Search

Background: Concerns over the presence of the diketones 2,4 butanedione (DA) and 2,3 pentanedione (AP) in e-cigarettes arise from their potential to cause respiratory diseases. Their presence in e-liquids is a primary source, but they may potentially be generated by glycerol (VG) and propylene glycol (PG) when heated to produce aerosols. Factors leading to the presence of AP, DA and acetoin (AC) in e-cigarette aerosols were investigated. We quantified direct transfer from e-liquids, examined thermal degradation of major e-liquid constituents VG, PG and 1,3 propanediol (1,3 PD) and the potential for AC, AP and DA production from sugars and flavor additives when heated in e-cigarettes.Method: Transfers of AC, AP and DA from e-liquids to e-cigarette aerosols were quantified by comparing aerosol concentrations to e-liquid concentrations. Thermal generation from VG, PG or 1,3 PD e-liquids was investigated by measuring AC, AP and DA emissions as a function of temperature in an e-cigarette. Thermal generation of AC, AP and DA from sugars was examined by aerosolising e-liquids containing sucrose, fructose or glucose in an e-cigarette. Pyrolytic formation of AP and DA from a range of common flavors was assessed using flash pyrolysis techniques.Results: AC transfer efficiency was >90%, while AP and DA were transferred less efficiently (65%) indicating losses during aerosolisation. Quantifiable levels of DA were generated from VG and PG, and to a lesser extent 1,3 PD at coil temperatures >300°C. Above 350°C AP was generated from VG and 1,3 PD but not PG. AC was not generated from major constituents, although low levels were generated by thermal reduction of DA. Aerosols from e-liquids containing sucrose contained quantifiable (>6 ng/puff) levels of DA at all sucrose concentrations tested, with DA emissions increasing with increasing device power and concentration. 1% glucose, fructose or sucrose e-liquids gave comparable DA emissions. Furanose ring compounds also generate DA and AP when heated to 250°C.Conclusions: In addition to less than quantitative direct transfer from the e-liquid, DA and AP can be present in the e-cigarette aerosol due to thermal decomposition reactions of glycols, sugars and furanonse ring flavors under e-cigarette operating conditions.

Use of the e-liquid flavourings diacetyl and acetyl propionyl has raised concerns that they might cause respiratory diseases amongst vapers. Product surveys show that these compounds, plus a less toxic alternative, acetoin, are widely used in e-liquids. We have investigated the chemistry of acetoin, acetyl propionyl and diacetyl in e-liquids. They are reactive, with concentrations falling substantially over time. Acetyl propionyl is the most reactive, diacetyl less so, and acetoin significantly more stable. Their reactivity is pH-enhanced when nicotine is present in the e-liquid. Of major concern, we found that acetoin generates diacetyl in e-liquids. We found diacetyl formation in all acetoin-containing e-liquids, but it is not an acetoin-contaminant. Diacetyl concentrations were proportional to acetoin content, grew over time, and formation was accelerated by nicotine. E-liquids stored for up to 18 months contained significant diacetyl, and reduced acetoin levels, showing that acetoin is a long-term diacetyl source. Other reaction pathways operate, and we advance mechanisms to explain this area of e-liquid chemistry. Acetoin use in e-liquids is an inevitable source of diacetyl exposure for e-cigarette users. Acetoin, acetyl propionyl and diacetyl are avoidable hazards for vapers, and we recommend e-liquid manufacturers move away from their use in e-liquid formulations.

Background We are interested in comparing the levels of harmful or potentially harmful constituents in Swedish and American smokeless tobacco products (STPs). We report here the concentrations of the IARC Group 2 A (probable human) carcinogen ethyl carbamate (EC) in seventy commercial STPs from the US and Sweden, representing 80–90% of the market share of the major STP categories in these countries. We also examine the effects of various additives, processing and storage conditions on EC concentrations in experimental snus samples. Results EC was determined from aqueous extracts of the STPs using ultra performance liquid chromatography tandem mass spectrometry (UPLC/MS/MS). EC was undetectable (

