Search

Purpose: Osteosynthesis of a clavicular fracture can obtain good clinical results even with conservative treatment. The development of surgical techniques and improvements in internal fixation have led to the use of metal plates and screws. Although there are intramedullary nails or minimally invasive plate osteosynthesis that can reduce soft tissue damage, these techniques are not used often because most require a skin incision about the length of the metal plate to be inserted. This study compared the postoperative pain to determine the appropriate injection depth. Materials and Methods: A prospective, single-institute, single-blind, randomized study was designed. The patients in the study had clavicular fractures and who underwent the removal of implant. The patients judged to have difficulty indicating pain were excluded. Ropivacaine was injected between plate fixation and muscle suturing. The visual analog scale (VAS) pain score, patient-controlled analgesia (PCA) use, and additional pain medication usage were measured after surgery and every 4 hours. Results: Thirty-four clavicle shaft fracture patients were classified into 16 patients in the subcutaneous injection group and 18 in the muscle injection group. Seventeen implant removal patients were divided into eight patients in the subcutaneous injection group and another nine in the muscle injection group. In the fracture group, the mean VAS for the subcutaneous injection group was 4.20±2.68 immediately after surgery, 4.47±1.85 at 4 hours, 1.93±1.44 at 24 hours, and 1.60±1.35 at 48 hours. The mean VAS for the muscle injection group was 4.23±1.59 immediately after surgery, 3.00±1.47 at 4 hours, 1.69±1.03 at 24 hours, and 1.31±1.11 at 48 hours; the mean VAS score was not statistically significant in the two groups (p=0.332). In the implant removal group, the mean VAS for the subcutaneous injection group was 4.75±1.58 immediately after surgery, 3.75±1.04 at 4 hours, 1.75±0.89 at 24 hours, and 1.75±0.89 at 48 hours. The mean VAS for the muscle injection group was 3.78±1.20 immediately after surgery, 3.22±0.83 at 4 hours, 1.89±1.17 at 24 hours, and 1.11±1.01 at 48 hours; the mean VAS score was not statistically significant in the two groups (p=0.181). Conclusion: The postoperative VAS pain score and PCA usage were not statistically significant regardless of the ropivacaine injection site in clavicular surgery, but each group had significantly different VAS pain scores and PCA usage according to time after surgery. In addition, the muscle injection group tended to have a lower average VAS than the subcutaneous injection group in the implant removal patient group. [ABSTRACT FROM AUTHOR]

Direct common carotid puncture (DCP) is conventionally used as a bailout technique in stroke patients. However, little is known about the relevant anatomy. Our objective was to examine the relationship of the common carotid artery (CCA) to surrounding structures based on different DCP trajectories passing through the artery's center. Fifty randomly selected head/neck CTAs were analyzed. The trajectory of DCP and relationship to the internal jugular vein (IJV) and thyroid were analyzed at 1 cm intervals above the clavicle on 7 axial sections. Using the trans-carotid sagittal plane as the 0° trajectory, we plotted 3 additional trajectories at 30° intervals and the relationship with the IJV and thyroid proximity was graded as following: 0 = absent, 1 = adjacent, and 2 = crossing. The CCA tortuosity index was also analyzed for each vessel. Analysis of 2800 trajectories across 100 CCAs showed that the IJV and thyroid were least encountered on the axial sections 2 cm above the clavicle, at 0° on the right (9 thyroids and 6 IJV), and at 90° on the left (0 Thyroids and 14 IJVs). The tortuosity index of the CCA was significantly lower above the clavicle than its entire length (P < 0.001). DCP performed 2 cm above the clavicle at 0° on the right, and 90° on the left appears to minimize encounters with the IJV and thyroid gland, reducing potential complications. However, despite these findings, ultrasound guidance remains vital for DCP safety. Further focus on endovascular device safety in DCP is needed. [ABSTRACT FROM AUTHOR]

Background: Minimally invasive plate osteosynthesis (MIPO) for clavicular shaft fracture yields favorable functional outcomes and results in less surgery-related soft tissue injury than other techniques. Anterior chest and shoulder skin numbness, a common complication after open reduction and plate fixation, is related to injury to the supraclavicular nerves. We propose MIPO combined with a mini-open approach without fluoroscopy for nerve preservation to minimize the risk of postoperative numbness compared with traditional open plating without nerve preservation. Methods: A total of 59 patients were retrospectively identified, with a follow-up period of 6 months. Thirty-two patients underwent MIPO with mini-open and nerve preservation technique (MIPO group), and 27 patients underwent traditional open plating without nerve preservation (open group). Constant–Murley shoulder outcome score, operation time, wound length, skin numbness, and number of implant removals were compared between the groups. Results: The MIPO group had significantly lower rates of anterior chest and shoulder skin numbness than the open group (MIPO: 12.5% vs. open: 55.6%; p < 0.001). Operation time was significantly longer in the MIPO group than in the open group (MIPO: 109.38 ± 18.83 vs. open: 81.48 ± 18.85; p < 0.001). Wound length was significantly shorter in the MIPO group than in the open group (MIPO: 4.73 ± 0.79 vs. open: 9.76 ± 1.64; p < 0.001). Both groups had similarly excellent Constant–Murley shoulder scores. There were significantly fewer implant removals in the MIPO group than in the open group (MIPO: 6.3% vs. open: 25.9%; p = 0.036). Neither group experienced any infection, implant failure, or nonunion. Conclusions: Our technique combining MIPO with the mini-open approach and supraclavicular nerve preservation yields a lower incidence of skin numbness than traditional open plating without nerve preservation. [ABSTRACT FROM AUTHOR]

Background: Stress injuries are often missed secondary to their insidious onset, milder symptoms, and subtle or initially absent findings when imaged. Main Body: This review aims to provide strategies for evaluating and treating upper extremity stress fractures. This article outlines the classic presentation of each fracture, the ages during which these injuries often occur, the relevant anatomy and biomechanics, and the mechanism of each injury. Diagnostic imaging and management principles are also discussed, including the use of conservative versus surgical management techniques. Short Conclusion: Upper extremity stress fractures are often mild injuries that resolve with conservative management but can lead to more serious consequences if ignored. Given their increasing incidence, familiarity with diagnosis and management of these injuries is becoming increasingly pertinent. Key Points: Stress injuries are often missed secondary to their insidious onset, milder symptoms, and subtle or initially absent findings when imaged. This review aims to provide strategies for evaluating and treating upper extremity stress fractures. [ABSTRACT FROM AUTHOR]

Standard plain film medical radiographs often form a valuable line of evidence to identify individuals in large‐scale fatality events. While commonly available, chest radiographs present a challenge that their analysis is somewhat more involved and complex than radiographic records of other body regions. For example, chest radiographs concern subtler morphological varieties of smaller anatomical features across a larger number of skeletal elements in contrast to frontal sinus comparisons that concern a large, (often) single, highly variable void within one bone. This does not detract from or discount chest radiographs as useful identification aids, but it does demand additional prerequisite skills in radiographic interpretation to ensure valid conclusions are attained. When subjects deviate from standardized antemortem (AM) radiographic positions and/or the image quality decreases, the complexity of a chest radiograph comparison is elevated. Generally, the current body of forensic radiographic comparison literature infrequently addresses these more complex circumstances. In this paper, we use real‐world radiographic comparison reference images from a military DVI repatriation context to illustrate these factors and outline some procedures that enable these complexities to be easily recognized and appropriately addressed at case examination. A report for an exemplar case that concurrently highlights multiple factors is presented. For novices learning radiographic comparison methods, this case review saliently demonstrates: (1) why the AM reference radiograph(s) drive(s) the radiographic comparison procedure; (2) why care should be taken for correct positioning of the cervicothoracic junction in postmortem radiography of chest elements. [ABSTRACT FROM AUTHOR]

