21 results on '"Chaibakhsh, N."'
Search Results
2. Enhanced photocatalytic activity of ZnS/TiO2 nanocomposite by nitrogen and tetrafluoromethane plasma treatments.
- Author
-
Khosravi, S., Chaibakhsh, N., Jafari, S., and Nilkar, M.
- Subjects
- *
CATALYTIC activity , *NON-thermal plasmas , *BAND gaps , *NANOPARTICLES , *PHOTOCATALYSTS , *NITROGEN plasmas , *THERMAL plasmas - Abstract
In the present study, the photocatalytic performance of ZnS/TiO2 nanocomposite was investigated through the photodegradation of Acid Blue 113 (AB113) dye under ultraviolet light exposure. TiO2 and ZnS-based nanocomposites suffer from relatively wide bandgap energy and low adsorption capacity which limit their photocatalytic applications. These problems can be suppressed by modifying the surface of nanocomposite particles by the non-thermal plasma. Herein, surface modification of the ZnS/TiO2 nanocomposite was performed using a dielectric-barrier discharge plasma under nitrogen (N2) and tetrafluoromethane (CF4) gases. The characteristics of the plasma-treated nanocomposites were evaluated by XRD, FTIR, Raman, FESEM, EDS, BET, BJH, and DRS analyses. According to the results, by applying plasma treatment, cation and anion vacancies are produced that reduces the band gap energy of the photocatalyst hence improves its performance. The results indicate that the photocatalytic efficiency of the N2-plasma-treated nanocatalyst has been almost two times higher than that of the untreated ZnS/TiO2. It was found that after 25 min of UV irradiation, the AB113 was almost completely degraded in the presence of N2-plasma-treated ZnS/TiO2 nanocomposite (about 95%), whereas, it was degraded by 64% and 46% in the presence of CF4-plasma-treated ZnS/TiO2 and untreated ZnS/TiO2, respectively. This study presents a new approach to designing cost-effective plasma-treated photocatalysts to degrade organic contaminants in wastewater. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
3. Formulation development and optimization of palm kernel oil esters-based nanoemulsions containing sodium diclofenac
- Author
-
Rezaee M, Basri M, Rahman RNZRA, Salleh AB, Chaibakhsh N, and Abedi Karjiban R
- Subjects
Medicine (General) ,R5-920 - Abstract
Malahat Rezaee,1 Mahiran Basri,1,2 Raja Noor Zaliha Raja Abdul Rahman,3 Abu Bakar Salleh,3 Naz Chaibakhsh,4 Roghayeh Abedi Karjiban21Institute of Bioscience, 2Faculty of Science, 3Faculty of Biotechnology and Biomolecular Science, Universiti Putra Malaysia, Serdang, Selangor, Malaysia; 4Faculty of Science, University of Guilan, Rasht, IranAbstract: Response surface methodology was employed to study the effect of formulation composition variables, water content (60%–80%, w/w) and oil and surfactant (O/S) ratio (0.17–1.33), as well as high-shear emulsification conditions, mixing rate (300–3,000 rpm) and mixing time (5–30 minutes) on the properties of sodium diclofenac-loaded palm kernel oil esters-nanoemulsions. The two response variables were droplet size and viscosity. Optimization of the conditions according to the four variables was performed for preparation of the nanoemulsions with the minimum values of particle size and viscosity. The results showed that the experimental data could be sufficiently fitted into a third-order polynomial model with multiple regression coefficients (R2) of 0.938 and 0.994 for the particle size and viscosity, respectively. Water content, O/S ratio and mixing time, quadrics of all independent variables, interaction between O/S ratio and mixing rate and between mixing time and rate, as well as cubic term of water content had a significant effect (P
- Published
- 2014
4. Spectral and Aggregative Properties of Acid Blue 113 in Aqueous and Aqueous Solutions of Urea and in Colloids of Silver Nanoparticles
- Author
-
Shokoofehpoor, F., primary, Ghanadzadeh Gilani, A., additional, Chaibakhsh, N., additional, Khorshidi, A., additional, Poormohammadi, Z., additional, and Abolghasemi, S., additional
- Published
- 2020
- Full Text
- View/download PDF
5. Application of Fuzzy Modeling and Optimization in Enzymatic Esterification Process
- Author
-
Chaibakhsh, A., primary, Chaibakhsh, N., additional, and Rahman, M. B. Abdul, additional
- Published
- 2011
- Full Text
- View/download PDF
6. Fuzzy modeling and optimization of biochemical processes: A case study.
- Author
-
Chaibakhsh, A., Chaibakhsh, N., and Rahman, M.B.A.
