Search

Durum wheat, a staple crop in Italy, faces substantial challenges due to increasing droughts and rising temperatures. This study examines the grain yield, agronomic traits, and quality of 41 durum wheat varieties over ten growing seasons in Southern Italy, utilizing a randomized complete block design. Notably, most varieties were not repeated between trials and 45% of the data was missing. The results indicate that the interaction between genotype and environment (GEI) significantly impacted all traits. High temperatures, elevated vapor pressure deficit (VPD), and water deficits severely affected yield and quality during warm years, while cooler years with favorable water availability promoted better growth and higher yields. Broad-sense heritability (H²) was generally low, suggesting that environmental factors played a major role in the observed traits. However, some traits, such as grain yield, ears per square meter, plant height, bleached wheat, thousand-grain weight, and hectoliter weight exhibited moderate to high heritability of the mean genotype (h²mg), indicating their potential for effective selection in breeding programs. Correlation analyses revealed strong connections between certain traits, such as protein content, and gluten index as well as between grain yield, and spike per square meter. Using the Multi-Trait Mean Performance Selection (MTMPS) index, the study identified six top-performing varieties. Among these, Antalis (G4) and Core (G18) consistently demonstrated strong adaptability and stability across different environments, particularly in hotter, drier conditions. Furio Camillo (G31) also exhibited valuable traits. This study highlights the challenges and complexities of breeding durum wheat for improved yield and quality in the face of climate change. [ABSTRACT FROM AUTHOR]

This study examines the effects of biodegradable mulches on melon production and quality in a Mediterranean environment, specifically focusing on Mater-Bi and Ecovio in comparison to conventional (low-density polyethylene) LDPE mulch. Biodegradable mulches influenced soil temperature, with Mater-Bi maintaining higher maximum soil temperatures conducive to crop growth, while Ecovio exhibited lower maximum temperatures beneficial in hot summer months. Results revealed a significant increase in melon yield with biodegradable mulches, with both Ecovio and Mater-Bi demonstrating higher yields at approximately 20.41 t ha−1, showing an improvement of 23.4% compared to LDPE. Although mulching did not impact the number, weight, or distal diameter of marketable fruits, it affected the apical diameter, with Ecovio-treated plants displaying an 8.4% larger apical diameter compared to the average of all treatments. Furthermore, mulching influenced fruit quality parameters such as consistency, pulp thickness, sugar content, and anti-oxidant activity, with Mater-Bi exhibiting the best performance. Since both Mater-Bi and Ecovio possess strengths and weaknesses, selecting the optimal mulch depends on the farmer's specific objectives and local growing conditions. Overall, the study suggests that biodegradable mulches, particularly Ecovio, offer a sustainable alternative to traditional plastic films, contributing to environmental preservation and enhancing melon yield and quality in Mediterranean agricultural settings. [ABSTRACT FROM AUTHOR]

Mulching is one of the most recommended practices in agriculture due to its positive effects on the plant/soil system. Very few experiments have been conducted to date to investigate the effect of mulching, with both organic and inorganic materials, on tobacco. The main aim of this study was to test the synergic effect of a soil-biodegradable (according to standard EN17033) mulching film (the commercial Mater-Bi®, Novamont SpA, Novara, Italy) and drip irrigation (M-D) compared with that of bare soil and sprinkler/drip irrigation (first/second part of the growing season; BS-SD) on a tobacco crop (Nicotiana tabacum L., flue-cured Virginia) grown in the Tiber Valley (the tobacco cultivation district of Central Italy). BS-SD represents the standard practice applied by tobacco growers in the study area. The plants grown under the M-D management system grew more and developed faster than the plants grown under BS-SD conditions. Under the M-D system, yields increased in comparison with the BS-SD conditions (+29%, on average). The gross revenue obtained via the M-D-cured products also increased (+63%, on average) thanks to higher prices assigned by expert evaluators on the basis of the extrinsic quality traits (color, structure and texture, degree of ripeness, elasticity, lamina integrity, handling defects, and vein incidence). The economic value of the cured products increased with the leaf crowns; it was the lowest in the basal (B) leaves and the highest in the middle-upper (MU) leaves. The intrinsic quality traits of the cured leaves (total N and nitrate contents, alkaloids, and reducing sugars) also confirmed that the best quality was found in the M-D-cured products, as determined by expert evaluation. Interestingly, the reducing sugar (RS) contents of tobacco obtained using the M-D management system were 2.5-, 1.1-, and 0.9-fold greater than those under the BS-SD conditions (B, M, and MU products, respectively). An additional commercial value of the cured products was thus obtained with the M-D crop management system due to RS, an intrinsic quality trait considered by manufacturing industries. [ABSTRACT FROM AUTHOR]

