Search

Architectured materials exhibit negative Poisson's ratios and enhanced mechanical properties compared with regular materials. Their auxetic behaviors emerge from periodic cellular structures regardless of the materials used. The majority of such metamaterials are constructed by top‐down approaches and macroscopic with unit cells of microns or larger. There are also molecular auxetics including natural crystals which are not designable. There is a gap from few nanometers to microns, which may be filled by biomolecular self‐assembly. Herein, we demonstrate two‐dimensional auxetic nanostructures using DNA origami. Structural reconfigurations are performed by two‐step DNA reactions and complemented by mechanical deformation studies using molecular dynamics simulations. We find that the auxetic behaviors are mostly defined by geometrical designs, yet the properties of the materials also play an important role. From elasticity theory, we introduce design principles for auxetic DNA metamaterials. [ABSTRACT FROM AUTHOR]

Architectured materials exhibit negative Poisson's ratios and enhanced mechanical properties compared with regular materials. Their auxetic behaviors emerge from periodic cellular structures regardless of the materials used. The majority of such metamaterials are constructed by top‐down approaches and macroscopic with unit cells of microns or larger. There are also molecular auxetics including natural crystals which are not designable. There is a gap from few nanometers to microns, which may be filled by biomolecular self‐assembly. Herein, we demonstrate two‐dimensional auxetic nanostructures using DNA origami. Structural reconfigurations are performed by two‐step DNA reactions and complemented by mechanical deformation studies using molecular dynamics simulations. We find that the auxetic behaviors are mostly defined by geometrical designs, yet the properties of the materials also play an important role. From elasticity theory, we introduce design principles for auxetic DNA metamaterials. [ABSTRACT FROM AUTHOR]

Lithium-sulfur batteries (LSBs) are promising candidates as next-generation secondary batteries due to their advantages with respect to cost and energy density. However, their practical application is hindered by their slow kinetics and the shuttle behavior of soluble polysulfide ions. Herein, we successfully prepared a three-dimensional porous conductive catalyst material with an atomic-level Ni–N 4 structure. The results showed that a strong adsorption of lithium polysulfides (LiPSs) by the Ni–N 4 catalytic active sites and a strong catalytic effect on the conversion of LiPSs in the sulfur reduction reaction (SRR) as well as the lithium sulfide oxidation reaction (SOR) were achieved, effectively inhibiting the shuttle effect of polysulfide ions and promoting the sulfur cathode kinetics process. Thus, the LSBs exhibited an excellent performance with a specific capacity of 829.8 mAh g–1 and an average coulombic efficiency of 98.8 % after 420 cycles at a high rate of 1 C. Our work provides new insights and novel efforts to solve the shuttle effect in LSBs. [ABSTRACT FROM AUTHOR]

The responses of DNA origami conformation to UV radiation of different wavelengths and doses are investigated. Short- and medium-wavelength UV light can cause photo-lesions in DNA origami. At moderate doses, the lesions do not cause any visible defects in the origami, nor do they significantly affect the hybridization capability. Instead, they help relieve the internal stress in the origami structure and restore it to the designed conformation. At high doses, staple dissociation increases which causes structural disintegration. Long-wavelength UV does not show any effect on origami conformation by itself. We show that this UV range can be used in conjunction with photoactive molecules for photo-reconfiguration, while avoiding any damage to the DNA structures. [ABSTRACT FROM AUTHOR]

Here we design a DNA origami-based site-specific molecular capture and release platform operated by a DNAzyme-mediated logic gate process. We show the programmability and versatility of this platform with small molecules, proteins, and nanoparticles, which may also be controlled by external light signals. [ABSTRACT FROM AUTHOR]

The dynamic reconfiguration of a hierarchically assembled tubular structure is demonstrated using the DNA origami technique. Short cylindrical DNA origami monomers are synthesized and linked into elongated tubules, which can then be disassembled via toehold-mediated strand displacement. The disassembled subunits are subsequently linked into tubules of a different chirality. The reconfiguration is performed with the subunits carrying dumbbell hairpin DNA oligonucleotides or gold nanoparticles (AuNPs). The reconfiguration of higher order origami structures presented here is useful for constructing dynamic nanostructures that exceed the size limit of single DNA origami and may facilitate the study of molecular or particle interactions by tuning their relative distance and organization. [ABSTRACT FROM AUTHOR]