- Published
- 2010
- Full Text
- View/download PDF
7. Lipase-catalyzed synthesis of a sugar alcohol-based nonionic surfactant
- Author
-
Adnani, A., Basri, M., Chaibakhsh, N., Salleh, A. B., and Rahman, M. B. A.
8. High-performance NiO@Fe 3 O 4 magnetic core-shell nanocomposite for catalytic ozonation degradation of pharmaceutical pollution.
- Author
-
Amini M, Hosseini SMP, and Chaibakhsh N
- Subjects
- Kinetics, Ciprofloxacin, Pharmaceutical Preparations, Magnetic Phenomena, Nanocomposites, Ozone
- Abstract
Pharmaceuticals that are present in superficial waters and wastewater are becoming an ecological concern. Therefore, it is necessary to provide high-performance methods to limit the harmful ecological effects of these materials to achieve a sustainable environment. In this research, NiO@Fe
3 O4 nanocomposite was prepared by the co-precipitation method and utilized in the catalytic ozonation process for the degradation of 1-cyclopropyl-6-fluoro-4-oxo-7-piperazin-1-yl-quinoline-3-carboxylic acid (ciprofloxacin antibiotic), for the first time. The influencing parameters in the degradation process were analyzed and optimized via response surface methodology (RSM). The optimal ciprofloxacin removal efficiency (100%) was found at pH = 6.5, using 7.5 mg of the NiO@Fe3 O4 nanocatalyst and 0.2 g L-1 h-1 ozone (O3 ) flow, applied over 20 min. Results showed a significant synergistic effect in the analyzed system, which makes the proposed catalytic ozonation process more efficient than using the catalyst and ozone separately. Also, based on the kinetic analysis data, the catalytic ozonation process followed the pseudo-first-order model. In addition, the nanocatalyst showed high recyclability and stability (88.37%) after five consecutive catalytic ozonation process cycles. In conclusion, the NiO@Fe3 O4 nanocatalyst/O3 system can be effectively used for the treatment of pharmaceutical contaminants., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)- Published
- 2023
- Full Text
- View/download PDF
9. Efficient removal of cytotoxic drugs from wastewater by single-stage combined photocatalysis-algae treatment process.
- Author
-
Kouchakpour F, Chaibakhsh N, and Naeemi AS
- Subjects
- Wastewater, Antineoplastic Agents, Microalgae, Pharmaceutical Preparations, Water Pollutants, Chemical analysis, Water Purification
- Abstract
In this study, the efficiency of a single-stage combined photocatalysis-algae treatment process in the removal of the anticancer drug, flutamide (FLU), from aqueous solution has been evaluated. The removal abilities of the individual blue-green alga ( Anabaena sp.), nano-sized MoS
2 photocatalyst under visible light irradiation, and combined photocatalysis-algal treatment process were investigated. Using response surface optimization technique, 85.1% of the FLU removal was achieved at the optimum conditions of pH 7.0, nanophotocatalyst dose of 15.23 mg and 12.12 mL of the alga in 30 min. Compared to the individual biological and chemical treatment methods, a higher FLU removal efficiency was obtained at a shorter reaction time by using the combined treatment system. Kinetics study showed that FLU removal by the algal treatment, photocatalysis, and the combined processes followed the modified Freundlich, pseudo-first-order, and nonlinear sigmoidal kinetic models, respectively. The results indicate that a synergistic effect appears when algal treatment process and photocatalysis are performed simultaneously. The novel combined system is a low-cost and efficient microalgae-based technology for the removal of cytotoxic compounds from wastewaters.- Published
- 2021
- Full Text
- View/download PDF
10. Coagulation/Fenton oxidation combined treatment of compost leachate using quince seed mucilage as an effective biocoagulant.
