Search

This work introduces Semantically Masked VQ-GAN (SQ-GAN), a novel approach integrating generative models to optimize image compression for semantic/task-oriented communications. SQ-GAN employs off-the-shelf semantic semantic segmentation and a new specifically developed semantic-conditioned adaptive mask module (SAMM) to selectively encode semantically significant features of the images. SQ-GAN outperforms state-of-the-art image compression schemes such as JPEG2000 and BPG across multiple metrics, including perceptual quality and semantic segmentation accuracy on the post-decoding reconstructed image, at extreme low compression rates expressed in bits per pixel.

Space-fed large antenna arrays offer superior efficiency, simplicity, and reductions in size, weight, power, and cost (SWaP-C) compared to constrained-feed systems. Historically, horn antennas have been used for space feeding, but they suffer from limitations such as bulky designs, low aperture efficiency ($\approx 50\%$), and restricted degrees of freedom at the continuous aperture. In contrast, planar patch arrays achieve significantly higher aperture efficiency ($>90\%$) due to their more uniform aperture distribution, reduced weight, and increased degrees of freedom from the discretized aperture. Building on these advantages, we proposed an array-fed Reflective Intelligent Surface (RIS) system, where an active multi-antenna feeder (AMAF) optimizes power transfer by aligning with the principal eigenmode of the AMAF-RIS propagation matrix $\mathbf{T}$. While our previous studies relied on the Friis transmission formula for system modeling, we now validate this approach through full-wave simulations in CST Microwave Studio. By comparing the Friis-based matrix, $\mathbf{T}_{\rm Friis}$, with the full-wave solution, $\mathbf{T}_{\rm full. wave}$, we validate the relevance of the Friis-based modeling for top-level system design. Our findings confirm the feasibility of the proposed AMAF-RIS architecture for next-generation communication systems., Comment: Accepted for The 16th German Microwave Conference (GeMiC), Dresden

Flat-top beam designs are essential for uniform power distribution over a wide angular sector for applications such as 5G/6G networks, satellite communications, radar systems, etc. Low sidelobe levels with steep transitions allow negligible cross sector illumination. Active array designs requiring amplitude taper suffer from poor power amplifier utilization. Phase only designs, e.g., Zadoff-Chu or generalized step chirp polyphase sequence methods, often require large active antenna arrays which in turns increases the hardware complexity and reduces the energy efficiency. In our recently proposed novel array-fed reflective intelligent surface (RIS) architecture, the small ($2 \times 2$) active array has uniform (principal eigenmode) amplitude weighting. We now present a pragmatic flat-top pattern design method for practical array (RIS) sizes, which outperforms current state-of-the-art in terms of design superiority, energy efficiency, and deployment feasibility. This novel design holds promise for advancing sustainable wireless technologies in next-generation communication systems while mitigating the environmental impact of high-energy antenna arrays.

Next-generation wireless networks are conceived to provide reliable and high-data-rate communication services for diverse scenarios, such as vehicle-to-vehicle, unmanned aerial vehicles, and satellite networks. The severe Doppler spreads in the underlying time-varying channels induce destructive inter-carrier interference (ICI) in the extensively adopted orthogonal frequency division multiplexing (OFDM) waveform, leading to severe performance degradation. This calls for a new air interface design that can accommodate the severe delay-Doppler spreads in highly dynamic channels while possessing sufficient flexibility to cater to various applications. This article provides a comprehensive overview of a promising chirp-based waveform named affine frequency division multiplexing (AFDM). It is featured with two tunable parameters and achieves optimal diversity order in doubly dispersive channels (DDC). We study the fundamental principle of AFDM, illustrating its intrinsic suitability for DDC. Based on that, several potential applications of AFDM are explored. Furthermore, the major challenges and the corresponding solutions of AFDM are presented, followed by several future research directions. Finally, we draw some instructive conclusions about AFDM, hoping to provide useful inspiration for its development., Comment: Magazine paper submitted to IEEE

This paper considers a joint scattering environment sensing and data recovery problem in an uplink integrated sensing and communication (ISAC) system. To facilitate joint scatterers localization and multi-user (MU) channel estimation, we introduce a three-dimensional (3D) location-domain sparse channel model to capture the joint sparsity of the MU channel (i.e., different user channels share partially overlapped scatterers). Then the joint problem is formulated as a bilinear structured sparse recovery problem with a dynamic position grid and imperfect parameters (such as time offset and user position errors). We propose an expectation maximization based turbo bilinear subspace variational Bayesian inference (EM-Turbo-BiSVBI) algorithm to solve the problem effectively, where the E-step performs Bayesian estimation of the the location-domain sparse MU channel by exploiting the joint sparsity, and the M-step refines the dynamic position grid and learns the imperfect factors via gradient update. Two methods are introduced to greatly reduce the complexity with almost no sacrifice on the performance and convergence speed: 1) a subspace constrained bilinear variational Bayesian inference (VBI) method is proposed to avoid any high-dimensional matrix inverse; 2) the multiple signal classification (MUSIC) and subspace constrained VBI methods are combined to obtain a coarse estimation result to reduce the search range. Simulations verify the advantages of the proposed scheme over baseline schemes., Comment: 15 pages, 12 figures

Coded caching leverages the differences in user cache memories to achieve gains that scale with the total cache size, alleviating network congestion due to high-quality content requests. Additionally, distributing transmitters over a wide area can mitigate the adverse effects of path loss. In this work, we consider a partially connected network where the channel between distributed transmitters (helpers) and users is modeled as a distributed MIMO Gaussian broadcast channel. We propose a novel delivery scheme consisting of two phases: partitioning and transmission. In the partitioning phase, users with identical cache profiles are partitioned into the minimum number of sets, such that users within each set can successfully decode their desired message from a joint transmission enabled by MIMO precoding. To optimally partition the users, we employ the branch and bound method. In the transmission phase, each partition is treated as a single entity, and codewords are multicast to partitions with distinct cache profiles. The proposed delivery scheme is applicable to any partially connected network, and while the partitioning is optimal, the overall delivery scheme, including transmission, is heuristic. Interestingly, simulation results show that its performance closely approximates that of the fully connected optimal solution.

In this paper, we propose a novel approach that harnesses the standard interference function, specifically tailored to address the unique challenges of non-convex optimization in wireless networks. We begin by establishing theoretical guarantees for our method under the assumption that the interference function exhibits log-concavity. Building on this foundation, we develop a Primal-Dual Algorithm (PDA) to approximate the solution to the Weighted Sum Rate (WSR) maximization problem. To further enhance computational efficiency, we leverage the deep unfolding technique, significantly reducing the complexity of the proposed algorithm. Through numerical experiments, we demonstrate the competitiveness of our method compared to the state-of-the-art fractional programming benchmark, commonly referred to as FPLinQ.