The prevalence of acromial fracture after reverse total shoulder arthroplasty (RSA) is reportedly 2.6%-8.4%, and clinical outcomes differ among fracture sites. However, few studies have investigated the factors affecting fracture sites. This study aimed to reproduce acromial fractures after RSA by replicating the postoperative displacement of the humerus using finite element models (FEMs), and to investigate the effect of humeral displacement on the fracture site. Six patients (mean age, 76.3 ± 7.9 years; 5 women and 1 man) with acromial fractures after RSA treated at our institution were included. Among them, 3 had Levy Type 1 fractures, whereas the other 3 had Levy Type 2 fractures. Preoperative computed tomography data were used to create a 3-dimensional FEM. All elements within the proximal 2 cm of the clavicle and the scapular body were completely constrained. The entire humerus was forcibly displaced following its displacement after RSA, as measured by preoperative and postoperative computed tomography. The fracture sites, total displacement, external constraint of the humerus at the initial fracture, and bone density from the acromion to the scapular spine were investigated. Values of P <.05 were considered statistically significant in tests of statistical inference but were interpreted as reference values due to the small number of cases. There were no major differences in humeral displacement between Type 1 and Type 2 fractures. Although the fracture sites in the FEM were slightly more medial than the actual fracture sites, they were similar. The total displacement and external constraint of the humerus at the initial fracture were similar in Type 1 and Type 2 fractures. The distribution of bone density from the acromion to the scapular spine differed between fracture types. We were able to reproduce acromial fractures after RSA by replicating humeral displacement using FEM. The extent and direction of humeral displacement may not significantly affect the acromial fracture site, whereas the bone density distribution from the acromion to the scapular spine may affect it. [ABSTRACT FROM AUTHOR]

Several terminologies exist for a vestigial muscle connecting the clavicle to the cervical vertebrae; however, "levator claviculae muscle" and "cleidocervical muscle" are commonly found in the contemporary literature. The term "levator claviculae" does not determine the location of the superior insertion point, but rather describes a single function of the muscle. However, similar to the sternocleidomastoid muscle, the bilateral presence of this muscle could result not only in increased strength for elevating the clavicle, but also in enhanced neck flexion and greater neck stability. To provide anatomical precision, the muscle could be more accurately termed the cleidocervical muscle. This literature review was performed using "PubMed" as the search engine. Mesh terms such as levator AND claviculae, cleidocervicalis, cleidocervical, cleidoatlanticus, and cleidotrachelian were used. Our proposal for a precise methodology in addressing the terminology would be as follows: [Position 1: cleidocervical muscle] [Position 2: vertebra levels]. In this opinion paper, we advocate for the anatomical community to discontinue the use of the term "levator claviculae" and instead adopt the more appropriate "cleidocervical muscle" in academic discourse. [ABSTRACT FROM AUTHOR]

Perinatal clavicular fracture is the most common birth injury that may cause neonatal morbidities such as obstetric brachial palsy (OBP) ranging from 0.2 to 3.5%. We aimed to compare the relationship between perinatal clavicular fracture and induced vaginal delivery. All the live births and the neonatal outpatient clinic admissions between June 2016 and December 2022 have been investigated retrospectively. A total of 185 newborn infants with a mean gestational age of 38.3±1.6 weeks and a mean birth weight of 3,451±430.10 grams were enrolled. When compared to all in-born live births, the overall incidence of clavicular fracture was 0.78%. One hundred eighty-one (97.8%) infants were born vaginally and 4 (2.2%) were born by cesarean sections (C-sections). The incidence of clavicular fracture among in-born vaginally delivered infants was 1.26% (n=153) and among C-section deliveries was 0.04% (n=3). In vaginal deliveries, 54.7% (n=99) had prolonged labor, 71.8% (n=130) had received labor induction and 7.7% (n=14) had a history of instrumental intervention. A statistically significant relationship was found between clavicular fracture and prolonged labor, labor induction, increased birth weight, and low Apgar scores (p<0.001). While 21 infants (11.4%) had cephalohematoma, 8 infants (4.3%) presented with symptoms of OBP. Although high birth weight, prolonged labor, and ventouse delivery are the already known major risk factors for neonatal clavicular fractures, induced vaginal delivery has been defined as a new and important risk factor. Induction of labor should be decided when the benefits of immediate delivery outweigh the risks of continuing the pregnancy for fetal and maternal health. [ABSTRACT FROM AUTHOR]

Objective: To evaluate whether the CT attenuation of bones seen on shoulder CT scans could be used to predict low bone mineral density (BMD) (osteopenia/osteoporosis), and to compare the performance of two machine learning models to predict low BMD. Methods: In this study, we evaluated 194 patients aged 50 years or greater (69.2 ± 9.1 years; 170 females) who underwent unenhanced shoulder CT scans and dual-energy X-ray absorptiometry within 1 year of each other between January 1, 2010, and December 31, 2021. The CT attenuation of the humerus, glenoid, coracoid, acromion, clavicle, first, second, and third ribs was obtained using 3D-Slicer. Support vector machines (SVMs) and k-nearest neighbours (kNN) were used to predict low BMD. DeLong test was used to compare the areas under the curve (AUCs). Results: A CT attenuation of 195.4 Hounsfield Units of the clavicle had a sensitivity of 0.577, specificity of 0.781, and AUC of 0.701 to predict low BMD. In the test dataset, the SVM had sensitivity of 0.686, specificity of 1.00, and AUC of 0.857, while the kNN model had sensitivity of 0.966, specificity of 0.200, and AUC of 0.583. The SVM was superior to the CT attenuation of the clavicle (P = .003) but not better than the kNN model (P = .098). Conclusion: The CT attenuation of the clavicle was best for predicting low BMD; however, a multivariable SVM was superior for predicting low BMD. Advances in knowledge: SVM utilizing the CT attenuations at many sites was best for predicting low BMD. [ABSTRACT FROM AUTHOR]

Introduction: The purpose of this prospective study was to report the outcomes of two different methods in CC and AC reconstruction for the treatment of AC separation using a tendon graft and knot-hiding titanium clavicular implant. Materials and methods: Twenty-seven patients with Rockwood grade III and V acromioclavicular (AC) separations were randomized into two groups. The primary outcome was whether taking the tendon graft through the coracoid risked a fracture. The following were secondary outcomes: follow-up of clavicular wound healing and Nottingham Clavicle score, Constant score, and Simple Shoulder Test results obtained preoperatively and 24 months postoperatively. The anteroposterior radiographic change between the clavicular and coracoid cortexes and the clavicular tunnel diameter was measured postoperatively and 24 months postoperatively. General patient satisfaction with the outcome (poor, fair, good, or excellent) was assessed 2 years postoperatively. Results: No coracoid fractures were detected. No issues in clavicular wound healing were detected. The mean Nottingham Clavicle score increased from a preoperative mean of 42.42 ± 13.42 to 95.31 ± 14.20 (P < 0.00). The Constant score increased from a preoperative mean of 50.81 ± 17.77 to 96.42 ± 11.51 (P < 0.001). The Simple Shoulder Test score increased from a preoperative mean of 7.50 ± 2.45 to 11.77 ± 1.18 (P < 0.001). The changes were significant. The coracoclavicular distance increased from 11.88 ± 4.00 to 14.19 ± 4.71 mm (P = 0.001), which was significant. The clavicular drill hole diameter increased from 5.5 to a mean of 8.00 ± 0.75 mm. General patient satisfaction was excellent. Conclusions: There were no significant differences between the two groups. There were no implant related complications in the clavicular wound healing. The results support the notion that good results are achieved by reconstructing both the CC and AC ligaments with a tendon graft. Study registration: This clinical trial was registered on Clinicaltrials.gov. [ABSTRACT FROM AUTHOR]