- Author
-
Kanaani F, Tavakoli B, Pendashteh AR, Chaibakhsh N, and Ostovar F
- Subjects
- Hydrogen Peroxide, Iron, Oxidation-Reduction, Composting, Rosaceae, Water Pollutants, Chemical analysis
- Abstract
In this study, quince seed mucilage (QSM) has been introduced as a novel biocoagulant for the pretreatment of leachate obtained from a composting facility. Response surface methodology (RSM) was used to study and optimize the effect of pH, QSM dosage and time on the coagulation performance. At the optimum conditions using 1370 mg L
-1 of QSM at pH 3.8 and 29 min, 45.0% COD reduction was achieved in the coagulation-flocculation (CF) stage. After CF pretreatment stage, Fenton oxidation (FO) process was applied on the leachate. Maximum COD reduction was obtained at pH 2.5, H2 O2 concentration of 190 mM, and Fe2+ concentration of 1.64 mM. At the optimum conditions of the combined treatment process, up to 84.4% COD, 99.4% turbidity and 98.2% BOD were removed. The combined CF/FO process using QSM in the CF stage was found to be an effective method for the treatment of compost leachate.- Published
- 2021
- Full Text
- View/download PDF
11. Highly efficient removal of surfactant from industrial effluents using flaxseed mucilage in coagulation/photo-Fenton oxidation process.
- Author
-
Mirbahoush SM, Chaibakhsh N, and Moradi-Shoeili Z
- Subjects
- Ferric Compounds chemistry, Hydrogen Peroxide chemistry, Manganese Compounds chemistry, Metal Nanoparticles chemistry, Oxidation-Reduction, Oxides chemistry, Sodium Dodecyl Sulfate chemistry, Surface-Active Agents chemistry, Wastewater chemistry, Flax metabolism, Industrial Waste analysis, Sodium Dodecyl Sulfate analysis, Surface-Active Agents analysis, Waste Disposal, Fluid methods, Water Pollutants, Chemical analysis
- Abstract
In this study, flaxseed mucilage (FSM) has been used as a green coagulant in the pretreatment stage of a combined process for the removal of an anionic surfactant, sodium dodecyl sulfate (SDS). In the post-treatment stage, heterogeneous photo-Fenton-like oxidation using MnFe
2 O4 nanocatalyst was applied to remove the remained SDS. Using response surface methodological approach, optimum condition in the coagulation process was obtained at pH 7.0, FSM dose of 100 mg L-1 and 30 min. In the photo-Fenton oxidation process, complete SDS removal was achieved using 76 mg of the nanocatalyst, 1.07 mL of H2 O2 at 17 min. Application of the combined process on the real wastewater samples indicates that the proposed method can be used effectively for the treatment of industrial effluents containing surfactants., (Copyright © 2019 Elsevier Ltd. All rights reserved.)- Published
- 2019
- Full Text
- View/download PDF
12. Enzyme mimetic activities of spinel substituted nanoferrites (MFe 2 O 4 ): A review of synthesis, mechanism and potential applications.
- Author
-
Chaibakhsh N and Moradi-Shoeili Z
- Subjects
- Biomimetic Materials chemistry, Biosensing Techniques, Ferric Compounds chemistry, Aluminum Oxide chemistry, Biomimetic Materials chemical synthesis, Enzymes metabolism, Ferric Compounds chemical synthesis, Magnesium Oxide chemistry, Nanostructures chemistry
- Abstract
Recently, the intrinsic enzyme-like activities of some nanoscale materials known as "nanozymes" have become a growing area of interest. Nanosized spinel substituted ferrites (SFs) with general formula of MFe
2 O4 , where M represents a transition metal, are among a group of magnetic nanomaterials attracting researchers' enormous attention because of their excellent catalytic performance, biomedical applications and capability for environmental remediation. Due to their unique nanoscale physical-chemical properties, they have been used to mimic the catalytic activity of natural enzymes such as peroxidases, oxidases and catalases. In addition, various nanocomposite materials based on SFs have been introduced as novel artificial enzymes. This review mainly highlights the synthetic approaches for newly developed SF-nanozymes and also the structural/experimental factors that are effective on the kinetics and catalytic mechanisms of enzyme-like reactions. SF-nanozymes have been found potentially capable of being applied in various fields such as enzyme-free immunoassays and biosensors for colorimetric detection of biological molecules. Therefore, the application of SF nanoparticles, as efficient enzyme mimetics have been detailed discussed., (Copyright © 2019 Elsevier B.V. All rights reserved.)- Published
