Search

Recently, in Paris, the world has reached an agreement whereby many countries commit to bolster their efforts about reducing adverse climate changes. Hence, we can expect that decarbonization will even attract more attention in different energy sectors in near future. In particular, both generation side and consumption side are required to be run more congruently and environmentally friendly. Thus, employing the renewables at the generation side along with our proposed decarbonized demand response (DDR) at the consumption side could significantly reduce deleterious impacts on the climate. Such ambition, at the consumption side, necessitates symbiosis and synergy between the customers and the retailer, and among customers, respectively. In other words, there should be some incentive-based collaboration between customers and the retailer as well as coordination among customers to make the objective be achieved successfully. In this paper, we present such matching demand response (DR) algorithm for residential users owning vehicle-to-grid (V2G) enabled plug-in electric vehicles (PEVs) who obtain electricity from a common retailer. The retailer itself is connected to the wholesale electricity market to purchase and sell electricity. Furthermore, we explain the details of the existing symbiosis and synergy in our system. Our simulation results illustrate that substantial cost savings can be achieved along with pollution reduction by our proposed technique., Comment: arXiv admin note: text overlap with arXiv:1505.06505, arXiv:1512.06600

Flexibility in power demand, diverse usage patterns and storage capability of plug-in electric vehicles (PEVs) grow the elasticity of residential electricity demand remarkably. This elasticity can be utilized to form the daily aggregated demand profile and/or alter instantaneous demand of a system wherein a large number of residential PEVs share one electricity retailer or an aggregator. In this paper, we propose a demand response (DR) technique to manage vehicle-to-grid (V2G) enabled PEVs' electricity assignments (charging and discharging) in order to reduce the overall electricity procurement costs for a retailer bidding to a two-settlement electricity market, i.e., a day-ahead (DA) and a spot or real-time (RT) market. We show that our approach is decentralized, scalable, fast converging and does not violate users' privacy. Extensive simulations show significant overall cost savings can be achieved for a retailer bidding to an operational electricity market by using the proposed algorithm. This technique becomes more needful when the power grid accommodates a large number of intermittent energy resources wherein RT demand altering is crucial due to more likely contingencies and hence more RT price fluctuations and even occurring the so-called \textit{black swan events}. Finally, such retailer could offer better deals to customers as well., Comment: 8 pages. arXiv admin note: substantial text overlap with arXiv:1505.06505

Plug-in electric vehicles (PEVs) can significantly increase the elasticity of residential electricity demand. This elasticity can be employed to shape the daily aggregated electricity demand profile of a system comprised of a large number of residential PEVs' users sharing one electricity retailer or an aggregator. In this paper, we propose a joint demand shaping and altering algorithm for managing vehicle-to-grid (V2G) enabled PEVs' electricity assignments (charging and discharging) in order to diminish the overall electricity procurement costs for a retailer bidding to two-settlement electricity markets, i.e., a day-ahead (DA) and a real-time (RT) market. This approach is decentralized, scalable, fast converging and does not violate users' privacy. Our simulations' results demonstrate significant overall cost savings (up to 28\%) for a retailer bidding to an operational electricity market by using our proposed algorithm. This becomes even more salient when the power system is integrating a large number of intermittent energy resources wherein RT demand altering is crucial due to more likely contingencies and hence more RT price fluctuations and even more so-called \textit{black swan events}. Lower electricity procurement cost for a retailer finally makes it able to offer better deals to customers and expand its market capacity. This implies that customers can enjoy lower electricity bills as well.

Electric vehicles (EVs) add significant load on the power grid as they become widespread. The characteristics of this extra load follow the patterns of people's driving behaviours. In particular, random parameters such as arrival time and charging time of the vehicles determine their expected charging demand profile from the power grid. In this paper, we first present a model for uncoordinated charging power demand of EVs based on a stochastic process and accordingly we characterize an EV's expected daily power demand profile. Next, we illustrate it for different charging time distributions through simulations. This gives us useful insights into the long-term planning for upgrading power systems' infrastructure to accommodate EVs. Then, we incorporate departure time as another random variable into this modelling and introduce an autonomous demand response (DR) technique to manage the EVs' charging demand. Our results show that, it is possible to accommodate a large number of EVs and achieve the same peak-to-average ratio (PAR) in daily aggregated power consumption of the grid as when there is no EV in the system. This peak value can be decreased further significantly when we add vehicle-to-grid (V2G) capability in the system., Comment: 5 pages, 6 figures. arXiv admin note: substantial text overlap with arXiv:1407.1576

