Search

Dyslipidemia, a major risk factor for cardiovascular diseases (CVDs), is modifiable by diet and lifestyle changes. A large population with mild to moderate dyslipidemia is at risk of developing CVDs, and early initiation of preventive measures can avert advancing into severe medical conditions. Studies suggest increasing slowly digestible starch (SDS) in diets can help lower blood lipids. We processed dehulled adlay, a cereal rich in bioactive compounds, such as polyphenols and phytosterols, into an instant meal by extrusion and milling and then assessed its starch composition and in vitro digestibility. The dehulled adlay was found to consist of 32% SDS and resistant starch combined. Then, eligible subjects with dyslipidemia were recruited to explore the adlay’s hypolipidemic potential, safety, and acceptability. Subjects consumed the dehulled adlay as the sole carbohydrate source in their breakfast, without changing other components in the diet or lifestyle, for 12 weeks. After intervention, serum total cholesterol (TC) decreased significantly in subjects with hypercholesterolemia. In addition, both TC and triglyceride levels decreased significantly in those above 50 years old. In conclusion, the extruded dehulled adlay displays potential for favorably modulating blood lipids, and the effect is more pronounced in the middle-aged population.

Abstract The relationship between Helicobacter pylori infection and rheumatoid arthritis has been investigated, but the results remain controversial. This study aims to determine the association between the two diseases via a 17-year retrospective cohort study. Using the National Health Insurance Research Database, a nationwide population based in Taiwan, we identified 97,533 individuals with H. pylori infection and matched controls between 2000 and 2017 using propensity score matching at a 1:1 ratio. The adjusted hazard ratio of rheumatoid arthritis was determined by multiple Cox regression. The incidence rate of rheumatoid arthritis was 1.28 per 10,000 person-months in the H. pylori cohort, with a higher risk compared to the control group. In the

Abstract The most widely used method for intracellular RNA fluorescence labeling is MS2 labeling, which generally relies on the use of multiple protein labels targeted to multiple RNA (MS2) hairpin structures installed on the RNA of interest (ROI). While effective and conveniently applied in cell biology labs, the protein labels add significant mass to the bound RNA, which potentially impacts steric accessibility and native RNA biology. We have previously demonstrated that internal, genetically encoded, uridine-rich internal loops (URILs) comprised of four contiguous UU pairs (8 nt) in RNA may be targeted with minimal structural perturbation by triplex hybridization with 1 kD bifacial peptide nucleic acids (bPNAs). A URIL-targeting strategy for RNA and DNA tracking would avoid the use of cumbersome protein fusion labels and minimize structural alterations to the RNA of interest. Here we show that URIL-targeting fluorogenic bPNA probes in cell media can penetrate cell membranes and effectively label RNAs and RNPs in fixed and live cells. This method, which we call fluorogenic U-rich internal loop (FLURIL) tagging, was internally validated through the use of RNAs bearing both URIL and MS2 labeling sites. Notably, a direct comparison of CRISPR-dCas labeled genomic loci in live U2OS cells revealed that FLURIL-tagged gRNA yielded loci with signal to background up to 7X greater than loci targeted by guide RNA modified with an array of eight MS2 hairpins. Together, these data show that FLURIL tagging provides a versatile scope of intracellular RNA and DNA tracking while maintaining a light molecular footprint and compatibility with existing methods.

Nuclear chromosome compaction is non-random and dynamic. The spatial distance among genomic elements instantly modulates transcription. Visualization of the genome organization in the cell nucleus is essential to understand nuclear function. In addition to cell type-dependent organization, high-resolution 3D imaging shows heterogeneous compaction of chromatin organization among the same cell type. Questions remain to be answered if these structural variations were the snapshots of dynamic organization at different time points and if they are functionally different. Live-cell imaging has provided unique insights into dynamic genome organization at short (milliseconds) and long (hours) time scales. The recent development of CRISPR-based imaging opened windows for studying dynamic chromatin organization in single cells in real time. Here we highlight these CRISPR-based imaging techniques and discuss their advances and challenges as a powerful live-cell imaging method that poses high potential to generate paradigm-shifting discoveries and reveal functional implications of dynamic chromatin organization.

The purpose of this study was to explore college students’ purchase behaviors using a multivariate statistical model. Because many college students today have part-time jobs, they have increased opportunities to consume higher-quality brands. In Taiwan, Starbucks is regarded as a high-quality coffee brand, costing more than most local coffee brands. To clarify why such students in Taiwan are willing to pay more for Starbucks, data were collected from a sample of 402 college students. The results showed differences in purchase decisions between students majoring in different disciplines and lifestyles. The findings had theoretical and practical implications especially for the marketing strategy of the Taiwanese coffee industry.

