brightness of the image. Here we demonstrate an alternative "quantum metamaterials" (QM) approach that uses materials structured at the nanoscale, i.e., comparable to an electron wavelength. This allows us to use quantum mechanical design principles to generate structures with a highly elliptical isofrequency dispersion characteristic that circumvents this loss problem. The physics of the loss improvement is analyzed analytically and the QM superlens subdiffraction imaging is modeled numerically, with a finite-element method. Finally, we demonstrate a working QM superlens device, utilizing intersubband transitions between the confined electron states in a III-V semiconductor multiquantum-well. It images down to a resolution of better than ∼ λ/10 and has loss figures improved by roughly a decade over previous "classical" designs. This QM approach is an alternative paradigm for designing radiation-manipulating devices and offers the prospect of practical super-resolving devices at new wavelengths and geometries.

A novel approach to nanoactuation that relies on magnetomechanics instead of the conventional electromechanics utilized in micro and nanoactuated mechanical systems is devised and demonstrated. Namely, nanoactuated magnetomechanical devices that can change shape on command using a remote magnetic external stimulus, with a control at the subnanometer scale are designed and fabricated. In contrast to micro and nanoactuated electromechanical systems, nanoactuated magnetomechanical remote activation does not require physical contacts. Remote activation and control have a tremendous potential in bringing vast technological capabilities to more diverse environments, such as liquids or even inside living organisms, opening a clear path to applications in biotechnology and the emerging field of nanorobotics., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Iron oxide biomineralization occurs in all living organisms and typically involves protein compartments ranging from 5 to 100nm in size. The smallest iron-oxo particles are formed inside dodecameric Dps protein cages, while the structurally related ferritin compartments consist of twice as many identical protein subunits. The largest known compartments are encapsulins, icosahedra made of up to 180 protein subunits that harbor additional ferritin-like proteins in their interior. The formation of iron-oxo particles in all these compartments requires a series of steps including recruitment of iron, translocation, oxidation, nucleation, and storage, that are mediated by ferroxidase centers. Thus, compartmentalized iron oxide biomineralization yields uniform nanoparticles strictly determined by the sizes of the compartments, allowing customization for highly diverse nanotechnological applications., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

A combination of experiments and numerical modeling was used to study the spatial evolution of the ferromagnetic phase transition in a thin film engineered to have a smooth gradient in exchange strength. Mean-field simulations predict, and experiments confirm, that a 100 nm Ni_{x}Cu_{1-x} alloy film with Ni concentration that varies by 9% as a function of depth behaves predominantly as if composed of a continuum of uncoupled ferromagnetic layers with continuously varying Curie temperatures. A mobile boundary separating ordered and disordered regions emerges as the temperature is increased. We demonstrate continuous control of the boundary position with temperature, and reversible control of the magnetization on both sides of the boundary with the magnetic field.

We investigate the temperature-dependent decay kinetics of type II CdSe-CdTe and CdTe-CdSe core-lateral shell nanoplatelets. From a kinetic analysis of the photoluminescence (PL) decay and a measurement of the temperature dependent quantum yield we deduce the temperature dependence of the non-radiative and radiative lifetimes of hetero nanoplates. In line with the predictions of the giant oscillator strength effect in 2D we observe a strong increase of the radiative lifetime with temperature. This is attributed to an increase of the homogeneous transition linewidth with temperature. Comparing core only and hetero platelets we observe a significant prolongation of the radiative lifetime in type II platelets by two orders in magnitude while the quantum yield is barely affected. In a careful analysis of the PL decay transients we compare different recombination models, including electron hole pairs and exciton decay, being relevant for the applicability of those structures in photonic applications like solar cells or lasers. We conclude that the observed biexponential PL decay behavior in hetero platelets is predominately due to spatially indirect excitons being present at the hetero junction and not ionized e-h pair recombination.