Electric vehicles (EVs) and particularly plug-in hybrid electric vehicles (PHEVs) are foreseen to become popular in the near future. Not only are they much more environmentally friendly than conventional internal combustion engine (ICE) vehicles, their fuel can also be catered from diverse energy sources and resources. However, they add significant load on the power grid as they become widespread. The characteristics of this extra load follow the patterns of people's driving behaviours. In particular, random parameters such as arrival time and driven distance of the vehicles determine their expected demand profile from the power grid. In this paper, we first present a model for uncoordinated charging power demand of PHEVs based on a stochastic process and accordingly we characterize the EV's expected daily power demand profile. Next, we adopt different distributions for the EV's charging time following some available empirical research data in the literature. Simulation results show that the EV's expected daily power demand profiles obtained under the uniform, Gaussian with positive support and Rician distributions for charging time are identical when the first and second order statistics of these distributions are the same. This gives us useful insights into the long-term planning for upgrading power systems' infrastructure to accommodate PHEVs. In addition, the results from this modelling can be incorporated into designing demand response (DR) algorithms and evaluating the available DR techniques more accurately., Comment: 6 pages, 10 figures

The newly emerging wireless powered communication networks (WPCNs) have recently drawn significant attention, where radio signals are used to power wireless terminals for information transmission. In this paper, we study a WPCN where one multi-antenna access point (AP) coordinates energy transfer and information transfer to/from a set of single-antenna users. A harvest-then-transmit protocol is assumed where the AP first broadcasts wireless power to all users via energy beamforming in the downlink (DL), and then the users send their independent information to the AP simultaneously in the uplink (UL) using their harvested energy. To optimize the users' throughput and yet guarantee their rate fairness, we maximize the minimum throughput among all users by a joint design of the DL-UL time allocation, the DL energy beamforming, and the UL transmit power allocation plus receive beamforming. We solve this non-convex problem optimally by two steps. First, we fix the DL-UL time allocation and obtain the optimal DL energy beamforming, UL power allocation and receive beamforming to maximize the minimum signal-to-interference-plus-noise ratio (SINR) of all users. This problem is shown to be in general non-convex; however, we convert it equivalently to a spectral radius minimization problem, which can be solved efficiently by applying the alternating optimization based on the non-negative matrix theory. Then, the optimal time allocation is found by a one-dimension search to maximize the minimum rate of all users. Furthermore, two suboptimal designs of lower complexity are proposed, and their throughput performance is compared against that of the optimal solution., Comment: submitted for possible publication

The dual use of radio signals for simultaneous wireless information and power transfer (SWIPT) has recently drawn significant attention. To meet the practical requirement that energy receivers (ERs) operate with significantly higher received power as compared to information receivers (IRs), ERs need to be deployed in more proximity to the transmitter than IRs. However, due to the broadcast nature of wireless channels, one critical issue arises that the messages sent to IRs can be eavesdropped by ERs, which possess better channels from the transmitter. In this paper, we address this new secrecy communication problem in a multiuser multiple-input single-output (MISO) SWIPT system where one multi-antenna transmitter sends information and energy simultaneously to an IR and multiple ERs, each with one single antenna. To optimally design transmit beamforming vectors and their power allocation, two problems are investigated with different aims: the first problem maximizes the secrecy rate for IR subject to individual harvested energy constraints of ERs, while the second problem maximizes the weighted sum-energy transferred to ERs subject to a secrecy rate constraint for IR. We solve these two non-convex problems optimally by reformulating each of them into a two-stage problem. First, by fixing the signal-to-interference-plus-noise ratio (SINR) target for ERs (for the first problem) or IR (for the second problem), we obtain the optimal beamforming and power allocation solution by applying the technique of semidefinite relaxation (SDR). Then, the original problems are solved by a one-dimension search over the optimal SINR target for ERs or IR. Furthermore, for each of the two studied problems, suboptimal solutions of lower complexity are also proposed in which the information and energy beamforming vectors are separately designed with their power allocation., Comment: accepted by IEEE Transactions on Signal Processing. Longer version of arXiv:1306.0969

