Search

The NASA mission OSIRIS-REx has been observing near-Earth asteroid (101955) Bennu in close proximity since December 2018. In this work, we investigate spectral phase reddening -- that is, the variation of spectral slope with phase angle -- on Bennu using spectra acquired by the OSIRIS-REx Visible and InfraRed Spectrometer (OVIRS) covering a phase angle range of 8-130$^{o}$. We investigate this process at the global scale and for some localized regions of interest (ROIs), including boulders, craters, and the designated sample collection sites of the OSIRIS-REx mission. Bennu has a globally negative spectra slope, which is typical of B-type asteroids. The spectral slope gently increases in a linear way up to a phase angle of 90$^{\circ}$, where it approaches zero. The spectral phase reddening is monotonic and wavelength-dependent with highest values in the visible range. Its coefficient is 0.00044 $\mu$m$^{-1} ~deg^{-1}$ in the 0.55-2.5 $\mu$m range. For observations of Bennu acquired at high phase angle (130$^{\circ}$), phase reddening increases exponentially. Similar behavior was reported in the literature for the carbonaceous chondrite Mukundpura in spectra acquired at extreme geometries. Some ROIs, including the sample collection site, Nightingale, have a steeper phase reddening coefficient than the global average, potentially indicating a surface covered by fine material with high micro-roughness. The gentle spectral phase reddening effect on Bennu is similar to that observed in ground-based measurements of other B-type asteroids, but much lower than that observed for other low-albedo bodies such as Ceres or comet 67P/Churyumov-Gerasimenko. Monotonic reddening may be associated with the presence of fine particles at micron scales and/or of particles with fractal structure that introduce micro- and sub-micro roughness across the surface of Bennu., Comment: 17 pages, 12 figures, Astron. and Astroph., in press

The OSIRIS-REx Asteroid Sample Return Mission is the third mission in NASA's New Frontiers Program and is the first U.S. mission to return samples from an asteroid to Earth. The most important decision ahead of the OSIRIS-REx team is the selection of a prime sample-site on the surface of asteroid (101955) Bennu. Mission success hinges on identifying a site that is safe and has regolith that can readily be ingested by the spacecraft's sampling mechanism. To inform this mission-critical decision, the surface of Bennu is mapped using the OSIRIS-REx Camera Suite and the images are used to develop several foundational data products. Acquiring the necessary inputs to these data products requires observational strategies that are defined specifically to overcome the challenges associated with mapping a small irregular body. We present these strategies in the context of assessing candidate sample-sites at Bennu according to a framework of decisions regarding the relative safety, sampleability, and scientific value across the asteroid's surface. To create data products that aid these assessments, we describe the best practices developed by the OSIRIS-REx team for image-based mapping of irregular small bodies. We emphasize the importance of using 3D shape models and the ability to work in body-fixed rectangular coordinates when dealing with planetary surfaces that cannot be uniquely addressed by body-fixed latitude and longitude., Comment: 31 pages, 10 figures, 2 tables

In May of 2011, NASA selected the Origins, Spectral Interpretation, Resource Identification, and Security-Regolith Explorer (OSIRIS-REx) asteroid sample return mission as the third mission in the New Frontiers program. The other two New Frontiers missions are New Horizons, which explored Pluto during a flyby in July 2015 and is on its way for a flyby of Kuiper Belt object 2014 MU69 on Jan. 1, 2019, and Juno, an orbiting mission that is studying the origin, evolution, and internal structure of Jupiter. The spacecraft departed for near-Earth asteroid (101955) Bennu aboard an United Launch Alliance Atlas V 411 evolved expendable launch vehicle at 7:05 p.m. EDT on September 8, 2016, on a seven-year journey to return samples from Bennu. The spacecraft is on an outbound-cruise trajectory that will result in a rendezvous with Bennu in August 2018. The science instruments on the spacecraft will survey Bennu to measure its physical, geological, and chemical properties, and the team will use these data to select a site on the surface to collect at least 60 g of asteroid regolith. The team will also analyze the remote-sensing data to perform a detailed study of the sample site for context, assess Bennus resource potential, refine estimates of its impact probability with Earth, and provide ground-truth data for the extensive astronomical data set collected on this asteroid. The spacecraft will leave Bennu in 2021 and return the sample to the Utah Test and Training Range (UTTR) on September 24, 2023., Comment: 89 pages, 39 figures, submitted to Space Science Reviews - OSIRIS-REx special issue

