Search

Surface pressure fluctuations of Mach 8 turbulent flow past a 2.5- and a 4.25-deg expansion corner maintained a Gaussian distribution but were severely attenuated by the expansion process. The pressure fluctuations did not recover to those of an equilibrium turbulent flow even though the mean pressures reached downstream inviscid values in four to six boundary-layer thicknesses. The fluctuations were convected with a velocity comparable to that on a flat plate, and they maintained their identities longer for the stronger expansion. The damping of pressure fluctuations at hypersonic Mach numbers, even by small corner angles, may be exploited in fatigue design.

Experiments were performed at Mach 8 in which a shock was reflected off a low Reynolds number, turbulent boundary layer past an expansion corner. The shock was generated by 2- and 4-deg sharp wedges, and the corner was either 2.5 or 4.25 deg. The inviscid shock reflection was one boundary layer thickness ahead or behind the corner or at the corner itself. All interactions were unseparated. The dynamic surface pressure distributions were examined together with the case of shock reflection on a flat plate. With shock reflection ahead of the corner, the mean surface pressure downstream was attenuated due to the proximity of the corner. With shock reflection downstream of the corner, the surface pressure distribution showed a reduced upstream influence. The highly swept expansion fan produced a surface pressure which rose gently downstream with no minima, unlike in supersonic flows with the same shock-corner separation distance. In many of the interactions, an anomalous pressure peak was found downstream. The surface pressure through the interaction exhibited unsteadiness.

Previous studies of the high-speed viscous inviscid interaction between a turbulent boundary layer and an expansion at a convex corner have noted that surface pressure decreases toward the downstream inviscid value yielded by a Prandtl-Meyer expansion. A downstream influence on the corner is presently identified which is based on the mean surface pressure distribution; a scaling law is proposed for this distance.

Mean and fluctuating surface pressure data were obtained in a Mach 8, turbulent, cold flow past an expansion corner subjected to shock impingement. The expansion corner of 2.5 or 4.25 deg was located at 0.77 m (30.25 in.) from the leading edge of a shape-edged flat plate while an external shock, generated by either a 2- or 4-deg sharp wedge, impinged at the corner, or at one boundary layer thickness ahead or behind the corner. The mean pressure distribution was strongly influenced by the mutual interaction between the shock and the expansion. For example, the upstream influence decreased when the shock impinged downstream of the corner. Also, the unsteadiness of the interactions was characterized by an intermittent region and a local rms pressure peak near the upstream influence line. The peak rms pressure fluctuations increased with a larger overall interaction strength. Shock impingement downstream of the corner resulted in lower peaks and also in a shorter region of reduced fluctuation levels. These features may be exploited in inlet design by impinging the cowl shock downstream of an expansion corner instead of at the corner. In addition, a limited Pitot pressure survey showed a thinning of the boundary layer downstream of the corner.

The boundary layer that developed on a one-meter long flat plate at a nominal Mach number of 8 and a Reynolds number of 10.2 million per meter was studied using a shock tunnel. The wall-to-stagnation temperature ratio was 0.35. The turbulent velocity profiles possessed very small wake components. The small wake component is characteristic of low Reynolds number flows and may indicate that a turbulent boundary layer was not fully developed. The magnitude of the surface pressure fluctuations in the turbulent part of the flow was found to be in agreement with semi-empirical predictions. These fluctuations were larger than those obtained at lower supersonic Mach numbers and indicated that pressure fluctuations may not be neglected at hypersonic Mach numbers. The fluctuations also possessed a convection velocity that increased with transducer spacing and followed the trend of previous investigations.

The sensitivity of a miniature fast-response piezoresistive pressure transducer determined dynamically was found to be slightly higher than that determined statically. Thus, mean pressures in a turbulent or unsteady flowfield that are measured using statically-calibrated pressure transducers would be slightly above true values. Unsteady pressure measurements to obtain space-time correlations and spectra can, however, be properly performed if the slight error is acceptable. These measurements are, obviously, subjected to limitations imposed by the bandwidth and the spatial resolution of the transducer. The noise spectrum revealed that the noise is predominantly above the transducer's resonant frequency. Filtering to improve the signal-to-noise ratio is particularly necessary when using the transducers at their low range. Transducer drift increases the signal-to-noise ratio and can adversely affect mean measurements.