Major Depressive Disorder (MDD) is a complex mental disorder that involves alterations in signal transmission across multiple scales and structural abnormalities. The development of effective antidepressants (ADs) has been hindered by the dominance of monoamine hypothesis, resulting in slow progress. Traditional ADs have undesirable traits like delayed onset of action, limited efficacy, and severe side effects. Recently, two categories of fast-acting antidepressant compounds have surfaced, dissociative anesthetics S-ketamine and its metabolites, as well as psychedelics such as lysergic acid diethylamide (LSD). This has led to structural research and drug development of the receptors that they target. This review provides breakthroughs and achievements in the structure of depression-related receptors and novel ADs based on these. Cryo-electron microscopy (cryo-EM) has enabled researchers to identify the structures of membrane receptors, including the N-methyl-D-aspartate receptor (NMDAR) and the 5-hydroxytryptamine 2A (5-HT2A) receptor. These high-resolution structures can be used for the development of novel ADs using virtual drug screening (VDS). Moreover, the unique antidepressant effects of 5-HT1A receptors in various brain regions, and the pivotal roles of the α-amino-3-hydroxy-5-methyl-4-isoxazolepropionic acid receptor (AMPAR) and tyrosine kinase receptor 2 (TrkB) in regulating synaptic plasticity, emphasize their potential as therapeutic targets. Using structural information, a series of highly selective ADs were designed based on the different role of receptors in MDD. These molecules have the favorable characteristics of rapid onset and low adverse drug reactions. This review offers researchers guidance and a methodological framework for the structure-based design of ADs. [ABSTRACT FROM AUTHOR]

Tuberculosis (TB), caused by Mycobacterium tuberculosis (Mtb) infection, remains one of the most threatening infectious diseases worldwide. A series of challenges still exist for TB prevention, diagnosis and treatment, which therefore require more attempts to clarify the pathological and immunological mechanisms in the development and progression of TB. Circular RNAs (circRNAs) are a large class of non-coding RNA, mostly expressed in eukaryotic cells, which are generated by the spliceosome through the back-splicing of linear RNAs. Accumulating studies have identified that circRNAs are widely involved in a variety of physiological and pathological processes, acting as the sponges or decoys for microRNAs and proteins, scaffold platforms for proteins, modulators for transcription and special templates for translation. Due to the stable and widely spread characteristics of circRNAs, they are expected to serve as promising prognostic/diagnostic biomarkers and therapeutic targets for diseases. In this review, we briefly describe the biogenesis, classification, detection technology and functions of circRNAs, and, in particular, outline the dynamic, and sometimes aberrant changes of circRNAs in TB. Moreover, we further summarize the recent progress of research linking circRNAs to TB-related pathogenetic processes, as well as the potential roles of circRNAs as diagnostic biomarkers and miRNAs sponges in the case of Mtb infection, which is expected to enhance our understanding of TB and provide some novel ideas about how to overcome the challenges associated TB in the future. [ABSTRACT FROM AUTHOR]

Living materials combine a material scaffold, that is often porous, with engineered cells that perform sensing, computing, and biosynthetic tasks. Designing such systems is difficult because little is known regarding signaling transport parameters in the material. Here, the development of a porous microplate is presented. Hydrogel barriers between wells have a porosity of 60% and a tortuosity factor of 1.6, allowing molecular diffusion between wells. The permeability of dyes, antibiotics, inducers, and quorum signals between wells were characterized. A "sentinel" strain was constructed by introducing orthogonal sensors into the genome of Escherichia coli MG1655 for IPTG, anhydrotetracycline, L‐arabinose, and four quorum signals. The strain's response to inducer diffusion through the wells was quantified up to 14 mm, and quorum and antibacterial signaling were measured over 16 h. Signaling distance is dictated by hydrogel adsorption, quantified using a linear finite element model that yields adsorption coefficients from 0 to 0.1 mol m−3. Parameters derived herein will aid the design of living materials for pathogen remediation, computation, and self‐organizing biofilms. Synopsis: Microbes interact by chemical diffusion through materials, a concept that inspires "engineered living materials". To parameterize signaling through materials, a porous culture microplate is fabricated to measure chemical signaling between isolated wells of engineered E. coli. A porous microplate is fabricated by soft lithography of the co‐polymer hydroxyethyl methacrylate‐co‐ethylene glycol dimethacrylate.Four homoserine lactone quorum sensors are evolved to minimize cross‐talk via directed evolution.Seven total orthogonal sensors are encoded into the genome of E. coli MG1655, which serves as a "sentinel strain."The biological response of the sentinel strain to inducer, quorum, and antibiotic signaling between isolated wells of the microplate are experimentally measured.A quantitative model is developed that explains the difference in transport kinetics of the various biological signals by differential absorption of the molecules to the hydrogel matrix. [ABSTRACT FROM AUTHOR]