This work updates and expands on results of our long-term radar-driven observational campaign of main-belt asteroids (MBAs) focused on Bus-DeMeo Xc- and Xk-type objects (Tholen X and M class asteroids) using the Arecibo radar and NASA Infrared Telescope Facilities (Ockert-Bell et al. 2008; 2010; Shepard et al. 2008; 2010). Eighteen of our targets were near-simultaneously observed with radar and those observations are described in Shepard et al. (2010). We combine our near-infrared data with available visible wavelength data for a more complete compositional analysis of our targets. Compositional evidence is derived from our target asteroid spectra using two different methods, a \c{hi}2 search for spectral matches in the RELAB database and parametric comparisons with meteorites. We present four new methods of parametric comparison, including discriminant analysis. Discriminant analysis identifies meteorite type with 85% accuracy. This paper synthesizes the results of these two analog search algorithms and reconciles those results with analogs suggested from radar data (Shepard et al. 2010). We have observed 29 asteroids, 18 in conjunction with radar observations. For eighteen out of twenty-nine objects observed (62%) our compositional predictions are consistent over two or more methods applied. We find that for our Xc and Xk targets the best fit is an iron meteorite for 34% of the samples. Enstatite Chondrites were best fits for 6 of our targets (21%). Stony-iron meteorites were best fits for 2 of our targets (7%). A discriminant analysis suggests that asteroids with no absorption band can be compared to iron meteorites and asteroids with both a 0.9 and 1.9 {\mu}m absorption band can be compared to stony-iron meteorites., Comment: 30 pages, 5 figures, 10 tables

M-type asteroids, as defined in the Tholen taxonomy (Tholen, 1984), are medium albedo bodies supposed to have a metallic composition and to be the progenitors both of differentiated iron-nickel meteorites and enstatite chondrites. We carried out a spectroscopic survey in the visible and near infrared wavelength range (0.4-2.5 micron) of 30 asteroids chosen from the population of asteroids initially classified as Tholen M -types, aiming to investigate their surface composition. The data were obtained during several observing runs during the years 2004-2007 at the TNG, NTT, and IRTF telescopes. We computed the spectral slopes in several wavelength ranges for each observed asteroid, and we searched for diagnostic spectral features. We confirm a large variety of spectral behaviors for these objects as their spectra are extended into the near-infrared, including the identification of weak absorption bands, mainly of the 0.9 micron band tentatively attributed to orthopyroxene, and of the 0.43 micron band that may be associated to chlorites and Mg-rich serpentines or pyroxene minerals such us pigeonite or augite. A comparison with previously published data indicates that the surfaces of several asteroids belonging to the M-class may vary significantly. We attempt to constrain the asteroid surface compositions of our sample by looking for meteorite spectral analogues in the RELAB database and by modelling with geographical mixtures of selected meteorites/minerals. We confirm that iron meteorites, pallasites, and enstatite chondrites are the best matches to most objects in our sample, as suggested for M-type asteroids. The presence of subtle absorption features on several asteroids confirms that not all objects defined by the Tholen M-class have a pure metallic composition., Comment: 10 figures, 6 tables; Icarus, in press

We report on progress in the search for signs of space weathering on Bennu. We provide an overview of the space weathering evidence to date, and summarize relevant findings from several ongoing parallel studies of surface processes and surface properties. We examine trends from these studies in the context of space weathering, and what is known about near-Earth asteroid surface maturation. Because Bennu is covered with blocks, boulders, and rocks of various sizes, our search for space weathering signals has inevitably led to a study of the properties of Bennu’s rocks. Our research question is – do Bennu’s bright and dark rock populations form a maturity continuum due to space weathering, or alternatively, do the bright and dark rocks provide compelling evidence for two distinct rock populations on Bennu? In particular, we present our best estimate of the sub-field-of-view OVIRS (OSIRIS-REx Visible and Infrared Spectrometer) spectral properties of the largest bright boulders and compare them with the darker materials on Bennu’s surface to see if the observed spectral and albedo differences are consistent with space weathering effects, or not.