Coded caching is a promising technique to effectively reduce peak traffic by using local caches and the multicast gains generated by these local caches. We prefer to design a coded caching scheme with the subpacketization $F$ and transmission load $R$ as small as possible since these are the key metrics for evaluating the implementation complexity and transmission efficiency of the scheme, respectively. However, most of the existing coded caching schemes have large subpacketizations which grow exponentially with the number of users $K$, and there are a few schemes with linear subpacketizations which have large transmission loads. In this paper, we focus on studying the linear subpacketization, i.e., $K=F$, coded caching scheme with low transmission load. Specifically, we first introduce a new combinatorial structure called non-half-sum disjoint packing (NHSDP) which can be used to generate a coded caching scheme with $K=F$. Then a class of new schemes is obtained by constructing NHSDP. Theoretical and numerical comparisons show that (i) compared to the existing schemes with linear subpacketization (to the number of users), the proposed scheme achieves a lower load; (ii) compared to some existing schemes with polynomial subpacketization, the proposed scheme can also achieve a lower load in some cases; (iii) compared to some existing schemes with exponential subpacketization, the proposed scheme has loads close to those of these schemes in some cases. Moreover, the new concept of NHSDP is closely related to the classical combinatorial structures such as cyclic difference packing (CDP), non-three-term arithmetic progressions (NTAP), and perfect hash family (PHF). These connections indicate that NHSDP is an important combinatorial structure in the field of combinatorial design.

Caching is an efficient technique to reduce peak traffic by storing popular content in local caches. Placement delivery array (PDA) proposed by Yan et al. is a combinatorial structure to design coded caching schemes with uncoded placement and one-shot linear delivery. By taking the $m$-fold Cartesian product of a small base PDA, Wang et al. constructed a big PDA while maintaining the memory ratio and transmission load unchanged, which achieves linear growth in both the number of users and coded caching gain. In order to achieve exponential growth in both the number of users and coded caching gain, in this paper we propose a PDA construction by taking the union operation of the cache configurations from the $m$-fold Cartesian product of a base PDA. The resulting PDA leads to a coded caching scheme with subpacketization increasing sub-exponentially with the number of users while keeping the load constant for fixed memory ratio. By applying the proposed construction to existing base PDAs, three new coded caching schemes are obtained, which cover some existing schemes as special cases and can achieve lower load with simultaneously lower subpacketization for some memory ratios., Comment: 35 pages, 4 figures

Integrated Sensing and Communications (ISAC) is expected to play a pivotal role in future 6G networks. To maximize time-frequency resource utilization, 6G ISAC systems must exploit data payload signals, that are inherently random, for both communication and sensing tasks. This paper provides a comprehensive analysis of the sensing performance of such communication-centric ISAC signals, with a focus on modulation and pulse shaping design to reshape the statistical properties of their auto-correlation functions (ACFs), thereby improving the target ranging performance. We derive a closed-form expression for the expectation of the squared ACF of random ISAC signals, considering arbitrary modulation bases and constellation mappings within the Nyquist pulse shaping framework. The structure is metaphorically described as an ``iceberg hidden in the sea", where the ``iceberg'' represents the squared mean of the ACF of random ISAC signals, that is determined by the pulse shaping filter, and the ``sea level'' characterizes the corresponding variance, caused by the randomness of the data payload. Our analysis shows that, for QAM/PSK constellations with Nyquist pulse shaping, Orthogonal Frequency Division Multiplexing (OFDM) achieves the lowest ranging sidelobe level across all lags. Building on these insights, we propose a novel Nyquist pulse shaping design to enhance the sensing performance of random ISAC signals. Numerical results validate our theoretical findings, showing that the proposed pulse shaping significantly reduces ranging sidelobes compared to conventional root-raised cosine (RRC) pulse shaping, thereby improving the ranging performance., Comment: 13 pages, 7 figures, submitted to IEEE for possible publication

This work considers a spatial non-stationary channel tracking problem in broadband extremely large-scale multiple-input-multiple-output (XL-MIMO) systems. In the case of spatial non-stationary, each scatterer has a certain visibility region (VR) over antennas and power change may occur among visible antennas. Concentrating on the temporal correlation of XL-MIMO channels, we design a three-layer Markov prior model and hierarchical two-dimensional (2D) Markov model to exploit the dynamic sparsity of sparse channel vectors and VRs, respectively. Then, we formulate the channel tracking problem as a bilinear measurement process, and a novel dynamic alternating maximum a posteriori (DA-MAP) framework is developed to solve the problem. The DA-MAP contains four basic modules: channel estimation module, VR detection module, grid update module, and temporal correlated module. Specifically, the first module is an inverse-free variational Bayesian inference (IF-VBI) estimator that avoids computational intensive matrix inverse each iteration; the second module is a turbo compressive sensing (Turbo-CS) algorithm that only needs small-scale matrix operations in a parallel fashion; the third module refines the polar-delay domain grid; and the fourth module can process the temporal prior information to ensure high-efficiency channel tracking. Simulations show that the proposed method can achieve a significant channel tracking performance while achieving low computational overhead., Comment: 13 pages, 11 figures,Submitted to IEEE TSP

Devices in a device-to-device (D2D) network operating in sub-THz frequencies require knowledge of the spatial channel that connects them to their peers. Acquiring such high dimensional channel state information entails large overhead, which drastically increases with the number of network devices. In this paper, we propose an accelerated method to achieve network-wide beam alignment in an efficient way. To this aim, we consider compressed sensing estimation enabled by a novel design of pilot sequences. Our designed pilots have constant envelope to alleviate hardware requirements at the transmitters, while they exhibit a "comb-like"' spectrum that flexibly allocates energy only on certain frequencies. This design enables multiple devices to transmit thier pilots concurrently while remaining orthogonal in frequency, achieving simultaneous alignment of multiple devices. Furthermore, we present a sequential partitioning strategy into transmitters and receivers that results in logarithmic scaling of the overhead with the number of devices, as opposed to the conventional linear scaling. Finally, we show via accurate modeling of the indoor propagation environment and ray tracing simulations that the resulting sub-THz channels after successful beamforming are approximately frequency flat, therefore suitable for efficient single carrier transmission without equalization. We compare our results against an "802.11ad inspired" baseline and show that our method is capable to greatly reduce the number of pilots required to achieve network-wide alignment., Comment: 14 pages, 13 figures. Submitted to IEEE Transactions on Wireless Comunications

Integrated sensing and communication (ISAC) systems provide significant enhancements in performance and resource efficiency compared to individual sensing and communication systems, primarily attributed to the collaborative use of wireless resources, radio waveforms, and hardware platforms. The performance limits of a system are crucial for guiding its design; however, the performance limits of integrated sensing and communication (ISAC) systems remain an open question. This paper focuses on the bistatic ISAC systems with dispersed multi-receivers and one sensor. Compared to the monostatic ISAC systems, the main challenge is that that the communication messages are unknown to the sensor and thus become its interference, while the channel information between the transmitters and the sensor is unknown to the transmitters. In order to mitigate the interference at the sensor while maximizing the communication degree of freedom, we introduce the blind interference alignment strategy for various bistatic ISAC settings, including interference channels, MU-MISO channels, and MU-MIMO channels. Under each of such system, the achieved ISAC tradeoff points by the proposed schemes in terms of communication and sensing degrees of freedom are characterized, which outperforms the time-sharing between the two extreme sensing-optimal and communication-optimal points.Simulation results also demonstrate that the proposed schemes significantly improve on the ISAC performance compared to treating interference as noise at the sensor.