Background: Clavicular midshaft fractures treated with titanium plates may encounter complications like implant failure. We assess if alternative biocompatible materials suchs as PLA, PLA/HA, PEEK offer comparable stability. Our study evaluates the biomechanical performance of these materials in surgical management of midshaft clavicle fractures. Methods: We simulated a personalized fixation implant with four different materials and conducted finite element analysis in ANSYS to assess maximum von Mises stress (MvMs). Results: The MvMs occurring on the plates, screws, clavicle, and fracture site were recorded. MvMs on titanium material at the 6th hole level (764.79 MPa) and the 6th screw level (503.38 MPa), with the highest stresses observed at 48.52 MPa on the lateral clavicle at the 1st hole level and 182.27 MPa on the medial clavicle at the 6th hole level. In PLA material analyses, the highest MvMs were observed at the 3rd hole level (340.6 MPa) and the 3rd screw level (157.83 MPa), with peak stresses at 379.63 MPa on the lateral clavicle fracture line and 505.44 MPa on the medial clavicle fracture line. In PLA/HA material analyses, the highest MvMs were at the 3rd hole (295.99 MPa) and 3rd screw (128.27 MPa), with peak stresses at 220.33 MPa on the lateral clavicle and 229.63 MPa on the medial clavicle fracture line. In PEEK material analyses, the highest MvMs were at the 3rd hole (234.74 MPa) and 6th screw (114.48 MPa), with peak stresses at 184.36 MPa on the lateral clavicle and 180.1 MPa on the medial clavicle. Conclusion: Our findings indicate that titanium material shows significantly higher stresses on plates and screws compared to those on the clavicle, suggesting a risk of implant failure. PLA and PLA/HA were inadequate for fixation. Although stress on the plate with PEEK material is higher than on the clavicle, it remains lower than titanium, indicating potential stability at fracture site. Further research is needed to confirm these findings. [ABSTRACT FROM AUTHOR]

Objectives: This study aimed to compare 24-month radiographic follow-ups of clavicular tunnel widenings (CTWs) and coracoclavicular distances (CCDs) and examine correlations between these measurements in patients following combined coracoclavicular stabilization and acromioclavicular capsule repair in treatment of acute high-grade acromioclavicular joint injury. Methods: This retrospective study reviewed the records of patients with acute Rockwood type V acromioclavicular joint injury who underwent surgery within 3 weeks after their injury. All patients had follow-ups at 3 and 6 months and 1 and 2 years. The CTWs were measured on anteroposterior radiographs between the medial and lateral borders at the superior, middle and inferior levels of the tunnels. On anteroposterior radiographs of both clavicles, the CCDs were measured at the shortest distance between the upper border of the coracoid process and the inferior border of the clavicle and reported as the CCD ratio, which was defined as the ratio of the affected and unaffected clavicles. At the final follow-ups, clinical outcomes were assessed using American Shoulder and Elbow Surgeons (ASES) scores. Results: This study included seventeen men and six women with a mean age of 47.26 ± 10.68 years. At the final follow-ups, the mean ASES score of all patients was 95.28 ± 3.62. We found a significant correlation between the increase in the CTWs and the increase in the CCD ratios (Spearman's rho correlation coefficient range 0.578–0.647, all p-values < 0.001). Conclusions: We found long-term postoperative widening of the clavicular tunnels, which correlated positively with a gradual postoperative decline in the acromioclavicular joint alignment reductions. [ABSTRACT FROM AUTHOR]

(1) Background: Although most brachial plexus birth palsies show some spontaneous recovery, secondary operations are likely to follow. Accordingly, due to the loss of muscle innervation, the growth of the affected limb and the shoulder girdle is reduced. This is associated with pathological scapula positioning and rotation. The objective of this work was to clarify the relationship between length differences of the two clavicles and different types of scapular dyskinesia. (2) Methods: Twenty-five patients suffering from brachial plexus birth palsy were included in this retrospective study. There were eighteen female and seven male patients with a mean age of 10 years (2 to 23 years). CT scans of the thoracic cage, including both shoulder joints and both clavicles, were obtained preoperatively between 2010 and 2012. Radiographic measurements were taken of the axial plane and 3D reconstructions were produced. Functional evaluations of possible movement and scapular dyskinesia were performed. (3) Results: We found an increasing difference in the length of the clavicle (both in absolute and relative terms) in the children with more pronounced scapular dyskinesia. Additionally, with increasing clavicle length differences, the scapula was positioned in a deteriorated angle compared to the healthy side. Significant positive correlations were identified for the age and absolute difference of the clavicle length and the length and width of the scapula on the affected side. (4) Conclusion: Scapular dyskinesia, which is a common finding in brachial plexus birth palsy, is strongly related to reduced clavicle growth. Reduced clavicle length (which is a relatively easily examinable parameter) compared to the healthy side can be used to estimate the extent of scapular malpositioning on the thoracic cage. The extent and severity of scapular dyskinesia increases with augmented differences in the length of the clavicle. [ABSTRACT FROM AUTHOR]

Introduction: Fractures of the clavicle are common injuries with an incidence of 5%–10% of all fractures. The most common site of fracture in clavicle is the middle third and accounts for approximately 70%–80% of all clavicle fractures. Clavicle fractures are usually associated with some degree of displacement. Displaced midshaft clavicle fractures can cause significant persistent disability, even if they heal uneventfully when treated conservatively. Surgery is required in case of significant fracture displacement and associated neurovascular injuries. Fractures that require internal fixation are usually treated by plate osteosynthesis as the standard procedure. Intramedullary fixation with titanium elastic nailing system (TENS) is an increasingly popular technique for the internal fixation of displaced mid-clavicular fractures. It is a better fixation device for simple displaced midshaft clavicle fractures. Methodology: A prospective study was conducted with a sample size of 20 patients for 18 months. After obtaining approval and clearance from the institutional ethics committee, the patients fulfilling the inclusion criteria were enrolled for the study after obtaining informed consent. A thorough clinical examination of the patient was done. The diagnosis was made based on X-ray findings. All patients underwent routine preoperative investigations, and their fitness for surgery was taken. The surgery was performed under general or regional anesthesia. Constant–Murley score was used to evaluate the outcome of the study. The cases were followed for a minimum period of 6 months following surgery at the regular intervals of 6, 12, and 24 weeks. Results: The functional outcome in 17 patients was excellent with the union of the fracture site. In one case, there was fixation failure and it had to be converted into plate fixation and was excluded from the study. In four patients, there was hardware prominence at the entry site. Conclusion: TENS is a good internal fixation option for simple displaced midshaft clavicle fractures to reduce the duration of the surgery, decrease the surgical site morbidity, and early mobilization.

Abstract Background Stress injuries are often missed secondary to their insidious onset, milder symptoms, and subtle or initially absent findings when imaged. Main Body This review aims to provide strategies for evaluating and treating upper extremity stress fractures. This article outlines the classic presentation of each fracture, the ages during which these injuries often occur, the relevant anatomy and biomechanics, and the mechanism of each injury. Diagnostic imaging and management principles are also discussed, including the use of conservative versus surgical management techniques. Short Conclusion Upper extremity stress fractures are often mild injuries that resolve with conservative management but can lead to more serious consequences if ignored. Given their increasing incidence, familiarity with diagnosis and management of these injuries is becoming increasingly pertinent.