This study proposes an assessment method to quantify the risks of the smoke environment for road tunnel fire safety based on previous studies. The assessment method integrates visibility and toxic gases to address the hazards of smoke distribution more comprehensively. Considering that the hazards of visibility reduction and toxic gases for tunnel users vary with exposure time and location in a fire event, the smoke environment (SE) levels are defined as a function of longitudinal location and time. The SE levels simplify smoke distribution as calculated from 3D computational fluid dynamics (CFDs). For easily identifying SE risks, SE levels are illustrated on a 2D map to analyze the potential hazard by quantifying specific areas and times of smoke exposure. To demonstrate the applicability of the assessment method of this study, cases are carried out using CFD simulation to investigate the risks associated with tunnel fires with various tunnel cross-section types, longitudinal velocities, and gradients. In the analysis of the SE level in different cross-section types and longitudinal velocities under the condition of no vehicle, a velocity of 0.9–1.1 m/s can maintain a less serious SE level both upstream and downstream in a horizontal rectangular tunnel, and 0.3–0.5 m/s in a horizontal horseshoe-shaped tunnel. Both rectangular and horseshoe-shaped tunnels reveal an obvious rise within 10–15 min. In the case of inclined tunnels, for both rectangular and horseshoe-shaped tunnels, the SE level near the fire source obviously deteriorates. Thus, the longitudinal velocity range for the purpose of maintaining a relatively less serious SE level should be slightly reduced for inclined tunnels compared with horizontal tunnels.

Japan and Europe have adopted significantly different ventilation modes with regard to traffic conditions (with or without congestion). This study focuses on the smoke behavior of different ventilation modes by conducting a 3D CFD analysis of smoke distribution and CO concentration variation and then comparing these modes based on two groups (relatively low target velocity: 0 and 1 m/s; relatively high target velocity: 2 and 3 m/s). The considered fire size is 30 MW for four longitudinal gradients (0, 2, 4, and 6%). In the simulation results, velocities of both 0 and 1 m/s reveal good performance in maintaining the stratification of smoke and ensuring the safety of the environment in 10 min in the occurrence of traffic jams. However, in 15 min, the smoke conditions change. Thus, it is difficult to distinguish which ventilation mode (0 and 1 m/s) shows relatively better performance during traffic congestion. When traffic is uncongested, the comparison of Um = 2 and 3 m/s reveals that a target velocity of Um = 2 m/s (lower than critical velocity) can also prevent the risk of smoke on the upstream side because no descending phenomenon is observed. Moreover, Um = 2 m/s causes the relatively slow propagation of descending smoke, increasing the possibility of evacuation once a second traffic incident occurs on the downstream side of the fire source.

In countries with a high motorbike utilization rate, road tunnels can feature motorbike lanes, bringing an additional risk to evacuation from tunnels during a fire or emergency. To better understand the walking speed in motorbike lanes to enhance risk assessment in tunnels, in the present study, we conducted evacuation experiments to investigate the influence of motorbike and evacuee density on the walking speed of motorbike users. According to the experimental results, the walking speed was slightly reduced even when the evacuee density was relatively lower (around 0.1 person/m2). To further analyze the influence of motorbikes in the lane, the walking speed decreased significantly with the increase in motorbike density. The decrease in walking speed presented an exponential relationship with evacuee and motorbike density. Considering this exponential relationship, nonlinear regression was applied to estimate the parameters of the walking speed model. The proposed model consisting of the evacuee density, motorbike density, and free walking speed as variables can serve as an approach to describe the walking speed of motorbike lane evacuation in tunnels.

Background: The Identification and Management of Feeding Difficulties (IMFeD™) tool was introduced in 2011 for management of children with feeding difficulties and has been used in various countries around the world. This study aimed to assess its acceptance and effectiveness in clinical practice in Taiwan. Methods: This was a prospective, observational, multicenter study where subjects were followed over 3 months. Outpatients identified as picky eaters, having poor appetite, poor weight gain, or weight loss were enrolled. The acceptance and effectiveness of IMFeD tool were evaluated by caregivers and pediatricians. Results: Among 423 children who completed the study (235 boys, 188 girls; 78.8% aged

An optical fiber sensing system integrating a fiber Bragg grating (FBG) sensor, a long-period fiber grating (LPFG) optical filter and a photodetector is presented to monitor the dynamic response of a structure subjected to base excitation and impact loading. The FBG sensor is attached to a test specimen and connected to an LPFG filter. As the light reflected from the FBG sensor is transmitted through the long-period fiber grating filter, the intensity of the light is modulated by the wavelength, which is affected by the strain of the FBG. By measuring the intensity of the light using a photodetector, the wavelength reflected from the FBG sensor can be demodulated, thus leading to the determination of the strain in the structure. To demonstrate its effectiveness, the proposed sensing system was employed to measure the dynamic strain of a beam subjected to mechanical testing. The mechanical tests comprised three load scenarios: base excitation by a shaker at resonant frequency, impact loading by a hammer and shock test on a drop table. To monitor the dynamic strain during the test and validate the accuracy of the measurement of the FBG sensor, strain gauge was used as reference. Experimental results show good correlation between the measurements of FBG sensor and strain gauge. The present work provides a fast response and easy-to-implement optical fiber sensing system for structural health monitoring based on real-time dynamic strain measurements.