Search

Background: With the tremendous increase in the usage of smart meters for industrial/ household purposes, their implementation is considered a crucial challenge in the Internet of Things (IoT) world, leading to a demand for emerging 5G technology. In addition, a large amount of data has to be communicated by smart meters efficiently, which needs a significant enhancement in bandwidth. The power amplifier (PA) plays a major role in deciding the efficiency and bandwidth of the entire communication system. Among the various modes of PAs, a newly developed Class-J mode PA has been proven to achieve high efficiency over a wide bandwidth by maintaining linearity. Methods: This paper proposes a Class-J mode PA design methodology using a CGH40010F-GaN device that operates at a 3.5 GHz frequency to meet the requirements of 5G wireless communication technology for the replacement of existing 4G/LTE technology used for advanced metering infrastructure (AMI) in smart grids. This research's main objective is to design the proper matching networks (M.Ns) to achieve Class-J mode operation that satisfies the bandwidth requirements of 5G smart grid applications. With the target impedances obtained using the load-pull simulation, lumped element matching networks are analyzed and designed in 3 ways using the ADS EDA tool. Results: The simulation results reveal that the proposed Class-J PA provides a maximum drain efficiency (D.E) of 82%, power added efficiency (PAE) of 67% with 13 dB small-signal gain at 3.5 GHz, and output power of 40 dBm (41.4 dBm peak) with a power gain of approximately 7 dB over a bandwidth of approximately 400 MHz with a 28 V power supply into a 50 Ω load. Conclusion: The efficiency and bandwidth of the proposed Class-J PA can be enhanced further by fine-tuning the matching network design to make it more suitable for 5G smart meter/grid applications., Competing Interests: No competing interests were disclosed., (Copyright: © 2024 Sridhar N et al.)

Recent progress studies in light of wireless communication systems mainly centred around two focuses: zero-energy consumption and ultra-reliable and low-latency communication (URLLC). Among various cutting-edge areas, exploiting ambient backscatter communication (Backcom) has recently been devised as one of the foremost solutions for achieving zero energy consumption through the viability of ambient radio frequency. Meanwhile, using short-packet communication (SPC) is the cheapest way to reach the goal of URLLCs. Upon these benefits, we investigate the feasibility of Backcom and SPC for symbiotic wireless sensor networks by analyzing the system performance. Specifically, we provide a highly approximated mathematical framework for evaluating the block-error rate (BLER) performance, followed by some useful asymptotic results. These results provide insights into the level of diversity and coding gain, as well as how packet design impacts BLER performance. Numerical results confirm the efficacy of the developed framework and the correctness of key insights gleaned from the asymptotic analyses., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Do et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

In today's health-monitoring applications, there is a growing demand for wireless and wearable acquisition platforms capable of simultaneously gathering multiple bio-signals from multiple body areas. These systems require well-structured software architectures, both to keep different wireless sensing nodes synchronized each other and to flush collected data towards an external gateway. This paper presents a quantitative analysis aimed at validating both the wireless synchronization task (implemented with a custom protocol) and the data transmission task (implemented with the BLE protocol) in a prototype wearable monitoring platform. We evaluated seven frequencies for exchanging synchronization packets (10 Hz, 20 Hz, 30 Hz, 40 Hz, 50 Hz, 60 Hz, 70 Hz) as well as two different BLE configurations (with and without the implementation of a dynamic adaptation of the BLE Connection Interval parameter). Additionally, we tested BLE data transmission performance in five different use case scenarios. As a result, we achieved the optimal performance in the synchronization task (1.18 ticks as median synchronization delay with a Min-Max range of 1.60 ticks and an Interquartile range (IQR) of 0.42 ticks) when exploiting a synchronization frequency of 40 Hz and the dynamic adaptation of the Connection Interval. Moreover, BLE data transmission proved to be significantly more efficient with shorter distances between the communicating nodes, growing worse by 30.5% beyond 8 m. In summary, this study suggests the best-performing network configurations to enhance the synchronization task of the prototype platform under analysis, as well as quantitative details on the best placement of data collectors.