- 2019
- Full Text
- View/download PDF
13. Optimized fabrication of newly cholesterol biosensor based on nanocellulose.
- Author
-
Abdi MM, Razalli RL, Tahir PM, Chaibakhsh N, Hassani M, and Mir M
- Subjects
- Analysis of Variance, Aniline Compounds chemistry, Electrodes, Glutaral chemistry, Ionic Liquids chemistry, Nanoparticles ultrastructure, Regression Analysis, Reproducibility of Results, Biosensing Techniques methods, Cellulose chemistry, Cholesterol metabolism, Nanoparticles chemistry
- Abstract
A novel and sensitive electrochemical cholesterol biosensor was developed based on immobilization cholesterol oxidase (ChOx) on the polyaniline/crystalline nanocellulose/ionic liquid modified Screen-Printed Electrode (PANi/CNC/IL/SPE). A thin layer of ionic liquid (IL) was spin coated on the modified electrode to enhance the electron transferring. Crystalline nanocellulose was prepared from Semantan bamboo (Gigantochloa scortechinii) via acid hydrolysis and it was used to synthesize a nanocomposite of PANi/CNC via in situ oxidative polymerization process. FESEM and TEM images showed high porosity of the nanostructure with no phase separation, revealing the homogenous polymerization of the monomer on the surface of the crystalline cellulose. Research surface methodology (RSM) was carried out to optimize the parameters and conditions leading to maximize the performance and sensitivity of biosensors. The PANi/CNC/IL/GLU/ChOx-modified electrode showed a high sensitivity value of 35.19 μA mM/cm
-2 at optimized conditions. The proposed biosensor exhibited a dynamic linear range of 1 μM to 12 mM (R2 = 0.99083) with the low Limit of Detection of 0.48 μM for cholesterol determination. An acceptable reproducibility (RSDs ≤3.76%) and repeatability (RSDs ≤3.31%) with the minimal interference from the coexisting electroactive compounds such as ascorbic acid, uric acid and glucose was observed for proposed biosensor., (Copyright © 2019 Elsevier B.V. All rights reserved.)- Published
- 2019
- Full Text
- View/download PDF
14. Enzymatic production of a solvent-free menthyl butyrate via response surface methodology catalyzed by a novel thermostable lipase from Geobacillus zalihae .
- Author
-
Wahab RA, Basri M, Rahman RN, Salleh AB, Rahman MB, Chaibakhsh N, and Leow TC
- Abstract
Most substrate for esterification has the inherent problem of low miscibility which requires addition of solvents into the reaction media. In this contribution, we would like to present an alternative and feasible option for an efficient solvent-free synthesis of menthyl butyrate using a novel thermostable crude T1 lipase. We investigated the effects of incubation time, temperature, enzyme loading and substrate molar ratio and determined the optimum conditions. The high conversion of menthyl butyrate catalyzed by crude T1 lipase in a solvent-free system is greatly affected by temperature and time of the reaction media. The highest yield of menthyl butyrate was 99.3% under optimized conditions of 60 °C, incubation time of 13.15 h, 2.53 mg, 0.43% (w/w) enzyme to substrate ratio and at molar ratio of butyric anhydride/menthol 2.7:1. Hence, the investigation revealed that the thermostable crude T1 lipase successfully catalyzed the high-yield production of menthyl butyrate in a solvent-free system. The finding suggests that the crude T1 lipase was a promising alternative to overcome shortcomings associated with solvent-assisted enzymatic reactions.
- Published
- 2014
- Full Text
- View/download PDF
15. Modeling of membrane bioreactor treating hypersaline oily wastewater by artificial neural network.
- Author
-
Pendashteh AR, Fakhru'l-Razi A, Chaibakhsh N, Abdullah LC, Madaeni SS, and Abidin ZZ
- Subjects
- Models, Theoretical, Bioreactors, Membranes, Artificial, Neural Networks, Computer
- Abstract
A membrane sequencing batch reactor (MSBR) treating hypersaline oily wastewater was modeled by artificial neural network (ANN). The MSBR operated at different total dissolved solids (TDSs) (35,000; 50,000; 100,000; 150,000; 200,000; 250,000mg/L), various organic loading rates (OLRs) (0.281, 0.563, 1.124, 2.248, and 3.372kg COD/(m(3)day)) and cyclic time (12, 24, and 48h). A feed-forward neural network trained by batch back propagation algorithm was employed to model the MSBR. A set of 193 operational data from the wastewater treatment with the MSBR was used to train the network. The training, validating and testing procedures for the effluent COD, total organic carbon (TOC) and oil and grease (O&G) concentrations were successful and a good correlation was observed between the measured and predicted values. The results showed that at OLR of 2.44kg COD/(m(3)day), TDS of 78,000mg/L and reaction time (RT) of 40h, the average removal rate of COD was 98%. In these conditions, the average effluent COD concentration was less than 100mg/L and met the discharge limits., (Copyright © 2011 Elsevier B.V. All rights reserved.)
