Search

White light‐emitting diodes (WLEDs) with high color‐rendering index (CRI, >90) are important for backlight displays and solid‐state lighting applications. Although the well‐developed colloidal quantum dots (QDs) based on heavy metals such as cadmium and lead are promising candidates for WLEDs, the low CRI still remains a significant limitation. In addition, the severe toxicity of heavy metals greatly limits their widespread use. Herein, the study demonstrates low‐cost and environmentally friendly carbon quantum dots (CQDs)‐based WLEDs that exhibit a high CRI of 94.33, surpassing that of conventional cadmium/lead‐containing QD‐based WLEDs. This achievement is attained through the employment of a binary host‐induced exciplex strategy. The high hole/electron mobility and suitable energy levels of the donor and acceptor give rise to a broadband orange–yellow emission stemming from the exciplex. As the host, the binary exciplex is capable of contributing blue and orange–yellow emission components while efficiently mitigating the aggregation‐induced quenching of CQDs. Meanwhile, CQDs effectively address the deep‐red emission gap, enabling the realization of CQDs‐based WLEDs with high CRI. These WLEDs also exhibit a remarkably low turn‐on voltage of 2.8 V, a maximum luminance exceeding 2000 cd m−2, a correlated color temperature of 4976 K, and Commission Internationale de l'Eclairage coordinates of (0.34, 0.32). [ABSTRACT FROM AUTHOR]

Developing violet‐light‐excitable deep‐red (650–660 nm) Eu2+‐activated phosphor is essential for full‐spectrum lighting. However, the related phosphors with facile synthesis, excellent optical performance, and superior thermal stability are scarce. Herein, a new class of (Sr,Ba)Lu2O4: Eu2+ deep‐red phosphor (660 nm) excitable by violet light via Ba2+‐induced local structure engineering is reported. Impressively, tunable emission from 615 to 682 nm, accompanied by significant improvement of thermal stability (81%@423 K), is achieved by partially substituting Sr2+ by Ba2+ in SrLu2O4: Eu2+. Crystal field analysis, density functional theory calculations, and thermoluminescence spectra confirm that the strong distortion and enhanced covalency of [EuO6] octahedron are responsible for spectral tunability, and the formation of shallow trapping states is beneficial for electron compensation to inhibit thermal quenching in the Sr0.85Ba0.15Lu2O4: Eu2+ phosphor. Finally, a white light‐emitting diode prototype fabricated by coupling of the Sr0.85Ba0.15Lu2O4: Eu2+ deep‐red phosphor and commercial blue/green phosphors with violet chip can yield sunlight‐like white light with an ultra‐high color rendering index (Ra = 95.2, R9 = 97.0) and an appropriate correlated color temperature of 4121 K, verifying its significant application potential in full‐spectrum solid‐state lighting. [ABSTRACT FROM AUTHOR]

Lead halide perovskite quantum dots (PeQDs) generally show slow hot carrier (HC) cooling because of the retarded relaxation of longitudinal optical (LO) phonons induced by hot phonon bottleneck effect. Although the feature is beneficial for designing photovoltaic devices beyond Schottky–Queisser limitation by manipulating HC excess energy, it would be hostile toward light‐emitting applications where fast HC cooling is preferred. Herein, a Ni2+ doping strategy is reported to effectively boost HC cooling in CsPbI3 PeQDs and inhibit Auger recombination, giving rise to near unity photoluminescent quantum yield (PLQY) for the Ni: CsPbI3 sample. Femtosecond transient (fs‐TA) absorption, temperature‐dependent PL spectra and theoretical calculations evidence that Ni2+ doping results in the enhancement of electron‐LO phonon coupling, the introduction of extra energy states at band edges, the increasement of effective carrier mass, and the modification of phonon dispersion spectra as well as density of states (DOS) of LO phonon modes. These synergistic roles ensure efficient Klemens decay within Ni: CsPbI3, which facilitates fast decay of hot phonons and break hot phonon bottleneck. These findings provide a valid route to tackle HC dynamics and pave a way for PeQDs‐based efficient light‐emitting applications. [ABSTRACT FROM AUTHOR]

Perovskite quantum dots (PeQDs) are seen as the credible alternative to traditional QDs ascolor converter in liquid crystal display (LCD). Unfortunately, PeQDs sufferfrom instability and color separation, and the prepared PeQDs enhanced films(PQDFs) need the protection of expensive barrier layers, which significantly increases price and limits their application. Herein, large‐area yellow monolithic PQDF is fabricated with both green CsPbBr3 and red CsPbBr1I2QDs encapsulated in the dual matrices of inorganic glass and polypropylene (PP) via an industrialized melt extruding & rolling method. The PQDF shows high photoluminescence quantum yield (PLQY) of 92% and narrow full width at half maximum (FWHM) of 19 nm (green) and 33 nm (red). Importantly, the bare PQDF without barrier layers can pass harsh aging test at 85 °C/85% RH and reach anoperating T90 lifetime over 1000 h. Finally, a white backlit unit is designed by coupling yellow monolithic PQDF with blue light guide panel, and the constructed prototype display shows superior color rendering performance forits narrow green/red emissions, reaching a color gamut of 110% National Television System Committee (NTSC). This work provides a novel and easy‐to‐industrialize route to prepare PQDFs to realize their commercial application in backlit display. [ABSTRACT FROM AUTHOR]

Currently, narrowband light‐convertor is critically urgent for preeminent color representation in lighting and display fields, however, the development of target materials still remains challenging. Herein, glass ceramic (GC) composite based on in situ glass crystallization, where the condense glass network structure acts as effective obstructors for long distance ion diffusion, is elaborately designed to inhibit activators' multi‐sites occupation for acquiring narrowband emitting. Following this strategy, an unprecedented narrowband blue emission of Eu2+‐activators with a peak at 447 nm and full‐width of half maximum (FWHM) of ≈30 nm is developed in a new type of Sr5(PO4)3Cl (SPOCl) GC composite. The Eu2+‐activators' hindered diffusion inside the GC composite makes preferential and limit occupation of the [Sr1O9] sites, enabling narrowband blue luminescence. Furthermore, the GC composite highlights remarkable performance in high‐power violet‐excitable full‐spectrum lighting and transparent display (TD) prototype fields, due to its high color purity (≈98.1%), photoluminescence quantum field (PLQY, ≈80.5%) and thermal stability (≈82.1%@150 °C). This work not only promotes the profound understanding of the relationship between light manipulation and glass crystallization, but also paves the way toward the implementation of high‐quality lighting and display of GC composites. [ABSTRACT FROM AUTHOR]