The aim of this study was to investigate the potential of using multidetector computed tomography (MDCT) to measure the bone mineral density (BMD) in the medial meta-epiphyseal region of clavicle (MERC) for adult age estimation. A total of 1064 chest MDCT scans from individuals aged 21 to 102 years were utilized to determine the MERC BMD. The Mimics software was used for the BMD measurements, and the average BMD of both MERC was also calculated. Regression analysis was conducted with chronological age as a dependent variable and MERC BMD as an independent variable to establish a mathematical model for age estimation. The mean absolute error (MAE) was calculated to evaluate the accuracy of the regression model using an independent validation sample. Among all the models, the cubic regression model showed the highest correlation between MERC BMD and chronological age and also provided the most accurate age prediction for both males and females (MAE = 9.41 for males, MAE = 10.38 for females). Our study suggests that BMD measured by MERC can be utilized for age estimation in adults when more reliable indicators are not available. [ABSTRACT FROM AUTHOR]

In forensic age estimation, CT imaging of the clavicles is used to determine an age over completed 21 years. If ossification of the medial clavicular epiphysis is complete, young men are assumed to be over 21 years of age. The aim of this study is to check the statistical parameters (specificity, predictive probability) for the characteristic "completed ossification of the medial clavicles". 285 male patients who, for various reasons, received a chest CT at the Medical Center of the University of Freiburg between 1st December 2019 and 6th December 2022 were screened for the study, of whom 203 patients were included in the study. The stage of clavicular ossification was classified as stage 1 – 5 according to Schmeling. While 70 out of 71 patients under 21 years of age were correctly estimated to be under 21 years of age, there was one patient whose ossification on one side was classified as stage 4 and who would therefore have been estimated to be over 21 years of age. If only subjects whose ossification stage was the same on both sides are included, the specificity of the test method is 100% and the positive predictive probability is 100%. If patients for whom only one side is stage 4 are also included, the specificity is 98.6%. Thus, only the complete and symmetrical ossification of both clavicles (stage 4 according to the Schmeling classification) in a standardised thin-layer CT can be classified as a reliable indicator of an age over 21 years in young men. In the case of asymmetric ossification of the medial clavicles (stage 4 is not reached on one side), false positive evaluations and the incorrect assumption of an age over 21 years can occur. [ABSTRACT FROM AUTHOR]

Background: It is aimed to compare the block onset times and performance features of costoclavicular techniques (medial and lateral approach) versus lateral sagittal technique. Methods: Patients were randomized into three groups. For costoclavicular techniques, ultrasound probe was placed parallel to clavicle obtaining nerve cords, axillary artery and axillary vein visual from lateral-to-medial, respectively. The block needle was advanced from lateral (Group CLB) or medial (Group CMB) to perform costoclavicular block. For lateral sagittal technique (Group LSB), ultrasound probe was placed sagittal and perpendicular below the coracoid process to obtain sagittal artery image with the cords around. Total 20 ml of 0.5% bupivacaine and 10 ml of 2% lidocaine were deposited for all groups. Sensory and motor block onset times, block performance properties, complications, and patient/surgeon satisfactions were investigated. Results: Among 56 patients, the primary outcome, sensory block onset time was shorter in Group CLB than Group CMB and Group LSB (10 [5–15], 10 [10–20], and 15 [10–15] minutes, respectively, p < 0.05). Motor block onset was also fastest in Group CLB (15 [10–20] mins for CLB, 20 [15–20] mins for LSB, and 22.5 [15–25] mins for CMB, p = 0.004). Block performance properties did not differ between the groups. The only complication observed was vascular puncture with an incidence of 28% in Group CMB. Conclusions: Lateral approach costoclavicular technique provides fastest block onset than the other techniques. Considering the success and safety profile, this technique stands as a good alternative in clinical practice. Trial registration: This study is prospectively registered to clinicaltrials.gov on 20/02/2022 (NCT05260736). [ABSTRACT FROM AUTHOR]

Purpose: We aimed to evaluate the clinical and radiological outcomes of double plate fixation for failed clavicle shaft fracture surgery. Materials and methods: We analyzed 14 patients who underwent double plate fixation due to plate failure after clavicle shaft fracture surgery from March 2016 to March 2021. The study used 3.5 mm locking compression plates for superior clavicle and anterior reconstruction in all patients. In addition, moldable allograft bone was used to fill the bone defect. Clinical and radiological evaluation was performed immediately, at 2 and 4 weeks, and 3, 6, 9, and 12 months postoperatively. The visual analog scale (VAS), University of California at Los Angeles (UCLA) shoulder scale, and American Shoulder and Elbow Surgeons (ASES) scores and range of motion of the shoulder were evaluated as clinical results. For radiological evaluation, anteroposterior, caudal, and cephalad views of both clavicles were used. Successful bone union was defined as complete adjoining of the fracture site through callus formation. Results: Successful bone union was achieved in all patients, and the mean time to bone union was 16.7 ± 1.2 weeks (range, 12–24 weeks). Statistically significant improvement in forward flexion and external and internal rotation was observed from 135.5° ± 6.3, 45.2° ± 5.3, and 13° ± 2.3 preoperatively to 157.0° ± 9.3, 68.7° ± 6.3, and 9.8° ± 3.1 at the final follow-up, respectively. The VAS score improved from an average of 6.2 ± 2.8 preoperatively to 1.3 ± 0.7 at the final follow-up, which was statistically significant (P = 0.018). In addition, the ASES score significantly increased from a mean of 52.1 ± 6.3 points preoperatively to 83.6 ± 7.8 points at the final follow-up (P = 0.001). The average UCLA shoulder score was 16.7 ± 1.4 and 31.4 ± 2.2 points preoperatively and at the final follow-up, respectively, which was statistically significant (P = 0.001). Conclusion: Double plate fixation has shown good results after failed open reduction and internal fixation (ORIF) for clavicle shaft fractures. Therefore, in complicated situations after ORIF, double plate fixation is considered a surgical treatment option. [ABSTRACT FROM AUTHOR]

This article discusses a case of a stress fracture in the clavicle associated with sternocostoclavicular hyperostosis (SCCH) in a patient. SCCH is a chronic inflammatory disease that affects the sternocostoclavicular region. The patient experienced pain, swelling, and redness in the clavicle, and conservative treatment with a clavicle band and corticosteroids resulted in symptom improvement. However, bone fusion was not complete after eight months, highlighting the need for careful follow-up. This case highlights the rare occurrence of marked ossification of the lateral part of the clavicle in SCCH patients. [Extracted from the article]

The human clavicle's unique S-shaped, three-dimensional structure complicates fracture management. This study evaluated the anatomical conformity of pre-contoured anatomical plates using 3D-printed clavicle models. CT scans from 30 patients (15 males and 15 females) were used to create these models. Three brands of distal clavicle plate systems (Acumed, Synthes, and Arthrex) were tested for fit. Measurements included the distance from the distal end of the clavicle to the plate's lateral end, the gap between the clavicle and the plate, and the overhang distance. Results showed significant differences in clavicle length between sexes, with men having a mean length of 156.1 ± 7.6 mm and women 138.4 ± 4.3 mm, both with normal distribution (p > 0.05). The mean lateral distance was 7.9 ± 1.7 mm, and the mean medial gap was 3.6 ± 3.0 mm, showing no significant differences between products or sexes. The mean overhang distance was 5.8 ± 4.6 mm, with larger values in women for the Acumed (p = 0.037) and Arthrex (p = 0.000) plates. Overall, pre-contoured plates exhibited notable discrepancies, especially in shorter clavicles. [ABSTRACT FROM AUTHOR]

Background: Radiological age assessment using reference studies is inherently limited in accuracy due to a finite number of assignable skeletal maturation stages. To overcome this limitation, we present a deep learning approach for continuous age assessment based on clavicle ossification in computed tomography (CT). Methods: Thoracic CT scans were retrospectively collected from the picture archiving and communication system. Individuals aged 15.0 to 30.0 years examined in routine clinical practice were included. All scans were automatically cropped around the medial clavicular epiphyseal cartilages. A deep learning model was trained to predict a person's chronological age based on these scans. Performance was evaluated using mean absolute error (MAE). Model performance was compared to an optimistic human reader performance estimate for an established reference study method. Results: The deep learning model was trained on 4,400 scans of 1,935 patients (training set: mean age = 24.2 years ± 4.0, 1132 female) and evaluated on 300 scans of 300 patients with a balanced age and sex distribution (test set: mean age = 22.5 years ± 4.4, 150 female). Model MAE was 1.65 years, and the highest absolute error was 6.40 years for females and 7.32 years for males. However, performance could be attributed to norm-variants or pathologic disorders. Human reader estimate MAE was 1.84 years and the highest absolute error was 3.40 years for females and 3.78 years for males. Conclusions: We present a deep learning approach for continuous age predictions using CT volumes highlighting the medial clavicular epiphyseal cartilage with performance comparable to the human reader estimate. [ABSTRACT FROM AUTHOR]