Scavenging energy from ambient radio signals, namely wireless energy harvesting (WEH), has recently drawn significant attention. In this paper, we consider a point-to-point wireless link over the flat-fading channel, where the receiver replenishes energy via WEH from the signals sent by the transmitter. We consider a SISO (single-input single-output) system where the single-antenna receiver cannot decode information and harvest energy independently from the same signal received. Under this practical constraint, we propose a dynamic power splitting (DPS) scheme, where the received signal is split into two streams with adjustable power levels for information decoding and energy harvesting separately based on the instantaneous channel condition that is assumed to be known at the receiver. We derive the optimal power splitting rule at the receiver to achieve various trade-offs between the maximum ergodic capacity for information transfer and the maximum average harvested energy for power transfer. Moreover, for the case when the channel state information is also known at the transmitter, we investigate the joint optimization of transmitter power control and receiver power splitting. Finally, we extend the result for DPS to the SIMO (single-input multiple-output) system and investigate a low-complexity power splitting scheme termed antenna switching., Comment: accepted by IEEE Transactions on Communication

Energy harvesting is a promising solution to prolong the operation of energy-constrained wireless networks. In particular, scavenging energy from ambient radio signals, namely wireless energy harvesting (WEH), has recently drawn significant attention. In this paper, we consider a point-to-point wireless link over the narrowband flat-fading channel subject to time-varying co-channel interference. It is assumed that the receiver has no fixed power supplies and thus needs to replenish energy opportunistically via WEH from the unintended interference and/or the intended signal sent by the transmitter. We further assume a single-antenna receiver that can only decode information or harvest energy at any time due to the practical circuit limitation. Therefore, it is important to investigate when the receiver should switch between the two modes of information decoding (ID) and energy harvesting (EH), based on the instantaneous channel and interference condition. In this paper, we derive the optimal mode switching rule at the receiver to achieve various trade-offs between wireless information transfer and energy harvesting. Specifically, we determine the minimum transmission outage probability for delay-limited information transfer and the maximum ergodic capacity for no-delay-limited information transfer versus the maximum average energy harvested at the receiver, which are characterized by the boundary of so-called "outage-energy" region and "rate-energy" region, respectively. Moreover, for the case when the channel state information (CSI) is known at the transmitter, we investigate the joint optimization of transmit power control, information and energy transfer scheduling, and the receiver's mode switching. Our results provide useful guidelines for the efficient design of emerging wireless communication systems powered by opportunistic WEH., Comment: to appear in IEEE Transactions on Wireless Communication

Characterizing the global maximum of weighted sum-rate (WSR) for the K-user Gaussian interference channel (GIC), with the interference treated as Gaussian noise, is a key problem in wireless communication. However, due to the users' mutual interference, this problem is in general non-convex and thus cannot be solved directly by conventional convex optimization techniques. In this paper, by jointly utilizing the monotonic optimization and rate profile techniques, we develop a new framework to obtain the globally optimal power control and/or beamforming solutions to the WSR maximization problems for the GICs with single-antenna transmitters and single-antenna receivers (SISO), single-antenna transmitters and multi-antenna receivers (SIMO), or multi-antenna transmitters and single-antenna receivers (MISO). Different from prior work, this paper proposes to maximize the WSR in the achievable rate region of the GIC directly by exploiting the facts that the achievable rate region is a "normal" set and the users' WSR is a "strictly increasing" function over the rate region. Consequently, the WSR maximization is shown to be in the form of monotonic optimization over a normal set and thus can be solved globally optimally by the existing outer polyblock approximation algorithm. However, an essential step in the algorithm hinges on how to efficiently characterize the intersection point on the Pareto boundary of the achievable rate region with any prescribed "rate profile" vector. This paper shows that such a problem can be transformed into a sequence of signal-to-interference-plus-noise ratio (SINR) feasibility problems, which can be solved efficiently by existing techniques. Numerical results validate that the proposed algorithms can achieve the global WSR maximum for the SISO, SIMO or MISO GIC., Comment: This is the longer version of a paper to appear in IEEE Transactions on Wireless Communications