Search

When the drilling and blasting method is used to excavate urban subway tunnels, the blasting seismic waves will inevitably produce vibration effects on the pile foundations under the surface buildings, which will seriously threaten the safety of surrounding buildings and the environment. Based on the transmission and reflection laws of stress waves at the interface between soil medium and pile medium and the displacement–stress continuous assumption, the wave function expansion method is used to analyze the whole process mechanism of vibration effect of hollow pipe piles under the action of incident P waves. In addition, the theoretical model of safety criterion for hollow pipe piles under blasting vibration is proposed and the reliability of the model is verified. Furthermore, the impacts of the elastic modulus, density, and pile section parameters of soil and piles on the safety criterion for the blasting vibration effect of hollow pipe piles are analyzed. The results show that as the elastic modulus and density of the soil increase, the critical peak particle velocity (PPV) curves of hollow pipe piles move to the high-frequency and low-frequency bands, respectively, resulting in a decrease in the overall safety of piles. This indicates that hollow pipe piles should not be buried in soil layers with high elastic modulus and density. It is also shown that the larger the hollow area of hollow pipe piles, the lower their safety. Compared to solid circular piles, hollow pipe piles have a higher overall seismic safety reserve. The study results have guidance and reference value for effectively evaluating and controlling the harm of blasting vibration effects of hollow pipe piles. [ABSTRACT FROM AUTHOR]

High-pressure gas (HPG) blasting is safe and environmentally friendly, and has replaced traditional explosive blasting in some applications. The characteristics of HPG impact load and the propagation law of the stress wave in layered rock mass (LRM) under HPG blasting were investigated experimentally and numerically. Through experimental tests of hole wall pressure, a segmented exponential model of the hole wall pressure under the impact of HPG was developed; it accurately accounted for the time history characteristics of the hole wall load. Experimental tests of stress wave propagation were conducted; the soft rock–hard rock interface was found to have a significant effect on stress wave propagation in the LRM. Based on the experimental results, a specific strain model for 10 MPa HPG impact was fitted for a single-hole LRM. A polynomial exponential model and a specific strain model (20 MPa HPG impact) were found for the double-hole LRM. The stress wave attenuation laws for single-hole and double-hole LRM were characterised well. The propagation characteristics of stress waves in LRM under the impact of HPG were analysed and a numerical model of stress wave propagation was established. The numerical model adopted the Riedel–Hiermater–Thoma (RHT) material model for the test parameters. The proposed segmented exponential models of hole wall pressure were applied to the lower, middle and upper parts of the blasthole. With the feasibility of the numerical model analysed, the stress wave propagation characteristics were studied by numerical simulation of an underground pipe gallery. This study provides theoretical guidance and practical value for improving rock-breaking theory and optimising HPG blasting in LRM. [ABSTRACT FROM AUTHOR]

When an explosive column initiates, it will radiate P‐SV waves. The propagation of P‐SV waves, which carry the majority of the explosion energy, is extremely complex in jointed rock masses. Therefore, studying the propagation of blasting stress waves in jointed rock masses is of great significance for optimizing the parameters of the blastholes and improving the economy and safety of geotechnical engineering construction. In this study, an analytical model of the propagation of P‐SV waves radiated by explosive columns in jointed rock masses is derived. Using this analytical model, the maximum displacement distribution in jointed rock masses with the free surface is analyzed, and the results show: (1) when the stress waves propagate to the free surface, the reflected waves will be generated, which will produce the remarkable superposition effect with the direct waves, while the superposition effect will affect the maximum displacements at the measuring points significantly; (2) the amplitude of transmitted waves generated from the stress waves that propagate through the rock joints is smaller than that of direct waves, thus the maximum displacements at the measuring points are affected by the rock joints within a certain range; (3) the velocity of detonation (VOD) and the length of the explosive column can affect the superposition effect of stress waves, ultimately impacting the maximum displacement distribution in jointed rock masses. Therefore, optimizing the parameters of the blastholes reasonably to achieve the optimal superposition of stress waves is of great significance for improving the construction efficiency of geotechnical engineering. [ABSTRACT FROM AUTHOR]