Introduction: A spiral clavicle plate has been accepted for its superior multidirectional compatibility in the treatment of midshaft clavicle fractures from a biomechanical perspective. However, the influence of the sextant angle (spiral level) definition on biomechanical performance has not been clarified. A conceptual finite element analysis was conducted to identify the advantages and drawbacks of spiral clavicle plates with various sextant angle definitions. Methods: Conventional superior and three different conceptual spiral plates with sextant angle definitions ranging from 45 to 135 degrees were constructed to restore an OTA 15-B1.3 midshaft clavicle fracture model. Three major loading scenarios (cantilever downward bending, axial compression, and axial torsion) were simulated to evaluate the reconstructed structural stiffness and the stress on the clavicle plate and bone screws. Results: The spiral clavicle plate demonstrated greater capability in resisting cantilever downward bending with an increase in sextant angle and showed comparable structural stiffness and implant stress compared to the superior clavicle plate. However, weakened resistance to axial compression load was noted for the spiral clavicle plate, with lowered stiffness and increased stress on the clavicle plate and screws as the spiral level increased. Conclusion: The spiral clavicle plate has been reported to offer multidirectional compatibility for the treatment of midshaft clavicle fractures, as well as geometric advantages in anatomical matching and reduced skin prominence after surgery. The current study supports that remarkable cantilever bending strength can be achieved with this plate. However, users must consider the potential drawback of lowered axial compression resistance in safety considerations. [ABSTRACT FROM AUTHOR]

The acromioclavicular joint frequently experiences dislocations and fractures with ligament injuries during traumatic shoulder injuries, with clavicle hook plate fixation being a common treatment method. However, no studies have been conducted on the biomechanical analysis of plates and the average Korean clavicle–acromion dimensions. In this study, finite element analysis (FEA) was used to assess various parameters for biomechanical analysis. To assess the stress distribution in the acromion, clavicle, and plate, FEA models with the implantation of 36 clavicle hook plate models with different hook depths (12 mm, 15 mm, and 18 mm), hook lengths (15 mm, 17 mm, and 19 mm), and hook angles (90°, 95°, 100°, and 105°) were established. Moreover, three-dimensional chest computed tomography (CT) images and scanned CT image data were used for comparisons between the average Korean clavicle–acromion dimensions and the model dimensions. The study shows that the acromion experienced the least stress when the clavicle hook plate had dimensions of 12 mm depth, 19 mm length, and 105° angle. For the clavicle, the lowest stress occurred with a depth of 15 mm, length of 19 mm, and 105° angle. Additionally, the lowest stress on the clavicle hook plate was observed with dimensions of 18 mm depth, 19 mm length, and 100° angle. Based on the results, orthopedic surgeons can make an optimal selection for the plate geometry suitable for the bone length of each patient, which can reduce the incidence of adverse events, such as peri-plate fractures at the acromion or clavicle and postoperative pain due to the burrowing of the plate hook into the acromion. [ABSTRACT FROM AUTHOR]

Purpose: To evaluate joint reduction (loss of reduction [LOR]; dynamic posterior translation [DPT]) and clavicular tunnel widening (cTW) in patients treated with arthroscopically‐assisted acromioclavicular joint (ACJ) stabilization after previously failed nonoperative versus surgical treatment. Methods: Patients undergoing arthroscopically‐assisted ACJ stabilization (bidirectional tendon allograft with a low‐profile TightRope) after previously failed nonoperative versus surgical treatment were included retrospectively. Bilateral anteroposterior stress views served for evaluating LOR (side‐comparative coracoclavicular distance [CCD]) and cTW at a 6‐weeks‐ and 6‐months‐follow‐up (FU) and for evaluating the filling ratio (FR, vertical device insertion depth relative to clavicle height) at the 6‐weeks‐FU. Postoperative DPT was assessed on Alexander's views. Results: Twenty‐seven patients (20 male, mean age 46.1 ± 14.8 years) were included (prior treatment: nonoperative: n = 15; surgical: n = 12). There were no differences in LOR, DPT or cTW between groups postoperatively. Initial CCD‐symmetry at the 6‐weeks‐FU (CCD: −0.1 mm [95% confidence interval, CI, −2 to 1.4 mm]) was followed by LOR at the 6‐months‐FU (CCD: −3.5 mm [95% CI, −5.2 to −1.9 mm]; p < 0.001). cTW increased towards the inferior cortex, compared to the superior cortex and the intermediate level (p < 0.001, respectively). cTW at the inferior cortex was associated with more LOR (r = −0.449; p = 0.024) and DPT (r = 0.421; p = 0.036), dependent on a smaller FR (r = −0.430; p = 0.032). Conclusion: Patients undergoing arthroscopically‐assisted ACJ stabilization for chronic bidirectional ACJ instabilities showed comparable radiologic results after previous nonoperative versus surgical treatment. cTW increased towards the inferior cortex and was associated with recurrent vertical and horizontal instability, related to a smaller FR. More research into reduced cTW, for example, by a more filling device, should be performed. Level of Evidence: Level III, retrospective comparative study. [ABSTRACT FROM AUTHOR]

Background: The operative field in subclavian vessel surgery is limited by thoracic inlet and outlet structures. Although endovascular therapy for the subclavian artery could be an option, open repair management is occasionally required in cases of large aneurysms, infectious vasculopathy, and trauma. The transmanubrial osteomuscular sparing approach, commonly used in thoracic surgery area to resect superior sulcus tumors, is a simple and safe procedure providing an excellent view of the operative field. Herein, we present three cases that underwent open repair of the subclavian artery using the transmanubrial osteomuscular sparing approach, and we also highlight the utility of the technique along with the procedural details. Case presentation: Case 1: A 54-year-old man presented with a true aneurysm of the proximal portion of the right subclavian artery. The aneurysm measured 50 × 80 mm and compressed the right lung and trachea. We performed an aneurysm resection and a right subclavian artery reconstruction via the transmanubrial osteomuscular sparing approach under cardiopulmonary bypass support. Case 2: A 72-year-old man who presented with an abscess that formed around the left subclavian artery due to an unremoved guidewire during thoracic endovascular aortic repair for an aortic arch aneurysm in another hospital. After the antibiotics administration, debridement and axillary-axillary bypass were performed, and the guidewire was removed via a transmanubrial osteomuscular sparing approach with a use of cardiopulmonary bypass. Case 3: A 60-year-old man presented with misplacement of an indwelling dialysis catheter inserted for acute renal failure and hyperkalemia. The catheter was placed through the right neck, but had penetrated the right internal jugular vein and was misplaced from the right subclavian artery into the proximal aortic arch. Emergently, we removed the catheter using the transmanubrial osteomuscular sparing approach. Conclusions: The transmanubrial osteomuscular sparing approach to the subclavian artery provides an excellent view and a wide surgical field, even in different pathological situations. This is a simple, safe, and highly useful procedure and could be the standard approach for subclavian artery surgeries. [ABSTRACT FROM AUTHOR]

Background: Cortical thickness and porosity are two main determinants of cortical bone strength. Thus, mapping variations in these parameters across the full width of the distal end of the clavicle may be helpful for better understanding the basis of distal clavicle fractures and for selecting optimal surgical treatment. Methods: Distal ends of 11 clavicles (6 men, 5 women; age: 81.9 ± 15.1 years) were scanned by micro-computed tomography at 10-µm resolution. We first analyzed cortical thickness and porosity of each 500-μm-wide area across the superior surface of distal clavicle at the level of conoid tubercle in an antero-posterior direction. This level was chosen for detailed evaluation because previous studies have demonstrated its superior microarchitecture relative to the rest of the distal clavicle. Subsequently, we divided the full width of distal clavicle to three subregions (anterior, middle, and posterior) and analyzed cortical porosity, pore diameter, pore separation, and cortical thickness. Results: We found the largest number of low-thickness and high-porosity areas in the anterior subregion. Cortical porosity, pore diameter, pore separation, and cortical thickness varied significantly among the three subregions (p < 0.001 p = 0.016, p = 0.001, p < 0.001, respectively). Cortex of the anterior subregion was more porous than that of the middle subregion (p < 0.001) and more porous and thinner than that of the posterior subregion (p < 0.001, p = 0.030, respectively). Interaction of site and sex revealed higher porosity of the anterior subregion in women (p < 0.001). The anterior subregion had larger pores than the middle subregion (p = 0.019), whereas the middle subregion had greater pore separation compared with the anterior (p = 0.002) and posterior subregions (p = 0.006). In general, compared with men, women had thinner (p < 0.001) and more porous cortex (p = 0.03) with larger cortical pores (p < 0.001). Conclusions: Due to high cortical porosity and low thickness, the anterior conoid subregion exhibits poor bone microarchitecture, particularly in women, which may be considered in clinical practice. Levels of evidence: Level IV. [ABSTRACT FROM AUTHOR]

