Search

In this study, a NiCr/YSZ coating was applied to a γ-TiAl surface using multi-arc ion plating technology to enhance its high-temperature performance and explore the mechanisms of high-temperature oxidation and thermal corrosion. The thermal corrosion properties of the γ-TiAl matrix and NiCr/YSZ coating were investigated at 850 °C and 950 °C using a constant-temperature corrosion test in a 75% Na2SO4 + 25% NaCl mixture. The results indicate that after 100 h, the thermal corrosion weight gain of the coating samples was 70.1 mg/cm2 at 850 °C and 118.2 mg/cm2 at 950 °C. At these temperatures, sulfide formation on the surface increases, leading to a loose and porous surface. After 100 h of high-temperature corrosion at 850 °C, the primary oxidation product on the surface of the coating was tetragonal-ZrO2. At 950 °C, Y2O3, which mainly acts as a stabilizer in YSZ, reacted with Na2SO4, resulting in the continuous consumption of Y2O3. This reaction caused a substantial amount of tetragonal-ZrO2 to transform into monoclinic-ZrO2, altering the volume of the ceramic layer, which induced internal stress, crack propagation, and minor spallation. A continuous and dense internal thermally grown oxide (TGO) layer effectively impeded the diffusion of molten salt substances and oxygen, thereby significantly improving the thermal corrosion resistance of the thermal barrier coating. [ABSTRACT FROM AUTHOR]

Copyright of Rare Metal Materials & Engineering is the property of Northwest Institute for Nonferrous Metal Research and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Driven by the strong adsorptive and catalytic ability of metal sulfides for soluble polysulfides, it is considered as a potential mediator to resolve the problems of shuttle effect and slow reaction kinetics of polysulfides in lithium-sulfur (Li-S) batteries. However, their further development is limited by poor electrical conductivity and bad long-term durability. Herein, one type of new catalyst composed of SnS/SnS 2 heterostructures on hierarchical porous carbon (denoted as SnS/SnS 2 -HPC) by a simple hydrothermal method is reported and used as an interlayer coating on the conventional separator for blocking polysulfides. The SnS/SnS 2 -HPC integrates the advantages of a porous conductive network for promoting the transport of electrons and an enhanced electrocatalyst for accelerating polysulfides conversion. As a result, such a cell coupled with a SnS/SnS 2 -HPC interlayer exhibits a long-term lifespan of 1200 cycles. This work provides a new cell configuration by using heterostructures with a built-in electric field formed from a p-n heterojunction to improve the performance of Li-S batteries.