Search

Rapid Ohia Death is a major concern for the viability of ohia (Metrosideros polymorpha) in Hawaii and has led to restrictions on log movement. The potential for using disodium octaborate tetrahydrate (DOT) and didecyl dimethyl ammonium chloride (DDAC) dip diffusion treatments to control the two causal fungi (Ceratocyslis lukuohia and Ceratocystis huliohia) was investigated. A 10 percent boric acid equivalent dip diffusion treatment killed the pathogens in 0.5-cm-thick disks obtained from 4.0- to 5.0-cm-diameter limbs of naturally colonized trees. DOT tended to diffuse more consistently in 50- to 60-cm-long bolts of small (4.0 to 9.0 cm) and large (9.1 to 17.0 cm) diameter healthy ohia compared with those bolts naturally infected by C. lukuohia. Diffusion periods longer than 6 weeks resulted in deeper penetration. Immersion (24 h) of logs (1.3 m long; 9 to 17 cm diameter) from C. lukuohia artificially inoculated trees in two forest locations in a 15 percent DOT/1 percent DDAC solution and storage for 10 weeks before evaluation resulted in incomplete elimination of the pathogen and lower boron concentrations in the inner sapwood than outer. Further investigations are needed to explore using either higher boron concentrations or longer diffusion periods to deliver fungicidal concentrations of boron deeper within the wood matrix., The Hawaiian keystone tree ohia (Metrosideros polymorpha Gaudich.) is under attack by two newly discovered fungal pathogens, Ceratocystis lukuohia I. Barnes, T.C. Harrin, and L.M. Keith and Ceratocystis huliohia I. [...]

Copper remains one of the key biocides for protecting timber in soil contact. Historically, copper-based preservatives relied on solubilized copper. Over the past decade, micronized copper systems have largely replaced soluble copper systems in this application. While micronized copper chemistries have been shown to perform well over time with reduced copper leaching compared to solubilized copper, data are lacking on the effects of repeated leaching cycles on resistance of the timber to fungal attack. The potential effects of repeated leaching cycles of micronized copper azole--treated southern pine (Pinus spp.) blocks on both copper losses and resistance to fungal attack were explored over 20 leaching cycles using Gloeophyllum trabeum and Rhodonia placenta as test fungi. Copper losses during leaching were elevated for the first two cycles and steadily declined with additional cycling. There were no noticeable differences in fungal-associated weight losses in blocks exposed to G. trabeum. There was only a slight increase in average block weight losses with R. placenta, although blocks exposed to this fungus experienced higher weight losses with increased leaching cycles. The results suggest that repeated leaching exposures may produce some localized increases in susceptibility to fungal attack, but the overall effects were minor., Chopper remains among the most widely used components for wood preservatives employed in ground contact. Copper reacts slightly with the wood and has broad spectrum activity against fungi and insects [...]

Internal decay is a common problem in poles or timbers of thin sapwood species. Several internal treatments have been developed to arrest this attack, and these systems are widely used in North America. Although these treatments have been evaluated in numerous independent field trials, there is no single test of all treatments. The objective of this study was to assess the chemical distribution and fungal colonization in Douglas-fir poles treated with each of 13 different internal remedial treatments over a 10-year period. Metam sodium treatments provided the shortest protective period, with little evidence of residual chemical 3 years after treatment. Methylisothiocyanate (MITC) in pure form provided a very high initial flush of active ingredient and a longer protective period extending from 5 to 8 years after treatment. Dazomet, which must decompose to produce MITC, took slightly longer to reach effective levels, but was still present at effective levels 10 years after treatment. Chloropicrin, which has strong interactions with wood, was associated with the highest chemical levels after 10 years. Borates took longer to reach effective levels in the poles and their protective zone was narrower than the fumigants, but boron was still present at effective levels 10 years after application. The results illustrate the different properties provided by each treatment, but also show that all tested remedial treatments were effective within certain limitations., Pressure treatment of large timbers and poles of thin sapwood species generally produces a shallow shell of protection surrounding the untreated heartwood core (Graham 1983). The treatment remains protective if [...]

Phytophthora ramorum is an increasingly important tree pathogen in northern California and southern Oregon. While it has the greatest effect on tanoak, it can infect a wide range of tree species, including Douglas-fir. Oregon has instituted a quarantine area to slow the spread of this pathogen, and there are concerns that further restrictions may be imposed on log movement, including those of Douglas-fir. The potential for using boron as a log treatment to limit P. ramorum was evaluated. While boron either alone or in a glycol solution was capable of moving into the bark, there was no evidence that it could move further into the sapwood. The results suggest that bark removal would be necessary for the use of boron as a mitigation agent for the spread of P. ramorum., The global movement of plant materials carries with it the risk of unintended transportation of potential plant pathogens (Morrell 1995; Pimentel et al. 2000; Food and Agriculture Organization of the [...]