Space weathering is an important process that affects the surfaces of airless bodies, such as (101955) Bennu. The consequences of this process include physical and chemical changes to materials on the surface, which in turn change spectral characteristics, especially in the visible to near infrared wavelengths. These spectral changes are not the same across airless bodies because the changes are dependent on the composition and mineralogy of the surface and even location within the Solar System. The main space weathering products responsible for these spectral changes are submicroscopic particles, which consist of two types, nanophase and microphase particles, and affect visible to near-infrared reflectance spectra differently. Nanophase particles are particles <33 nm in size and occur in agglutinates and within glassy patinas around regolith particles. In contrast, microphase particles are >33 nm in size and are present only within agglutinates. These spectral differences are best illustrated by lunar samples. In lunar soils, the nanophase and microphase particles consist of metallic iron. With increasing abundance of nanophase iron particles in a regolith, its spectrum exhibits a lower overall reflectance in the visible to near infrared, weakened absorption bands, and a reddened continuum slope. In contrast, an increasing abundance of microphase iron only causes decreases in reflectance and not reddening. Because of the spectral differences introduced by these two types of particles, it is possible to model the nanophase and microphase particle abundances of a surface through the radiative transfer technique. Beyond the Moon, the composition of the nanophase and microphase particles can include other phases because the mineralogy of the surfaces of other planetary bodies is different. For example, the nanophase and microphase particles may consist of amorphous carbon (Mercury) and sulfides (Itokawa). The mineralogy of Bennu is consistent with carbonaceous chondrites. From a number of space weathering experiments on CM chondrites, the likely nanophase and microphase mineral phases on Bennu includes iron, magnetite, and sulfides (i.e., pentlandite and troilite). The goal of this work is to input the predicted nanophase and microphase compositions for Bennu into the radiative transfer technique. Next, we use this technique to model the OSIRIS-REx Visible Infrared Spectrometer (OVIRS) so that we can model the nanophase and microphase particle abundances across the surface. This will result in space weathering maps of the surface of Bennu, which are useful for understanding the degree of space weathering across the surface and its relationship to various regions and geological features.

Our hypothesis is that the higher-albedo rocks on the surface of Bennu are products of thermal/mechanical weathering. If this suggestion is correct, then the higher albedo (~7–15%) of some rocks relative to the average background on Bennu (~4.5%) could be explained by their relatively fresh surfaces. Older rocks on Bennu would then be the darkest rocks— those that have experienced the most space weathering over time due to exposure to the space environment. Thermal/mechanical weathering (cracking of rocks) is a candidate mechanism for the particle ejection events observed to occur with regular frequency from the asteroid surface.

The surfaces of airless bodies, such as 101955 Bennu, are vulnerable to micrometeoroids, high-energy particles, and solar wind particles. As a result, material on the surface of these bodies experience physical and chemical changes that are collectively known as space weathering. Space weathering processes result in the production of sub-micronsized particles called submicroscopic particles. There are two types of submicroscopic particles, nanophase (<33 nm in size) and microphase particles (>33 nm in size). Studies of lunar samples show that nanophase particles occur within the glassy rims that surround grains and agglutinates. In contrast, microphase iron particles occur only within agglutinates. Another important difference between these two particles is that nanophase and microphase particles affect visible to near-infrared reflectance spectra differently. From lunar samples, the presence of nanophase particles in a regolith causes the regolith’s reflectance spectrum to darken and redden, whereas the presence of microphase particles in a regolith causes it to only darken. In addition, the reflectance spectra of submicroscopic particle-bearing regolith exhibit weakened absorptions and spectral features. Lantz et al. (2018) found that these particles also affect spectral curvature [8]. By taking advantage of these spectral characteristics, with global spectral data, it is possible to model the nanophase and microphase particle abundances across a planetary surface resulting in the production of global space weathering maps.

NASA's Origins, Spectral Interpretation, Resource Identification, and Security-Regolith Explorer (OSIRIS-REx) mission successfully launched on September 8th, 2016. During its rendezvous with near-Earth asteroid (101955) Bennu beginning in 2018, OSIRIS-REx will characterize the asteroid's physical, mineralogical, and chemical properties in an effort to globally map the properties of Bennu, a primitive carbonaceous asteroid, and choose a sampling location]. In preparation for these observations, analog samples were spectrally characterized across visible, near- and thermal-infrared wavelengths and were used in initial tests on mineral-phase-detection and abundance-determination software algorithms.

NASA's OSIRIS-REx sample return mission launched on September 8th, 2016 to rendezvous with B-type asteroid (101955) Bennu in 2018. Type C and B asteroids have been linked to carbonaceous chondrites because of their similar visible - to - near infrared (VIS-NIR) spectral properties [e.g., 1,2]. The OSIRIS-REx Visible and Infrared Spectrometer (OVIRS) and the Thermal Emission Spectrometer (OTES) will make spectroscopic observations of Bennu during the encounter. Constraining the presence or absence of hydrous minerals (e.g., Ca-carbonate, phyllosilicates) and organic molecules will be key to characterizing Bennu [3] prior to sample site selection. The goal of this study was to develop a suite of analog and meteorite samples and obtain their spectral properties over the wavelength ranges of OVIRS (0.4- 4.3 micrometer) and OTES (5.0-50 micrometer). These spectral data were used to validate the mission science-data processing system. We discuss the reasoning behind the study and share lessons learned.

