Search

We present version 3 (V3) of the Cloud_cci Along-Track Scanning Radiometer (ATSR) and Advanced ATSR (AATSR) data set. The data set was created for the European Space Agency (ESA) Cloud_cci (Climate Change Initiative) programme. The cloud properties were retrieved from the second ATSR (ATSR-2) on board the second European Remote Sensing Satellite (ERS-2) spanning 1995–2003 and the AATSR on board Envisat, which spanned 2002–2012. The data are comprised of a comprehensive set of cloud properties: cloud top height, temperature, pressure, spectral albedo, cloud effective emissivity, effective radius, and optical thickness, alongside derived liquid and ice water path. Each retrieval is provided with its associated uncertainty. The cloud property retrievals are accompanied by high-resolution top- and bottom-of-atmosphere shortwave and longwave fluxes that have been derived from the retrieved cloud properties using a radiative transfer model. The fluxes were generated for all-sky and clear-sky conditions. V3 differs from the previous version 2 (V2) through development of the retrieval algorithm and attention to the consistency between the ATSR-2 and AATSR instruments. The cloud properties show improved accuracy in validation and better consistency between the two instruments, as demonstrated by a comparison of cloud mask and cloud height with co-located CALIPSO data. The cloud masking has improved significantly, particularly in its ability to detect clear pixels. The Kuiper Skill score has increased from 0.49 to 0.66. The cloud top height accuracy is relatively unchanged. The AATSR liquid water path was compared with the Multisensor Advanced Climatology of Liquid Water Path (MAC-LWP) in regions of stratocumulus cloud and shown to have very good agreement and improved consistency between ATSR-2 and AATSR instruments. The correlation with MAC-LWP increased from 0.4 to over 0.8 for these cloud regions. The flux products are compared with NASA Clouds and the Earth's Radiant Energy System (CERES) data, showing good agreement within the uncertainty. The new data set is well suited to a wide range of climate applications, such as comparison with climate models, investigation of trends in cloud properties, understanding aerosol–cloud interactions, and providing contextual information for co-located ATSR-2/AATSR surface temperature and aerosol products.

OBJECTIVE: To evaluate the effect of fetal sex on singleton pregnancy growth charts customized for parental characteristics, race, and parity Methods: In a multicentric cross-sectional study, 8070 ultrasonographic examinations from low-risk singleton pregnancies between 16 and 40 weeks of gestation were considered. The fetal measurements obtained were biparietal diameter (BPD), head circumference (HC), abdominal circumference (AC), and femur length (FL). Quantile regression was used to examine the impact of fetal sex across the biometric percentiles of the fetal measurements considered together with parents' height, weight, parity, and race. RESULTS: Fetal gender resulted to be a significant covariate for BDP, HC, and AC with higher values for male fetuses (p ≤ 0.0009). Minimal differences were found among sexes for FL. Parity, maternal race, paternal height and maternal height, and weight resulted significantly related to the fetal biometric parameters considered independently from fetal gender. CONCLUSION: In this study, we constructed customized biometric growth charts for fetal sex, parental, and obstetrical characteristics using quantile regression. The use of gender-specific charts offers the advantage to define individualized normal ranges of fetal biometric parameters at each specific centile. This approach may improve the antenatal identification of abnormal fetal growth.

Ash clouds are a geographically far-reaching hazard associated with volcanic eruptions. To minimise the risk that these pose to aircraft and to limit disruption to the aviation industry, it is important to closely monitor the emission and atmospheric dispersion of these plumes. The altitude of the plume is an important consideration and is an essential input into many models of ash cloud propagation. CO2 slicing is an established technique for obtaining the top height of aqueous clouds, and previous studies have demonstrated that there is potential for this method to be used for volcanic ash. In this study, the CO2 slicing technique has been adapted for volcanic ash and applied to spectra obtained from the Infrared Atmospheric Sounding Interferometer (IASI). Simulated ash spectra are first used to select the most appropriate channels and then demonstrate that the technique has merit for determining the altitude of the ash. These results indicate a strong match between the true heights and CO2 slicing output with a root mean square error (RMSE) of less than 800 m. Following this, the technique was applied to spectra obtained with IASI during the Eyjafjallajökull and Grímsvötn eruptions in 2010 and 2011 respectively, both of which emitted ash clouds into the troposphere, and which have been extensively studied with satellite imagery. The CO2 slicing results were compared against those from an optimal estimation scheme, also developed for IASI, and a satellite-borne lidar is used for validation. The CO2 slicing heights returned an RMSE value of 2.2 km when compared against the lidar. This is lower than the RMSE for the optimal estimation scheme (2.8 km). The CO2 slicing technique is a relatively fast tool and the results suggest that this method could be used to get a first approximation of the ash cloud height, potentially for use for hazard mitigation, or as an input for other retrieval techniques or models of ash cloud propagation.

