Search

Tin‐lead (Sn‐Pb) perovskite solar cells (PSCs) have gained interest as candidates for the bottom cell of all‐perovskite tandem solar cells due to their broad absorption of the solar spectrum. A notable challenge arises from the prevalent use of the hole transport layer, PEDOT:PSS, known for its inherently high doping level. This high doping level can lead to interfacial recombination, imposing a significant limitation on efficiency. Herein, NaOH is used to dedope PEDOT:PSS, with the aim of enhancing the efficiency of Sn‐Pb PSCs. Secondary ion mass spectrometer profiles indicate that sodium ions diffuse into the perovskite layer, improving its crystallinity and enlarging its grains. Comprehensive evaluations, including photoluminescence and nanosecond transient absorption spectroscopy, confirm that dedoping significantly reduces interfacial recombination, resulting in an open‐circuit voltage as high as 0.90 V. Additionally, dedoping PEDOT:PSS leads to increased shunt resistance and high fill factor up to 0.81. As a result of these improvements, the power conversion efficiency is enhanced from 19.7% to 22.6%. Utilizing NaOH to dedope PEDOT:PSS also transitions its nature from acidic to basic, enhancing stability and exhibiting less than a 7% power conversion efficiency loss after 1176 h of storage in N2 atmosphere. [ABSTRACT FROM AUTHOR]

A universal approach for enhancing water affinity in polymer photocatalysts by covalently attaching hydrophilic photocrosslinkers to polymer chains is presented. A series of bisdiazirine photocrosslinkers, each comprising bisdiazirine photophores linked by various aliphatic (CL‐R) or ethylene glycol‐based bridge chains (CL‐TEG), is designed to prevent crosslinked polymer photocatalysts from degradation through a safe and efficient photocrosslinking reaction at a wavelength of 365 nm. When employing the hydrophilic CL‐TEG as a photocrosslinker with polymer photocatalysts (F8BT), the hydrogen evolution reaction (HER) rate is considerably enhanced by 2.5‐fold compared to that obtained using non‐crosslinked F8BT photocatalysts, whereas CL‐R‐based photocatalysts yield HER rates comparable to those of non‐crosslinked counterparts. Photophysical analyses including time‐resolved photoluminescence and transient absorption measurements reveal that adding CL‐TEG accelerates exciton separation, forming long‐lived charge carriers. Additionally, the in‐depth study using molecular dynamics simulations elucidates the dual role of CL‐TEG: it enhances water penetration into the polymer matrix and stabilizes charge carriers after exciton generation against undesirable recombination. Therefore, the strategy highlights endowing a high‐permittivity environment within polymer photocatalyst in a controlled manner is crucial for enhancing photocatalytic redox reactivity. Furthermore, this study shows that this hydrophilic crosslinker approach has a broad applicability in general polymer semiconductors and their nanoparticulate photocatalysts. [ABSTRACT FROM AUTHOR]

Despite recent advances in colloidal quantum dot (CQD) photovoltaics, several challenges persist and hinder further improvements. In particular, the Fermi level mismatch between the iodide‐treated photoactive and thiol‐treated hole‐transporting CQD layers creates an unfavorable energy band for hole collection. Furthermore, the numerous surface cracks in the thiol‐treated CQD layer facilitate direct contact between the photoactive CQD layer and the metal electrode, consequently leading to reduced device performance. To address these issues, a polycatechol functionalized MXene (PCA‐MXene) that can serve both as a dopant and an interlayer for CQD photovoltaics is developed. By achieving a uniformly dispersed mixture in a butylamine solvent, PCA‐MXene enables the effective combination of MXene and CQDs. This results in the modification of the work function of CQDs and the modulation of the energy band alignment, ultimately promoting enhanced hole extraction. Moreover, the PCA‐MXene employed as an interlayer effectively covers the surface cracks present in the thiol‐treated CQD layer. This coverage inhibits both metal electrode penetration and moisture intrusion into the device. Owing to these advantages, the CQD photovoltaics incorporating PCA‐MXene achieve a power conversion efficiency (PCE) of 13.6%, accompanied by enhanced thermal stability, in comparison to the reference device with a PCE of 12.8%. [ABSTRACT FROM AUTHOR]

Recent progress in organic photovoltaics (OPVs) has been enabled by optimization of the energetic driving force for charge separation, and thus maximization of open-circuit voltage, using non-fullerene acceptor (NFA) materials. In spite of this, the carrier dynamics and relative energies of the key states controlling the photophysics of these systems are still under debate. Herein, we report an in-depth ultrafast spectroscopic study of a representative OPV system based on a polymer donor PffBT4T-2OD and a small-molecule NFA EH-IDTBR. Global analysis of the transient absorption data reveals efficient energy transfer between donor and acceptor molecules. The extracted kinetics suggest that slow (∼15 ps) generation of charge carriers is followed by significant geminate recombination. This contrasts with the "reference" PffBT4T-2OD:PC71BM system where bimolecular recombination dominates. Using temperature-dependent pump-push-photocurrent spectroscopy, we estimate the activation energy for the dissociation of bound charge-transfer states in PffBT4T-2OD:EH-IDTBR to be 100 ± 6 meV. We also observe an additional activation energy of 14 ± 7 meV, which we assign to the de-trapping of mobile carriers. This work provides a comprehensive picture of photophysics in a system representing new generation of OPV blends with a small driving force for charge separation. [ABSTRACT FROM AUTHOR]