Search

Perovskite solar cells have drawn much attention in recent years, owing to its world-record setting photovoltaic performances. Despite its promising use in tandem applications and flexible devices, its practicality is still limited by its structural instability often arising from ion migration and defect formation. While it is generally understood that ion instability is a primary cause for degradation, there is still a lack of direct evidence of structural transformation at the atomistic scale. Such an understanding is crucial to evaluate and pin-point how such instabilities are induced relative to external perturbations such as illumination or electrical bias with time, allowing researchers to devise effective strategies to mitigate them. Here, we designed an in-situ TEM setup to enable real-time observation of amorphization in double cation mixed perovskite materials under electrical biasing at 1 V. It is found that amorphization occurs along the (001) and (002) planes, which represents the observation of in-situ facet-dependent amorphization of a perovskite crystal. To reverse the degradation, the samples were heated at 50 oC and was found to recrystallize, effectively regaining its performance losses. This work is vital toward understanding fundamental ion-migration phenomena and address instability challenges of perovskite optoelectronics.

The current utmost challenge for commercialization of perovskite solar cells is to ensure long-term operation stability. Here, we developed the pulsatile therapy which can prolong device lifetime by addressing accumulation of both charges and ions in the middle of maximum power point tracking (MPPT). In the technique, reverse biases are repeatedly applied for a very short time without any pause of operation, leading to stabilization of the working device. The observed efficacies of our pulsatile therapy are delaying irreversible degradation as well as restoring degraded photocurrent during MPPT operation. We suggest an integrated mechanism underlying the therapy, in which harmful deep-level defects can be prevented to form and already formed defects can be cured by driving charge-state transition. We demonstrated the therapy to maintain defect-tolerance continuously, leading to outstanding improvement of lifetime and harvesting power. The unique technique will open up new possibility to commercialize perovskite materials into a real market.

Perovskite solar cells (PSCs) have shown remarkably improved power-conversion efficiency of around 25%. However, their working principle remains arguable and the stability issue has not been solved yet. In this report, we revealed that the working mechanism of PSCs is explained by a dominant pn junction occurring at the different interface depending on electron transport layer, and charges are accumulated at the corresponding dominant junction initiating device degradation. Locations of a dominant pn junction, the electric field, and carrier-density distribution with respect to electron-transport layers in the PCS devices were investigated by using the electron-beam-induced current measurement and Kelvin probe force microscopy. The amount of accumulated charges in the devices was analyzed using the charge-extraction method and the degradation process of devices was confirmed by SEM measurements. From these observations, we identified that the dominant pn junction appears at the interface where the degree of band bending is higher compared to the other interface, and charges are accumulated at the corresponding junction where the device degradation is initiated, which suggests that there exists a strong correlation between PSC working principle and device degradation. We highlight that an ideal pin PSC that can minimize the degree of band bending should be designed for ensuring long-term stability, via using proper selective contacts

Synthesizing unconventional alloys remains challenging owing to seamless interactions between kinetics and thermodynamics. High entropy alloys (HEAs), for example, draw a fundamentally new concept to enable exploring unknown regions in phase diagrams. The exploration, however, is hindered by traditional metallurgies based on liquid-solid transformation. Vapor-solid transformation that is permissible on pressure-temperature phase diagrams, offers the most kinetically efficient pathway to form any desired alloy (e.g., HEA). Here, we report that a technique called "sparking mashups", which involves a rapidly quenched vapor source and induces unrestricted mixing for alloying 55 distinct types of ultrasmall nanoparticles (NPs) with controllable compositions. Unlike the precursor feed in wet chemistry, a microseconds-long oscillatory spark controls the vapour composition, which is eventually retained in the alloy NPs. The resulting NPs range from binary to HEAs with marked thermal stability at room temperature. We show that a nanosize-effect ensures such thermal stability and mimics the role of mixing entropy in HEAs. This discovery contradicts the traditional "smaller is less stable" view while enabling the elemental combinations that have never been alloyed to date. We even break the miscibility limits by mixing bulk-immiscible systems in alloy NPs. As powerful examples, we demonstrate the alloy NPs as both high-performance fuel-cell catalysts and building blocks for three-dimensional (3D) nanoprinting to construct HEA nanostructure arrays of various architectures and compositions. Our results form the basis of new rules for guiding HEA-NP synthesis and advancing catalysis and 3D printing to new frontiers.