Reconfigurable intelligent surface (RIS) has been treated as a core technique in improving wireless propagation environments for the next generation wireless communication systems. This paper proposes a new coded caching problem, referred to as Reconfigurable Intelligent Surface (RIS)-assisted multiple-antenna coded caching, which is composed of a server with multiple antennas and some single-antenna cache-aided users. Different from the existing multi-antenna coded caching problems, we introduce a passive RIS (with limited number of units) into the systems to further increase the multicast gain (i.e., degrees of freedom (DoF)) in the transmission, which is done by using RIS-assisted interference nulling. That is, by using RIS, we can `erase' any path between one transmission antenna and one receive antenna. We first propose a new RIS-assisted interference nulling approach to search for the phase-shift coefficients of RIS for the sake of interference nulling, which converges faster than the state-of-the-art algorithm. After erasing some paths in each time slot, the delivery can be divided into several non-overlapping groups including transmission antennas and users, where in each group the transmission antennas serve the contained users without suffering interference from the transmissions by other groups. The division of groups for the sake of maximizing the DoF could be formulated into a combinatorial optimization problem. We propose a grouping algorithm which can find the optimal solution with low complexity, and the corresponding coded caching scheme achieving this DoF., Comment: The short version of this paper was presented in 2024 IEEE Information Theory Workshop, Nov. 24-28, 2024

Evaluating datasets in data marketplaces, where the buyer aim to purchase valuable data, is a critical challenge. In this paper, we introduce an innovative task-agnostic data valuation method called PriArTa which is an approach for computing the distance between the distribution of the buyer's existing dataset and the seller's dataset, allowing the buyer to determine how effectively the new data can enhance its dataset. PriArTa is communication-efficient, enabling the buyer to evaluate datasets without needing access to the entire dataset from each seller. Instead, the buyer requests that sellers perform specific preprocessing on their data and then send back the results. Using this information and a scoring metric, the buyer can evaluate the dataset. The preprocessing is designed to allow the buyer to compute the score while preserving the privacy of each seller's dataset, mitigating the risk of information leakage before the purchase. A key feature of PriArTa is its robustness to common data transformations, ensuring consistent value assessment and reducing the risk of purchasing redundant data. The effectiveness of PriArTa is demonstrated through experiments on real-world image datasets, showing its ability to perform privacy-preserving, augmentation-robust data valuation in data marketplaces.

In this work, we consider the target detection problem in a multistatic integrated sensing and communication (ISAC) scenario characterized by the cell-free MIMO communication network deployment, where multiple radio units (RUs) in the network cooperate with each other for the sensing task. By exploiting the angle resolution from multiple arrays deployed in the network and the delay resolution from the communication signals, i.e., orthogonal frequency division multiplexing (OFDM) signals, we formulate a cooperative sensing problem with coherent data fusion of multiple RUs' observations and propose a sparse Bayesian learning (SBL)-based method, where the global coordinates of target locations are directly detected. Intensive numerical results indicate promising target detection performance of the proposed SBL-based method. Additionally, a theoretical analysis of the considered cooperative multistatic sensing task is provided using the pairwise error probability (PEP) analysis, which can be used to provide design insights, e.g., illumination and beam patterns, for the considered problem., Comment: submitted to WCNC 2025

Optimizing network utility in device-to-device networks is typically formulated as a non-convex optimization problem. This paper addresses the scenario where the optimization variables are from a bounded but continuous set, allowing each device to perform power control. The power at each link is optimized to maximize a desired network utility. Specifically, we consider the weighted-sum-rate. The state of the art benchmark for this problem is fractional programming with quadratic transform, known as FPLinQ. We propose a scalarization approach to transform the weighted-sum-rate, developing an iterative algorithm that depends on step sizes, a reference, and a direction vector. By employing the deep unfolding approach, we optimize these parameters by presenting the iterative algorithm as a finite sequence of steps, enabling it to be trained as a deep neural network. Numerical experiments demonstrate that the unfolded algorithm performs comparably to the benchmark in most cases while exhibiting lower complexity. Furthermore, the unfolded algorithm shows strong generalizability in terms of varying the number of users, the signal-to-noise ratio and arbitrary weights. The weighted-sum-rate maximizer can be integrated into a low-complexity fairness scheduler, updating priority weights via virtual queues and Lyapunov Drift Plus Penalty. This is demonstrated through experiments using proportional and max-min fairness.

Secure aggregation is concerned with the task of securely uploading the inputs of multiple users to an aggregation server without letting the server know the inputs beyond their summation. It finds broad applications in distributed machine learning paradigms such as federated learning (FL) where multiple clients, each having access to a proprietary dataset, periodically upload their locally trained models (abstracted as inputs) to a parameter server which then generates an aggregate (e.g., averaged) model that is sent back to the clients as an initializing point for a new round of local training. To enhance the data privacy of the clients, secure aggregation protocols are developed using techniques from cryptography to ensure that the server infers no more information of the users' inputs beyond the desired aggregated input, even if the server can collude with some users. Although laying the ground for understanding the fundamental utility-security trade-off in secure aggregation, the simple star client-server architecture cannot capture more complex network architectures used in practical systems. Motivated by hierarchical federated learning, we investigate the secure aggregation problem in a $3$-layer hierarchical network consisting of clustered users connecting to an aggregation server through an intermediate layer of relays. Besides the conventional server security which requires that the server learns nothing beyond the desired sum of inputs, relay security is also imposed so that the relays infer nothing about the users' inputs and remain oblivious. For such a hierarchical secure aggregation (HSA) problem, we characterize the optimal multifaceted trade-off between communication (in terms of user-to-relay and relay-to-server communication rates) and secret key generation efficiency (in terms of individual key and source key rates).

