Search

Abstract: Synthesis and decomposition mechanisms of ternary Mg2FeH6 were investigated using in-situ synchrotron radiation powder X-ray diffraction (SR-PXD) and high-pressure differential scanning calorimetry (HP-DSC). Two routes for synthesis of Mg2FeH6 were studied. The first utilizes a ball-milled homogeneous MgH2–Fe powder mixture and the second uses a mixture of Fe and Mg formed by decomposition of the ternary hydride, Mg2FeH6. In both cases the reaction mixture was sintered in a temperature range from RT to 500°C under a hydrogen pressure of 100–120bar. The reaction mechanisms were established using in-situ SR-PXD. The formation of Mg2FeH6 consists of two steps with MgH2 as an intermediate compound, and the presence of magnesium was not observed. In contrast, the decomposition of Mg2FeH6 was found to be a single-step reaction. Additionally, both reactions were investigated using HP-DSC under similar conditions as in the SR-PXD experiments in order to estimate reaction enthalpies and temperatures. Mg2FeH6 was found to form from MgH2 and Fe under hydrogen pressure regardless of whether the MgH2 was introduced in the mixture or formed prior to creation of the ternary hydride. [Copyright &y& Elsevier]

Abstract: A ternary Mg2CoH5 hydride was synthesized using a novel method that relies on a relatively short mechanical milling time (1 h) of a 2:1 MgH2-Co powder mixture followed by sintering at a sufficiently high hydrogen pressure (>85 bar) and heating from RT to 500 °C. The ternary hydride forms in less than 2.5 h (including the milling time) with a yield of ∼90% at ∼300 °C. The mechanisms of formation and decomposition of ternary Mg2CoH5 were studied in detail using an in situ synchrotron radiation powder X-ray diffraction (SR-PXD). The obtained experimental results are supported by morphological and microstructural investigations performed using SEM and high-resolution STEM. Additionally, thermal effects occurring during the desorption reaction were studied using DSC. The morphology of as-prepared ternary Mg2CoH5 is characterized by the presence of porous particles with various shapes and sizes, which, in fact, are a type of nanocomposite consisting mainly of nanocrystallites with a size of ∼5 nm. Mg2CoH5 decomposes at approximately 300 °C to elemental Mg and Co. Additionally, at approximately 400 °C, MgCo is formed as precipitates inserted into the Mg–Co matrix. During the rehydrogenation of the decomposed residues, prior to the formation of Mg2CoH5, MgH2 appears, which confirms its key role in the synthesis of the ternary Mg2CoH5. [Copyright &y& Elsevier]

The ForMAX beamline at the MAX IV Laboratory provides multiscale and multimodal structural characterization of hierarchical materials in the nanometre to millimetre range by combining small- and wide-angle X-ray scattering with full-field microtomography. The modular design of the beamline is optimized for easy switching between different experimental modalities. The beamline has a special focus on the development of novel fibrous materials from forest resources, but it is also well suited for studies within, for example, food science and biomedical research., (open access.)

MAX IV Laboratory is a Swedish national synchrotron radiation facility that comprises three accelerators with varying characteristics. One of the accelerators, the 3 GeV storage ring, is the world's first fourth-generation ring and pioneered the use of the multibend achromat lattice to provide access to ultrahigh brightness X-rays. MAX IV aims to stay at the forefront of the current and future research needs of its multidisciplinary user community, principally located in the Nordic and Baltic regions. Our 16 beamlines currently offer and continue to develop modern X-ray spectroscopy, scattering, diffraction, and imaging techniques to address scientific problems of importance to society., (© The Author(s) 2023.)