Recent agricultural research has prioritized the development of environmentally friendly management strategies to ensure food security, among which the application of biostimulants such as brown algae extracts, arbuscular mycorrhizal fungi (AMF), and their combination are included. The experimental protocol was based on the factorial combination of two planting times (4 May and 1 June) and seven biostimulant treatments (three brown algae species, Cystoseria tamariscifolia—C.t.; Fucus vesiculosus—F.v.; Padina pavonica—P.p.; arbuscular mycorrhizal fungi—AMF; C.t. + AMF; F.v. + AMF; P.p. + AMF) plus an untreated control. The earlier transplant resulted in a higher yield, due to the higher number of fruits per plant, and a higher plant fresh and dry biomass. The treatments with P.p. and F.v. extracts and the combination P.p. + AMF led to the highest yields (56.7 t ha−1), mainly due to the highest fruit number per plant. The earlier planting time led to higher values of dry residue, soluble solids, firmness, and colour component 'a'. The highest values of fruit dry residue were recorded under the F.v. and P.p. extracts, and the combinations F.v. + AMF and P.p. + AMF, the highest soluble solid content with P.p. treatment, and firmness under P.p. + AMF. The highest levels of 'L' and 'a' fruit colour components were obtained under the P.p. extract treatment, of 'b' upon the application of P.p. and F.v. extract, and AMF + P.p. and AMF + F.v. The later planting time led to significantly higher values of the antioxidant parameters, as did the application of the P.p. extract and P.p. + AMF. CAT activity was more intense corresponding to the later tomato crop cycle, P.p. extract, and AMF + P.p. Overall, our study highlights the potential of biostimulants, particularly brown algae extracts and their combination with AMF, to improve tomato yield, antioxidant properties, and biochemical activities. [ABSTRACT FROM AUTHOR]

Organic amendment and green manuring are two agricultural practices highly recommended to improve sustainability in agriculture since they show numerous beneficial effects on both soils and crops. The main aim of the present study was to evaluate the effect of both, specifically organic fraction municipal solid waste (OFMSW) compost and horse bean (Vicia faba L., cv minor) green manure, combined separately or together with a mineral fertilization using synthetic products and in comparison with a mineral fertilization alone (control), on a top-quality tobacco crop (dark fire-cured Kentucky) grown in the cultivation district of Central Italy (High Tiber Valley, Tuscany region) in 2020 and 2021. The following parameters were measured: (i) leaf emergence rate (LER, leaves day−1); (ii) crop growth rate (CGR, kg dry biomass ha−1 day−1); (iii) root weight density (RWD, mg cm−3); (iv) yield of cured product (CLY, Mg ha−1). Analytical determinations were carried out on soil, sampled at the 0–0.3 m depth (organic matter, %; total N, %; NO3-N, mg kg−1; C/N; P and K, mg kg−1), and on plant biomass (total N, %; NO3-N, kg ha−1). Soil water retention measures were also made. Water productivity (WP, kg cured product m−3 gross crop evapotranspiration, ETc gross), irrigation water use efficiency (IWUE, kg cured product m−3 seasonal irrigation volume) and N agronomic efficiency (NAE, kg cured product kg−1 mineral N applied by synthetic fertilizers) were calculated. Both the applications of OFMSW compost and horse bean green manure increased soil content of organic matter and main nutrients (N, P and K), as well as C/N, when compared with control conditions. There was an increase in soil water content in C conditions over the entire soil matric potential interval (0.04 to 1.2 MPa) with a maximum value at 1.2 MPa in both years. Both practices appeared promising for tobacco cultivation and could help to better address the nitrogen needs of the crop during the season and reduce potential water pollution due to nitrates. Considering the amount of synthetic nitrogen fertilizer saved by using both organic soil amendment and green manuring, there should be fewer potential carbon emissions due to the production, transportation and field application of synthetic nitrogen fertilizers. [ABSTRACT FROM AUTHOR]