Routing protocols for underwater wireless sensor networks (UWSN) and underwater Internet of Things (IoT_UWSN) networks have expanded significantly. DBR routing protocol is one of the most critical routing protocols in UWSNs. In this routing protocol, the energy consumption of the nodes, the rate of loss of sent packets, and the rate of drop of routing packets due to node shutdown have created significant challenges. For this purpose, in a new scenario called FB-DBR, clustering is performed, and fuzzy logic and bloom filter are used in each cluster's new routing protocol in underwater wireless sensor networks. Due to the fuzzy nature of the parameters used in DBR, better results are obtained and bloom filters are used in routing tables to compensate for the deceleration. as the average number of accesses to routing table entries, dead nodes, Number of Packets Sent to Base Station (BS), Number of Packets Received at BS, Packet Dropped, and Remaining Energy has improved significantly., Competing Interests: The authors have declared that no competing interests exist.

In the research on energy-efficient networking methods for precision agriculture, a hot topic is the energy issue of sensing nodes for individual wireless sensor networks. The sensing nodes of the wireless sensor network should be enabled to provide better services with limited energy to support wide-range and multi-scenario acquisition and transmission of three-dimensional crop information. Further, the life cycle of the sensing nodes should be maximized under limited energy. The transmission direction and node power consumption are considered, and the forward and high-energy nodes are selected as the preferred cluster heads or data-forwarding nodes. Taking the cropland cultivation of ginseng as the background, we put forward a particle swarm optimization-based networking algorithm for wireless sensor networks with excellent performance. This algorithm can be used for precision agriculture and achieve optimal equipment configuration in a network under limited energy, while ensuring reliable communication in the network. The node scale is configured as 50 to 300 nodes in the range of 500 × 500 m2, and simulated testing is conducted with the LEACH, BCDCP, and ECHERP routing protocols. Compared with the existing LEACH, BCDCP, and ECHERP routing protocols, the proposed networking method can achieve the network lifetime prolongation and mitigate the decreased degree and decreasing trend of the distance between the sensing nodes and center nodes of the sensor network, which results in a longer network life cycle and stronger environment suitability. It is an effective method that improves the sensing node lifetime for a wireless sensor network applied to cropland cultivation of ginseng., Competing Interests: The authors have declared that no competing interests exist.

Methods: The aim of the paper is twofold. First, we present Starviewer, a DICOM viewer developed in C++ with a core component built on top of open-source libraries. The viewer supports extensions that implement functionalities and front-ends for specific use cases. Second, we propose an adaptable evaluation framework based on a set of criteria weighted according to user needs. The framework can consider different user profiles and allow criteria to be decomposed in subcriteria and grouped in more general categories making a multi-level hierarchical structure that can be analysed at different levels of detail to make scores interpretation more comprehensible., Results: Different examples to illustrate Starviewer functionalities and its extensions are presented. In addition, the proposed evaluation framework is used to compare Starviewer with four open-source viewers regarding their functionalities for daily clinical practice. In a range from 0 to 10, the final scores are: Horos (7.7), Starviewer (6.2), Weasis (6.0), Ginkgo CADx (4.1), and medInria (3.8)., Conclusions: Starviewer provides basic and advanced features for daily image diagnosis needs as well as a modular design that enables the development of custom extensions. The evaluation framework is useful to understand and prioritize new development goals, and can be easily adapted to express different needs by altering the weights. Moreover, it can be used as a complement to maturity models., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Industrial networks are currently the only communication means designed for real-time systems used in industry. Networked control systems (NCS) are still important and commonly used type of such systems operating on shop floor. As a computerized node of NCS, a programmable logic controller (PLC) is usually used. In most cases, contemporary devices of such kind are equipped with more than one network interface of various types. Typically, only one interface is activated in NCS. Sometimes, the other is used for communication between NCS and supervisory systems. Occasionally, it is additionally involved in the data transmission in the factory IT systems. In general, however, using a single network interface is a more common solution. In this paper, the mutual utilization of more than one interface is discussed in order to back up the NCS network and to manage the node-related traffic within the scope of higher level services. The question of dependability of such a system from the electromagnetic compatibility point of view is discussed. The example is provided based on Profinet via wired and wireless connection., Competing Interests: The authors have declared that no competing interests exist.