- Published
- 2011
- Full Text
- View/download PDF
16. Chemometric analysis of lipase-catalyzed synthesis of xylitol esters in a solvent-free system.
- Author
-
Adnani A, Basri M, Chaibakhsh N, Ahangar HA, Salleh AB, Rahman RN, and Abdul Rahman MB
- Subjects
- Caproates chemistry, Catalysis, Esterification, Fungal Proteins, Models, Chemical, Temperature, Caproates chemical synthesis, Decanoic Acids chemistry, Emulsifying Agents chemical synthesis, Enzymes, Immobilized chemistry, Lipase chemistry, Surface-Active Agents chemical synthesis, Xylitol chemistry
- Abstract
Immobilized Candida antarctica lipase B-catalyzed esterification of xylitol and two fatty acids (capric and caproic acid) were studied in a solvent-free system. The Taguchi orthogonal array method based on three-level-four-variables with nine experiments was applied for the analysis and optimization of the reaction parameters including time, substrate molar ratio, amount of enzyme, and amount of molecular sieve. The obtained conversion was higher in the esterification of xylitol and capric acid with longer chain length. The optimum conditions derived via the Taguchi approach for the synthesis of xylitol caprate and xylitol caproate were reaction time, 29 and 18h; substrate molar ratio, 0.3 and 1.0; enzyme amount, 0.20 and 0.05g, and molecular sieve amount of 0.03g, respectively. The good correlation between the predicted conversions (74.18% and 61.23%) and the actual values (74.05% and 60.5%) shows that the model derived from the Taguchi orthogonal array can be used for optimization and better understanding of the effect of reaction parameters on the enzymatic synthesis of xylitol esters in a solvent-free system., (Copyright © 2011 Elsevier Ltd. All rights reserved.)
- Published
- 2011
- Full Text
- View/download PDF
17. Effect of alcohol structure on the optimum condition for novozym 435-catalyzed synthesis of adipate esters.
- Author
-
Abdul Rahman MB, Chaibakhsh N, and Basri M
- Abstract
Immobilized Candida antarctica lipase B, Novozym 435, was used as the biocatalyst in the esterification of adipic acid with four different isomers of butanol (n-butanol, sec-butanol, iso-butanol, and tert-butanol). Optimum conditions for the synthesis of adipate esters were obtained using response surface methodology approach with a four-factor-five-level central composite design concerning important reaction parameters which include time, temperature, substrate molar ratio, and amount of enzyme. Reactions under optimized conditions has yielded a high percentage of esterification (>96%) for n-butanol, iso-butanol, and sec-butanol, indicating that extent of esterification is independent of the alcohol structure for primary and secondary alcohols at the optimum conditions. Minimum reaction time (135 min) for achieving maximum ester yield was obtained for iso-butanol. The required time for attaining maximum yield and also the initial rates in the synthesis of di-n-butyl and di-sec-butyl adipate were nearly the same. Immobilized Candida antarctica lipase B was also capable of esterifying tert-butanol with a maximum yield of 39.1%. The enzyme is highly efficient biocatalyst for the synthesis of adipate esters by offering a simple production process and a high esterification yield.
- Published
- 2011
- Full Text
- View/download PDF
18. Modeling and optimization of lipase-catalyzed production of succinic acid ester using central composite design analysis.
- Author
-
Abdul Rahman MB, Jarmi NI, Chaibakhsh N, and Basri M
- Subjects
- Esterification, Esters metabolism, Fatty Alcohols metabolism, Fungal Proteins, Temperature, Enzymes, Immobilized metabolism, Lipase metabolism, Models, Chemical, Succinates metabolism
- Abstract
Esterification of succinic acid with oleyl alcohol catalyzed by immobilized Candida antarctica lipase B (Novozym 435) was investigated in this study. Response surface methodology (RSM) based on a five-level, four-variable central composite design (CCD) was used to model and analyze the reaction. A total of 21 experiments representing different combinations of the four parameters including temperature (35-65°C), time (30-450 min), enzyme amount (20-400 mg), and alcohol:acid molar ratio (1:1-8:1) were generated. A partial cubic equation could accurately model the response surface with a R(2) of 0.9853. The effect and interactions of the variables on the ester synthesis were also studied. Temperature was found to be the most significant parameter that influenced the succinate ester synthesis. At the optimal conditions of 41.1°C, 272.8 min, 20 mg enzyme amount and 7.8:1 alcohol:acid molar ratio, the esterification percentage was 85.0%. The model can present a rapid means for estimating the conversion yield of succinate ester within the selected ranges.