This paper describes an aptamer-based optomagnetic biosensor for detection of a small molecule based on target binding-induced inhibition of magnetic nanoparticle (MNP) clustering. For the detection of a target small molecule, two mutually exclusive binding reactions (aptamer-target binding and aptamer-DNA linker hybridization) are designed. An aptamer specific to the target and a DNA linker complementary to a part of the aptamer sequence are immobilized onto separate MNPs. Hybridization of the DNA linker and the aptamer induces formation of MNP clusters. The target-to-aptamer binding on MNPs prior to the addition of linker-functionalized MNPs significantly hinders the hybridization reaction, thus reducing the degree of MNP clustering. The clustering state, which is thus related to the target concentration, is then quantitatively determined by an optomagnetic readout technique that provides the hydrodynamic size distribution of MNPs and their clusters. A commercial Blu-ray optical pickup unit is used for optical signal acquisition, which enables the establishment of a low-cost and miniaturized biosensing platform. Experimental results show that the degree of MNP clustering correlates well with the concentration of a target small molecule, adenosine triphosphate (ATP) in this work, in the range between 10µM and 10mM. This successful proof-of-concept indicates that our optomagnetic aptasensor can be further developed as a low-cost biosensing platform for detection of small molecule biomarkers in an out-of-lab setting., (Copyright © 2015 Elsevier B.V. All rights reserved.)

The synthesis and characterization of a tetraazapentacenequinone fused to two thiadiazoles is reported. This linear derivative constituting seven fused rings shows a very low LUMO level (-4.46 eV) and a low HOMO-LUMO gap (1.77 eV). Its high solubility, endowed by four triisopropylsilyl groups, allows the fabrication of air-stable field-effect transistors by liquid deposition methods that show electron mobilities up to 2.42 × 10(-3) cm(2) V(-1) s(-1) without any device optimization.

We measured and quantified the local electric polarization properties of ultrathin (∼5 nm) biolayers on mm-thick mica substrates. We achieved it by scanning a sharp conductive tip (<10 nm radius) of an electrostatic force microscope over the biolayers and quantifying sub-picoNewton electric polarization forces with a sharp-tip model implemented using finite-element numerical calculations. We obtained relative dielectric constants εr = 3.3, 2.4 and 1.9 for bacteriorhodopsin, dioleoylphosphatidylcholine (DOPC) and cholesterol layers, chosen as representative of the main cell membrane components, with an error below 10% and a spatial resolution down to ∼50 nm. The ability of using insulating substrates common in biophysics research, such as mica or glass, instead of metallic substrates, offers both a general platform to determine the dielectric properties of biolayers and a wider compatibility with other characterization techniques, such as optical microscopy. This opens up new possibilities for biolayer research at the nanoscale, including nanoscale label-free composition mapping.

The adsorption of proteins on surfaces often results in a change of their structural behavior and consequently, a loss of bioactivity. One experimental method to study interactions on a molecular level is single molecular force spectroscopy that permits to measure forces down to the pico-newton range. In this work, the binding force between human serum albumin (HSA), covalently immobilized on glutaraldehyde modified gold substrates, and ibuprofen sodium salt was studied by means of single molecular force spectroscopy. First of all, a protocol was established to functionalize atomic force microscopy (AFM) tips with ibuprofen. The immobilization protocol was additionally tested by quartz crystal microbalance with dissipation (QCM-D) and contact angle measurements. AFM was used to characterize the adsorption of HSA on gold substrates, which lead to a packed monolayer of thickness slightly lower than the reported value in solution. Finally, single molecule spectroscopy results were used to characterize the binding force between albumin and ibuprofen and calculate the distance of the transition state (0.6 nm) and the dissociation rate constant (0.055 s(-1)). The results might indicate that part of the adsorbed protein still preserves its functionality upon adsorption., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Graphene is an attractive material for its physicochemical properties, but for many applications only chemically synthesized forms such as graphene oxide (GO) and reduced graphene oxide (rGO) can be produced in sufficient amounts. If considered as electrode material, the intrinsic defects of GO or rGO may have negative influence on the conductivity and electrochemical properties. Such defects are commonly oxidized sites that offer the possibility to be functionalized with other materials in order to improve performance. In this work, we demonstrate how such ultimately efficient functionalization can be achieved: namely, through controlled binding of very small amount of materials such as RuO2 to rGO by atomic layer deposition (ALD), in this way substituting the native defect sites with RuO2 defects. For the example of a supercapacitor, we show that defect functionalization results in significantly enhanced specific capacitance of the electrode and that its energy density can be stabilized even at high consumption rates.