We consider an integrated sensing and communication (ISAC) system with a single communication user and multiple targets. For the communication functionality, the achievable rate is employed as the performance metric, while for sensing, we focus on minimizing the mean squared error (MSE) between the designed beampattern and a desired one for tracking the targets. Towards this, and by assuming that there are fewer radiofrequency (RF) chains than antenna elements at the transmitter (Tx), we focus on the joint antenna selection (AS) and covariance matrix (CM) optimization at the Tx. This is a mixed-integer optimization problem, yet we demonstrate that it can be efficiently solved, in polynomial time, by combining convex optimization tools with dynamic programming (DP). By introducing an adjustable trade-off parameter, we formulate a joint objective function that captures both the communication and sensing metric. In this way, different ISAC solutions can be obtained, considering the trade-off among the two functionalities. It is shown that selecting the active antennas with our proposed method is superior than assuming a uniform Tx array with fixed antenna positions. Notably, by individually considering the optimization of either the sensing or the communication system alone, our proposed algorithm outperforms the literature proposals, by incurring only a small increase in complexity.

Motivated by the recent interest in approximate message passing (AMP) for matrix-valued linear observations with superposition of \emph{multiple statistically asymmetric signal sources}, we introduce a multi-source AMP framework in which the dictionary matrices associated with each signal source are drawn from a \emph{random semi-unitary ensemble} (rather than the standard Gaussian matrix ensemble.) While a similar model has been explored by Vehkaper{\"a}, Kabashima, and Chatterjee (2016) using the replica method, here we present an AMP algorithm and provide a high-dimensional yet \emph{finite-sample} analysis. As a proof of concept, we show the effectiveness of the proposed approach on the problem of \emph{message detection and channel estimation} in an unsourced random access scenario in wireless communication., Comment: 13 pages, 5 figures

In recent years, several studies have explored deep learning algorithms to predict large-scale signal fading, or path loss, in urban communication networks. The goal is to replace costly measurement campaigns, inaccurate statistical models, or computationally expensive ray-tracing simulations with machine learning models that deliver quick and accurate predictions. We focus on predicting path loss radio maps using convolutional neural networks, leveraging aerial images alone or in combination with supplementary height information. Notably, our approach does not rely on explicit classification of environmental objects, which is often unavailable for most locations worldwide. While the prediction of radio maps using complete 3D environmental data is well-studied, the use of only aerial images remains under-explored. We address this gap by showing that state-of-the-art models developed for existing radio map datasets can be effectively adapted to this task, achieving strong performance. Additionally, we introduce a new model that slightly exceeds the performance of the present state-of-the-art with reduced complexity. The trained models are differentiable, and therefore they can be incorporated in various network optimization algorithms. While an extensive discussion is beyond this paper's scope, we demonstrate this through an example optimizing the directivity of base stations in cellular networks via backpropagation to enhance coverage., Comment: 12 pages, 8 Figures, This work has been submitted to the IEEE for possible publication. arXiv admin note: substantial text overlap with arXiv:2402.00878

Physical layer deception (PLD) is a novel security mechanism that combines physical layer security (PLS) with deception technologies to actively defend against eavesdroppers. In this paper, we establish a novel semantic model for PLD that evaluates its performance in terms of semantic distortion. By analyzing semantic distortion at varying levels of knowledge on the receiver's part regarding the key, we derive the receiver's optimal decryption strategy, and consequently, the transmitter's optimal deception strategy. The proposed semantic model provides a more generic understanding of the PLD approach independent from coding or multiplexing schemes, and allows for efficient real-time adaptation to fading channels., Comment: Submitted to ICC 2025

In this paper, we investigate the performance of the cross-domain iterative detection (CDID) framework with orthogonal time frequency space (OTFS) modulation, where two distinct CDID algorithms are presented. The proposed schemes estimate/detect the information symbols iteratively across the frequency domain and the delay-Doppler (DD) domain via passing either the a posteriori or extrinsic information. Building upon this framework, we investigate the error performance by considering the bias evolution and state evolution. Furthermore, we discuss their error performance in convergence and the DD domain error state lower bounds in each iteration. Specifically, we demonstrate that in convergence, the ultimate error performance of the CDID passing the a posteriori information can be characterized by two potential convergence points. In contrast, the ultimate error performance of the CDID passing the extrinsic information has only one convergence point, which, interestingly, aligns with the matched filter bound. Our numerical results confirm our analytical findings and unveil the promising error performance achieved by the proposed designs.

We consider unsourced random access (uRA) in user-centric cell-free (CF) wireless networks, where random access users send codewords from a common codebook during specifically dedicated random access channel (RACH) slots. The system is conceptually similar to the so-called 2-step RACH currently discussed in 3GPP standardization. In order to cope with the distributed and CF nature of the network, we propose to partition the network coverage area into zones (referred to as ''locations'') and assign an uRA codebook to each location, such that users in a certain location make use of the associated codebook. The centralized uRA decoder makes use of the multisource AMP algorithm recently proposed by the authors. This yields at once the list of active uRA codewords, an estimate of the corresponding channel vectors, and an estimate of the active users' position. We show excellent performance of this approach and perfect agreement with the rigorous theoretical ''state evolution'' analysis. We also show that the proposed ''location-based'' partitioned codebook approach significantly outperforms a baseline system with a single non-partitioned uRA codebook., Comment: 5 pages, 7 figures, to be published in 25th IEEE International Workshop on Signal Processing Advances in Wireless Communications (SPAWC)

Federated learning (FL) has recently gained significant momentum due to its potential to leverage large-scale distributed user data while preserving user privacy. However, the typical paradigm of FL faces challenges of both privacy and robustness: the transmitted model updates can potentially leak sensitive user information, and the lack of central control of the local training process leaves the global model susceptible to malicious manipulations on model updates. Current solutions attempting to address both problems under the one-server FL setting fall short in the following aspects: 1) designed for simple validity checks that are insufficient against advanced attacks (e.g., checking norm of individual update); and 2) partial privacy leakage for more complicated robust aggregation algorithms (e.g., distances between model updates are leaked for multi-Krum). In this work, we formalize a novel security notion of aggregated privacy that characterizes the minimum amount of user information, in the form of some aggregated statistics of users' updates, that is necessary to be revealed to accomplish more advanced robust aggregation. We develop a general framework PriRoAgg, utilizing Lagrange coded computing and distributed zero-knowledge proof, to execute a wide range of robust aggregation algorithms while satisfying aggregated privacy. As concrete instantiations of PriRoAgg, we construct two secure and robust protocols based on state-of-the-art robust algorithms, for which we provide full theoretical analyses on security and complexity. Extensive experiments are conducted for these protocols, demonstrating their robustness against various model integrity attacks, and their efficiency advantages over baselines.