Introduction Sports-related outcomes and the role of recreational sports activities for shoulder function after intramedullary stabilization (IMS) of displaced midshaft clavicular fractures (DMCFs) in the general population are not well known. In this study, we aimed to determine the sport-related outcomes (return-to-sports [RTS] rate, type of sports, time until RTS, and intensity) and to explore the role of sports after IMS of DMCFs. Materials and Methods This single-center, retrospective, cohort study included patients who underwent IMS of DMCFs between 2009 and 2022 at a Level II trauma center in Germany, experienced no major complications, and had completed at least 1 year of follow-up. Propensity score matching was conducted to obtain a balanced sample of patients who did not engage (cases) and engaged (controls) in postoperative sports activities by adjusting for age and fracture complexity. Groups were compared to assess the impact of regular sports activities on subjective shoulder functioning at follow-up, as evaluated using the Disabilities of the Arm, Shoulder, and Hand and Oxford Shoulder Score (OSS) questionnaires, after controlling for the patient- (i.e., sex and smoking) and treatment- (i.e., surgery duration and physical therapy) factors. Results Among the 199 patients included, the RTS rate was 97.5%, and 160 patients practiced regular postoperative activity, mostly in the same sport and intensity. In the matched cohort (39 cases and 39 controls), practicing regular sports activities postoperatively was the only independent factor associated with a higher OSS in the multiple regression analysis (unstandardized regression coefficient = 2.40; Bias-corrected and accelerated 95% confidence interval [0.28, 4.69]). Conclusions The sport-related outcomes after IMS of DMCFs in our cohort were comparable to those achieved after plate osteosynthesis, and IMS reported in the literature. Recreational sports activities benefitted subjective shoulder function, thereby encouraging further research and potentially influencing management policies. Level of evidence Grade IV – a retrospective observational cohort study. [ABSTRACT FROM AUTHOR]

Purpose: To investigate the correlation between fetal clavicle length and gestational age in pregnant patients from 14 and 27 weeks of gestation. Methods: This was a retrospective cross-sectional study of patients from 14 and 27 weeks of gestation. Ultrasonographic measurements such as abdominal circumference (AC), femur length (FL), humerus length (HL), clavicle length (CL), head circumference (HC), biparietal diameter (BPD), estimated fetal weight (EFW), and transverse cerebellum diameter (TCD) were made and compared. Results: A total of 552 patients were evaluated in our clinic and CL was measured properly and successfully in all fetuses. Fetal AC, FL, HL, CL, BPD, HC, EFW and TCD measurements were significantly and strongly correlated with gestational week, and Pearson's correlation values were 0.964, 0.965, 0.959, 0.965, 0.951, 0.917, 0.925, and 0.954, respectively (p < 0.001). In the regression analysis equation, gestational week = 0.894 + CL × 0.961. Conclusion: There was a significant positive correlation between fetal CL (mm) and gestational week. We suggest that the 1 mm = 1 week rule can be used for patients with anomalies of the cerebellum and vermis, as well as for patients with unknown last menstrual period. [ABSTRACT FROM AUTHOR]

Introduction: Stellate ganglion block (SGB) provides diagnostic and therapeutic benefits in pain syndromes in the head, neck, and upper extremity, including complex regional pain syndrome Types I and II, Raynaud's disease, hyperhidrosis, arterial embolism in the region of the arm. Methods: We present a novel ultrasound‐guided supraclavicular stellate ganglion block. Considering the existing anatomical structures of the targeted area. Results and Conclusions: We hope that we can provide fewer complications and additional benefits with this new approach. [ABSTRACT FROM AUTHOR]

Lymphangiomas are congenital benign lesions commonly seen in pediatric age group with a rare occurrence in the region of head and neck, commonly presenting as asymptomatic masses. Cervical lymphangioma is a rare entity among adults, and giant sized lymphangiomas in this region have sparse mention in literature. This case report describes the rare presentation of a giant cervical lymphangioma and the challenges involved to treat such masses in the region of head and neck. We encountered a rare case of a 52 year old female who presented with a 10 × 5 cm swelling in the right posterior triangle of neck swelling since 6 months extending from skull base up till clavicle. Pathological and radiological entities confirmed the lesion as a "giant cervical lymphangioma". Head and neck lymphangiomas are congenital lesions of benign origin. Lymphangiomas have been classified as macrocystic if larger than 2 cm, and microcystic if less than 2 cm. Our description of a macrocystic 10 × 6 cm lesion is hence definitely one of the largest cervical lymphangiomas encountered till date. It's a problematic and arduous plan of treatment for such masses in head and neck with a high chance of recurrence if incompletely removed. [ABSTRACT FROM AUTHOR]

Aim: To analyze the association between clavicular tunnel positioning and postoperative reduction loss in patients with acute acromioclavicular (AC) joint dislocation treated with anatomic coracoclavicular (CC) fixation using double clavicular tunnels. Methods: A retrospective review of patients with AC joint dislocation, treated with anatomic CC fixation using double clavicular tunnels, was conducted. Patients with pre-operative, immediate post-operative, and final follow-up Zanca-view X-rays were included. On each X-ray, the obtained measures included: distance from lateral border of clavicle to trapezoid and conoid tunnels, distance between tunnels, clavicle length, and CC distance of affected and un-affected sides. Loss of reduction was calculated as CC distance difference between immediate and final post-operative X-rays. Association between reduction loss and tunnel positioning was analyzed. Results: Conoid, trapezoid and tunnel ratios were 24% ± 4, 15% ± 3, and 9% ± 2, respectively. Significant reduction loss was seen in 21(45.7%) patients. Significantly higher probabilities of reduction loss were associated with trapezoid tunnels placed medial to 24 mm (30.8% vs 65.0%, OR 4.2 (IC95%: 1.2–14.4), p: 0.024) or 15% of the clavicle length (32.1% vs 66.7%, OR 4.2 (IC 95%: 1.2–14.9), p: 0.025). Conclusions: Trapezoid tunnels placed medial to 24 mm or 15% medial to clavicle length could lead to higher probabilities of significant reduction loss. These findings support the importance of clavicular tunnels' proper placement for decreasing significant reduction loss. [ABSTRACT FROM AUTHOR]

Background: This study investigated the rate of acromial insufficiency fractures (AIF) in patients undergoing reverse shoulder arthroplasty (RSA) with concomitant distal clavicle excision (DCE). Methods: Patients who underwent primary RSA with DCE by a single surgeon from 2010 to 2021 were identified. Exclusion criteria included revision RSA, RSA for fracture, or cases utilizing an augmented baseplate or bone graft. AIF was defined as a radiographically proven acromion or scapular spine fracture. Pain without an identifiable fracture on imaging was defined as an acromial insufficiency reaction. Patient demographics, implant information, and radiograph measurements were compared between patients with and without acromial pathology. Results: One hundred and seventy-five patients were included. Mean age was 72.8 years, and 67% of patients were female. There were 3/174 acromial insufficiency fractures (1.7%). AIF occurred at a mean of 9.3 months after surgery. Twelve patients had insufficiency reactions (6.9%). Patients with acromial pathology were more likely to be female (p =.003) and have a diagnosis of osteoporosis (p =.047) and inflammatory arthritis (p =.049). There was no significant difference between groups in terms of other factors. Conclusion: The AIF rate in patients who underwent RSA with DCE was 1.7%. These findings suggest that DCE in the setting of RSA may have a protective role against AIF. [ABSTRACT FROM AUTHOR]