We propose a novel cantilever device integrated with a polydimethylsiloxane (PDMS)-encapsulated crack sensor that directly measures the cardiac contractility. The crack sensor was chemically bonded to a PDMS thin layer to form a sandwiched structure which allows to be operated very stably in culture media. The reliability of the proposed crack sensor has improved dramatically compared to no encapsulation layer. After evaluating the durability of the crack sensor bonded with the PDMS layer, cardiomyocytes were cultured on the nano-patterned cantilever for real-time measurement of cardiac contractile forces. The highly sensitive crack sensor continuously measured the cardiac contractility without changing its gauge factor for up to 26 days (>5 million heartbeats). In addition, changes in contractile force induced by drugs were monitored using the crack sensor-integrated cantilever. Finally, experimental results were compared with those obtained via conventional electrophysiological methods to verify the feasibility of building a contraction-based drug-toxicity testing system.

A powerful and flexible method of 3D nano-printing, based on focusing charged aerosol, has been developed. The self-consistent electric field configuration, created with a holey floating mask and used as the scaffold for printing structures, has no restriction as to sizes down to nano-scale. The electric field line is used as a writing tool. Broad material independence opens the way for producing hybrid structures that are essential for electronic devices. The method contains three modes which are complementary: controlled tip-directed 3D-growth printing, the writing mode (that can also produce 3D structures in repeating passages), and the stencil mode that produces wall-like structures of various shapes. Manipulating them gives freedom to manufacture complex 3D designs that we report. The desired morphology of the grown structures is controlled according to a simple phenomenological theory that helps organize the 2D stage motion and the 3D printing process to compete with the 3D printing provided by laser techniques in polymer based material.

Despite soaring performance of organic-inorganic hybrid perovskite materials in recent years, the mechanism of their decomposition at actual operation condition has been elusive. Herein, we elucidated the decrystallization process of CH3NH3PbI3 perovskite crystals via localized charges and identified polarity-dependent degradation pathway by carrying out time-evolution measurements for absorption spectra of perovskite films with underlying different charge transport layers and ab initio molecular dynamics calculations. It was found that the carrier polarity (hole-rich or electron-rich) inside the perovskite films played a critical role in the degradation rate, and polarity-dependent degradation pathway strongly depended on the combination of surrounding gaseous molecules. The hole-rich perovskite films degraded more rapidly in the existence of H2O than the electron-rich one, while the degradation trend became opposite in only-oxygen ambient. Strikingly, the hole-rich one was extremely weak to atmospheric air containing both H2O and O2, whereas the MAPbI3 film with excessive electrons rather stabilized in air. Ab initio molecular dynamics (AIMD) simulation was also done to find the detailed degradation pathway of MAPbI3 under atmosphere for different polarity of localized charge, which are in good agreement with experimental results. Furthermore, X-ray assisted spectroscopic measurements confirmed the production of Pb(OH)I as predicted from the simulation result.

It is unmistakably paradoxical that the weakest point of the photoactive organic-inorganic hybrid perovskite is its instability against light. Why and how perovskites break down under light irradiation and what happens at the atomistic level during the degradation still remains unanswered. In this paper, we revealed the fundamental origin and mechanism for irreversible degradation of hybrid perovskite materials from our new experimental results and ab initio molecular dynamics (AIMD) simulations. We found that the photo-generated charges trapped along the grain boundaries of the perovskite crystal result in oxygen-induced irreversible degradation in air even in the absence of moisture. The present result, together with our previous experimental finding on the same critical role of trapped charges in the perovskite degradation under moisture, suggests that the trapped charges are the main culprit in both the oxygen- and moisture-induced degradation of perovskite materials. More detailed roles of oxygen and water molecules were investigated by tracking the atomic motions of the oxygen- or water-covered CH3NH3PbI3(MAPbI3) perovskite crystal surface with trapped charges via AIMD simulation. In the first few picoseconds of our simulation, trapped charges start disrupting the crystal structure, leading to a close-range interaction between oxygen or water molecules and the compositional ions of MAPbI3. We found that there are different degradation pathways depending on both the polarity of the trapped charge and the kind of gas molecule. Especially, the deprotonation of organic cations was theoretically predicted for the first time in the presence of trapped anionic charges and water molecules. We confirmed that a more structurally stable, multi-component perovskite material(MA0.6FA0.4PbI2.9Br0.1) exhibited a much longer lifespan than MAPbI3 under light irradiation even in 100% oxygen ambience., Comment: 30 pages, 5 main figures, 7 supplementary figures, 1 supplementary table

Mn2+ ion doping is used as an electron paramagnetic resonance (EPR) probe to investigate the influence of low-coordination structural defects such as step edges at the surface of terraced (001) MgO nanoparticles on the electronic properties. Beside the well-known hyperfine sextet of Mn2+ ions in the cubic crystal field of MgO, an additional EPR feature with a striking non-monotonous temperature dependent shift of the g-factor is observed in terraced nanoparticles in the temperature range from 4K to room temperature. By linking the difference in the temperature dependence of the Mn2+ sextet intensity in cubic and terraced nanoparticles with the possible s-d exchange shift and enhanced Zeeman splitting we conclude that the novel EPR feature originates from the loosely trapped charge-compensating carriers at the abundant structural defects at the surface of terraced nanoparticles due to their exchange interaction with neighboring Mn2+ ions., Comment: 13 pages, 4 figures

