Search

Perfluorosulfonic acids (PFSAs) are a recalcitrant subclass of per- and polyfluoroalkyl substances (PFASs) linked to numerous negative health effects in humans. Scalable technologies that effectively destroy PFSAs will greatly reduce the future health and ecological impact of these "forever chemicals". Herein, we show that several PFSAs undergo facile mechanochemical destruction (MCD) in the presence of quartz sand (SiO

Confinement effects offer unique opportinuties to facilitate reactions in a way to favor sustainability... in an almost magical way.

The effect of the amphiphilic nanostructure of ionic liquids on the dehydration of secondary alcohols to alkenes has been investigated. The influence of these nanostructures was inverted when an acid catalyst was added to the reaction. This phenomenon was ascribed to a balance between ion-solute interactions and the formation of solute-catalyst hydrogen bonds, highlighting the complex interplay between interactions and reaction outcomes in these nanostructured solvent systems.

Micellar catalysis has been established for several decades although has recently been gaining attention as a method for enabling greener chemical synthesis. While the main reason underpinning the modern renaissance of micellar catalysis is the ability to perform reactions using water as a solvent, the use of micellar conditions influences reactivity in ways that do not occur in homogeneous solutions, owing to the confinement of reagents within the micelle and their interactions with micellar headgroups. Recently, it has been discovered that ionic liquids, low-melting salts, can form amphiphilic nanostructures with bicontinuous polar and non-polar domains. Here, we review the evidence to date of the influence of ionic liquid nanostructure on reactivity in comparison with the known influence of micellar catalysis to examine the relationship between these approaches to reactivity in structured media. Key benefits and limitations of each approach are highlighted, with areas likely to benefit from the development of a deeper understanding of reactivity in nanostructured ionic liquids identified.

We have prepared novel divalent ionic liquids (ILs) based on the bis(trifluoromethylsulfonyl)imide anion where two charged imidazolium groups in the cations are either directly bound to each other or linked by a single atom. We assessed the influence of the side-chain functionality and divalency on their physical properties and on the thermodynamics of mixing. The results indicate that shortening the spacer of a divalent IL reduces its thermal stability and increases its viscosity. Mixtures of divalent and monovalent ILs show small but significant deviations from ideality upon mixing. These deviations appear to depend primarily on the (mis)match of the nature and length of the cation side-chain. The non-ideality imposed by mixing ILs with different side-chains appears to be enhanced by the increase in formal charge of the cations in the mixture.

Ionic liquids are versatile solvents that can be tailored through modification of the cation and anion species. Relatively little is known about the corrosive properties of protic ionic liquids. In this study, we have explored the corrosion of both zinc and copper within a series of protic ionic liquids consisting of alkylammonium or alkanolammonium cations paired with nitrate or carboxylate anions along with three aprotic imidazolium ionic liquids for comparison. Electrochemical studies revealed that the presence of either carboxylate anions or alkanolammonium cations tend to induce a cathodic shift in the corrosion potential. The effect in copper was similar in magnitude for both cations and anions, while the anion effect was slightly more pronounced than that of the cation in the case of zinc. For copper, the presence of carboxylate anions or alkanolammonium cations led to a notable decrease in corrosion current, whereas an increase was typically observed for zinc. The ionic liquid-metal surface interactions were further explored for select protic ionic liquids on copper using X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) to characterize the interface. From these studies, the oxide species formed on the surface were identified, and copper speciation at the surface linked to ionic liquid and potential dependent surface passivation. Density functional theory and ab initio molecular dynamics simulations revealed that the ethanolammonium cation was more strongly bound to the copper surface than the ethylammonium counterpart. In addition, the nitrate anion was more tightly bound than the formate anion. These likely lead to competing effects on the process of corrosion: the tightly bound cations act as a source of passivation, whereas the tightly bound anions facilitate the electrodissolution of the copper.

Ionic liquids (ILs) containing sufficiently long alkyl chains form amphiphilic nanostructures with well-defined polar and non-polar domains. Here we have explored the robustness of these amphiphilic nanostructures to added solutes and gained insight into how the nature of the solute and IL ions affect the partitioning of these solutes within the nanostructured domains of ILs. To achieve this, small angle X-ray scattering (SAXS) investigations were performed and discussed for mixtures of 9 different molecular compounds with 6 different ILs containing imidazolium cations. The amphiphilic nanostructure of ILs persisted to high solute concentrations, over 50 mol% of added solute for most 1-butyl-3-methylimidazolium ILs and above 80 mol% for most 1-decyl-3-methylimidazolium ILs. Solute partitioning within these domains was found to be controlled by the inherent polarity and size of the solute, as well as specific interactions between the solute and IL ions, with SAXS results corroborated with IR spectroscopy and molecular dynamics simulations. Molecular dynamics simulations also revealed the ability to induce π+-π+ stacking between imidazolium cations through the use of these added molecular compounds. Collectively, these results provide scope for the selection of IL ions to rationally influence and control the partitioning behaviour of given solutes within the amphiphilic nanostructure of ILs.

