Search

This paper addresses the problem of road safety regarding barrier placement as relative to the curb. A short summary of existing regulations is presented. Numerical simulations using the explicit finite element system Ls-Dyna are shown. In the analysis, variable distance between the barrier and the curb is assumed. The obtained result reveals that the distance has little impact on the working width of the barrier.

The paper presents proposals for the use of glass fiber reinforced polymer composites for the construction of engineering objects, known and commonly used in the shipbuilding industry. An example of a pedestrian footbridge was used in this case, which, despite the considerable thickness of the structural material, was made using infusion technology in one production cycle. The designed and produced footbridge span is durable, dynamically resistant, incombustible, easy to install and maintain, resistant to weather conditions and also aesthetically interesting. For footbridge production environmentally friendly PET foam core may be used. It may come from recycling of used plastic packages and which is produced with less energy consumption process and much less CO2 emission. The load bearing part of the structure (skin) is made of polymer laminate reinforced with glass fabrics (GFRP).

The paper analyses possible causes of failure of the rotating footbridge over the Ustka port channel. In July, 2015, strange behaviour of this object was observed in the form of excessive vibrations of bridge platform suspension rods, with the accompanying acoustic effects. A preliminary geotechnical analysis has revealed that this destructive effect was caused by the nearby construction works, namely construction of a fishing basin and communication routes in the area close to the bridge, which affected the bridge lashing rod foundation settings. Ground vibrations generated by certain construction activities were likely to have direct impact on decreasing the bearing capacity of these rods and increasing the susceptibility od the piles to extraction. After detecting the above problems in bridge operation, its geodetic monitoring was started. The data recorded during this monitoring, along with the results of force measurements in the rods, have made the basis for a series of numerical simulations, performed in the Finite Element Method (FEM) formalism. The bridge structure was analysed in the conditions defined as the emergency state. Extreme efforts of bridge elements and its dynamic characteristics were examined. A possible source of strange behaviour of the footbridge during its operation which was recognised during these simulations was the coincidence of the global natural frequency of the entire bridge structure with local vibrations of suspension rods, at the frequency approximately equal to 1 Hz. This situation was likely to lead to the appearance of the so-called internal resonance phenomenon. As a final conclusion of the research, recommendations were formulated on possible object oriented corrective actions.

The paper presents experiences gained during work with numerical model of Geo Metro vehicle used for simulations of crash tests with road safety barriers. Attention is drawn to the subject of tire/wheel breakage during collision events. Some methods for improvement of the model are presented in the paper. Several results for the normative vehicle numerical tests are introduced. Simulations were carried out using LS-DYNA finite element code with solver version R8.1.

Experimental dynamic tests and numerical simulations of a 3 meters long segment of a footbridge made of polymer composites are presented in the paper. The span-length is reduced, however dimensions of cross-section are the same as the target footbridge. The segment structure is made of sandwich panels, which consist of fibre reinforced polymer (GFRP) laminates (skins) and a PET foam (core). The first part of the paper contains description and results of experimental dynamic tests, which were subjected to the structure. The excitations during these tests was realised by a group of people standing or jumping on the structure deck. The obtained results allowed to determine natural frequencies as well as damping ratios. Moreover, cyclic loading was applied to the structure deck to check the possibility of delamination or debonding occurrence, as a result of repetitive dynamic excitations. The second part contains validation of numerical model - results of numerical analysis and its comparison with the experimental ones.

Damages of spans of the overpass caused by impact of underpassing vehicles are relatively frequent. Objects that use prefabricated load-bearing elements that are not designed for such impacts are particularly exposed. After impact, such structural elements suffer extensive damage that must be repaired. Taking advantages of this recovery actions it is worth to perform strengthening that will protect object against possible future impacts. In this study the influence of the structural strengthening of the damaged overpass on its strength parameters is investigated. For this purpose the advanced computational model was created. The numerical model includes the response of the reinforcement and prestressing tendons. This model enables precise description of damage caused due to the vehicle‘s impact and further analysis of re-impact of the strengthened structure.

Road safety barriers are used to increase safety in potentially dangerous places on the roads. They are designed and installed on the roads to prevent any vehicle from getting outside the travelled way or from entering the opposite lane of the road. Barriers, which are used on European roads, have to undergo full scale crash tests according to the EN 1317 standards. Nowadays as a supplement to real crash tests, numerical simulations are commonly used. The work concerns the influence of position of the post or its absence on the crashworthiness of the cable barrier based on numerical study results.

The subject of this study is performance of N2/W4/A steel road safety barrier investigated in numerical simulations. System was checked under several types of initial conditions, which were assumed basing on the TB11 and TB32 normative crash tests. The main goal of present study is to investigate the relationship between initial conditions (angle and velocity) of the impact and the severity indices (associated to the vehicle occupant) during the collision. Obtained performance parameters and impact severity indexes may be considered reasonable. Results of the simulations facilitates the deep insight into vehicle crash mechanics phenomena.

The paper concerns with the analysis of normative requirements pertaining to experimental setup of a crash test and its numerical modelling. An overview of parameters describing the collision of a vehicle with a road restraining system is presented. A short description of a concrete road safety barrier is presented. A brief description of numerical modelling procedures for crash tests is given as well. The parametric influence analysis is performed of the acceleration recording time on various crash test functionality parameters The simulations are carried out using LS-DYNA finite element code with a solver version R.8.1

The purpose of this article is to show the modern engineering, in which sustainability and taking care of ecology play a significant role. The authors are focused on FRP composite materials and their applications in civil engineering. Case studies showing renovation and design of new bridges with the use of FRP are presented and discussed to clarify benefits, which this solution provides. Main advantages of FRP materials in comparison with traditional ones, like concrete or steel are showed. The environmental impact of composites is described with respect to all life cycle of a product. Furthermore, some forms of waste management are covered. Last part of the paper refers to scientific description of the pedestrian bridge made of FRP, which was realized under the Fobridge research grant. The group of researchers headed by professor Chróścielewski from Gdansk University of Technology has developed a design solution of the pedestrian bridge manufactured in one production cycle. Moreover, the footbridge construction contains a significant share of a recyclable material commonly called PET. The article contains main characteristics of the structure and production process based on the resin infusion.

Horizontal curves are one of the elements of road infrastructure where statistically a relatively high number of accidents have been reported. In the last 10 years in Poland, approximately 10% of all road accidents happened on horizontal curves of roads and was responsible for approximately 14% of all fatalities on Polish roads. Thus, this issue is important and requires extensive research and proper road safety treatments. One possible measure that may contribute to improvement of safety on road curves may be barriers. The purpose of this work is to assess, with use of numerical simulations, the performance of the 4-cable barrier systems installed on horizontal road convex curves. The most important parameters for road safety barriers are presented including the effect of various impact velocities and the radiuses of the road curves. [ABSTRACT FROM AUTHOR]