- Published
- 2011
- Full Text
- View/download PDF
19. Lipase-catalyzed dimethyl adipate synthesis: response surface modeling and kinetics.
- Author
-
Chaibakhsh N, Rahman MB, Basri M, Salleh AB, and Abd-Aziz S
- Subjects
- Adipates chemistry, Analysis of Variance, Enzymes, Immobilized chemistry, Fungal Proteins, Kinetics, Linear Models, Lipase chemistry, Methanol chemistry, Models, Chemical, Temperature, Adipates metabolism, Enzymes, Immobilized metabolism, Lipase metabolism
- Abstract
Dimethyl adipate (DMA) was synthesized by immobilized Candida antarctica lipase B-catalyzed esterification of adipic acid and methanol. To optimize the reaction conditions of ester production, response surface methodology was applied, and the effects of four factors namely, time, temperature, enzyme concentration, and molar ratio of substrates on product synthesis were determined. A statistical model predicted that the maximum conversion yield would be 97.6%, at the optimal conditions of 58.5 degrees C, 54.0 mg enzyme, 358.0 min, and 12:1 molar ratio of methanol to adipic acid. The R(2) (0.9769) shows a high correlation between predicted and experimental values. The kinetics of the reaction was also investigated in this study. The reaction was found to obey the ping-pong bi-bi mechanism with methanol inhibition. The kinetic parameters were determined and used to simulate the experimental results. A good quality of fit was observed between the simulated and experimental initial rates.
- Published
- 2010
- Full Text
- View/download PDF
20. Application of artificial neural network for yield prediction of lipase-catalyzed synthesis of dioctyl adipate.
- Author
-
Abdul Rahman MB, Chaibakhsh N, Basri M, Salleh AB, and Abdul Rahman RN
- Subjects
- Algorithms, Catalysis, Fungal Proteins, Adipates chemistry, Lipase metabolism, Neural Networks, Computer
- Abstract
In this study, an artificial neural network (ANN) trained by backpropagation algorithm, Levenberg-Marquadart, was applied to predict the yield of enzymatic synthesis of dioctyl adipate. Immobilized Candida antarctica lipase B was used as a biocatalyst for the reaction. Temperature, time, amount of enzyme, and substrate molar ratio were the four input variables. After evaluating various ANN configurations, the best network was composed of seven hidden nodes using a hyperbolic tangent sigmoid transfer function. The correlation coefficient (R2) and mean absolute error (MAE) values between the actual and predicted responses were determined as 0.9998 and 0.0966 for training set and 0.9241 and 1.9439 for validating dataset. A simulation test with a testing dataset showed that the MAE was low and R2 was close to 1. These results imply the good generalization of the developed model and its capability to predict the reaction yield. Comparison of the performance of radial basis network with the developed models showed that radial basis function was more accurate but its performance was poor when tested with unseen data. In further part of the study, the feedforward backpropagation model was used for prediction of the ester yield within the given range of the main parameters.
- Published
- 2009
- Full Text
- View/download PDF
21. Optimized lipase-catalyzed synthesis of adipate ester in a solvent-free system.
- Author
-
Chaibakhsh N, Abdul Rahman MB, Abd-Aziz S, Basri M, Salleh AB, and Abdul Rahman RN
- Subjects
- Bioreactors, Biotechnology methods, Catalysis, Esterification, Hydrogen-Ion Concentration, Kinetics, Temperature, Time Factors, Adipates metabolism, Candida enzymology, Enzymes, Immobilized metabolism, Lipase metabolism, Solvents chemistry
- Abstract
Immobilized Candida antarctica lipase-catalyzed esterification of adipic acid and oleyl alcohol was investigated in a solvent-free system (SFS). Optimum conditions for adipate ester synthesis in a stirred-tank reactor were determined by the response surface methodology (RSM) approach with respect to important reaction parameters including time, temperature, agitation speed, and amount of enzyme. A high conversion yield was achieved using low enzyme amounts of 2.5% w/w at 60 degrees C, reaction time of 438 min, and agitation speed of 500 rpm. The good correlation between predicted value (96.0%) and actual value (95.5%) implies that the model derived from RSM allows better understanding of the effect of important reaction parameters on the lipase-catalyzed synthesis of adipate ester in an organic solvent-free system. Higher volumetric productivity compared to a solvent-based system was also offered by SFS. The results demonstrate that the solvent-free system is efficient for enzymatic synthesis of adipate ester.
- Published
- 2009
- Full Text
- View/download PDF
Catalog
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.