Guanidinium chloride DES-like solutions exhibited strong hydrogen-bond donating properties with a range of polarity probes. Computational results found that this was caused by a cooperative effect between the cation, anion and molecular species.

Ionic liquid (IL) mixtures enable the design of fluids with finely tuned structural and physicochemical properties for myriad applications. In order to rationally develop and design IL mixtures with the desired properties, a thorough understanding of the structural origins of their physicochemical properties and the thermodynamics of mixing needs to be developed. To elucidate the structural origins of the excess molar volume within IL mixtures containing ions with different alkyl chain lengths, 3 IL mixtures containing 1-alkyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ILs have been explored in a joint small angle X-ray scattering (SAXS) and 129Xe NMR study. The apolar domains of the IL mixtures were shown to possess similar dimensions to the largest alkyl chain of the mixture with the size evolution determined by whether the shorter alkyl chain was able to interact with the apolar domain. 129Xe NMR results illustrated that the origin of excess molar volume in these mixtures was due to fluctuations within these apolar domains arising from alkyl chain mismatch, with the formation of a greater number of smaller voids within the IL structure. These results indicate that free volume effects for these types of mixtures can be predicted from simple considerations of IL structure and that the structural basis for the formation of excess molar volume in these mixtures is substantially different to IL mixtures formed of different types of ions.

Microbial electrolysis cells have attracted attention as a method to enhance anaerobic digesters’ performance. However, optimization of individual factors is not directly transferrable among systems as many are intimately linked and influenced by the system design, influent, and inoculum. To avoid this, here the effects and interactions between the relative electrode size, hydraulic retention time (HRT), and voltage imposed have been explored within a pair of otherwise identical reactors. Methane production has a positive correlation with the applied voltage, reaching 12.9 mLCH4 L−1h−1 with 10 days HRT and 1000 mV, also achieving 35% energy storage efficiency, despite the higher electrical input. Shorter HRTs led to bacterial washouts, reducing the methane production below 10 mLCH4 L−1h−1. Contour plots were constructed to relate the energy storage efficiency with operational conditions changes. These highlighted the benefits of using a relatively larger cathode than anode for improving energy storage efficiency.

Ionic liquid (IL) mixtures enable the design of fluids with finely tuned structural and physicochemical properties for myriad applications. In order to rationally develop and design IL mixtures with the desired properties, a thorough understanding of the structural origins of their physicochemical properties and the thermodynamics of mixing needs to be developed. To elucidate the structural origins of the excess molar volume within IL mixtures containing ions with different alkyl chain lengths, 3 IL mixtures containing 1-alkyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ILs have been explored in a joint small angle X-ray scattering (SAXS) and 129Xe NMR study. The apolar domains of the IL mixtures were shown to possess similar dimensions to the largest alkyl chain of the mixture with the size evolution determined by whether the shorter alkyl chain was able to interact with the apolar domain. 129Xe NMR results illustrated that the origin of excess molar volume in these mixtures was due to fluctuations within these apolar domains arising from alkyl chain mismatch, with the formation of a greater number of smaller voids within the IL structure. These results indicate that free volume effects for these types of mixtures can be predicted from simple considerations of IL structure and that the structural basis for the formation of excess molar volume in these mixtures is substantially different to IL mixtures formed of different types of ions.