The data layer devices in the Software Defined Network (SDN) play an important role in packet forwarding. However, whether the forwarding task can be efficiently completed by the node has not attracted enough attention. A method called TrustBlock is proposed in this paper, which introduces trust as a security attribute in SDN routing planning. Besides, in order to enhance the integrity and controllability of trust evaluation, the double-layer blockchain architecture is established. In the first layer, the behavior data of the node is recorded, and then the trust calculation is performed in the second layer. In the evaluation model, nodes' trust is calculated from three aspects: direct trust, indirect trust and historical trust. Firstly, from the perspective of security, blockchain is used to achieve identity authentication of nodes, after that, from the perspective of reliability, the forwarding status is used to calculate the trust value. Secondly, consensus algorithm is used to filter malicious recommendation trust value and prevent colluding attacks. Finally, the adaptive historical trust weight is designed to prevent the periodic attack. In this paper, the entropy method is used to determine the weight of each evaluation attribute, which can avoid the problem that the subjective judgment method is not adaptable to the weight setting. Simulation results show that the detection rate of the TrustBlock is up to 98.89%, which means this model can effectively identify the abnormal nodes in SDN. Moreover, it is attractive in terms of integrity and controllability., Competing Interests: The authors have declared that no competing interests exist.

The growing need for food worldwide requires the development of a high-performance, high-productivity, and sustainable agriculture, which implies the introduction of new technologies into monitoring activities related to control and decision-making. In this regard, this paper presents a hierarchical structure based on the collaboration between unmanned aerial vehicles (UAVs) and federated wireless sensor networks (WSNs) for crop monitoring in precision agriculture. The integration of UAVs with intelligent, ground WSNs, and IoT proved to be a robust and efficient solution for data collection, control, analysis, and decisions in such specialized applications. Key advantages lay in online data collection and relaying to a central monitoring point, while effectively managing network load and latency through optimized UAV trajectories and in situ data processing. Two important aspects of the collaboration were considered: designing the UAV trajectories for efficient data collection and implementing effective data processing algorithms (consensus and symbolic aggregate approximation) at the network level for the transmission of the relevant data. The experiments were carried out at a Romanian research institute where different crops and methods are developed. The results demonstrate that the collaborative UAV-WSN-IoT approach increases the performances in both precision agriculture and ecological agriculture.

The fundamental utility of the Large-Scale Visual Sensor Networks (LVSNs) is to monitor specified events and to transmit the detected information back to the sink for achieving the data aggregation purpose. However, the events of interest are usually not uniformly distributed but frequently detected in certain regions in real-world applications. It implies that when the events frequently picked up by the sensors in the same region, the transmission load of LVSNs is unbalanced and potentially cause the energy hole problem. To overcome this kind of problem for network lifetime, a Comprehensive Visual Data Gathering Network Architecture (CDNA), which is the first comparatively integrated architecture for LVSNs is designed in this paper. In CDNA, a novel α-hull based event location algorithm, which is oriented from the geometric model of α-hull, is designed for accurately and efficiently detect the location of the event. In addition, the Chi-Square distribution event-driven gradient deployment method is proposed to reduce the unbalanced energy consumption for alleviating energy hole problem. Moreover, an energy hole repairing method containing an efficient data gathering tree and a movement algorithm is proposed to ensure the efficiency of transmitting and solving the energy hole problem. Simulations are made for examining the performance of the proposed architecture. The simulation results indicate that the performance of CDNA is better than the previous algorithms in the realistic LVSN environment, such as the significant improvement of the network lifetime., Competing Interests: The authors have declared that no competing interests exist.