This paper aims to answer a fundamental question in the area of Integrated Sensing and Communications (ISAC): What is the optimal communication-centric ISAC waveform for ranging? Towards that end, we first established a generic framework to analyze the sensing performance of communication-centric ISAC waveforms built upon orthonormal signaling bases and random data symbols. Then, we evaluated their ranging performance by adopting both the periodic and aperiodic auto-correlation functions (P-ACF and A-ACF), and defined the expectation of the integrated sidelobe level (EISL) as a sensing performance metric. On top of that, we proved that among all communication waveforms with cyclic prefix (CP), the orthogonal frequency division multiplexing (OFDM) modulation is the only globally optimal waveform that achieves the lowest ranging sidelobe for quadrature amplitude modulation (QAM) and phase shift keying (PSK) constellations, in terms of both the EISL and the sidelobe level at each individual lag of the P-ACF. As a step forward, we proved that among all communication waveforms without CP, OFDM is a locally optimal waveform for QAM/PSK in the sense that it achieves a local minimum of the EISL of the A-ACF. Finally, we demonstrated by numerical results that under QAM/PSK constellations, there is no other orthogonal communication-centric waveform that achieves a lower ranging sidelobe level than that of the OFDM, in terms of both P-ACF and A-ACF cases., Comment: 16 pages, 11 figures, submitted to IEEE for possible publication

Multiple access is the cornerstone technology for each generation of wireless cellular networks and resource allocation design plays a crucial role in multiple access. In this paper, we present a comprehensive tutorial overview for junior researchers in this field, aiming to offer a foundational guide for resource allocation design in the context of next-generation multiple access (NGMA). Initially, we identify three types of channels in future wireless cellular networks over which NGMA will be implemented, namely: natural channels, reconfigurable channels, and functional channels. Natural channels are traditional uplink and downlink communication channels; reconfigurable channels are defined as channels that can be proactively reshaped via emerging platforms or techniques, such as intelligent reflecting surface (IRS), unmanned aerial vehicle (UAV), and movable/fluid antenna (M/FA); and functional channels support not only communication but also other functionalities simultaneously, with typical examples including integrated sensing and communication (ISAC) and joint computing and communication (JCAC) channels. Then, we introduce NGMA models applicable to these three types of channels that cover most of the practical communication scenarios of future wireless communications. Subsequently, we articulate the key optimization technical challenges inherent in the resource allocation design for NGMA, categorizing them into rate-oriented, power-oriented, and reliability-oriented resource allocation designs. The corresponding optimization approaches for solving the formulated resource allocation design problems are then presented. Finally, simulation results are presented and discussed to elucidate the practical implications and insights derived from resource allocation designs in NGMA., Comment: 69 pages, 10 figures, 5 tables

This paper investigates the achievable region of a $K$-user discrete memoryless (DM) multiple access wiretap (MAC-WT) channel, where each user transmits both secret and open messages. All these messages are intended for Bob, while Eve is only interested in the secret messages. In the achievable coding strategy, the confidential information is protected by open messages and also by the introduction of auxiliary messages. When introducing an auxiliary message, one has to ensure that, on one hand, its rate is large enough for protecting the secret message from Eve and, on the other hand, the resulting sum rate (together with the secret and open message rate) does not exceed Bob's decoding capability. This yields an inequality structure involving the rates of all users' secret, open, and auxiliary messages. To obtain the rate region, the auxiliary message rates must be eliminated from the system of inequalities. A direct application of the Fourier-Motzkin elimination procedure is elusive since a) it requires that the number of users $K$ is explicitly given, and b) even for small $K = 3, 4, \ldots$, the number of inequalities becomes extremely large. We prove the result for general $K$ through the combined use of Fourier-Motzkin elimination procedure and mathematical induction. This paper adopts the strong secrecy metric, characterized by information leakage. To prove the achievability under this criterion, we analyze the resolvability region of a $K$-user DM-MAC channel. In addition, we show that users with zero secrecy rate can play different roles and use different strategies in encoding their messages. These strategies yield non-redundant rate inequalities. By considering all possible coding strategies, we provide a new achievable region for the considered channel, and show that it strictly improves those already known in the existing literature by considering a specific example., Comment: 61 pages, 15 figures. arXiv admin note: text overlap with arXiv:2209.05403

This paper investigates radar-assisted user acquisition for downlink multi-user multiple-input multiple-output (MIMO) transmission using Orthogonal Frequency Division Multiplexing (OFDM) signals. Specifically, we formulate a concise mathematical model for the user acquisition problem, where each user is characterized by its delay and beamspace response. Therefore, we propose a two-stage method for user acquisition, where the Multiple Signal Classification (MUSIC) algorithm is adopted for delay estimation, and then a least absolute shrinkage and selection operator (LASSO) is applied for estimating the user response in the beamspace. Furthermore, we also provide a comprehensive performance analysis of the considered problem based on the pair-wise error probability (PEP). Particularly, we show that the rank and the geometric mean of non-zero eigenvalues of the squared beamspace difference matrix determines the user acquisition performance. More importantly, we reveal that simultaneously probing multiple beams outperforms concentrating power on a specific beam direction in each time slot under the power constraint, when only limited OFDM symbols are transmitted. Our numerical results confirm our conclusions and also demonstrate a promising acquisition performance of the proposed two-stage method.

Physical layer security (PLS) is a promising technology to secure wireless communications by exploiting the physical properties of the wireless channel. However, the passive nature of PLS creates a significant imbalance between the effort required by eavesdroppers and legitimate users to secure data. To address this imbalance, in this article, we propose a novel framework of physical layer deception (PLD), which combines PLS with deception technologies to actively counteract wiretapping attempts. Combining a two-stage encoder with randomized ciphering and non-orthogonal multiplexing, the PLD approach enables the wireless communication system to proactively counter eavesdroppers with deceptive messages. Relying solely on the superiority of the legitimate channel over the eavesdropping channel, the PLD framework can effectively protect the confidentiality of the transmitted messages, even against eavesdroppers who possess knowledge equivalent to that of the legitimate receiver. We prove the validity of the PLD framework with in-depth analyses and demonstrate its superiority over conventional PLS approaches with comprehensive numerical benchmarks., Comment: Accepted for publication in IEEE Transactions on Wireless Communications

Millimeter wave (mmWave) cell-free massive MIMO (CF mMIMO) is a promising solution for future wireless communications. However, its optimization is non-trivial due to the challenging channel characteristics. We show that mmWave CF mMIMO optimization is largely an assignment problem between access points (APs) and users due to the high path loss of mmWave channels, the limited output power of the amplifier, and the almost orthogonal channels between users given a large number of AP antennas. The combinatorial nature of the assignment problem, the requirement for scalability, and the distributed implementation of CF mMIMO make this problem difficult. In this work, we propose an unsupervised machine learning (ML) enabled solution. In particular, a graph neural network (GNN) customized for scalability and distributed implementation is introduced. Moreover, the customized GNN architecture is hierarchically permutation-equivariant (HPE), i.e., if the APs or users of an AP are permuted, the output assignment is automatically permuted in the same way. To address the combinatorial problem, we relax it to a continuous problem, and introduce an information entropy-inspired penalty term. The training objective is then formulated using the augmented Lagrangian method (ALM). The test results show that the realized sum-rate outperforms that of the generalized serial dictatorship (GSD) algorithm and is very close to the upper bound in a small network scenario, while the upper bound is impossible to obtain in a large network scenario.

