Search

Phosphate pollution is a very challenging problem for the water environment. Phosphate mixed with water in various ways causes eutrophication. To sustain life in aquatic systems, phosphate ions must be cleaned. Therefore, it is very important to remove phosphate in wastewater. Here, an adsorption method has been tried for the removal of phosphate. MOF-76 (Ce), a cerium-based metal-organic framework, was synthesized by a hydrothermal method. Since metal oxides are known to be successful in phosphate adsorption, CeO 2 nanoparticles were also obtained by pyrolysis of this MOF structure. The phosphate adsorption efficiencies of both adsorbents were compared. The characterization methods (SEM, FTIR, XRD, and TGA) were applied to adsorbents. The kinetic, isotherm, and thermodynamics studies were applied to experimental results. At 298 K, the adsorption capacity of MOF-76 (Ce) is higher than that of CeO 2 , according to Langmuir isotherm q m values. The q m values are 72.97 and 55.71 mg/g, respectively. Both adsorbents follow the pseudo second-order kinetic model. It has been found that MOF-76 (Ce) has a pH-selective property in phosphate adsorption. No change was observed in the phosphate adsorption capacity of CeO 2 with pH. In terms of thermodynamics, the endothermic reaction is valid for both adsorbents.

Cr(VI), which has toxic effects, is a heavy metal and it must be removed from the environment due to the various damages it causes. In this study, the removal of Cr(VI) pollutants from aqueous solutions with Fe 3 O 4 -based materials using a batch adsorption technique was investigated. Magnetically modified graphene nanoplatelet (GNP)-based nanocomposites were prepared and their structures were characterized by FTIR, XRD, SEM, BET, and TGA techniques. The effects of various physicochemical parameters such as adsorbent dose, contact time, initial Cr(VI) solution concentration, pH, and the presence of coexisting ions (NaCl) on the adsorption process were investigated. Accordingly, the optimum conditions for Cr(VI) removal were determined. Nonlinear Langmuir, Freundlich, and Temkin isotherm models and pseudo-first-order, pseudo-second-order, and Bangham kinetic models were used to investigate the adsorption mechanism. The experimental data relatively fit the second-order kinetic model and the Freundlich isotherm model. The maximum adsorption capacities for pure Fe 3 O 4 (Fe:GNP 1:0), Fe:GNP (2:1), and Fe:GNP (1:1) nanocomposite materials at 298 K and pH of approximately 5 were obtained as 12.71 mg/g, 27.03 mg/g, and 62.27 mg/g, respectively. This result showed that Cr(VI) removal increased as the amount of GNP in the composite material increased. Generally, the results confirmed that magnetically modified GNP-based adsorbents are functional and promising materials that can be used for the removal of pollutants such as Cr(VI) from aqueous media., Competing Interests: Conflict of interest: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© TÜBİTAK.)

The increase in production and consumption of pharmaceuticals and personal care products causes environmental problems. In this study, naproxen and clofibric acid adsorption were studied using Fe 3 O 4 -supported UiO-66 (Zr) metal-organic framework (Mag-UiO-66). The adsorption processes were carried out in batch mode at pH value 3.0. The optimum adsorbent quantities, equilibrium periods, pseudo-first-order (PFO), pseudo-second-order (PSO), and intra-particles diffusion kinetic models were calculated. Non-linear Langmuir, Freundlich, Dubinin-Radushkevich (D-R), and Sips isotherm equations were applied to experimental data. Thermodynamic analyses of naproxen and clofibric acid adsorption were also carried out in this study. The Langmuir isotherm q m values were found as 14.15 mg/g for naproxen at 308 K and 41.87 mg/g for clofibric acid at 298 K. Both of the adsorption processes were exothermic. MISO (multi-input single-output) fuzzy logic models for removal of both naproxen and clofibric acid adsorptions were designed based on the experimental data to estimate the removal uptake values. It is noteworthy that the results obtained through designed fuzzy logic models matched well with the experimental data and the findings of this study emphasize the validity of designed fuzzy logic models., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)