Since EMF levels from wireless telecommunication networks are non-stationary and exhibit large temporal variations, the use of continuous measurements during extended periods (preferably 24 h or longer) with a data-logging system is required. Because of the short-term variations of E field, the 6-min measurements and 6-min averaged results to obtain the mean level strength at a given place appear to be dependent on the time of measurements during the day. This paper presents a new (integral-based) measure to evaluate electromagnetic exposure. The new measure is a pure physical descriptor of the amount of exposed energy density (a parameter accumulated from instantaneous power density values in time). To confirm previous observations, continuous measurements with personal exposure metre were recorded 24 h a day for two weeks at every location in urban area, 14 different locations in total. Additionally, to check temporal variations and repeatability of exposure assessment, a week of prolonged measurements was taken 6 months later, making in total three weeks of measurements at 2 locations. Day-to-day repeatability of RF-EMF exposure was analysed through the time-averaged and integral-based measure. The analysis is based on approximately 5.1 million data samples (1.7 million for each band). The ratio between the maximum and minimum instantaneous (maximum and minimum 6-min averaged) E field values during the day could reach up to 25 dB (20 dB). Therefore, great variability in the results may occur. By applying the 24 h time-averaged and integral-based measure on a 24 h data set of measurements, the variability of daily exposure could stay within ±20% of the week mean level obtained either with the time-averaged or integral-based measure. Both, the time-averaged E field and integral-based power density exposures of the general public in all locations were found to be well below the general public exposure limits of the ICNIRP guidelines., (© The Author(s) 2019. Published by Oxford University Press.)

In this work, the IEEE 802.11af technology-based wireless sensor network for health data monitoring with priority classes is proposed. In IEEE 802.11af technology, a White Space Device (WSD), a Station (STA), and an Access Point (AP) communicate through television white spectrum opportunistically without causing any harmful interference to licensed` services. In the proposed network; WSDs, STA, and AP employ Frequency Division Multiple Access (FDMA) technique with the aim of communicating through the white space spectrum determined by White Space Map (WSM). WSD collects health data such as body temperature and blood pressure from an implant or on-body sensors. The priority class is determined according to the emergency of a patient as red, yellow, and green. After obtaining the analytical model of the proposed network, the simulation model is carried out using Riverbed Modeler. The graphical results prove the validity and applicability of the proposed network in terms of delay (0.17 s) and energy consumption (4.7 mJ/s) without any spectrum cost for priority-based health data monitoring. Graphical abstract Cognitive radio based IEEE 802.11af environment for priority based health data monitoring.

Internet of Things (IoT) is the paradigm that has largely contributed to the development of smart buildings in our society. This technology makes it possible to monitor all aspects of the smart building and to improve its operation. One of the main challenges encountered by IoT networks is that the the data they collect may be unreliable since IoT devices can lose accuracy for several reasons (sensor wear, sensor aging, poorly constructed buildings, etc.). The aim of our work is to study the evolution of IoT networks over time in smart buildings. The hypothesis we have tested is that, by amplifying the Lotka-Volterra equations as a community of living organisms (an ecosystem model), the reliability of the system and its components can be predicted. This model comprises a set of differential equations that describe the relationship between an IoT network and multiple IoT devices. Based on the Lotka-Volterra model, in this article, we propose a model in which the predators are the non-precision IoT devices and the prey are the precision IoT devices. Furthermore, a third species is introduced, the maintenance staff, which will impact the interaction between both species, helping the prey to survive within the ecosystem. This is the first Lotka-Volterra model that is applied in the field of IoT. Our work establishes a proof of concept in the field and opens a wide spectrum of applications for biology models to be applied in IoT.

New, emerging technologies, transform every day our life and have direct consequence on our health and well-being. More and more wearable medical devices (MD) with wireless communication technologies embedded are being developed by innovative academic community and companies. Optical wireless communication (OWC) consisting of Visible Light Communication (VLC), infrared (IR), Optical Camera Communication (OCC) and Light Fidelity (LiFi) along with the conventional Radio Frequency (RF) wireless communication are suitable technologies to be used for hybrid Wireless Integrated Medical Assistance Systems (WIMAS). The WIMAS addressed in this paper consists of two Wireless Medical Body Area Networks (WMBAN) (an insulin wearable kit and an ECG test device with VLC/OCC are considered) and an Emergency Remote Medical Assistance (ERMA) with LiFi technology embedded. Using RF in medical facilities is subject of strict regulations due to interferences with other RF medical devices, negative effects on human health and lack of security. VLC and OCC are suitable to be embedded in MDs in order to be used by the patients with wearable WMBAN. Research on IR transdermal communication for implantable MDs has also been demonstrated as feasible and both VLC and OCC have promising future, as well. On the other hand, LiFi technology, recently deployed on the market, is mature enough to be integrated in the ERMA system addressed here.

