Search

This work reports the thermal and electron beam stabilities of a series of isostructural metal–organic frameworks (MOFs) of type MFM-300(M) (M = Al, Ga, In, Cr). MFM-300(Cr) was most stable under the electron beam, having an unusually high critical electron fluence of 1111 e− Å−2 while the Group 13 element MOFs were found to be less stable. Within Group 13, MFM-300(Al) had the highest critical electron fluence of 330 e− Å−2, compared to 189 e− Å−2 and 147 e− Å−2 for the Ga and In MOFs, respectively. For all four MOFs, electron beam-induced structural degradation was independent of crystal size and was highly anisotropic, although both the length and width of the channels decreased during electron beam irradiation. Notably, MFM-300(Cr) was found to retain crystallinity while shrinking up to 10%. Thermal stability was studied using in situ synchrotron X-ray diffraction at elevated temperature, which revealed critical temperatures for crystal degradation to be 605, 570, 490 and 480 °C for Al, Cr, Ga, and In, respectively. The pore channel diameters contracted by ≈0.5% on desorption of solvent species, but thermal degradation at higher temperatures was isotropic. The observed electron stabilities were found to scale with the relative inertness of the cations and correlate well to the measured lifetime of the materials when used as photocatalysts. [ABSTRACT FROM AUTHOR]

We investigate the low-energy transitions (0-570 cm-1) of the S1 state of para-fluorotoluene (pFT) using a combination of resonance-enhanced multiphoton ionization and zero-kinetic-energy (ZEKE) spectroscopy and quantum chemical calculations. By using various S1 states as intermediate levels, we obtain ZEKE spectra. The differing activity observed allows detailed assignments to be made of both the cation and S1 low-energy levels. The assignments are in line with the recently published work on toluene from the Lawrance group [J. R. Gascooke et al., J. Chem. Phys. 143, 044313 (2015)], which considered vibration-torsion coupling in depth for the S1 state of toluene. In addition, we investigate whether two bands that occur in the range 390-420 cm-1 are the result of a Fermi resonance; we present evidence for weak coupling between various vibrations and torsions that contribute to this region. This work has led to the identification of a number of misassignments in the literature, and these are corrected. [ABSTRACT FROM AUTHOR]

Selective oxidation of benzylic C-H compounds to ketones is important for the production of a wide range of fine chemicals, and is often achieved using toxic or precious metal catalysts. Herein, we report the efficient oxidation of benzylic C-H groups in a broad range of substrates under mild conditions over a robust metal-organic framework material, MFM-170, incorporating redox-active [Cu 2 II (O 2 CR) 4 ] paddlewheel nodes. A comprehensive investigation employing electron paramagnetic resonance (EPR) spectroscopy and synchrotron X-ray diffraction has identified the critical role of the paddlewheel moiety in activating the oxidant t BuOOH (tert-butyl hydroperoxide) via partial reduction to [Cu II Cu I (O 2 CR) 4 ] species., (© 2021 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

We investigate the low-energy transitions (0-570 cm -1 ) of the S 1 state of para-fluorotoluene (pFT) using a combination of resonance-enhanced multiphoton ionization and zero-kinetic-energy (ZEKE) spectroscopy and quantum chemical calculations. By using various S 1 states as intermediate levels, we obtain ZEKE spectra. The differing activity observed allows detailed assignments to be made of both the cation and S 1 low-energy levels. The assignments are in line with the recently published work on toluene from the Lawrance group [J. R. Gascooke et al., J. Chem. Phys. 143, 044313 (2015)], which considered vibration-torsion coupling in depth for the S 1 state of toluene. In addition, we investigate whether two bands that occur in the range 390-420 cm -1 are the result of a Fermi resonance; we present evidence for weak coupling between various vibrations and torsions that contribute to this region. This work has led to the identification of a number of misassignments in the literature, and these are corrected.

The key requirement for a portable store of natural gas is to maximize the amount of gas within the smallest possible space. The packing of methane (CH4) in a given storage medium at the highest possible density is, therefore, a highly desirable but challenging target. We report a microporous hydroxyl-decorated material, MFM-300(In) (MFM = Manchester Framework Material, replacing the NOTT designation), which displays a high volumetric uptake of 202 v/v at 298 K and 35 bar for CH4 and 488 v/v at 77 K and 20 bar for H2. Direct observation and quantification of the location, binding, and rotational modes of adsorbed CH4 and H2 molecules within this host have been achieved, using neutron diffraction and inelastic neutron scattering experiments, coupled with density functional theory (DFT) modeling. These complementary techniques reveal a very efficient packing of H2 and CH4 molecules within MFM-300(In), reminiscent of the condensed gas in pure component crystalline solids. We also report here, for the first time, the experimental observation of a direct binding interaction between adsorbed CH4 molecules and the hydroxyl groups within the pore of a material. This is different from the arrangement found in CH4/water clathrates, the CH4 store of nature.