Les dépôts sur les voies respiratoires laissés par les articles de tabac sont conditionnés par les propriétés des particules ou des gouttelettes (telles que le diamètre), les paramètres des bouffées (tels que l’effort de tirage ou la perte de charge, la vitesse de filtration, la durée), les pertes en bouche et la dynamique d’inhalation post-bouffée (déterminée par la profondeur d’inhalation, le volume d’inhalation et la durée de l’apnée). Le système de comportement tabagique (SBS) décrit dans le présent article est un système inédit en raison de sa capacité à mesurer les caractéristiques de filtration et de durée de cycles tabagiques typiques, qui peuvent se composer d’une bouffée, une retenue intrabuccale, une inhalation post-bouffée, une apnée et une expiration. Le présent système combine deux analyseurs : Le premier mesure la topographie des bouffées et l’obscurcissement optique causé par l’aérosol ingéré par bouffée tandis que le second mesure la topographie respiratoire et l’obscurcissement optique causé par l’aérosol expiré. Les analyseurs de respiration et de bouffée furent calibrés et utilisés à des vitesses de filtration oscillant respectivement entre 0-7 L.min-1 et 0-50 L.min-1 et similaires à celles typiquement observées durant le cycle tabagique humain. Les volumes mesurés par les analyseurs de respiration et de bouffée furent conformes aux spécifications de conception et aux seuils de tolérance fixés respectivement à ± 2% et ± 5%. Les mesures de l’obscurcissement optique ne révélèrent ni différence statistique entre les trois unités testées ni variation au jour le jour, confirmant la fiabilité du SBS pour les mesures optiques de la fumée lorsqu'il est combiné avec des mesures topographiques. En conclusion, le SBS est une technologie validée qui propose un outil capable de mesurer le profil de durée et de vitesse de filtration en temps réel de la topographie de la bouffée, de la retenue intrabuccale, de l’inhalation post-bouffée, de l’apnée et de l’expiration et donc de faire une capture du cycle tabagique complet à une résolution de 25 Hz. Par ailleurs, le SBS se distingue des outils traditionnels de profilage de la respiration et de la bouffée en apportant des mesures en temps réel de l’obscurcissement optique lors de la bouffée et de l’expiration de l’aérosol et donc une quantification indirecte du goudron contenu dans la fumée de cigarette inhalée en bouffée et de la fumée expirée. [Beitr. Tabakforsch. Int. 26 (2015) 219-231]

The recent growth in e-cigarette use has presented many challenges to Public Health research, including understanding the potential for e-cigarettes to generate toxic aerosol constituents during use. Recent research has established that the way e-cigarettes are puffed influences the magnitude of emissions from these devices, with puff duration the dominant driving force. Standardised puffing machine methods are being developed to harmonise testing approaches across laboratories, but critical to their success is the degree with which they accurately reflect vapers real-world puffing behaviours (topography). Relatively limited data is available examining the way vapers puff, with significant inconsistencies between studies. Here we report the creation and analysis of a large database of public-domain vaping videos to establish e-cigarettes puffing behaviour in near natural settings. Over 300 videos containing 1200 puffing events from 252 vapers were obtained from social media sources, divided approximately equally amongst cigalike, Ego and Advanced Personal Vapouriser (“APV”, also referred to as “boxmod”) types of e-cigarettes. Analysis showed that similar mean puff durations were found for all three categories of vaping devices. This includes direct-to-lung as well as mouth-to-lung puffing behaviours. A 3 s puff duration, as used in the recently published ISO puffing standard ISO 20,768:2018, appears appropriate for average behaviours. However, the wide diversity of puffing durations observed amongst vapers means it may be challenging to identify a simple yet comprehensively representative single machine-puffing regimen for laboratory studies. A puff duration of around 5.6 s appears to represent 95th percentile puffing behaviours amongst vapers and may be an appropriate choice for scientists and regulators seeking an additional more intense puffing regime. A range of new behavioural patterns have been identified whose impact on aerosol exposure need to be considered. Public-domain video records of vapers provides valuable and accessible insights into real-world use behaviours. It is freely available, and constantly updated with new material, and therefore provides a valuable resource for scientists seeking to understand real-world vaping behaviours.

The UV absorption and electronic circular dichroism (ECD) spectra of (R)- and (S)-nicotine and (S)-nornicotine in aqueous solution were measured to a significantly lower wavelength range than previously reported, allowing the identification of four previously unobserved electronic transitions. The ECD spectra of the two enantiomers of nicotine were equal in magnitude and opposite in sign, while the UV absorption spectra were coincidental. In line with previous observations, (S)-nicotine exhibited a negative cotton effect centered on 263 nm with vibronic structure (π–π1* transition) and a broad, positive ECD signal at around 240 nm associated with the n–π1* transition. As expected this band disappeared when the pyridyl aromatic moiety was protonated. Four further electronic transitions are reported between 215 and 180 nm; it is proposed the negative maxima around 206 nm is either an n–σ* transition or a charge transfer band resulting from the movement of charge from the pyrrolidyl N lone pair to the pyridyl π* orbital. The pyridyl π–π2* transition may be contained within the negative ECD signal envelope at around 200 nm. Another negative maximum at 188 nm is thought to be the pyridyl π–π3* transition, while the lowest wavelength end-absorption and positive ECD may be associated with the π–π4* transition. The UV absorption spectra of (S)-nornicotine was similar to that of (S)-nicotine in the range 280–220 nm and acidification of the aqueous solution enhanced the absorption. The ECD signals of (S)-nornicotine were considerably less intense compared to (S)-nicotine and declined further on acidification; in the far UV region the ECD spectra diverge considerably. Chirality 25:288–293, 2013. © 2013 Wiley Periodicals, Inc.