The 6-month-long 2014–2015 Holuhraun eruption was the largest in Iceland for 200 years, emitting huge quantities of sulfur dioxide (SO2) into the troposphere, at times overwhelming European anthropogenic emissions. Weather, terrain and latitude made continuous ground-based or UV satellite sensor measurements challenging. Infrared Atmospheric Sounding Interferometer (IASI) data are used to derive the first time series of daily SO2 mass present in the atmosphere and its vertical distribution over the entire eruption period. A new optimal estimation scheme is used to calculate daily SO2 fluxes and average e-folding time every 12 h. For the 6 months studied, the SO2 flux was observed to be up to 200 kt day−1 and the minimum total SO2 erupted mass was 4.4±0.8 Tg. The average SO2 e-folding time was 2.4±0.6 days. Where comparisons are possible, these results broadly agree with ground-based near-source measurements, independent remote-sensing data and values obtained from model simulations from a previous paper. The results highlight the importance of using high-resolution time series data to accurately estimate volcanic SO2 emissions. The SO2 mass missed due to thermal contrast is estimated to be of the order of 3 % of the total emission when compared to measurements by the Ozone Monitoring Instrument. A statistical correction for cloud based on the AVHRR cloud-CCI data set suggested that the SO2 mass missed due to cloud cover could be significant, up to a factor of 2 for the plume within the first kilometre from the vent. Applying this correction results in a total erupted mass of 6.7±0.4 Tg and little change in average e-folding time. The data set derived can be used for comparisons to other ground- and satellite-based measurements and to petrological estimates of the SO2 flux. It could also be used to initialise climate model simulations, helping to better quantify the environmental and climatic impacts of future Icelandic fissure eruptions and simulations of past large-scale flood lava eruptions.

Sulfur dioxide (SO2) is an important atmospheric constituent that plays a crucial role in many atmospheric processes. Volcanic eruptions are a significant source of atmospheric SO2 and its effects and lifetime depend on the SO2 injection altitude. The Infrared Atmospheric Sounding Interferometer (IASI) on the METOP satellite can be used to study volcanic emission of SO2 using high-spectral resolution measurements from 1000 to 1200 and from 1300 to 1410 cm−1 (the 7.3 and 8.7 µm SO2 bands) returning both SO2 amount and altitude data. The scheme described in Carboni et al. (2012) has been applied to measure volcanic SO2 amount and altitude for 14 explosive eruptions from 2008 to 2012. The work includes a comparison with the following independent measurements: (i) the SO2 column amounts from the 2010 Eyjafjallajökull plumes have been compared with Brewer ground measurements over Europe; (ii) the SO2 plumes heights, for the 2010 Eyjafjallajökull and 2011 Grimsvötn eruptions, have been compared with CALIPSO backscatter profiles. The results of the comparisons show that IASI SO2 measurements are not affected by underlying cloud and are consistent (within the retrieved errors) with the other measurements. The series of analysed eruptions (2008 to 2012) show that the biggest emitter of volcanic SO2 was Nabro, followed by Kasatochi and Grímsvötn. Our observations also show a tendency for volcanic SO2 to reach the level of the tropopause during many of the moderately explosive eruptions observed. For the eruptions observed, this tendency was independent of the maximum amount of SO2 (e.g. 0.2 Tg for Dalafilla compared with 1.6 Tg for Nabro) and of the volcanic explosive index (between 3 and 5).