Here we report an observation of the phenomenon of spatial segregation of two materials in double precursor electron beam induced deposition. Segregation occurs under proper deposition conditions in a single spot illumination due to generic variation of electron current density within an electron beam. Combining precursors for magnetic (dicobaltoctacarbonyl) and non-magnetic (tetraethyl orthosilicate) properties we demonstrate a one-step fabrication process for magnetic tubules at the scale of 100 nm. Electron holography applied on the cross-section of thus prepared tubules reveals the concentration of the magnetic field in the cobalt rich shell, corroborating spatially distributed functionality. We elaborate the numerical model describing the observed phenomenon and defining the conditions for its practical achievement.

The stacking orders in few-layer graphene (FLG) strongly influences the electronic properties of the material. To explore the stacking-specific properties of FLG in detail, one needs powerful microscopy techniques that visualize stacking domains with sufficient spatial resolution. We demonstrate that infrared (IR) scattering scanning near-field optical microscopy (sSNOM) directly maps out the stacking domains of FLG with a nanometric resolution, based on the stacking-specific IR conductivities of FLG. The intensity and phase contrasts of sSNOM are compared with the sSNOM contrast model, which is based on the dipolar tip-sample coupling and the theoretical conductivity spectra of FLG, allowing a clear assignment of each FLG domain as Bernal, rhombohedral, or intermediate stacks for tri-, tetra-, and pentalayer graphene. The method offers 10-100 times better spatial resolution than the far-field Raman and infrared spectroscopic methods, yet it allows far more experimental flexibility than the scanning tunneling microscopy and electron microscopy.

We have studied the electronic properties and the charge carrier mobility of the organic semiconductor tris(1-oxo-1H-phenalen-9-olate)aluminium(III) (Al(Op)3) both experimentally and theoretically. We experimentally estimated the HOMO and LUMO energy levels to be -5.93 and -3.26 eV, respectively, which were close to the corresponding calculated values. Al(Op)3 was successfully evaporated onto quartz substrates and was clearly identified in the absorption spectra of both the solution and the thin film. A structured steady state fluorescence emission was detected in solution, whereas a broad, red-shifted emission was observed in the thin film. This indicates the formation of excimers in the solid state, which is crucial for the transport properties. The incorporation of Al(Op)3 into organic thin film transistors (TFTs) was performed in order to measure the charge carrier mobility. The experimental setup detected no electron mobility, while a hole mobility between 0.6 × 10(-6) and 2.1 × 10(-6) cm(2)·V(-1)·s(-1) was measured. Theoretical simulations, on the other hand, predicted an electron mobility of 9.5 × 10(-6) cm(2)·V(-1)·s(-1) and a hole mobility of 1.4 × 10(-4) cm(2)·V(-1)·s(-1). The theoretical simulation for the hole mobility predicted an approximately one order of magnitude higher hole mobility than was observed in the experiment, which is considered to be in good agreement. The result for the electron mobility was, on the other hand, unexpected, as both the calculated electron mobility and chemical common sense (based on the capability of extended aromatic structures to efficiently accept and delocalize additional electrons) suggest more robust electron charge transport properties. This discrepancy is explained by the excimer formation, whose inclusion in the multiscale simulation workflow is expected to bring the theoretical simulation and experiment into agreement.

We demonstrate detection of DNA coils formed from a Vibrio cholerae DNA target at picomolar concentrations using a novel optomagnetic approach exploiting the dynamic behavior and optical anisotropy of magnetic nanobead (MNB) assemblies. We establish that the complex second harmonic optical transmission spectra of MNB suspensions measured upon application of a weak uniaxial AC magnetic field correlate well with the rotation dynamics of the individual MNBs. Adding a target analyte to the solution leads to the formation of permanent MNB clusters, namely, to the suppression of the dynamic MNB behavior. We prove that the optical transmission spectra are highly sensitive to the formation of permanent MNB clusters and, thereby to the target analyte concentration. As a specific clinically relevant diagnostic case, we detect DNA coils formed via padlock probe recognition and isothermal rolling circle amplification and benchmark against a commercial equipment. The results demonstrate the fast optomagnetic readout of rolling circle products from bacterial DNA utilizing the dynamic properties of MNBs in a miniaturized and low-cost platform requiring only a transparent window in the chip.