The structures of mixtures of ionic liquids (ILs) featuring a common 1-butyl-3-methylimidazolium ([C4C1im](+)) cation but different anions have been investigated both experimentally and computationally. (1)H and (13)C NMR of the ILs and their mixtures has been performed both on the undiluted liquids and those diluted by CD2Cl2. These experiments have been complemented by quantum chemical density functional theory calculations and molecular dynamics simulations. These techniques have identified the formation of preferential interactions between H(2) of the imidazolium cation and the most strongly hydrogen bond (H-bond) accepting anion. In addition, a preference for the more weakly H-bond accepting anion to interact above the imidazolium ring through anion-π(+) interactions has been identified. The modelling of these data has identified that the magnitude of these preferences are small, of the order of only a few kJ mol(-1), for all IL mixtures. No clustering of the anions around a specific cation could be observed, indicating that these interactions arise from the reorientation of the cation within a randomly assigned network of anions. π(+)-π(+) stacking of the imidazolium cations was also studied and found to be promoted by ILs with a strong H-bond accepting anion. Stacking interactions are easily disrupted by the introduction of small proportions (50 mol%) of a weakly coordinating anion due to their propensity to form anion-π(+) interactions. These results suggest that the formation of IL mixtures with different anions leads to subtle structural changes of much lower energy than the Coulombic ordering of ions, accounting for why most IL mixtures exhibit ideal, or nearly ideal, behaviour.

Acidic anions of ionic liquids have been demonstrated as efficient catalysts for the cleavage of the β-O-4 ether linkage prevalent in the lignin superstructure. Through the use of lignin model compounds with varying functionality and by monitoring reaction kinetics, a full mechanistic investigation into the hydrolysis of the β-O-4 linkage in acidic ionic liquid solutions is reported. Hammett acidities are reported for different 1-butyl-3-methylimidazolium hydrogen sulfate [C4C1im][HSO4] ionic liquid systems with varying acid and water concentrations and were correlated to substrate reactivity. Results show that the rate of ether cleavage increases with an increase in acidity and the initial dehydration of the model compound is the rate-determining step of the reaction. The Eyring activation parameters of the reaction in hydrogen sulfate ionic liquids with a variety of cations are reported, indicating a consistent E1 dehydration mechanism. Hydrogen bonding in protic ionic liquids was shown to significantly influence anion–cation interactions, consequently altering the solvation of the protonated starting material and therefore the overall rate of reaction. Comparison of reaction rates in these ionic liquids with results within aqueous or aqueous/organic media indicate that the ionic liquids facilitate more rapid cleavage of the β-O-4 ether linkage even under less acidic conditions. All the reported results give a complete overview of both the mechanistic and solvation effects of acidic ionic liquids on lignin model compounds and provide scope for the appropriate selection and design of ionic liquids for lignin processing.

We present a study of the reactions of aldehydes in ionic liquids which gives evidence for the spontaneous formation of N-heterocyclic carbenes in ionic liquids based on 1,3-dialkyl substituted imidazolium cations from the lack of a deuterium isotope effect on the reaction of these ionic liquids with aldehydes.

Microbial electrolysis cells (MECs) have been proposed as a method for storing surplus renewable energy as biofuels, with methane being of particular interest given the existing natural gas infrastructure. However, the effect of the relative size of electrodes and the organic load of the wastewater on the overall performance of MECs designed for methane production remains poorly understood. Here we have explored the use of two MECs containing different relative cathodic and anodic surface areas and compared their methane production from wastewater containing lw (200 ppm) or high (4000 ppm) organic loads. The MEC containing a relatively larger cathode could increase energy storage efficiency by a factor of 1.2 and 3 under high and low organic loads respectively. These results highlight that the relative surface area of the electrodes should be designed according to the rate limiting process. Larger anodes offer more suitable conditions for the attachment of fermentative bacteria, whereas larger cathodes appear to provide more appropriate conditions for methanogens.

The formation of ionic liquid (IL) mixtures has been proposed as an approach to rationally fine-tune the physicochemical properties of ILs for a variety of applications. However, the effects of forming such mixtures on the resultant properties of the liquids are only beginning to be understood. Towards a more complete understanding of both the thermodynamics of mixing ILs and the effect of mixing these liquids on their structures and physicochemical properties, the spatial arrangement and free volume of IL mixtures containing the common [C4C1im]+ cation and different anions have been systematically explored using small angle X-ray scattering (SAXS), positron annihilation lifetime spectroscopy (PALS) and 129Xe NMR techniques. Anion size has the greatest effect on the spatial arrangement of the ILs and their mixtures in terms of the size of the non-polar domains and inter-ion distances. It was found that differences in coulombic attraction between oppositely charged ions arising from the distribution of charge density amongst the atoms of the anion also significantly influences these inter-ion distances. PALS and 129Xe NMR results pertaining to the free volume of these mixtures were found to strongly correlate with each other despite the vastly different timescales of these techniques. Furthermore, the excess free volumes calculated from each of these measurements were in excellent agreement with the excess volumes of mixing measured for the IL mixtures investigated. The correspondence of these techniques indicates that the static and dynamic free volume of these liquid mixtures are strongly linked. Consequently, fluxional processes such as hydrogen bonding do not significantly contribute to the free volumes of these liquids compared to the spatial arrangement of ions arising from their size, shape and coulombic attraction. Given the relationship between free volume and transport properties such as viscosity and conductivity, these results provide a link between the structures of IL mixtures, the thermodynamics of mixing and their physicochemical properties.