Perovskite solar cells have shown fast deterioration during actual operation even with encapsulation, but its mechanism has been elusive. We found the fundamental mechanism for irreversible degradation of perovskite materials in which trapped charges regardless of the polarity play a decisive role. A novel experimental setup utilizing different polarity ions revealed that the moisture induced irreversible dissociation of perovskite materials is triggered by charges trapped along grain boundaries. Our finding clearly explained the intriguing observations why light soaking induces irreversible degradation while in the dark, moisture only causes reversible hydration, and why degradation begins from different side of interface for different charge extraction layers. The deprotonation of organic cations by trapped charge induced local electric field is attributed to the initiation of irreversible decomposition.

When Mg metal burns in air the resulting rock-salt MgO smoke consists of perfect [100] cubes of about 100 nm. On contrast, we found that intensification of self-burning of Mg micropowder either by injecting it into oxy-hydrogen diffusion flame or under an infrared laser beam switches the growth mechanism producing mostly single-crystalline spheres and terraced nanoparticles. MgO molecule condensation onto primary spherical nanoparticles can account for generation of terraced nanoparticles with regular steps proportional to the nanoparticle size., Comment: 16 pages, 5 figures

Electronic control of blackbody emission from graphene plasmonic resonators on a silicon nitride substrate is demonstrated at temperatures up to 250 C. It is shown that the graphene resonators produce antenna-coupled blackbody radiation, manifest as narrow spectral emission peaks in the mid-IR. By continuously varying the nanoresonators carrier density, the frequency and intensity of these spectral features can be modulated via an electrostatic gate. We describe these phenomena as plasmonically enhanced radiative emission originating both from loss channels associated with plasmon decay in the graphene sheet and from vibrational modes in the SiNx., Comment: 17 pages, 6 figures

Enhancing the interaction strength between graphene and light is an important objective for those seeking to make graphene a relevant material for future optoelectronic applications. Plasmonic modes in graphene offer an additional pathway of directing optical energy into the graphene sheet, while at the same time displaying dramatically small optical confinement factors that make them an interesting means of coupling light to atomic or molecular emitters. Here we show that graphene plasmonic nanoresonators can be placed a quarter wavelength from a reflecting surface and electronically tuned to mimic a surface with an impedance closely matched to freespace (Z0 = 377{\Omega}). This geometry - known in early radar applications as a Salisbury screen - allows for an order of magnitude (from 2.3 to 24.5%) increase of the optical absorption in the graphene and provides an efficient means of coupling to the highly confined graphene plasmonic modes.

It has been a challenge to make seven straight round cylinders mutually touch before our now 10-year old discovery [Phys. Rev. Lett. 93, 015505 (2004)] of configurations of seven mutually touching infinitely long round cylinders (then coined 7-knots). Because of the current interest in string-like objects and entanglement which occur in many fields of Physics it is useful to find a simple way to treat ensembles of straight infinite cylinders. Here we propose a treatment with a chirality matrix. By comparing 7-knot with variable radii with the one where all cylinders are of equal radii (here 7*-knot, which for the first time appeared in [phys. stat. solidi, b 246, 2098 (2009)]), we show that the reduction of 7-knot with a set of non-equal cylinder radii to 7*-knot of equal radii is possible only for one topologically unique configuration, all other 7-knots being of different topology. We found novel configurations for mutually touching infinitely long round cylinders when their numbers are eight and ultimately nine (here coined 8-knots and 9-knots). Unlike the case of 7-knot, where one angular parameter (for a given set of fixed radii) may change by sweeping a scissor angle between two chosen cylinders, in case of 8- and 9-knots their degrees of freedom are completely exhausted by mutual touching so that their configurations are "frozen" for each given set of radii. For 8-knot the radii of any six cylinders may be changeable (for example, all taken equal) while two remaining are uniquely determined by the others. We show that 9-knot makes the ultimate configuration where only three cylinders can have changeable radii and the remaining six are determined by the three. Possible generalizations and connection with Physics are mentioned., Comment: 18 pages, 9 figures, 1 table

We show that multiple-photon absorption of radiation from a 10.56 {\mu}m cw CO2 laser by intermediates (ethylene, vinylidene) generated in pure acetylene flow makes them decompose to carbon dimers and excited hydrogen. The latter associates with downstream acetylene to feedback those laser absorbing intermediates thus making the reactions self-sustained in the absence of oxygen. This process is different from acetylene self-decomposition that may occur at higher temperature and pressure. The results of our work may be useful for understanding the generation of various carbon allotropes and interstellar dust from acetylene.