Purpose: Mandibular reconstruction remains a challenging procedure despite the availability of various flaps and grafts. The ultimate objective is to restore oral functioning and attain acceptable morphological outcomes while considering donor site morbidity. This study describes the vascular supply and harvesting technique of a pedicled clavicular bone. The proximity of the clavicle is conducive to a mandibular replacement and allows the use of vascularized bone with a single surgical field. Methods: The osteoperiosteal clavicular pedicled flap was harvested on the right side of ten fresh cadaver specimens. The cervical transverse artery was injected with colored latex in some cases and methylene blue in others. Results: The vascular periosteal supply of the clavicular flap was highlighted. The clavicular bone was linked to its pedicle which was composed of vascular and adipose-fascial tissues, without any overlying skin paddle. Its vasculature was supplied by a reverse flow from the ascending cervical artery. The pedicled clavicular bone readily reached the mandible in all dissections. Conclusion: The osteoperiosteal vasculature of the clavicular flap is based on the transverse cervical artery which receives a reverse blood supply from the ascending cervical artery. This vascular pattern is reliable because of the existence of the sub-occipital microvascular network named the "Bosniak node." This pedicled clavicular flap seems to be a robust perspective in both mandibular and facial bone reconstruction. We do not claim that it will replace the existing approaches, but it will expand the surgical panel of mandibular reconstruction. Its clinical realisation will judge its functionality. [ABSTRACT FROM AUTHOR]

The clavicle is a long bone that tends to be frequently fractured in the midshaft region. The plate and screw fixing method is mainly applied to address this issue. This study aims to construct a clavicle bone implant design with a consideration to achieve a high accuracy and high-quality surface between the plate and the clavicle surface. The computational tomography scanning (CT-scan) image series data were processed using a convolutional neural network (CNN) to classify the clavicle image. The CNN outcomes were gathered as three-dimensional (3D) volume data of clavicle bone. This 3D model was then proposed for the plate design. The CNN testing results of 97.4% for the image clavicle bones classification, whereas the prints of the 3D model from clavicle bone and its plate and screw design reveal compatibility between the bone surface and the plate surface. Overall, the CNN application to the series of CT images could ease the classification of clavicle bone images that would precisely construct the 3D model of clavicle bone and its suitable clavicle bone plate design. This study could contribute as a guideline for other bone plate areas that need to fit the patient's bone geometry. [ABSTRACT FROM AUTHOR]

Introduction: anatomical variations of the veins of the proximal part of the limbs are rare. Its knowledge is essential in the context of surgical procedures or central venous access. Material and methods: the surgical records of 100 patients operated on for brachial plexus injuries were analyzed. Results: we report of high position of the subclavian vein. The vein was located in a superior position with respect to the artery and brachial plexus, and in proximity to the posterior aspect of the middle third of the clavicle. Discusion: the variant described is infrequent and although its presence is mentioned in the literature, there are no clear data on its incidence. We find the description of these two cases of interest, highlighting their importance in brachial plexus repair surgery, in central venous accesses and in clavicular fracture repair surgery. Conclusions: the presence of a high subclavian vein is infrequent, but its existence should be known in the context of brachial plexus surgery or central venous puncture. [ABSTRACT FROM AUTHOR]

• XRF can detect Fe traces from blades in fresh human bone. • XRF can detect Fe traces from blades in human bone burned fresh. • XRF is not useful to detect blade traces in bone that has been previously inhumed. Heat-induced fractures can be hard to distinguish from sharp force traumas. This challenge can negatively impact medico-legal analysis. The present study aimed to experimentally assess if X-ray fluorescence (XRF) can be used to detect chemical traces transferred from the blade of a sharp instrument onto both fresh and dry human bones. This was performed by inducing sharp force traumas with five different instruments on 20 fresh and 20 dry human clavicles. All bone samples were probed before and after experimental burning (at 500 °C, 700 °C, 900 °C and 1100 °C). Our results show that XRF is potentially useful for detecting iron traces in fresh human bone, both unburned and burned. However, we were not able to clearly detect iron traces from the blades in bones that have been previously inhumed, since exogenous iron acquired during diagenesis masks the iron traces originating from the blade. [ABSTRACT FROM AUTHOR]

Osteitis of the sternocostoclavicular (SCC) region, referred to as sternocostoclavicular hyperostosis (SCCH), is the clinical expression of chronic non-bacterial osteitis (CNO) in adults with this rare chronic auto-inflammatory disorder of the axial skeleton. The diagnosis is based on distinctive computerized tomography (CT) features of sclerosis and hyperostosis of the SCC region, and local increases in osteoid formation visualized by high radiopharmacon uptake on skeletal scintigraphy but clear radiologic diagnostic criteria are lacking. In a cross-sectional study, CT scans and whole-body skeletal scintigraphy images obtained in 169 patients seen at the Center for Bone Quality of the Leiden University Medical Center between 2008 and 2018 with a suspected diagnosis of CNO of the SCC region were re-evaluated by 2 skeletal radiologists and 2 nuclear physicians. The diagnosis was confirmed in 118 (70%) predominantly female patients (n  = 103, 89.2%); median age at first symptoms 45 years (range 20-73). The diagnosis was excluded in the remaining 51 "non-CNO" patients. Increased radiopharmacon uptake at the SCC region was observed in 82% CNO patients, with the manubrium sterni having the highest predictive ability to discriminate on both imaging modalities. The prevalence of sclerosis of the clavicles, manubrium and first ribs was significantly higher in CNO patients (P  < 0.001). Hyperostosis was not observed in non-CNO patients. 46 CNO versus only 2 non-CNO patients had costoclavicular ligament calcification. Our findings identify CT scan features of sclerosis and hyperostosis of manubrium sterni, medial end of clavicles and first ribs, and calcification of costoclavicular ligaments, associated with increased tracer uptake on skeletal scintigraphy at the SCC region, specifically manubrium sterni, as well-defined imaging diagnostic criteria for adult CNO. Pitfalls encountered in the diagnosis of CNO are highlighted. These defined imaging diagnostic criteria for adult CNO should facilitate the diagnosis of this rare auto-inflammatory bone disease across the spectrum of its early to late stages. [ABSTRACT FROM AUTHOR]

Copyright of Journal of General Health Sciences (JGEHES) is the property of Journal of General Health Sciences (JGEHES) and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Perinatal clavicular fracture is the most common birth injury that may cause neonatal morbidities such as obstetric brachial palsy (OBP) ranging from 0.2 to 3.5%. We aimed to compare the relationship between perinatal clavicular fracture and induced vaginal delivery. All the live births and the neonatal outpatient clinic admissions between June 2016 and December 2022 have been investigated retrospectively. A total of 185 newborn infants with a mean gestational age of 38.3±1.6 weeks and a mean birth weight of 3,451±430.10 grams were enrolled. When compared to all in-born live births, the overall incidence of clavicular fracture was 0.78%. One hundred eighty-one (97.8%) infants were born vaginally and 4 (2.2%) were born by cesarean sections (C-sections). The incidence of clavicular fracture among in-born vaginally delivered infants was 1.26% (n=153) and among C-section deliveries was 0.04% (n=3). In vaginal deliveries, 54.7% (n=99) had prolonged labor, 71.8% (n=130) had received labor induction and 7.7% (n=14) had a history of instrumental intervention. A statistically significant relationship was found between clavicular fracture and prolonged labor, labor induction, increased birth weight, and low Apgar scores (p [Med-Science 2024; 13(3.000): 758-62]