Research has been increasingly focusing on the preservation of the biodiversity of vegetable crops under sustainable farming management. An experiment was carried out in southern Italy on Brassica oleracea L. var. botrytis, landrace Gigante di Napoli, to assess the effects of two transplanting times (9 September and 7 October), in factorial combination with five nitrogen–potassium ratios (0.6; 0.8; 1.0; 1.2; and 1.4) on plant growth, yield, and quality of cauliflower heads. A split-plot design was used for the treatment distribution in the field, with three replications. The earlier transplant and the 1.2 N:K ratio led to the highest yield, mean weight, and firmness of cauliflower heads which were not significantly affected by both transplanting time and N:K ratio in terms of colour components. The 1.2 N:K ratio led to the highest head diameter with the earlier transplant, whereas the 1.0 ratio was the most effective on this parameter in the later crop cycle. The highest nitrate, nitrogen, and potassium concentrations in the heads were recorded with the earlier transplanting time. Antioxidant activity, ascorbic acid, and polyphenol content increased with the rise of the N:K ratio. The element use efficiency was constantly negative with the N:K increase for nitrogen and was augmented until the 1.2 ratio for potassium. The results of our investigation showed that the optimal combination between transplanting time and N:K ratio is a key aspect to improve head yield and quality of the cauliflower landrace Gigante di Napoli, under the perspective of biodiversity safeguarding and valorisation. [ABSTRACT FROM AUTHOR]

Low-density polyethylene (LDPE) mulching films have an important function in crop cultivation; at the end of their life, however, their removal and disposal become both an economic and environmental problem. One possible alternative to low-density polyethylene (LDPE) mulch is provided by certified soil-biodegradable mulch films, such as those produced by Novamont and commercially available under the trade name MaterBi®. MaterBi is a biodegradable thermoplastic material made with starch and a biodegradable copolyester based on proprietary technology. In this study, we compared two biodegradable MaterBi®-based films (commercial and experimental films) with bare soil and a low-density polyethylene to evaluate their effect on yield and on a number of qualitative characteristics (organoleptic and nutraceutical composition) of eggplant fruits (cv Mirabelle F1) grown in two different regions in Southern Italy (Sicily and Campania). In our study, the use of biodegradable MaterBi® films improved not only yield and production parameters, such as the number and average weight of fruits, but also lipophilic and hydrophilic antioxidant activity and phenolic and ascorbic acid content. For many parameters, responses differed according to the cultivation environment and, in particular, the site's pedoclimatic conditions. Our results suggest that biodegradable MaterBi®-based mulching films are a potentially valid alternative to traditional LDPEs, providing the production and quality benefits reported above and promoting environmental sustainability, thanks to their positive biodegradable properties. [ABSTRACT FROM AUTHOR]

Perennial wall-rocket (Diplotaxis tenuifolia) belongs to the Brassicaceae family. It has spread worldwide due to its functional properties, and has long been known in folk medicine of native populations in areas of the Mediterranean and western Asia. In the past, Diplotaxis tenuifolia was a herbaceous plant harvested and consumed as a spontaneous herb, but today it is an important leafy vegetable in ready-to-use salads, with an increasing impact in the national and international vegetable retail markets. The leaves of perennial wall-rocket have valuable nutritional properties because of the amounts of antioxidant compounds they contain, in particular glucosinolates, vitamin C, as well as flavonoids, which make their consumption beneficial for preventing some types of cancer and cardiovascular disease. In the current review, major pre-harvest factors of Diplotaxis tenuifolia production, such as cropping systems, fertilization, as well as water management and irrigation, are addressed with respect to crop productivity and leaf quality.