We propose a power- and hardware-efficient, pragmatic, modular, multiuser/multibeam array-fed RIS architecture particularly suited to operate in very high frequency bands (high mmWave and sub-THz), where channels are typically sparse in the beamspace and line-of-sight (LOS) is required to achieve an acceptable received signal level. The key module is an active multi-antenna feeder (AMAF) with a small number of active antennas placed in the near field of a RIS with a much larger number of passive controllable reflecting elements. We propose a pragmatic approach to obtain a steerable beam with high gain and very low sidelobes. Then, $K$ independently controlled beams can be achieved by stacking $K$ of such AMAF-RIS modules. Our analysis takes in full account: 1) the near-end crosstalk (NEXT) between the modules, 2) the far-end crosstalk (FEXT) due to the sidelobes; 3) a thorough energy efficiency comparison with respect to conventional active arrays with the same beamforming performance. Overall, we show that the proposed architecture is very attractive in terms of spectral efficiency, ease of implementation (hardware complexity), and energy efficiency., Comment: 5 pages, 8 figures, The 25th IEEE International Workshop on Signal Processing Advances in Wireless Communications (SPAWC) 2024, Lucca, Italy. This paper is a condensed version of our earlier work (arXiv:2311.18593), focusing specifically on the example of a 16x16 RIS fed by a 2x2 AMAF presented at SPAWC 2024. For a more comprehensive treatment, including log scale ground footprints, RIS phase heat maps, frequency selectivity analysis for broadband design, beam steering-based codebook design, zero forcing precoding, benchmark comparisons against optimum active arrays, multiple examples, and detailed power efficiency analysis, please refer to the full version in arXiv:2311.18593.

This paper explores the fundamental limits of unsourced random access (URA) with a random and unknown number ${\rm{K}}_a$ of active users in MIMO quasi-static Rayleigh fading channels. First, we derive an upper bound on the probability of incorrectly estimating the number of active users. We prove that it exponentially decays with the number of receive antennas and eventually vanishes, whereas reaches a plateau as the power and blocklength increase. Then, we derive non-asymptotic achievability and converse bounds on the minimum energy-per-bit required by each active user to reliably transmit $J$ bits with blocklength $n$. Numerical results verify the tightness of our bounds, suggesting that they provide benchmarks to evaluate existing schemes. The extra required energy-per-bit due to the uncertainty of the number of active users decreases as $\mathbb{E}[{\rm{K}}_a]$ increases. Compared to random access with individual codebooks, the URA paradigm achieves higher spectral and energy efficiency. Moreover, using codewords distributed on a sphere is shown to outperform the Gaussian random coding scheme in the non-asymptotic regime., Comment: Accepted by ISIT 2024

The recently proposed orthogonal time frequency space (OTFS) modulation, which is a typical Delay-Doppler (DD) communication scheme, has attracted significant attention thanks to its appealing performance over doubly-selective channels. In this paper, we present the fundamentals of general DD communications from the viewpoint of the Zak transform. We start our study by constructing DD domain basis functions aligning with the time-frequency (TF)-consistency condition, which are globally quasi-periodic and locally twisted-shifted. We unveil that these features are translated to unique signal structures in both time and frequency, which are beneficial for communication purposes. Then, we focus on the practical implementations of DD Nyquist communications, where we show that rectangular windows achieve perfect DD orthogonality, while truncated periodic signals can obtain sufficient DD orthogonality. Particularly, smoothed rectangular window with excess bandwidth can result in a slightly worse orthogonality but better pulse localization in the DD domain. Furthermore, we present a practical pulse shaping framework for general DD communications and derive the corresponding input-output relation under various shaping pulses. Our numerical results agree with our derivations and also demonstrate advantages of DD communications over conventional orthogonal frequency-division multiplexing (OFDM).

This work focuses on quality adaptation as a means to counter the effects of channel degradation in wireless, cache-aided channels. We design a delivery scheme which combines coded caching, superposition coding, and scalable source coding, while keeping the caching scheme oblivious to channel qualities. By properly adjusting the quality at the degraded users we are able to satisfy all demands in a time-efficient manner. In addition, superposition coding allows us to serve high-rate users with high content quality without subjecting them to a delay penalty caused by users with lower rate channels. We design a communication framework that covers all possible channel rate and quality configurations and we further provide algorithms that can optimise the served quality. An interesting outcome of this work is that a modest quality reduction at the degraded users can counter the effects of significant channel degradation. For example, in a 100-user system with normalized cache size 1/10 at each user, if 10 users experience channel degradation of 60% compared to the rate of the non-degraded users, we show that our transmission strategy leads to a 85% quality at the degraded users and perfect quality at the non-degraded users., Comment: Submitted to Transactions on Communications

Integrated Sensing and Communication (ISAC) has been identified as a pillar usage scenario for the impending 6G era. Bi-static sensing, a major type of sensing in ISAC, is promising to expedite ISAC in the near future, as it requires minimal changes to the existing network infrastructure. However, a critical challenge for bi-static sensing is clock asynchronism due to the use of different clocks at far-separated transmitters and receivers. This causes the received signal to be affected by time-varying random phase offsets, severely degrading, or even failing, direct sensing. Hence, to effectively enable ISAC, considerable research has been directed toward addressing the clock asynchronism issue in bi-static sensing. This paper provides an overview of the issue and existing techniques developed in an ISAC background. Based on the review and comparison, we also draw insights into the future research directions and open problems, aiming to nurture the maturation of bi-static sensing in ISAC., Comment: 20 pages, 6 figures, 1 table

Over the last years, several works have explored the application of deep learning algorithms to determine the large-scale signal fading (also referred to as ``path loss'') between transmitter and receiver pairs in urban communication networks. The central idea is to replace costly measurement campaigns, inaccurate statistical models or computationally expensive ray-tracing simulations by machine learning models which, once trained, produce accurate predictions almost instantly. Although the topic has attracted attention from many researchers, there are few open benchmark datasets and codebases that would allow everyone to test and compare the developed methods and algorithms. We take a step towards filling this gap by releasing a publicly available dataset of simulated path loss radio maps together with realistic city maps from real-world locations and aerial images from open datasources. Initial experiments regarding model architectures, input feature design and estimation of radio maps from aerial images are presented and the code is made available., Comment: 13 pages, 121 figures, This work has been submitted to the IEEE for possible publication

