Search

Background: Fragment reattachment is the recommended treatment modality in uncomplicated crown fractures. There is a paucity of literature regarding the mechanisms responsible for increased resistance to fracture after fragment rehydration in such cases. Hence, the aim of this proof‐of‐concept study was to decipher the microscopic changes in the penetration characteristics of resin in tooth fragments after different rehydration protocols. Material and Methods: Sixty bovine incisors free of structural deformities were fractured as per a standard protocol and the fragments were stored in saline at 4°C. They were randomly allocated into three groups (n = 20)—Group 1: negative‐control, no‐rehydration, Group 2: rehydration by immersion in distilled water for 15 min, Group 3: rehydration by humidification for 15 min. They were subjected to the "experimental bonding protocol" using an eighth‐generation bonding agent mixed with rhodamine‐B dye. The samples were subjected to decalcification and sectioned into cubical blocks (2 × 2 × 2 mm3). They were embedded in paraffin wax, sectioned by an ultramicrotome and evaluated by using a confocal laser scanning microscope. The depths and width of the resin tags were assessed by image analysis software, and the number of tags was counted manually by blinded evaluators. Statistical analysis was done with Stata‐14. Results: The depth of penetration of the resin tags was greatest in Group 2 (927.81 ± 280.38 μm) followed by Group 3 (902.03 ± 371.85 μm) and Group 1 (287.74 ± 124.80 μm). Similarly, the width of the penetrated resin tags was greatest in Group 2 (58.29 ± 21.15), followed by Group 3 (35.53 ± 22.15) and Group 1 (23.89 ± 6.88). The number of resin tags in the majority of the samples in Group 1 had less than 25 tags (65%), whereas there were more than 25 tags in Group 2 (70%) and Group 3 (75%). These differences were statistically significant (p <.05). Conclusion: The resin penetration, as observed by the number of tags and their depth and width, was significantly affected by the rehydration of the fragments. The fragments rehydrated in the distilled water had greater penetration of resin tags than those rehydrated in a humidification chamber. [ABSTRACT FROM AUTHOR]

Background/Aims: The journal Dental Traumatology (DT) is one of the best resources in the field of dental traumatology. It has always encouraged publication of case reports of good quality. The CARE statement (2011) was developed for uniform and transparent reporting of cases in medical sciences. Since case reports are inseparable from the DT literature, the aim of this bibliometric‐analysis was to evaluate the case reports published in the DT in the last two decades (2001–2021) and assess their compliance regarding CARE guidelines for elucidating the trends in DT and the reporting quality of these papers. Methodology: Two authors independently observed the tables of contents in all issues of DT from 2002–2021 and identified case reports. Selected articles were scrutinized to determine their eligibility. Data extraction was performed, case reports were segregated into domains, and their CARE compliance was evaluated by using a self‐designed‐validated method. Differences between the case reports published in two decades (2002–2011 and 2012–2021) were analysed with the Chi‐square test. Results: A total of 1612 articles published between February 2002 and October 2021 were scrutinized to identify 357 case reports with 277 from the period of 2002–2011 and 80 between 2012 and 2021. The highest number of case reports originated from Asia (2002–2011:135, 2012–2021:28). The CARE compliances of the majority of reports in the decade of 2002–2011 were between 75 and 85% (good) while the CARE compliances of the majority of reports from 2012–2021 were between 85 and 95% (very good) or >95% (excellent). These differences were statistically significant (p <.005). Conclusions: The number of case reports published in the decade of 2002–2011 were more than three times the number of case reports published in the decade of 2012–2021. The highest number of reports in both decades were from Asia and belonged to the therapeutic and prognostic domains. The CARE compliances of the reports in the decade of 2012–2021 were better than those from 2002–2011. [ABSTRACT FROM AUTHOR]

Background: Crown fractures restored by fragment reattachment are liable to re‐fracture, which may cause fragment dislodgement. There is a paucity of literature regarding management of fragment reattachment cases following a further fracture. Hence the aim of the present in‐vitro study was to evaluate and compare the efficacy of three different management protocols for such scenarios. Methodology: Eighty maxillary bovine incisors without structural deformity and with similar dimensions were fractured as per the standard protocol. They were subjected to drying for 24 hours and the fragments were rehydrated by placing them in a humidification chamber for 15 minutes. They were then reattached by using flowable light‐cured composite resin. The teeth (n=20) were fractured again by fixing them in a mechanical frame and using a mallet. They were randomly allocated to three experimental groups. (Group I mechanical abrasion and fragment reattachment, Group II mechanical abrasion, humidification and reattachment, Group III mechanical abrasion and composite restoration, and Group IV positive control with no re‐fracture). The samples were thermocycled and the force required to fracture was tested by using a universal testing machine (Instron‐3360, USA). This was done by applying a tangential load with a speed of 1 mm/min to the teeth with a 500‐kg load cell. Statistical analysis of the results was performed using ANOVA and the independent t‐test. Results: The highest force required to fracture was reported in Group IV (333.26 ± 66.69N) while the lowest was in Group II (254.86 ± 105.23N). The forces in Group I and Group II were 258.36 ± 65.78N and 298.02 ± 97.94N, respectively (p=0.016, F=3.68). The independent t‐test between the groups revealed a significant difference between Group I and Group IV (p= 0.001) and Group II and Group IV (p=0.009). Conclusion: The force required to fracture was significantly lower in the groups involving attachment of the re‐fractured fragments. Among the experimental groups, the group with composite restoration required the highest force to fracture. [ABSTRACT FROM AUTHOR]