Search

Due to its favorable mechanical strength, transparency, and biocompatibility, polylactic acid (PLA) has considerable potential as a biodegradable material. Nevertheless, developing high‐performance PLA composites through environmentally friendly and cost‐effective methods remains a significant challenge. In this study, the composites comprising poly(L‐lactide) (PLLA), basalt fibers (BFs), and poly(D‐lactide) (PDLA) are prepared through facile melt blending. The in situ formed stereocomplex polylactide (SC‐PLA) crystals improve the crystallization ability and rheological behavior of PLLA/BF/PDLA composites. Upon adding 5 wt% PDLA, BFs are nicely dispersed in PLLA matrix because of increased shear intensity. The synergistic effect of BFs and SC‐PLA crystals enhances the mechanical, thermomechanical, and heat resistance properties of PLLA. In particular, PLLA/BF/10%PDLA composites exhibit a Vicat Softening Temperature (VST) of 155.5°C, increasing by approximately 100°C over neat PLLA. Annealing treatment increases the Young's modulus, thermomechanical properties, and VST of samples while reducing their tensile strength. Interestingly, the tensile strength of the annealed PLLA/BF/10%PDLA composites is 50.2 MPa, twice that of the annealed neat PLLA due to the introduction of SC‐PLA crystals. Simultaneously improving the rheological, mechanical, and heat resistance performance of PLLA opens possibilities for expanding its potential applications in the industrial field. [ABSTRACT FROM AUTHOR]

Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBH) has gained significant attention because of its biodegradability and sustainability. However, its expanded application in some fields is limited by the brittleness and low melt viscoelasticity. In this work, poly(vinyl acetate) (PVAc) was introduced into PHBH/poly(propylene carbonate) (PPC) blends via melt compounding with the aim of obtaining a good balance of properties. Dynamic mechanical analysis results suggested that PPC and PHBH were immiscible. PVAc was miscible with both a PHBH matrix and PPC phase, while it showed better miscibility with PHBH than with PPC. Therefore, PVAc was selectively localized in a PHBH matrix, reducing interfacial tension and refining dispersed phase morphology. The crystallization rate of PHBH slowed down, and the degree of crystallinity decreased with the introduction of PPC and PVAc. Moreover, the PVAc phase significantly improved the melt viscoelasticity of ternary blends. The most interesting result was that the remarkable enhancement of toughness for PHBH/PPC blends was obtained by adding PVAc without sacrificing the strength markedly. Compared with the PHBH/PPC blend, the elongation at the break and yield strength of the PHBH/PPC/10PVAc blend increased by 1145% and 7.9%, respectively. The combination of high melt viscoelasticity, toughness and strength is important for the promotion of the practical application of biological PHBH. [ABSTRACT FROM AUTHOR]

The longitudinal relaxation time (termed as T 1 ) of nitrogen-vacancy (NV) centers in nanodiamonds can be affected by surface electric or magnetic noise, which has been exploited to develop cutting-edge quantum relaxometry for biochemical sensing. In this work, a tiny all-fiber quantum probe based on longitudinal relaxometry was developed by chemically-anchoring nanodiamonds on the surface of a cone fiber tip. The dependences of T 1 on surface electric and magnetic noise were discussed in theories first and then experimentally demonstrated in varied pH and Gd 3+ concentration solutions, respectively. Because of NV centers being subject to enhanced coupling from surface noise, T 1 reduced from 290 to 245 µs when pH changed from 3 to 9 and reduced to 220 µs when Gd 3+ concentration increased to 10 mM, agreeing well with theoretical results. Based on these, the Gd 3+ -tagged-biotin and streptavidin model was designed and implemented on the all-fiber probe, and results demonstrated the detection of biotin with a limit of 168 nM and good specificity. This paper opens a new way to develop an all-fiber quantum probe by exploiting the unique electrical spin properties of NV centers, and the probe shows great potential for biological detection with high sensitivity and specificity.