Search

High-strength steels such as Dual Phase (DP), Transformation-Induced Plasticity (TRIP), and Twinning-Induced Plasticity (TWIP) steels have gained importance in automotive applications due to the potential for weight reduction and increased performance in crash tests. However, as resistance increases, there is also an increase in springback due to residual stresses after the forming process. This is mainly because of the greater elastic region of these materials and other factors associated with strain hardening, such as the Bauschinger effect, that brings theory of kinematic hardening to mathematical modeling. This means that finite element software must consider these properties so that the simulation can accurately predict the behavior. Currently, this knowledge is still not widespread since it has never been used in conventional materials. Additionally, engineers and researchers use the Forming Limit Diagram (FLD) curve in their studies. However, it does not fully represent the actual failure limit of materials, especially in high-strength materials. Based on this, the Fracture Forming Limit Diagram (FFLD) curve has emerged, which proposes to resolve these limitations. Thus, this review aims to focus on how finite element methods consider all these factors in their modeling, especially when it comes to the responses of high-strength steels. [ABSTRACT FROM AUTHOR]

The additive manufacturing technique performed via laser powder bed fusion has matured as a technology for manufacturing cemented carbide parts. The parts are built by additive consolidation of thin layers of a WC and Co mixture using a laser, depending on the power and scanning speed, making it possible to create small, complex parts with different geometries. NbC-based cermets, as the main phase, can replace WC-based cemented carbides for some applications. Issues related to the high costs and dependence on imports have made WC and Co powders emerge as critical raw materials. Furthermore, avoiding manufacturing workers' health problems and occupational diseases is a positive advantage of replacing WC with NbC and alternative binder phases. This work used WC and NbC as the main carbides and three binders: 100% Ni, 100% Co, and 50Ni/50Co wt.%. For the flowability and spreadability of the powders of WC- and NbC-based alloy mixtures in the powder bed with high cohesiveness, it was necessary to build a vibrating container with a pneumatic turbine ranging from 460 to 520 Hz. Concurrently, compaction was promoted by a compacting system. The thin deposition layers of the mixtures were applied uniformly and were well distributed in the powder bed to minimize the defects and cracks during the direct sintering of the samples. The parameters of the L-PBF process varied, with laser scanning speeds from 25 to 125 mm.s─1 and laser power from 50 to 125 W. Microstructural aspects and the properties obtained are presented and discussed, seeking to establish the relationships between the L-PBF process variables and compare them with the liquid phase sintering technique. [ABSTRACT FROM AUTHOR]

This study presents a comparative life cycle assessment (LCA) of two manufacturing scenarios for a camera housing: Powder Bed Fusion (PBF) using polyamide 12 (PA-12) and Computer Numeric Control (CNC) machining using aluminum, for a cradle-to-gate boundary. The selected impact categories were cumulative energy demand (CED) and global warming potential (GWP). The key findings indicate that the PA-12 PBF part outperformed the aluminum CNC machining one in terms of environmental and energy performance, showing a significant reduction of approximately 90% in equivalent carbon emissions and 84% in cumulative energy demand. Sensitivity analyses revealed that the PBF process was highly sensitive to changes in the proportion of virgin/recycled material for the printing process, variations in the life cycle inventory (LCI) data sources for PA-12 powder production, and changes in the transportation system for imported materials, as is the case for the main input in the process (PA-12 powder). Sensitivity analysis also showed less impact for the PBF camera housing even considering a lifespan of one-fifth that of the aluminum for the impact categories considered. However, it should be noted that this analysis did not include considerations for the usage and end-of-life phases, which may have significant contributions to the overall environmental impact. [ABSTRACT FROM AUTHOR]

The excellent casting behavior and mechanical and corrosion properties of aluminum-silicon (Al-Si)-based alloys make them ideal for the manufacture of lightweight components with complex geometries. However, these properties depend directly on their microstructure, which, in its turn, is strongly affected by the composition of the alloy, among other factors. Several elements can be added to the material aiming to promote microstructural changes, e.g., grain refinement, optimization of phase morphology and distribution, and precipitation strengthening. Efforts are continuously put into such enhancements of cast Al alloys since they lead to quality improvements that allow for weight reduction and safety increase. Considering the technological relevance of the subject, this paper provides an overview of the research focused on the addition of alloying elements to these alloys, with a greater focus on Al-Si-based systems and the comprehension of the effects of these additions on their microstructure and properties. [ABSTRACT FROM AUTHOR]

This work provides a comprehensive evaluation of the energy transition scenarios of four countries Brazil, Germany, France, and the UK in the context of climate change and the urgent need for decarbonisation and their efforts to achieve NetZero goals by 2030. The study adopts bibliometric analysis as a technical procedure to identify energy transition policies, research groups, and institutions, actions of private companies, and new perspectives and trends for future studies about NetZero. The analysis highlights the emergence of new technologies such as bioenergy, hydrogen-based systems, and renewable energy storage solutions, which are essential for achieving NetZero goals. It emphasizes the need to move beyond using fossil fuels more efficiently and instead, to adopt innovative approaches to decarbonise industries and transportation. The study highlights the emergence of new technologies such as hydrogen-based systems, renewable energy storage solutions, and advanced carbon capture and utilization methods, which have the potential to accelerate the energy transition. The circular economy is also emerging as a promising avenue for reducing waste and conserving resources. The research identifies block chain technology as a potential tool for facilitating carbon offset trading, while artificial intelligence can be used to optimize energy consumption. Collaboration between governments, research institutions, and private companies is essential for driving progress in the field and achieving NetZero goals. Overall, this research provides valuable insights and a starting point for further studies on NetZero and decarbonisation [ABSTRACT FROM AUTHOR]