NIRS is a near infrared spectrometer on-board the spacecraft HAYABUSA, which aims to return samples from a near-earth asteroid, 25143 Itokawa. HAYABUSA was successfully launched by Japanese M-V-5 rocket on May 9, 2003. After the successful earth swing-by on May 19, 2004, the spacecraft is now on the way toward the asteroid, where it will arrive in this summer. During the rendezvous phase with the asteroid, we will observe the asteroid surface using NIRS and obtain reflectance spectra of the surface materials across the wavelength range of 850nm to 2100nm. Based on ground-based observations [1],[2],[3], 25143 Itokawa appears to be an S(IV) type asteroid. NIRS can detect absorption bands due to olivine and pyroxene and investigate the mineralogical composition of the surface materials, and reveal a relationship between asteroids and meteorites.

NIRS is a near infrared spectrometer on-boarded the spacecraft HAYABUSA (MUSESC), which aims to return samples from a near-earth asteroid, (25143) Itokawa (1998 SF36). HAYABUSA was successfully launched by Japanese M-V-5 rocket on May 19, 2003. After the earth swing-by in Jun 2004, the spacecraft will arrive at the asteroid in summer 2005. During the rendezvous phase with the asteroid, we will observe the asteroid surface using NIRS and obtain reflectance spectra of the surface materials across the wavelength range of 850nm to 2100nm. Based on ground-based observations [1],[2],[3], (25143) Itokawa appears to be an S(IV) type asteroid. NIRS can detect absorption bands due to olivine and pyroxene and investigate the mineralogical composition of the surface materials. Combining with the data from asteroid multiband imaging camera (AMICA) and X-ray spectrometer (XRS), we can reveal a relationship between asteroids and meteorites.

We have spectrophotometrically observed 433 Eros, the target of the Near Earth Asteroid Rendezvous (NEAR)-Shoemaker spacecraft, on 1995 December 4 from 1.25 to 3.35 microns. As expected, Eros shows no evidence of an absorption feature over 5% in the 3-micron region, and is interpreted to have an anhydrous surface within observational uncertainties. Our observations in the JHK region agree with previous work by Chapman and Morrison and Murchic and Pieters, but differ from the near-infrared spectrometer spectra reported by Clark et al. Our calculations indicate that thermal flux from Eros is not responsible for this mismatch.

Olivine is readily detected on 433 Eros using the new thermo-reflectance spectral technique applied to near-IR spectra obtained at Eros by the NEAR spacecraft. Additional information is contained in the original extended abstract.

Most of the spectral characteristics of ordinary chondrites and S-asteroids in the visible and infrared can be reduced to three numerical values. These values represent the depth of the absorption band resulting from octahedrally coordinated Fe(sup 2+), the reflectance at 0.56 microns and the slope of the continuum (as measured according to convention). By plotting these three characteristics, it is possible to immediately compare the spectral characteristics of large numbers of ordinary chondrites and S-asteroids. Commonality of spectral characteristics between these populations can thus be evaluated on the basis of overlap in position on three two-coordinate systems: albedo vs. band depth, band depth vs. slope, and slope vs. albedo. In order to establish identity, members of the two populations must overlap on all three of these independent parameter spaces. In this coordinate system, spectra of 23 ordinary chondrites (representing all metamorphic grades), and 39 S-asteroids were compared. It was found that there was no overlap between the two populations in terms of the slope vs. band depth parameters, nor were most chondrites identical to the S-asteroids with respect to the other criteria. However, the controversial question remains: Where are the parent bodies of the chondrites? Perhaps an even more critical question is: Where are our samples of the S-asteroids? Considering the geography of the asteroid belt and the theory that early solar-system electromagnetic induction heating differentiated protoasteroids in the inner portion of the main belt, it was suggested that although S-asteroids and ordinary chondrites have very similar mineralogy, the S-asteroids are mixtures of metallic nickel iron and silicates which resulted from magmatism induced by electromagnetic heating whereas chondrites were only slightly metamorphosed nebular condensates. In this scenario chondrites would have been derived from a population of bodies with thermal lag times so short that they were not subjected to melting during the phase of the electromagnetic induction heating event but only to various degrees of pervasive metamorphism. Furthermore, these objects would then have been too small to be observed and systematically included in the library of asteroidal spectra. It was also suggested that the parametric distribution of S-asteroid spectra could be reproduced by mixing various proportions of NiFe meteorite and achondritic materials. This has also been demonstrated in the laboratory.