Search

The tribological behavior and microscopic morphology of Cr2O3-TiO2 thin films produced by magnetron sputtering are thoroughly examined in this work. A thorough analysis was conducted to determine how various Ar: O2 flow ratios (80:20, 85:15, 90:10 and 95:5) affected the films microstructure, mechanical characteristics and tribological performance. Various characterization techniques, including scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and ball-on-disk wear testing, were employed to examine the microstructural features that contributed to the films' mechanical durability. The results indicated a clear correlation between the gas flow ratio and tribological properties. Specifically, the thin films deposited at an Ar: O2 ratio of 85:15 exhibited the best tribological performance, with a notably lower friction coefficient (0.41) and superior wear resistance (wear rate 4.3 × 10− 6 mm³/N·m), making this ratio the optimal choice for achieving enhanced tribological behavior. The superior performance at this ratio is attributed to the formation of a denser and more refined microstructure, as observed in the cross-sectional and surface morphology analyses. These findings highlight the capability of magnetron sputtering to produce high-performance thin films through precise control of the Ar: O2 flow ratio. [ABSTRACT FROM AUTHOR]

Simple Summary: Largemouth bass (LMB) is economically important but highly sensitive to heat stress. Breeding heat-resistant LMB is of big significance in the face of global warming. However, there still lacks an applicable method to efficiently assess the heat resistance of LMB individuals. In this study, we developed a tiered exposure method where the temperature was increased step-wise and the heat resistance of fish was quantified as the lethal cumulative temperature (LCT). Largemouth bass juveniles could be classified as sensitive or resistant to heat stress based on the LCT measurements. Higher degrees of tissue damage and cell apoptosis were found in the livers of the heat-sensitive individuals. Differential expressions of genes involved in the endoplasmic reticulum stress response and apoptosis were also detected in the livers of sensitive and resistant fish. Additionally, LMB juveniles were found to be more resistant than adults and extremely heat-resistant individuals were successfully selected using the tiered heat exposure method. Our method and data are valuable for understanding the thermal biology of LMB and breeding heat-resistant LMB varieties. Largemouth bass (LMB, Micropterus salmoides), a commercially important farmed fish, is vulnerable to heat stress. Breeding heat-resistant LMB is highly desirable in the face of global warming. However, we still lack an efficient method to assess the heat resistance of LMB. In this study, the critical thermal maximum (CTmax) and static exposure methods were first performed to assess the heat resistance of LMB juveniles. The CTmax values of the experimental fish (average body weight 9.87 ± 3.14 g) ranged from 39 to 40 °C but were too close together to differentiate the individual heat resistance. Static exposure experiments with varying temperatures and fish groups also did not provide a clear method for determining the heat resistance. To address these limitations, we developed a tiered exposure method, where the temperature was increased step-wise, starting from 28 to 34 °C at 2 °C increments and then at 0.5 °C increments above 34 °C, with each step lasting one day. The heat resistance of the fish was quantified as the lethal cumulative temperature (LCT), allowing for the classification of fish as sensitive or resistant to heat stress based on their LCT values. To correlate the changes in tissue structure and gene expression with the heat resistance, a new batch of LMB juveniles (average body weight 23.66 ± 6.98 g) were subjected to tiered heat exposure. Brain and liver tissues were collected from the control (without heat exposure), resistant and sensitive (still alive but demonstrated abnormal symptoms) individuals when the temperature was maintained at 35.5 °C for 24 h. The liver tissues of the heat-sensitive individuals showed significant damage and increased cell apoptosis (p < 0.05) relative to those of the resistant ones. The ddit3/chop, bax and casp3 genes demonstrated differential expressions in the liver of the sensitive and resistant fish. Additionally, the LMB juveniles (average body weight 84.06 ± 20.95 g) were found to be more heat resistant than the adults from different sources (average body weight 364.29 ± 84.43 g and 545.71 ± 184.56 g). Through the tiered exposure method, extremely heat-resistant individuals were successfully selected from the population (average body weight 22.69 ± 6.89 g). These findings provide valuable insights into the thermal biology of LMB and the potential for breeding heat-resistant LMB varieties. [ABSTRACT FROM AUTHOR]

This article conducted on-site experiments on improving river sediment to produce planting soil, using aerobic composting technology. The main composting parameters include carbon nitrogen ratio, moisture content, pH value, and temperature. In order to adjust the carbon nitrogen ratio of the sediment, auxiliary materials such as chicken manure, pig manure, rice straw, and wheat straw can be added according to the carbon nitrogen ratio of the sediment itself and relevant specifications. In this article, rice straw and rice husk are added. In the on-site test, a group of piles were maintained above 60 ℃for 3 days, achieving harmless treatment of the sediment. However, when the carbon nitrogen ratio of the pile is less than 20, it is difficult for the sediment temperature to reach 60 ℃, and it cannot be guaranteed that the sediment can achieve harmless treatment. After the improvement, the obstacle factors of the sediment have been reduced, meeting the standard requirements. Nutrients increased, and among the 36 indicators after sediment improvement, only nitrogen was below the standard limit, while potassium and magnesium exceeded the standard limit. All other indicators met the standard requirements.