This paper presents a comprehensive communication theoretic model for the physical layer of a cell-free user-centric network, formed by user equipments (UEs), radio units (RUs), and decentralized units (DUs), uniformly spatially distributed over a given coverage area. We consider RUs equipped with multiple antennas, and focus on the regime where the UE, RU, and DU densities are constant and therefore the number of such nodes grows with the coverage area. A system is said scalable if the computing load and information rate at any node in the network converges to a constant as the network size (coverage area) grows to infinity. This imposes that each UE must be processed by a (user-centric) finite-size cluster of RUs, and that such cluster processors are dynamically allocated to the DUs (e.g., as software defined virtual network functions) in order to achieve a balanced computation load. We also assume that the RUs are connected to the DUs through a packet switching network, in order to achieve adaptive routing and load balance. For this model, we define in details the dynamic cluster formation and uplink pilot allocation. As a consequence of the pilot allocation and the scalability constraint, each cluster processor has a partial view of the network channel state information. We define the condition of ``ideal partial CSI'' when the channel vectors that can be estimated are perfectly known (while the ones that cannot be estimated are not know at all). We develop two attractive cluster-based linear receiver schemes for the uplink, and an uplink-downlink duality that allows to reuse such vectors as precoders for the downlink.

Ultra-dense cell-free massive multiple-input multiple-output (CF-MMIMO) has emerged as a promising technology expected to meet the future ubiquitous connectivity requirements and ever-growing data traffic demands in 6G. This article provides a contemporary overview of ultra-dense CF-MMIMO networks, and addresses important unresolved questions on their future deployment. We first present a comprehensive survey of state-of-the-art research on CF-MMIMO and ultra-dense networks. Then, we discuss the key challenges of CF-MMIMO under ultra-dense scenarios such as low-complexity architecture and processing, low-complexity/scalable resource allocation, fronthaul limitation, massive access, synchronization, and channel acquisition. Finally, we answer key open questions, considering different design comparisons and discussing suitable methods dealing with the key challenges of ultra-dense CF-MMIMO. The discussion aims to provide a valuable roadmap for interesting future research directions in this area, facilitating the development of CF-MMIMO MIMO for 6G., Comment: Proceedings of the IEEE, accepted

Coded caching (CC) schemes exploit the cumulative cache memory of network users, outperforming traditional uncoded schemes where cache contents are only used locally. Interestingly, this CC gain can also be combined with the spatial multiplexing gain of multi-antenna transmissions. In this paper, we extend the existing results of CC-aided data delivery in multi-access point (AP) wireless local area networks (WLAN) and video streaming applications by assuming multi-antenna transmitters at AP nodes. We present two distinct methods for using the extra resource that multi-antenna transmitters provide. While the first method tries to reduce the number of interference links in the network graph, the second one aims to remove inter-stream interference so that users with similar cache contents can be served simultaneously. While both methods provide increased throughput, they differ significantly in the underlying concept. Numerical simulations are used to compare the performance of different methods.

We present a novel, power- & hardware-efficient, multiuser, multibeam RIS (Reflective Intelligent Surface) architecture for multiuser MIMO, especially for very high frequency bands (e.g., high mmWave and sub-THz), where channels are typically sparse in the beamspace and LOS is the dominant component. The key module is formed by an active multiantenna feeder (AMAF) with a small number of active antennas, placed in the near field of a RIS with a much larger number of passive controllable reflecting elements. We propose a pragmatic approach to obtain a steerable beam with high gain and very low sidelobes. Then K independently controlled beams can be achieved by closely stacking K such AMAF-RIS modules. Our analysis includes the mutual interference between the modules and the fact that, due to the delay difference of propagation through the AMAF-RIS structure, the resulting channel matrix is frequency selective even for pure LOS propagation. We consider a 3D geometry and show that "beam focusing" is in fact possible (and much more effective in terms of coverage) also in the far-field, by creating spotbeams with limited footprint both in angle and in range. Our results show that: 1) simple RF beamforming (BF) without computationally expensive baseband multiuser precoding is sufficient to practically eliminate multiuser interference when the users are chosen with sufficient angular/range separation, thanks to the extremely low sidelobe beams; 2) the impact of beam pointing errors with standard deviation as large as 2.5 deg and RIS quantized phase-shifters with quantization bits > 2 is essentially negligible; 3) The proposed architecture is more power efficient & much simpler from a hardware implementation viewpoint than standard active arrays with the same BF performance. We show also that the array gain of the proposed AMAF-RIS structure is linear with the RIS aperture., Comment: 13 pages

This paper studies a multiaccess coded caching (MACC) where the connectivity topology between the users and the caches can be described by a class of combinatorial designs. Our model includes as special cases several MACC topologies considered in previous works. The considered MACC network includes a server containing $N$ files, $\Gamma$ cache nodes and $K$ cacheless users, where each user can access $L$ cache nodes. The server is connected to the users via an error-free shared link, while the users can retrieve the cache content of the connected cache-nodes while the users can directly access the content in their connected cache-nodes. Our goal is to minimise the worst-case transmission load on the shared link in the delivery phase. The main limitation of the existing MACC works is that only some specific access topologies are considered, and thus the number of users $K$ should be either linear or exponential to $\Gamma$. We overcome this limitation by formulating a new access topology derived from two classical combinatorial structures, referred to as the $t$-design and the $t$-group divisible design. In these topologies, $K$ scales linearly, polynomially, or even exponentially with $\Gamma$. By leveraging the properties of the considered combinatorial structures, we propose two classes of coded caching schemes for a flexible number of users, where the number of users can scale linearly, polynomially or exponentially with the number of cache nodes. In addition, our schemes can unify most schemes for the shared link network and unify many schemes for the multi-access network except for the cyclic wrap-around topology., Comment: 48 pages

Semantic communication, rather than on a bit-by-bit recovery of the transmitted messages, focuses on the meaning and the goal of the communication itself. In this paper, we propose a novel semantic image coding scheme that preserves the semantic content of an image, while ensuring a good trade-off between coding rate and image quality. The proposed Semantic-Preserving Image Coding based on Conditional Diffusion Models (SPIC) transmitter encodes a Semantic Segmentation Map (SSM) and a low-resolution version of the image to be transmitted. The receiver then reconstructs a high-resolution image using a Denoising Diffusion Probabilistic Models (DDPM) doubly conditioned to the SSM and the low-resolution image. As shown by the numerical examples, compared to state-of-the-art (SOTA) approaches, the proposed SPIC exhibits a better balance between the conventional rate-distortion trade-off and the preservation of semantically-relevant features. Code available at https://github.com/frapez1/SPIC, Comment: Accepted at ICASSP 2024