BioMAX is the first macromolecular crystallography beamline at the MAX IV Laboratory 3 GeV storage ring, which is the first operational multi-bend achromat storage ring. Due to the low-emittance storage ring, BioMAX has a parallel, high-intensity X-ray beam, even when focused down to 20 µm × 5 µm using the bendable focusing mirrors. The beam is tunable in the energy range 5-25 keV using the in-vacuum undulator and the horizontally deflecting double-crystal monochromator. BioMAX is equipped with an MD3 diffractometer, an ISARA high-capacity sample changer and an EIGER 16M hybrid pixel detector. Data collection at BioMAX is controlled using the newly developed MXCuBE3 graphical user interface, and sample tracking is handled by ISPyB. The computing infrastructure includes data storage and processing both at MAX IV and the Lund University supercomputing center LUNARC. With state-of-the-art instrumentation, a high degree of automation, a user-friendly control system interface and remote operation, BioMAX provides an excellent facility for most macromolecular crystallography experiments. Serial crystallography using either a high-viscosity extruder injector or the MD3 as a fixed-target scanner is already implemented. The serial crystallography activities at MAX IV Laboratory will be further developed at the microfocus beamline MicroMAX, when it comes into operation in 2022. MicroMAX will have a 1 µm × 1 µm beam focus and a flux up to 10 15  photons s -1 with main applications in serial crystallography, room-temperature structure determinations and time-resolved experiments., (open access.)

Evaluation of structure and morphology of extruded wheat gluten (WG) films showed WG protein assemblies elucidated on a range of length scales from nano (4.4 Å and 9 to 10 Å, up to 70 Å) to micro (10 μm). The presence of NaOH in WG films induced a tetragonal structure with unit cell parameters, a = 51.85 Å and c = 40.65 Å, whereas NH(4)OH resulted in a bidimensional hexagonal close-packed (HCP) structure with a lattice parameter of 70 Å. In the WG films with NH(4)OH, a highly polymerized protein pattern with intimately mixed glutenins and gliadins bounded through SH/SS interchange reactions was found. A large content of β-sheet structures was also found in these films, and the film structure was oriented in the extrusion direction. In conclusion, this study highlights complexities of the supramolecular structures and conformations of wheat gluten polymeric proteins in biofilms not previously reported for biobased materials.

This paper describes new sample cells and techniques for in situ powder X-ray diffraction specifically designed for gas absorption studies up to ca 300 bar (1 bar = 100 000 Pa) gas pressure. The cells are for multipurpose use, in particular the study of solid-gas reactions in dosing or flow mode, but can also handle samples involved in solid-liquid-gas studies. The sample can be loaded into a single-crystal sapphire (Al(2)O(3)) capillary, or a quartz (SiO(2)) capillary closed at one end. The advantages of a sapphire single-crystal cell with regard to rapid pressure cycling are discussed, and burst pressures are calculated and measured to be ∼300 bar. An alternative and simpler cell based on a thin-walled silicate or quartz glass capillary, connected to a gas source via a VCR fitting, enables studies up to ∼100 bar. Advantages of the two cell types are compared and their applications are illustrated by case studies.

Hydrogen is recognized as a potential, extremely interesting energy carrier system, which can facilitate efficient utilization of unevenly distributed renewable energy. A major challenge in a future "hydrogen economy" is the development of a safe, compact, robust, and efficient means of hydrogen storage, in particular, for mobile applications. Here we report on a new concept for hydrogen storage using nanoconfined reversible chemical reactions. LiBH4 and MgH2 nanoparticles are embedded in a nanoporous carbon aerogel scaffold with pore size Dmax approximately 21 nm and react during release of hydrogen and form MgB2. The hydrogen desorption kinetics is significantly improved compared to bulk conditions, and the nanoconfined system has a high degree of reversibility and stability and possibly also improved thermodynamic properties. This new scheme of nanoconfined chemistry may have a wide range of interesting applications in the future, for example, within the merging area of chemical storage of renewable energy.

Available thermodynamic data and seismic models favor perovskite (MgSiO3) as the stable phase in the mantle. MgSiO3 was heated at temperatures from 1900 to 3200 kelvin with a Nd-YAG laser in diamond-anvil cells to study the phase relations at pressures from 45 to 100 gigapascals. The quenched products were studied with synchrotron x-ray radiation. The results show that MgSiO3 broke down to a mixture of MgO (periclase) and SiO2 (stishovite or an unquenchable polymorph) at pressures from 58 to 85 gigapascals. These results imply that perovskite may not be stable in the lower mantle and that it might be necessary to reconsider the compositional and density models of the mantle.