Intracellular protein motors have evolved to perform specific tasks critical to the function of cells such as intracellular trafficking and cell division. Kinesin and dynein motors, for example, transport cargoes in living cells by walking along microtubules powered by adenosine triphosphate hydrolysis. These motors can make discrete 8 nm centre-of-mass steps and can travel over 1 µm by changing their conformations during the course of adenosine triphosphate binding, hydrolysis and product release. Inspired by such biological machines, synthetic analogues have been developed including self-assembled DNA walkers that can make stepwise movements on RNA/DNA substrates or can function as programmable assembly lines. Here, we show that motors based on RNA-cleaving DNA enzymes can transport nanoparticle cargoes-CdS nanocrystals in this case-along single-walled carbon nanotubes. Our motors extract chemical energy from RNA molecules decorated on the nanotubes and use that energy to fuel autonomous, processive walking through a series of conformational changes along the one-dimensional track. The walking is controllable and adapts to changes in the local environment, which allows us to remotely direct 'go' and 'stop' actions. The translocation of individual motors can be visualized in real time using the visible fluorescence of the cargo nanoparticle and the near-infared emission of the carbon-nanotube track. We observed unidirectional movements of the molecular motors over 3 µm with a translocation velocity on the order of 1 nm min−1 under our experimental conditions. [ABSTRACT FROM AUTHOR]

[Display omitted] • The in-situ gel of SPE ensures interface compatibility and scalable preparation. • InPc was conducive to improving ionic conductivity and suppressing shuttle effect. • InPc induces a protective layer on the surface of the lithium. • The resulting pouch Li-S cell delivered an energy density of 325.5 Wh kg−1. Lithium-sulfur batteries (LSBs) are currently being investigated as a potential candidate for high-energy–density rechargeable batteries. However, the notorious shuttle effect and uncontrolled dendrite growth posed problems for the practical applications of LSBs. Here, a new solid polymer electrolyte (SPE) was developed by in-situ polymerization of 1,3-dioxolane (DOL) in the presence of a multifunctional indium phthalocyanine (PDOL@InPc). The InPc endows the SPE with improved ionic conductivity and merit inhibition of the shuttle effect, in addition to being an effective additive for inducing uniform Li deposition by reconstructing the electric field at the interface. The characteristics of ionic migration in PDOL@InPc were quantified, and agreement between experiment and simulation established a relationship between macroscopic characteristics and molecular-level processes. The interfacial side reaction was controlled by the PDOL@InPc electrolyte, which also improved the distribution of the Li+ flux for dense Li deposition. Li symmetrical batteries designed with PDOL@lnPc can withstand a current density of up to 0.5 mA cm−2 and cycle reliably for 1500 h. The PDOL@InPc electrolyte displayed a high ionic conductivity at room temperature of 3.7 mS cm−1 and a significant Li+ transference number of 0.63. The resulting Li-S battery (Li|PDOL@lnPc|Sulfur) delivered a significant 325.5 Wh kg−1 of energy density at 0.2 C (1 C = 1000 mA g−1) at the level of the multilayer-pouch cell under an extremely low electrolyte of 3.5 g g−1 Sulfur and high loading of 8.0 mg cm−2. This work provides a feasible strategy for the widespread implementation of LSBs with increased safety and a longer lifetime. [ABSTRACT FROM AUTHOR]

Highly efficient synthesis of zeolites is an important goal given the many catalytic applications of zeolites in industrial chemical processes. The conventional zeolite syntheses, i.e., hydrothermal synthesis in a batch setup are usually challenged by certain limiting factors deriving from the long synthesis period or the low yield. Herein, we report that a combined strategy of organic promoter and zeolite seeding can remarkably improve the synthetic efficiency of high silica SSZ-13 zeolite. The low-cost promoter diethylamine (DEA) and zeolite seeds could both remarkably accelerate the crystallization rate of SSZ-13 zeolite, and DEA has a much higher beneficial effect on the solid yield as compared to the zeolite seeds. Consequently, the crystallization time could be unprecedentedly shorted by a factor of 30, instead of multiple days normally required. Besides, this novel protocol also exhibits high atom efficiency (93% of yield). The resultant high-silica nano-sized SSZ-13 zeolite shows good (hydro)thermal stability along with excellent catalytic performance for the MTO reaction. [Display omitted] • Synthetic efficiency of high-silica SSZ-13 zeolite was remarkably improved. • Cost-effective promoter and zeolite seeds were used in the synthesis gel. • Fast-synthesized SSZ-13 zeolite exhibits high crystallinity, high yield, small grain, and high stability. • Good performance in the MTO reaction; improved selectivity of light olefins. • Novel approach could be applied to the fast synthesis of other zeolite topologies. [ABSTRACT FROM AUTHOR]

DNA based synthetic molecular walkers are reminiscent of biological protein motors. They are powered by hybridization with fuel strands, environment induced conformational transitions, and covalent chemistry of oligonucleotides. Recent developments in experimental techniques enable direct observation of individual walkers with high temporal and spatial resolution. The functionalities of state-of-the-art DNA walker systems can thus be analyzed for various applications. Herein we review recent progress on DNA walker principles and characterization methods, and evaluate various aspects of their functions for future applications. [ABSTRACT FROM AUTHOR]