The removal of carboxylic acid impurities from amide targets has been accomplished through crystallization featuring a complexing agent in solution. The interaction between the complexing agents and impurities was examined using isothermal titration calorimetry and the free energy of association obtained. From these data, the mechanism of solution association could be elucidated through the use of infrared spectroscopy, density functional theory calculations, and the judicious variation of solvent and complexing agent. Furthermore, the calculations employed were able to predict the free energy of association between the complexing agents and the impurity. This association energy was found to correlate with the improvement in purification that could be achieved by the addition of these complexing agents. Optimal complexing agent choice in a rationally selected crystallization solvent produced improvements in purity of 96%, greater than could be achieved by successive crystallizations. The applicability of ...

In this paper we derive a straightforward computational approach to predict the optimal ionic liquid (IL) solvent for a given compound, based on COSMO-RS calculations. These calculations were performed on 18 different active pharmaceutical ingredients (APIs) using a matrix of 210 hypothetical ILs. These results indicated that the 18 APIs could be classified into three distinct categories based on their relative hydrogen bond donating or accepting ability, with similar optimal IL solvent predictions within each class. Informed by these results, a family of strongly hydrogen bond donating ILs based on the N-alkylguanidinium cation were prepared and characterized. The solubility of the APIs in each of these classes was found to be qualitatively consistent with the predictions of the COSMO-RS model. The suitability of these novel guanidinium salts as crystallization solvents was demonstrated by the use of N-butylguanidinium bis(trifluoromethanesulfonyl)imide for the purification of crude fenofibrate using dimethylsulfoxide as an antisolvent, which resulted in good yields and excellent purities. Finally, a simple descriptor based model is proposed to suggest the best IL solvent for arbitrary APIs.

To facilitate the drive towards ever lower energy, ‘greener’ processing, robust bimetallic aluminosilicate-supported Pt–Ru catalysts that can operate under atmospheric conditions have been developed for the rapid room temperature hydrogenation of aromatics (toluene and tetralin) at 1 atm H2. The toluene/methylcyclohexane couple has the added interest of being a promising cyclic hydrocarbon combination for the storage of hydrogen. The easily handled air-stable catalysts were prepared using the incipient wetness method and characterised by ICP-AES, XRD, TEM as well as nitrogen sorption measurements. Compared to their monometallic counterparts, the bimetallic catalysts displayed significantly higher turn-over-frequencies (TOFs), consistent with a synergistic relationship between platinum and ruthenium.

The number of areas where ionic liquids (ILs) have been applied has increased dramatically since the beginning of the twenty-first century. In this chapter, a wide variety of IL applications are presented. For each application the role of the IL and its potential benefits are analyzed and future directions proposed. The applications outlined include the use of ILs for electrochemistry and as electrolytes; as solvents for the synthesis of organic and inorganic compounds and in the preparation of polymers; as heat transport and storage agents; within the biorefinery as solvents for the dissolution and reactivity of cellulose, hemicellulose, lignin, and wood; for analytical chemistry; and as components for tribological applications.

The ability of a binary ionic liquid (IL) system consisting of a phosphonium transition state analogue (TSA) and 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([BMIM][NTf(2)]) to accelerate the rate of the well-studied hydrolysis of a tert-alkyl picolinium salt by influencing the solvent structure was investigated. A significant rate enhancement was observed in the presence of the TSA; however, comparison with other cations illustrated that this enhancement was not unique to the chosen TSA. Instead, the rate enhancements were correlated with the dilution of hydrogen bonding by the added cations. This phenomenon was further examined by the use of 1-butyl-2,3-dimethylimidazolium bis(trifluoromethanesulfonyl)imide ([BMMIM][NTf(2)]) as a cosolvent and the use of Reichardt's dye to measure the extent of hydrogen bonding on solutes in these systems. The rate increases are rationalized in terms of weaker hydrogen bonding from the solvent system to water.