Abstract The clavicle has various anatomic shapes unique to each individual. Additionally, with the increase in high-energy traumas such as sports injuries and traffic accidents, the patterns of fractures become complex and complicated. Thus, there is a need for a variety of shapes of locking compression plates (LCP) to accommodate different types of fractures and facilitate quicker rehabilitation. The aim of this study is to present different types of LCP that secure fracture fragments and distribute stress evenly, in comparison to typical anatomical LCPs, for reinforcing clavicle fractures. Three models were compared in this study: the typical shape, the center hole removed shape, and the double-curved wing shape. The DICOM (Digital Imaging and Communications in Medicine) file obtained from the computed tomography scan of the patient’s clavicle was used to extract the three-dimensional (3D) clavicle structure. Finite element analysis (FEA) simulation was employed to analyze the structural changes of the LCP under external forces. A reinforced jig was used to apply the same type of external force to each LCP, and an experiment was conducted to analyze the mechanical impact of the LCP’s structural characteristics. When comparing the stress values at the fracture zone point, resulting from the FEA simulation with applied bending forces, it was calculated that the stress dispersion effect was approximately ten times greater when transitioning from a typical LCP shape to a double-curved partial wing structure. Moreover, the ultimate stress increased 3.33 times, from 241.322 to 804.057 N, as the LCP design changed under cantilever bending conditions. This double-curved wing LCP design reduces stress concentration at the fracture site and minimizes stress in the fracture area when subjected to cantilever bending forces. Consequently, this newly designed LCP has the potential to decrease complications related to the plate and accelerate rehabilitation protocols.

Introduction: Chondromyxoid fibroma is a rare benign cartilaginous tumor that accounts for less than 1% of all bone tumors and involves long bones of the lower extremities more frequently. Therefore, the clavicle is a rare location of involvement for this entity. Case Presentation: The authors report a case of a diaphyseal chondromyxoid fibroma of the right clavicle in a 30-year-old male that was submitted to en bloc resection of the lesion and reconstruction with an autologous tricortical graft from the iliac crest. The post-operative period was uneventful, and the patient had regained excellent function of this right shoulder. At 2 years of follow-up, there was no evidence of a recurrence of the disease. Conclusion: Chondromyxoid fibroma of the clavicle should be included in the differential diagnosis of an indolent growing mass in this anatomic location.

BACKGROUND: There is no consensus on the optimal bone tunnel position in the lateral clavicle, which guides coracoclavicular ligament reconstruction. Postoperative complications such as enlargement of the lateral clavicle bone tunnel, bone osteolysis, clavicle fracture, and failure of internal fixation are likely to occur. Bone mass density plays an important role in the strength and stability of endophytic fixation. Regional differences in the bone mass density of the distal clavicle should not be overlooked in the repair and reconstruction of acromioclavicular dislocation. Currently, there are no quantitative clinical studies in humans regarding the bone mass density of the distal clavicle. OBJECTIVE: To measure the magnitude of bone mass density in different regions of the distal clavicle by quantitative CT to provide a reference for surgeons to repair and reconstruct the coracoclavicular ligament. METHODS: 101 patients undergoing quantitative CT checking in Fuyang People’s Hospital Affiliated to Anhui Medical University from October to December 2022 were enrolled, from which 1 616 samples of subdivisional bone mass density of the distal clavicle were measured. For each of the quantitative CT samples, firstly, the distal clavicle was divided medially to laterally into the following four regions: conical nodal region (region A), inter-nodal region (region B), oblique crest region (region C) and distal clavicular region (region D). Secondly, each region was divided into the first half and the second half to determine eight subdivisions, then setting semiautomatic region of interest (ROI) in each subdivision: (ROI A1, A2, B1, B2, C1, C2, D1, and D2). Thirdly, each quantitative CT scan was transferred to the quantitative CT pro analysis workstation, and cancellous bone mass density was measured in the distal clavicle ROI. Finally, the clavicular cortex was avoided when measuring. RESULTS AND CONCLUSION: (1) There was no statistically significant difference in bone mineral density on the different sides of the shoulder (P > 0.05). (2) The analysis of bone mineral density in eight sub-areas of the distal clavicle A1, A2, B1, B2, C1, C2, D1, and D2 showed statistically significant differences (P < 0.05). It could be considered that there were differences in bone mineral density in different areas of the distal clavicle. After pairwise comparison, there was no statistically significant difference in bone mineral density between A1 and A2, D1 and D2, A2 and B1 (P > 0.05), and there was a statistically significant difference in bone mineral density between the other sub-areas (P < 0.05). (3) The bone mineral density in the region A2 of the anatomical insertion of the conical ligament was significantly higher than that in the inter-nodular area (region B) (P < 0.05). The bone mineral density in the region A1 was higher than that in the region A2, but the difference was not statistically significant (P > 0.05). The bone mineral density in the region C1 of the anatomical insertion of the trapezium ligament was higher than that in regions C2, D1 and D2, and the bone mineral density in the inter-nodular area (region B) was significantly higher than that in regions C and D (P < 0.05). (4) These results have suggested that there are differences in bone mass density in different regions of the distal clavicle; regional differences in bone mass density in the distal clavicle during repair and reconstruction of acromioclavicular dislocation cannot be ignored. Consideration should be given not only to biomechanical factors but also to the placement of implants or bone tunnels in regions of higher bone mass density, which could improve the strength and stability of implant fixation and reduce the risk of complications such as bone tunnel enlargement, osteolysis, fracture and implant failure. [ABSTRACT FROM AUTHOR]

Metaphyseal dysplasia with maxillary hypoplasia with or without brachydactyly (MDMHB) is an ultra‐rare skeletal dysplasia caused by heterozygous intragenic RUNX2 duplications, comprising either exons 3 to 5 or exons 3 to 6 of RUNX2. In this study, we describe a 14‐year‐old Belgian boy with metaphyseal dysplasia with maxillary hypoplasia but without brachydactyly. Clinical and radiographic examination revealed mild facial dysmorphism, dental anomalies, enlarged clavicles, genua valga and metaphyseal flaring and thin cortices with an osteoporotic skeletal appearance. Exome sequencing led to the identification of a de novo heterozygous tandem duplication within RUNX2, encompassing exons 3 to 7. This duplication is larger than the ones previously reported in MDMHB cases since it extends into the C‐terminal activation domain of RUNX2. We review previously reported cases with MDMHB and highlight the resemblance of this disorder with Pyle disease, which may be explained by intersecting molecular pathways between RUNX2 and sFRP4. This study expands our knowledge on the genotypic and phenotypic characteristics of MDMHB and the role of RUNX2 in rare bone disorders. [ABSTRACT FROM AUTHOR]

Purpose: We present the functional and clinical results of a combined surgical technique that functionally restores chronic Acromioclavicular Joint Instability (AJI). The method combines a double-looped suture fixation augmented with a semitendinosus autograft. Methods: Between 2017 and 2021, 15 patients were treated using the surgical technique. All patients suffered an Acromioclavicular Joint Separation that remained untreated for at least 6 (6–16) weeks after the initial injury. Four Ethibond sutures were passed below the coracoid process and through a 4.5 drill hole in the clavicle. The sutures provided adequate horizontal and vertical reduction and stabilization of the clavicle. A semitendinosus autograft was passed below the coracoid process and looped around the clavicle. The remaining graft limbs were used to reconstruct the acromioclavicular capsule. Patients were radiologically evaluated with bilateral anteroposterior (AP), Zanca, and Alexander views. The clinical evaluation was based on the Acromioclavicular Joint Instability Score and the Constant-Murley Score. Results: The mean follow-up period was 31.2 months (17–61). The mean last ACJIS and CMS scores were 96 (90–100) and 97.67 (87–100), respectively. Reduction of the clavicle was radiologically confirmed in all cases throughout the follow-up period. AC arthritis was reported in 1 case without associated clinical symptoms. No significant complications were reported, and all patients returned to the pre-injury activity level. Conclusion: The presented functional reconstruction of the AC joint disruption in chronic cases is an effective and secure method with low complication rates and good clinical results. Level of Evidence III: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266. [ABSTRACT FROM AUTHOR]