Search

In this paper, synthetically scaled-up degenerately n-type doped indium tin oxide (Sn:In2O3) nanocrystals are described as highly transparent conductive materials possessing both optoelectronic and crystalline properties. With tin dopants serving as n-type semiconductor materials, they can generate free-electron carriers. These free electrons, vibrating in resonance with infrared radiation, induce strong localized surface plasmon resonance (LSPR), resulting in efficient infrared absorption. To commercialize products featuring Sn:In2O3 with localized surface plasmon resonance, a scaled-up synthetic process is essential. To reduce the cost of raw materials during synthesis, we aim to proceed with synthesis in a large reactor using industrial raw materials. Sn:In2O3 can be formulated into ink dispersed in solvents. Infrared-absorbing ink formulations can capitalize on their infrared absorption properties to render opaque in the infrared spectrum while remaining transparent in the visible light spectrum. The ink can serve as a security ink material visible only through infrared cameras and as a paint absorbing infrared light. We verified the transparency and infrared absorption properties of the ink produced in this study, demonstrating consistent characteristics in scaled-up synthesis. Due to potential applications requiring infrared absorption properties, it holds significant promise as a robust platform material in various fields. [ABSTRACT FROM AUTHOR]

We report dopant-induced complex hierarchical shell growth in metal oxide nanocrystal cubes, leading to a high-density infrared near-field localized surface plasmonic resonance (LSPR) response per film area with an interparticle 41.25% film porosity. We synthesize electromagnetically porous infrared plasmonic nanocrystals via hierarchical cube-on-cube surface growth in highly aliovalently doped semiconductor nanocrystals. In indium oxide colloidal nanocrystal systems, under low Sn dopant, we observe uniform Frank–van der Merwe type shelling. While exceeding 4% Sn atomic dopant, excessive Sn on (400) nanocrystalline achieves a Volmer–Weber island formation-type growth. Through surface XPS analysis, we exclude Stranski–Krastanov-type growth, an intermediary between uniform and island surface growth. Through complex hierarchical shapes in infrared plasmonic semiconductor nanocrystal surfaces, infrared range optical extinction is observed around the 2500 nm wavelength. Direct electromagnetic near-field was imaged through the infrared STEM-EELS electron microscopy technique in single nanocrystals. Due to the intrinsic interparticle gap under monolayer film architecture, electromagnetically dense near-field plasmonic response was directly observed via STEM-EELS. [ABSTRACT FROM AUTHOR]

Nanoscale hyperspectral techniques—such as electron energy loss spectroscopy (EELS)—are critical to understand the optical response in plasmonic nanostructures, but as systems become increasingly complex, the required sampling density and acquisition times become prohibitive for instrumental and specimen stability. As a result, there has been a recent push for new experimental methodologies that can provide comprehensive information about a complex system, while significantly reducing the duration of the experiment. Here, we present a pan-sharpening approach to hyperspectral EELS analysis, where we acquire two datasets from the same region (one with high spatial resolution and one with high spectral fidelity) and combine them to achieve a single dataset with the beneficial properties of both. This work outlines a straightforward, reproducible pathway to reduced experiment times and higher signal-to-noise ratios, while retaining the relevant physical parameters of the plasmonic response, and is generally applicable to a wide range of spectroscopy modalities. [ABSTRACT FROM AUTHOR]

This work reports on the photocatalytic activity of tin oxide (SnO2)-doped magnesium (Mg) and fluorine (F) nanoparticles for methyl orange and safranin dye degradation under sunlight irradiation. Nanocatalysis-induced dye degradation was examined using UV–visible spectroscopy and a pseudo-first-order kinetics model. The results indicate that the prepared nanoparticles exhibit superior photocatalytic activity, and the degradation of methyl orange (MO) dye is approximately 82%. In contrast, the degradation of safranin dye is 96% in the same time interval of 105 min. The calculated crystallite size of the SnO2–Mg–F nanocomposite is 29.5 nm, which respects the particle size found in the DLS analysis with a tetragonal structure and spherical morphology affirmed. The optical characteristics were assessed, and their respective bandgap energies were determined to be 3.6 eV. The influence of F in Mg and SnO2 is recognized with the XRD and FT-IR spectra of the prepared particles. [ABSTRACT FROM AUTHOR]

A synthetic challenge in faceted metal oxide nanocrystals (NCs) is realizing tunable localized surface plasmon resonance (LSPR) near-field response in the infrared (IR). Cube-shaped nanoparticles of noble metals exhibit LSPR spectral tunability limited to visible spectral range. Here, we describe the colloidal synthesis of fluorine, tin codoped indium oxide (F,Sn:In2O3) NC cubes with tunable IR range LSPR for around 10 nm particle sizes. Free carrier concentration is tuned through controlled Sn dopant incorporation, where Sn is an aliovalent n-type dopant in the In2O3 lattice. F shapes the NC morphology into cubes by functioning as a surfactant on the {100} crystallographic facets. Cube shaped F,Sn:In2O3 NCs exhibit narrow, shape-dependent multimodal LSPR due to corner, edge, and face centered modes. Monolayer NC arrays are fabricated through a liquid-air interface assembly, further demonstrating tunable LSPR response as NC film nanocavities that can heighten near-field enhancement (NFE). The tunable F,Sn:In2O3 NC near-field is coupled with PbS quantum dots, via the Purcell effect. The detuning frequency between the nanocavity and exciton is varied, resulting in IR near-field dependent enhanced exciton lifetime decay. LSPR near-field tunability is directly visualized through IR range scanning transmission electron microscopy-electron energy loss spectroscopy (STEM-EELS). STEM-EELS mapping of the spatially confined near-field in the F,Sn:In2O3 NC array interparticle gap demonstrates elevated NFE tunability in the arrays. [ABSTRACT FROM AUTHOR]

Rhenium (+6) oxide (ReO 3 ) is metallic in nature, which means it can sustain localized surface plasmon resonance (LSPR) in its nanocrystalline form. Herein, we describe the colloidal synthesis of nanocrystals (NCs) of this compound, through a hot-injection route entailing the reduction of rhenium (+7) oxide with a long chain ether. This synthetic protocol is fundamentally different from the more widely employed nucleophilic lysing of metal alkylcarboxylates for other metal oxide NCs. Owing to this difference, the NC surfaces are populated by ether molecules through an L-type coordination along with covalently bound (X-type) hydroxyl moieties, which enables easy switching from nonpolar to polar solvents without resorting to cumbersome ligand exchange procedures. These as-synthesized NCs exhibit absorption bands at around 590 nm (∼2.1 eV) and 410 nm (∼3 eV), which were respectively ascribed to their LSPR and interband absorptions by Mie theory simulations and Drude modeling. The LSPR response arises from the oscillation of free electron density created by the extra Re d-electron per ReO 3 unit in the NC lattice, which resides in the conduction band. Further, the LSPR contribution facilitates the observation of dynamic optical modulation of the NC films as they undergo progressive electrochemical charging via ion (de)insertion. Ion (de)insertion leads to distinct dynamic optical signatures, and these changes are reversible in a wide potential range depending on the choice of the ion (lithium or tetrabutylammonium). Nanostructuring in ReO 3 and the description of the associated plasmonic properties of these NCs made this optical modulation feasible, which were hitherto not reported for the bulk material. We envisage that the synthetic protocol described here will facilitate further exploration of such applications and fundamental studies of these plasmonic NCs.