We consider scalable cell-free massive multiple-input multiple-output networks under an open radio access network paradigm comprising user equipments (UEs), radio units (RUs), and decentralized processing units (DUs). UEs are served by dynamically allocated user-centric clusters of RUs. The corresponding cluster processors (implementing the physical layer for each user) are hosted by the DUs as software-defined virtual network functions. Unlike the current literature, mainly focused on the characterization of the user rates under unrestricted fronthaul communication and computation, in this work we explicitly take into account the fronthaul topology, the limited fronthaul communication capacity, and computation constraints at the DUs. In particular, we systematically address the new problem of joint fronthaul load balancing and allocation of the computation resource. As a consequence of our new optimization framework, we present representative numerical results highlighting the existence of an optimal number of quantization bits in the analog-to-digital conversion at the RUs., Comment: 15 pages, 7 figures, accepted to be published in IEEE Transactions on Wireless Communications

This paper considers the secure aggregation problem for federated learning under an information theoretic cryptographic formulation, where distributed training nodes (referred to as users) train models based on their own local data and a curious-but-honest server aggregates the trained models without retrieving other information about users' local data. Secure aggregation generally contains two phases, namely key sharing phase and model aggregation phase. Due to the common effect of user dropouts in federated learning, the model aggregation phase should contain two rounds, where in the first round the users transmit masked models and, in the second round, according to the identity of surviving users after the first round, these surviving users transmit some further messages to help the server decrypt the sum of users' trained models. The objective of the considered information theoretic formulation is to characterize the capacity region of the communication rates in the two rounds from the users to the server in the model aggregation phase, assuming that key sharing has already been performed offline in prior. In this context, Zhao and Sun completely characterized the capacity region under the assumption that the keys can be arbitrary random variables. More recently, an additional constraint, known as "uncoded groupwise keys," has been introduced. This constraint entails the presence of multiple independent keys within the system, with each key being shared by precisely S users. The capacity region for the information-theoretic secure aggregation problem with uncoded groupwise keys was established in our recent work subject to the condition S > K - U, where K is the number of total users and U is the designed minimum number of surviving users. In this paper we fully characterize of the the capacity region for this problem by proposing a new converse bound and an achievable scheme., Comment: 37 pages, 3 figures

Sensing and communications (S&C) have been historically developed in parallel. In recent decade, they have been evolving from separation to integration, giving rise to the integrated sensing and communications (ISAC) paradigm, that has been recognized as one of the six key 6G usage scenarios. Despite the plethora of research works dedicated to ISAC signal processing, the fundamental performance limits of S&C remain widely unexplored in an ISAC system. In this tutorial paper, we attempt to summarize the recent research findings in characterizing the performance boundary of ISAC systems and the resulting S&C tradeoff from an information-theoretical viewpoint. We begin with a folklore "torch metaphor" that depicts the resource competition mechanism of S&C. Then, we elaborate on the fundamental capacity-distortion (C-D) theory, indicating the incompleteness of this metaphor. Towards that end, we further elaborate on the S&C tradeoff by discussing a special case within the C-D framework, namely the Cramer-Rao bound (CRB)-rate region. In particular, S&C have preference discrepancies over both the subspace occupied by the transmitted signal and the adopted codebook, leading to a "projector metaphor" complementary to the ISAC torch analogy. We also present two practical design examples by leveraging the lessons learned from fundamental theories. Finally, we conclude the paper by identifying a number of open challenges., Comment: 15 pages, 11 figures, submitted to IEEE BITS the Information Theory Magazine

To foster research and facilitate fair comparisons among recently proposed pathloss radio map prediction methods, we have launched the ICASSP 2023 First Pathloss Radio Map Prediction Challenge. In this short overview paper, we briefly describe the pathloss prediction problem, the provided datasets, the challenge task and the challenge evaluation methodology. Finally, we present the results of the challenge., Comment: ICASSP 2023

This work proposes a maximum likelihood (ML)-based parameter estimation framework for a millimeter wave (mmWave) integrated sensing and communication (ISAC) system in a multi-static configuration using energy-efficient hybrid digital-analog arrays. Due to the typically large arrays deployed in the higher frequency bands to mitigate isotropic path loss, such arrays may operate in the near-field regime. The proposed parameter estimation in this work consists of a two-stage estimation process, where the first stage is based on far-field assumptions, and is used to obtain a first estimate of the target parameters. In cases where the target is determined to be in the near-field of the arrays, a second estimation based on near-field assumptions is carried out to obtain more accurate estimates. In particular, we select beamfocusing array weights designed to achieve a constant gain over an extended spatial region and re-estimate the target parameters at the receivers. We evaluate the effectiveness of the proposed framework in numerous scenarios through numerical simulations and demonstrate the impact of the custom-designed flat-gain beamfocusing codewords in increasing the communication performance of the system., Comment: 16 pages

We investigate radar parameter estimation and beam tracking with a hybrid digital-analog (HDA) architecture in a multi-block measurement framework using an extended target model. In the considered setup, the backscattered data signal is utilized to predict the user position in the next time slots. Specifically, a simplified maximum likelihood framework is adopted for parameter estimation, based on which a simple tracking scheme is also developed. Furthermore, the proposed framework supports adaptive transmitter beamwidth selection, whose effects on the communication performance are also studied. Finally, we verify the effectiveness of the proposed framework via numerical simulations over complex motion patterns that emulate a realistic integrated sensing and communication (ISAC) scenario., Comment: 6 pages

This study investigates simpler alternatives to coherent joint transmission for supporting robust connectivity against signal blockage in mmWave/sub-THz access networks. By taking an information-theoretic viewpoint, we demonstrate analytically that with a careful design, full macrodiversity gains and significant SNR gains can be achieved through canonical receivers and minimal coordination and synchronization requirements at the infrastructure side. Our proposed scheme extends non-coherent joint transmission by employing a special form of diversity to counteract artificially induced deep fades that would otherwise make this technique often compare unfavorably against standard transmitter selection schemes. Additionally, the inclusion of an Alamouti-like space-time coding layer is shown to recover a significant fraction of the optimal performance. Our conclusions are based on a statistical single-user multi-point intermittent block fading channel model that, although simplified, enables rigorous ergodic and outage rate analysis, while also considering timing offsets due to imperfect delay compensation. In addition, we validate our theoretical approach by means of deterministic ray-tracing simulations that capture the essential features of next generation mmWave/sub-THz communications., Comment: Accepted version