Search

La pérdida de tensión por relajación en las armaduras activas afecta de forma importante a las estructuras de hormigón pretensado. Por ello se realizan ensayos de relajación de los alambres y cordones de pretensado tras su fabricación. Después, el material es enrollado y almacenado durante periodos que en ocasiones pueden superar el año de duración. Generalmente se desprecia la influencia que estas operaciones posteriores a la fabricación pueden tener sobre el material. Sin embargo, diversos fabricantes y suministradores han constatado experimentalmente que, en ocasiones, el material almacenado durante un periodo prolongado presenta pérdidas de relajación mayores que inmediatamente tras su fabricación. En este trabajo se realizan ensayos de laboratorio para comprobar la influencia que el radio de enrollamiento y el periodo de almacenamiento tienen sobre las pérdidas de relajación. También se propone un modelo analítico que permite predecir de manera razonablemente aproximada el valor del ensayo de relajación sobre un alambre sometido a un enrollamiento prolongado. Este modelo explica la evolución del perfil de tensiones durante el proceso de enrollamiento- almacenamiento-desenrollamiento, así como la influencia de las tensiones residuales.Stress relaxation losses on active reinforcement have significant impact on prestressed concrete structures. This is why relaxation tests are carried out on prestressing steel wires and strands after being manufactured. Then, these materials are coiled and stored for a long-term period, sometimes in excess of one year. The influence of these operations, carried out after manufacturing, is usually neglected. Nevertheless, some manufacturers and contractors have noticed that, sometimes, when relaxation tests are carried out after a long-term storage, the relaxation losses found are higher than those measured immediately after manufacturing. In this work, lab tests are performed to check the influence of the coiling radius and the period of storage on the relaxation test. In addition to this, an analytical model is presented to predict the results of a relaxation

Slow, intermediate and high strain rate experiments with UT geometries are performed on aluminum AA7075-T6 sheet metal at various temperatures. The comprehensive experimental program characterizes the plasticity response at temperatures ranging from 20°C to 360°C and at strain rates ranging from 0.001/s to 150/s. The elevated temperature - elevated strain rate experiments are performed on a hydraulic tensile testing machine and a Split Hopkinson Pressure Bar system with a Load Inversion Device along with a custom-made induction heating system. A machine learning based modified Johnson-Cook plasticity model is calibrated to capture the complex strain rate and temperature effect of the observed hardening response., EPJ Web of Conferences, 250, ISSN:2100-014X, ISSN:2101-6275, DYMAT 2021 - 13th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading

Experiments at ten strain rates ranging from 0.001/s to 4/s are carried out on uniaxial tension specimens extracted from DP800 metal sheets. Digital Image Correlation (DIC) is used to obtain surface strain fields and a high speed infrared (IR) camera is employed to measure the corresponding temperature rise due to plastic dissipation. A temperature rise of 60K is witnessed for the highest loading speed whereas minimal temperature rise (, DYMAT 2021 - 13th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading

Under plane stress conditions, most micromechanical and phenomenological models predict a minimum in ductility for plane strain tension stress state. Therefore, the stress state of plane strain tension plays a crucial role in many forming and crash applications and the reliable measurement of the strain to fracture for plane strain tension is particularly crucial when calibrating modern fracture initiation models. Recently, a new experimental technique has been proposed for measuring the strain to fracture for sheet metal after proportional loading under plane strain conditions. The basic configuration of the new setup includes a dihedral punch which applies out-of-plane loading onto a Nakazima-type of discshaped specimen with two symmetric holes and an outer diameter of 60 mm. In the present work, the applicability of the test is extended to high strain rates. High strain rates of about 100/s to 200/s are obtained using a drop weight tower device with an original sensor for load measurements. Quasi static tests are also performed for comparison, keeping the same specimen geometry, image recording parameters and set-up. The effective strains at fracture are compared from quasi-static to high strain rate loading for three different materials, i.e one aluminium alloy and two steels., EPJ Web of Conferences, 250, ISSN:2100-014X, ISSN:2101-6275, DYMAT 2021 - 13th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading