212 results on '"Cao, Lingfei"'
Search Results
2. Revisiting precipitates in Al-Cu-Li alloys: Experiments and first-principles calculations of thermodynamic stability of Al2CuLi(T1) precipitate
3. The combined effect of pre-aging and Mg/Si ratio on the natural aging and bake hardening in Al-Mg-Si-0.7Cu alloys
4. Precipitation evolution of Al-Zn-Mg-Cu-(Ag) alloys with a low Zn/Mg ratio
5. Study on hot deformation behavior and recrystallization mechanism of an Al-6.3Zn-2.5Mg-2.6Cu-0.11Zr alloy based on machine learning
6. Influence of the combined additions Mn, Cr or Ni on the formation of dispersoids and mechanical properties of Al–Mg–Si–Cu alloys
7. Effect of continuous retrogression and re-ageing treatment on mechanical properties, corrosion behavior and microstructure of an Al-Zn-Mg-Cu alloy
8. Aging 17-4 PH martensitic stainless steel prior to hardening: effects on martensitic transformation, microstructure and properties
9. The influence of Cu content and Mg/Si ratio on the strength and formability in Al-Mg-Si-Cu alloys
10. Multi-alloying effect of Ti, Mn, Cr, Zr, Er on the cast Al-Zn-Mg-Cu alloys
11. The effects of heat treatment on the extrusion-induced inhomogeneity of spray-formed aluminum alloy 7055
12. Synergetic effect of natural ageing and pre-stretching on the ageing behavior in Tʹ/ηʹ phase-strengthened Al-Zn-Mg-Cu alloys
13. Analysis of slip transfer behavior of tantalum during quasi in-situ compression
14. Effect of Initial Microstructure on the Hot Deformation Behavior and Microstructure Evolution of Aluminum Alloy AA2060
15. Effect of minor Sc additions on precipitation and mechanical properties of a new Al-Cu-Li alloy under T8 temper
16. Study on properties and precipitation behavior of 6000 series alloys with high Mg/Si ratios and Cu contents
17. Precipitation behavior of spray-formed aluminum alloy 7055 during high temperature aging
18. Effect of Hot Deformation and Heat Treatment on the Microstructure and Properties of Spray-Formed Al-Zn-Mg-Cu Alloys
19. Quasi in-situ study on the slip activation mechanism of high purity tantalum during compress deformation
20. Achieving ultra-high strength of Al-Cu-Li alloys by the combination of high pressure torsion and age-hardening
21. The effect of pre-ageing/stretching on the ageing-hardening behavior of Al–Zn–Mg–Cu alloys correlated with Zn/Mg ratio
22. Simulation of dynamic recrystallization in an Al-Mg-Si alloy during inhomogeneous hot deformation
23. Investigation on microstructure and mechanical properties of Al-Zn-Mg-Cu alloys with various Zn/Mg ratios
24. Hot deformation and dynamic recrystallization in Al-Mg-Si alloy
25. Effect of Ag on aging precipitation behavior and mechanical properties of aluminum alloy 7075
26. Effect of the natural aging time on the age-hardening response and precipitation behavior of the Al-0.4Mg-1.0Si-(Sn) alloy
27. Co-precipitation of T′ and η′ phase in Al-Zn-Mg-Cu alloys
28. Effect of quenching rate on strengthening behavior of an Al-Zn-Mg-Cu alloy during natural ageing
29. Effect of trace Er on the microstructure and properties of Al–Zn–Mg–Cu–Zr alloys during heat treatments
30. Effect of retrogression treatments on microstructure, hardness and corrosion behaviors of aluminum alloy 7085
31. Nanostructural Sc-based hierarchy to improve the creep resistance of Al–Cu alloys
32. Temporal Context in Serial Order of Short-Term Memory
33. What Can Parents Do with Cyberbullying Among Adolescents?
34. Unusual secondary precipitation within the primary precipitation free zone substantially enhances the ductility of Al–Zn–Mg–Cu alloy
35. Influence of Sn on the precipitation and hardening response of natural aged Al-0.4Mg-1.0Si alloy artificial aged at different temperatures
36. The microstructural evolution of aluminum alloy 7055 manufactured by hot thermo-mechanical process
37. The microstructure and tensile properties of W/Ti multilayer composites prepared by spark plasma sintering
38. Quantifying the grain boundary segregation strengthening induced by post-ECAP aging in an Al-5Cu alloy
39. Quantitative analysis: How annealing temperature influences recrystallization texture and grain shape in tantalum
40. The structural and compositional evolution of precipitates in Al-Mg-Si-Cu alloy
41. Strain accommodation of <110>-normal direction-oriented grains in micro-shear bands of high-purity tantalum
42. Investigation on formation mechanism of T1 precipitate in an Al-Cu-Li alloy
43. Tailoring the microstructure and mechanical properties of the final Al-Mn foils by different intermediate annealing process
44. Utilisation of Atom Probe Data to Model Precipitation and Strengthening in an Al-Mg-Si-Cu Alloy During Natural Ageing and Early-Stage Artificial Ageing
45. Influence of pre-ageing on the stretch formability of Al-Mg-Si automotive sheet alloys
46. Crystallographic analysis of nucleation for random orientations in high-purity tantalum
47. Stabilizing defective coherent twin boundaries for strong and stable nanocrystalline nanotwinned Cu
48. The Effect of Thermomechanical Processing Sequence on the Dispersoid Distribution and Final Mechanical Properties of Spray-Formed Al-Cu-Li Alloy
49. The influence of Mg/Si ratio and Cu content on the stretch formability of 6xxx aluminium alloys
50. Effect of Two-Stage Homogenization Heat Treatment on Microstructure and Mechanical Properties of AA2060 Alloy
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.