Search

The development of a single mode fiber-based pulsed laser with variable pulse duration, energy, and repetition rate has enabled the characterization of photorefractive polymer (PRP) in a previously inaccessible regime located between millisecond and microsecond single pulse illumination. With the addition of CW and nanosecond pulse lasers, four wave mixing measurements covering 9 orders of magnitudes in pulse duration are reported. Reciprocity failure of the diffraction efficiency according to the pulse duration for a constant energy density is observed and attributed to multiple excitation, transport and trapping events of the charge carriers. However, for pulses shorter than 30 μs, the efficiency reaches a plateau where an increase in energy density no longer affects the efficiency. This plateau is due to the saturation of the charge generation at high peak power given the limited number of sensitizer sites. The same behavior is observed in two different types of devices composed of the same material but with or without a buffer layer covering one electrode, which confirm the origin of these mechanisms. This new type of measurement is especially important to optimize PRP for applications using short pulse duration.

A monolithic fiber chirped pulse amplification system that generates sub-500 fs pulses with 913 µJ pulse energy and 4.4 W average power at 1.55 µm wavelength has recently been demonstrated. The estimated peak power for the system output approached 1.9 GW. The pulses were near diffraction-limited and near transform-limited, benefiting from the straight and short length of the booster amplifier as well as adaptive phase shaping for the overall mitigation of the nonlinear phase accumulation. The booster amplifier employs an Er(3+)-doped large mode area high efficiency media fiber just 28 cm in length with a fundamental mode (LP(01)) diameter of 54 µm and a corresponding effective mode area of 2290 µm(2).

A novel monolithic fiber-optic chirped pulse amplification (CPA) system for high energy, femtosecond pulse generation is proposed and experimentally demonstrated. By employing a high gain amplifier comprising merely 20 cm of high efficiency media (HEM) gain fiber, an optimal balance of output pulse energy, optical efficiency, and B-integral is achieved. The HEM amplifier is fabricated from erbium-doped phosphate glass fiber and yields gain of 1.443 dB/cm with slope efficiency >45%. We experimentally demonstrate near diffraction-limited beam quality and near transform-limited femtosecond pulse quality at 1.55 µm wavelength. With pulse energy >100 µJ and pulse duration of 636 fs (FWHM), the peak power is estimated to be ~160 MW. NAVAIR Public Release Distribution Statement A-"Approved for Public release; distribution is unlimited".