With the rapidly rising popularity and substantial evolution of electronic cigarettes (e-cigarettes) in the past 5–6 years, how these devices are used by vapers and consumers’ exposure to aerosol emissions need to be understood. We used puffing topography to measure directly product use. We adapted a cigarette puffing topography device for use with e-cigarettes. We performed validation using air and e-cigarette aerosol under multiple regimes. Consumer puffing topography was measured for 60 vapers provided with rechargeable “cig-a-like” or larger button-activated e-cigarettes, to use ad-libitum in two sessions. Under all regimes, air puff volumes were within 1 mL of the target and aerosol volumes within 5 mL for all device types, serving to validate the device. Vapers’ mean puff durations (2.0 s and 2.2 s) were similar with both types of e-cigarette, but mean puff volumes (52.2 mL and 83.0 mL) and mean inter-puff intervals (23.2 s and 29.3 s) differed significantly. The differing data show that product characteristics influence puffing topography and, therefore, the results obtained from a given e-cigarette might not read across to other products. Understanding the factors that affect puffing topography will be important for standardising testing protocols for e-cigarette emissions.

Background There is considerable interest from a regulatory and public health perspective in harmful and potentially harmful constituents in tobacco products, including smokeless tobacco products (STPs). A wide range of commercial STPs from the US and Sweden, representing 80–90 % of the 2010 market share for all the major STP categories in these two countries, were analysed for the IARC Group 2A carcinogen acrylamide. These STPs comprised the following styles: Swedish loose and portion snus, US snus, chewing tobacco, moist snuff, dry snuff, soft pellet, hard pellet and plug. Results Acrylamide was detected in all the products tested and quantified in all but one product. Concentrations ranged from 62 to 666 ng/g wet weight basis (WWB). The average levels of acrylamide (WWB) by type of STP were not significantly different (p > 0.05) except for US snus which had, on average, greater levels but with a very wide range of individual levels according to the manufacturer. Acrylamide levels in STPs were significantly and positively correlated with pH, but not with levels of either reducing sugars or ammonia nitrogen. Levels of acrylamide increased by sixfold or more (on a dry weight basis) during manufacture of a snus sample and then decreased during subsequent storage for up to 22 weeks. Acrylamide generation in tobacco generally appears to occur at lower temperatures, but longer time scales than found with food production. Conclusions Acrylamide is a common contaminant of STPs, formed through heat treatment of tobacco. Our data show that exposure to acrylamide from consumption of STPs is small compared with exposure from food consumption or cigarette smoking. Electronic supplementary material The online version of this article (doi:10.1186/s13065-015-0132-1) contains supplementary material, which is available to authorized users.

Background Due to the lower health risks associated with the use of certain categories of smokeless tobacco products (STPs) such as Swedish snus, there is interest in the comparative levels of toxic chemical constituents in different types of STPs. A method has been developed and validated for the analysis of hydrazine in STPs. Seventy four commercial STPs from the US and Sweden, representing 80-90% of the 2010 market share for all the major STP categories in these two countries, as well as three reference STPs, were analysed for hydrazine. Results Aqueous extracts of the STPs were treated with excess pentafluorobenzaldehyde (PFB), which reacted with hydrazine in solution to form decafluorobenzaldehyde azine (DFBA). DFBA was partitioned into hexane and then quantified by gas chromatography–mass spectrometry (GC–MS). The method was validated using five different types of STP, was linear in the range 8–170 ng/mL, and had limits of quantification (LOQ) from 26–53 ng of hydrazine per g of STP (as sold). The method was applied to the analysis of 74 contemporary STPs commercially available in the United States and Sweden, none of which were found to contain hydrazine above the LOQ or LOD. Trace levels of compounds showing chromatographic and mass spectral features consistent with hydrazine were identified at very low levels (sub-limit of detection