This study focuses on two new aspects of inverse modelling of volcanic emissions. First, we derive an observation operator for satellite retrievals of plume height, and second, we solve the inverse problem using an algorithm based on the 4D-Var data assimilation method. The approach is first tested in a twin experiment with simulated observations and further evaluated by assimilating IASI SO2plume height and total column retrievals in a source term inversion for the 2010 eruption of Eyjafjallajökull. The inversion resulted in temporal and vertical reconstruction of the SO2emissions during 1–20May2010 with formal vertical and temporal resolutions of 500 m and 12 h.The plume height observation operator is based on simultaneous assimilation of the plume height and total column retrievals. The plume height is taken to represent the vertical centre of mass, which is transformed into the first moment of mass (centre of mass times total mass). This makes the observation operator linear and simple to implement. The necessary modifications to the observation error covariance matrix are derived.Regularization by truncated iteration is investigated as a simple and efficient regularization method for the 4D-Var-based inversion. In the twin experiments, the truncated iteration was found to perform similarly to the commonly used Tikhonov regularization, which in turn is equivalent to a Gaussian a priori source term. However, the truncated iteration allows the level of regularization to be determined a posteriori without repeating the inversion.In the twin experiments, assimilating the plume height retrievals resulted in a 5–20 % improvement in root mean squared error but simultaneously introduced a 10–20 % low bias on the total emission depending on assumed emission profile. The results are consistent with those obtained with real data. For Eyjafjallajökull, comparisons with observations showed that assimilating the plume height retrievals reduced the overestimation of injection height during individual periods of 1–3days, but for most of the simulated 20days, the injection height was constrained by meteorological conditions, and assimilation of the plume height retrievals had only small impact. The a posteriori source term for Eyjafjallajökull consisted of 0.29 Tg (with total column and plume height retrievals) or 0.33 Tg (with total column retrievals only) erupted SO2of which 95 % was injected below 11 or 12 km, respectively.

OBJECTIVES: The purpose of this study was to construct fetal biometric charts between 16 and 40 weeks' gestation that were customized for parental characteristics, race, and parity, using quantile regression analysis. METHODS: In a multicenter cross-sectional study, 8070 sonographic examinations from low-risk pregnancies between 16 and 40 weeks' gestation were analyzed. The fetal measurements obtained were biparietal diameter, head circumference, abdominal circumference, and femur diaphysis length. Quantile regression was used to examine the impact of parental height and weight, parity, and race across biometric percentiles for the fetal measurements considered. RESULTS: Paternal and maternal height were significant covariates for all of the measurements considered (P < .05). Maternal weight significantly influenced head circumference, abdominal circumference, and femur diaphysis length. Parity was significantly associated with biparietal diameter and head circumference. Central African race was associated with head circumference and femur diaphysis length, whereas North African race was only associated with femur diaphysis length. CONCLUSIONS: In this study we constructed customized biometric growth charts using quantile regression in a large cohort of low-risk pregnancies. These charts offer the advantage of defining individualized normal ranges of fetal biometric parameters at each specific percentile corrected for parental height and weight, parity, and race. This study supports the importance of including these variables in routine sonographic screening for fetal growth abnormalities.

Airborne volcanic ash poses a significant danger to aircraft, but is difficult to quantify accurately using satellite data, while sulphur dioxide is much easier to detect accurately, but is much less of a direct hazard to aviation. This paper investigates the reliability of using SO2 as a proxy for the location of volcanic ash, using an SO2 retrieval from the Infrared Atmospheric Sounding Interferometer (IASI) and ash detections from IASI and the Advanced Along Track Scanning Radiometer (AATSR). Using a numerical "missed ash fraction" applied to the eruptions of Eyjafjallajökull in 2010 and Puyehue-Cordõn Caulle in 2011 reveals that the SO2 flag typically misses ∼30% of the detectable ash. Furthermore, the missed ash fraction is found to be highly variable, both between the two eruptions and over the course of each eruption, with values of over 80% found on some days. The detection threshold of the AATSR ash flag is also investigated using radiative transfer calculations, allowing the threshold of the IASI flag to be inferred, and these are related to the ash contamination levels. © 2013. American Geophysical Union. All Rights Reserved.

The explosive phase of the eruption of the Eyjafjallajkull volcano in Iceland beginning on 14 April 2010 caused extensive disruption to aviation in Europe with serious social and economic consequences. Despite its impact, the explosive phase was modest in size and the amount of sulphur dioxide (SO 2) released was low. The potential of hyperspectral thermal infrared measurements to discriminate emissions from similar events by measuring SO 2 is examined using the Infrared Atmospheric Sounding Interferometer (IASI) on board MetOp-A. The transported plume in the initial stages of the explosive phase contained low amounts of SO2 at low altitude which placed it at the detection limit of space-based sensors used to monitor the volcanic threat to aviation using current methods. A recently developed technique for the fast retrieval of SO2 from IASI is applied in the context of the Eyjafjallajkull eruption to show that IASI is easily capable of sensing the SO2 in the plume at this stage where existing methods fail. The fast SO2 retrieval is calibrated against a fully quantitative optimal estimation retrieval of SO2 total column amount and plume altitude to derive the detection limit for the plume on 15 April 2010. An estimate of the general detection limit for the instrument is placed conservatively at 0.3 Dobson Units (DU) which is an order of magnitude lower than previously thought. Copyright 2012 by the American Geophysical Union.