The application of ionic liquids (ILs) as solvents is frequently discussed in the context of their tunability, with the potential to tailor the solvent system uniquely to the process being investigated. Instead, here we study the potential for a single IL, 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([C2C1Im][NTf2]), to be used for the cooling crystallization of a wide range of active pharmaceutical ingredients (APIs). [C2C1Im][NTf2] was selected on the basis of its thermal stability, low reactivity, and miscibility with solvents of moderate polarity, which suggests that it is miscible with liquids that possess polarities comparable to those of many API molecules. The overwhelming majority of APIs tested were soluble at >50 wt % within [C2C1Im][NTf2] at elevated temperatures despite their relatively poor solubility at room temperature. This dramatic effect was ascribed to the miscibility of most of the molten APIs with the IL. The solubility curves for nine APIs were measured, which est...

Hydrogen bond donating cosolvents have been shown to significantly reduce the solubility of acetaminophen (AAP) in ionic liquids containing the acetate anion. Reduced solubility arises from competition for solvation by the acetate anion and can be used for the design of advanced separation techniques, illustrated by the crystallization of AAP.

We investigated the interplay between self-associates in solution and surface templating by studying the crystallization behavior of isonicotinamide (INA) and 2,6-dihydroxybenzoic acid (DHB) in the presence of self-assembled monolayers (SAM). The end group of the SAM as well as the hydrogen-bonding capabilities of the solvent and self-association of INA and DHB were found to be important in polymorph crystallization on SAMs. In the case of INA in ethanol, both chain and dimer self-associates are present in the solution. In the absence of SAMs the polymorph form II (dimer structure) is the crystallization outcome. In ethanol the 4-mercaptopyridine and 4-mercaptobenzoic acid SAMs organize INA chain associates at the template surface and enable the crystallization of form I while the 16-mercaptohexadecanoic acid SAM results in the crystallization of form II. Raman spectroscopy suggests that molecular interactions between INA and the SAM are responsible for the formation of specific polymorphs. XRPD results in the identification of the orientation of the crystal on the surface that further verified the results obtained by Raman spectroscopy. In nitrobenzene and nitromethane INA associates in solution only as chains and crystallization results in the formation of form IV and form I, respectively (both chain forms). The crystals formed in the bulk solution and on SAMs were the same, which seems to indicate that the self-association in nitrobenzene and nitromethane is not influenced by the presence of templates. In the case of DHB in toluene and chloroform, all three SAMs nucleated only one type of polymorph (stable form 2). In the case of toluene the polymorphic outcome was stable form 2 instead of metastable form 1, which is favored in toluene in the absence of the SAMs. Again, Raman spectroscopy and XRPD suggest that DHB-SAM molecular interactions may be responsible for the formation of form 2.

Ionic liquids have been proposed as functional replacements for harmful and hazardous volatile organic solvents. However, limiting their use in this way does not fully explore the potential chemical benefits of their solvating properties, which stem from the inherent differences between ionic liquids and single molecule solvents. These differences can be used to facilitate alternative and improved reaction outcomes. This review will highlight a range of examples, involving materials preparation and organic synthesis, in which substantial progress towards the understanding and targeted application of ionic liquids is demonstrated. In addition, a number of studies will be cited where unanticipated outcomes have been observed and the relationships between these outcomes and ionic liquid structural effects will be analysed, casting new light onto these studies.

Ionic liquids have been proposed as functional replacements for harmful and hazardous volatile organic solvents. However, limiting their use in this way does not fully explore the potential chemical benefits of their solvating properties, which stem from the inherent differences between ionic liquids and single molecule solvents. These differences can be used to facilitate alternative and improved reaction outcomes. This review will highlight a range of examples, involving materials preparation and organic synthesis, in which substantial progress towards the understanding and targeted application of ionic liquids is demonstrated. In addition, a number of studies will be cited where unanticipated outcomes have been observed and the relationships between these outcomes and ionic liquid structural effects will be analysed, casting new light onto these studies.

The nucleophilic substitution of N-(p-fluorophenyldiphenylmethyl)-4-picolinium chloride was investigated using water and a range of alcoholic nucleophiles in ionic liquid solvents. The reactivity patterns across the nucleophiles examined could be attributed to steric factors, which mediated the relative nucleophilicities. Reducing the hydrogen-bond acidity of the ionic liquid cation was found to generally increase the rate of reaction, however, the magnitude of this rate effect could be influenced by the steric bulk of the nucleophile and the structural heterogeneity of the ionic liquid. Preferential solvation phenomena in binary mixtures of ionic liquids were examined and suggest that the mechanism behind the hydrogen-bond solvation phenomenon arises from direct cation-mediated, rather than indirect anion-mediated, effects.