Among the most valuable horticultural produce, tomato is cultivated for both fresh consumption and processing purposes. Therefore, good agricultural practices secure better production and income for farmers such as the adoption of biostimulant application throughout the growing cycle. The presence of different biostimulants in the market urge its testing to depict wider aftermath on a variety of crops. A field experiment was conducted on processing tomato where a plant growth regulator (PGR; Atonik) composed of phenolic compounds, was applied following a different schedule of field applications to improve growth and fruit setting and quality. Two interventions of this PGR increased tomato marketable yield by 32.1% including fruit number per square meters (+30.8%), while four applications increased few qualitative parameters such as total soluble solids (+15.4%), firmness (+15.3%), total flavonoids (+142.6%) and total polyphenols (+33.5%). However, the added net return was higher when only two applications were done. This finding underlines the utility of testing biostimulants on different crops and depicts the best agricultural practices in term of application number in order to maintain the best net return. However, qualitative aspects should not be underestimated when pricing horticultural commodities, since quality is equally an important target to be reached in food industry. [ABSTRACT FROM AUTHOR]

Mulching is a common practice for improving crop yield and obtaining an out-of-season production, but when made using plastic materials it can bring environmental problems due to the management and the disposal of films at the end of the cropping seasons. To increase the sustainability of this practice, recently, mulching films made with biodegradable organic materials have become more widely used. Our aim was to evaluate the effect of a biodegradable mulching film on yield and qualitative traits of the San Marzano tomato fruits over two years (2014 and 2015). Two different types of mulching were tested: (i) black biodegradable film (MB12) and (ii) black low-density polyethylene (LDPE) were compared to bare soil (BS). Both mulching films elicited a 25% increase in yield, mainly due to the significantly higher number of fruits per square meter, compared to BS. Both mulching films also elicited a 9.9% increase in total soluble solids and a 57% increase in carotenoid content, while firmness showed the highest value in BS fruits. MB12 determined the highest value of the Hunter color ratio a/b of tomato fruits, followed by LDPE, while the lowest value was recorded in BS fruits. Both mulching films elicited an increase of 9.6%, 26.0%, and 11.7% for flavonoids, polyphenols, and AsA, respectively. In 2014, the MB12 degradation started at 71 days after transplant (DAT); in 2015, at 104 DAT. Therefore, replacing polyethylene with biodegradable film would seem to be an agronomically efficient and environmentally sustainable practice. [ABSTRACT FROM AUTHOR]

Tomato is a great source of bioactive compounds, is important for human health, and is cultivated worldwide. However, the high inputs required for its cultivation must be sustainably managed in order to limit yield losses, thus obtaining high-quality and environmentally friendly production. In this perspective, we compared four biostimulant treatments, i.e., Ascophyllum nodosum extract—Bio; microbial biostimulant containing the micro-organism Trichoderma afroharzianum—Mic; a combination of both—M-B; not treated—Control) and three mulch treatments (biodegradable film Ecovio—ECO; biodegradable film MaterBi®—NOV; bare soil—BS) and evaluated their effects on yield and quality traits in processing tomato. Both biodegradable films elicited a 27.0% yield increase compared to plants grown on bare soil, and biostimulants determined a 23.7% increase over the Control, with the best performance recorded for M-B (+24.8%). Biodegradable MaterBi® film (NOV) was associated with higher total soluble solids (TSS) and firmness values (average of 4.9 °Brix and 1.30 kg cm−2, respectively), even if a significant effect of biostimulants was observed only for the second element. Carotenoid content was higher in non-treated plants grown on bare soil as well as hydrophilic antioxidant activity (AA), but in this case, no differences between biostimulant treatments were recorded. The lipophilic AA in NOV-treated plants was about six and four times higher than observed in BS and ECO treatments, respectively; NOV also caused a 38.7% increase in ascorbic acid content over the Control but was not different from ECO. All biostimulant treatments elicited a 30% increase in phenol content compared to Control plants. Our findings highlight that microbial biostimulants based on A. nodosum extract and T. afroharzianum (both applied singularly and combined) can be considered a sustainable tool for increasing yield and improve some quality traits of processing tomato; in addition, we also confirmed the capability of biodegradable mulches, in particular, MaterBi®, to enhance the agronomic performance of tomato. [ABSTRACT FROM AUTHOR]