An efficiently unlimited address space is provided by Internet Protocol version 6 (IPv6). It aims to accommodate thousands of hundreds of unique devices on a similar link. This can be achieved through the Duplicate Address Detection (DAD) process. It is considered one of the core IPv6 network's functions. It is implemented to make sure that IP addresses do not conflict with each other on the same link. However, IPv6 design's functions are exposed to security threats like the DAD process, which is vulnerable to Denial of Service (DoS) attack. Such a threat prevents the host from configuring its IP address by responding to each Neighbor Solicitation (NS) through fake Neighbor Advertisement (NA). Various mechanisms have been proposed to secure the IPv6 DAD procedure. The proposed mechanisms, however, suffer from complexity, high processing time, and the consumption of more resources. The experiments-based findings revealed that all the existing mechanisms had failed to secure the IPv6 DAD process. Therefore, DAD-match security technique is proposed in this study to efficiently secure the DAD process consuming less processing time. DAD-match is built based on SHA-3 to hide the exchange tentative IP among hosts throughout the process of DAD in an IPv6 link-local network. The obtained experimental results demonstrated that the DAD-match security technique achieved less processing time compared with the existing mechanisms as it can resist a range of different threats like collision and brute-force attacks. The findings concluded that the DAD-match technique effectively prevents the DoS attack during the DAD process. The DAD-match technique is implemented on a small area IPv6 network; hence, the author future work is to implement and test the DAD-match technique on a large area IPv6 network., Competing Interests: The authors have declared that no competing interest exist.

This work discusses video communications over wireless networks (IEEE 802.11ac standard). The videos are in three different resolutions: 720p, 1080p, and 2160p. It is essential to study the performance of these media in access technologies to enhance the current coding and communications techniques. This study sets out a video quality prediction model that includes the different resolutions that are based on wireless network terms and conditions, an approach that has not previously been adopted in the literature. The model involves obtaining Service and Experience Quality Metrics, such as PSNR (Peak Signal-to-Noise Ratio) and packet loss. This article outlines a methodology and mathematical model for video quality loss in the wireless network from simulated data and its accuracy is ensured through the use of performance metrics (RMSE and Standard Deviation). The methodology is based on two mathematical functions, (logarithmic and exponential), and their parameters are defined by linear regression. The model obtained RMSE values and standard deviation of 2.32 dB and 2.2 dB for the predicted values, respectively. The results should lead to a CODEC (Coder-Decoder) improvement and contribute to a better wireless networks design., Competing Interests: The authors have declared that no competing interests exist.

The design of wireless sensor nodes for animal tracking is a multidisciplinary activity that presents several research challenges both from a technical and a biological point of view. A monitoring device has to be designed accounting for all system requirements including the specific characteristics of animals and environment. In this work we present some aspects of the design of a wireless sensor node to track and monitor the pink iguana of the Galápagos: a recently discovered species living in remote locations at the Galápagos Islands. The few individuals of this species live in a relatively small area that lacks of any available communication infrastructure. We present and discuss the energy harvesting architecture and the related energy management logic. We also discuss the impact of packaging on the sensor performance and the consequences of the limited available energy on the GPS tracking., Competing Interests: The authors declare no conflict of interest.

This paper proposes a power-system protection device designed to be integrated in smart environments based on Internet-of-Things technologies. The proposed system enhances electrical safety by fast disconnection of the power supply in case of fault events like leakage current, electrical arc, overcurrent or overvoltage and has been designed with the goal to be integrated in smart environments like smart homes or smart cities for protecting the electrical equipment. The system also enables real-time monitoring and notification events through an advanced communication interface using a data concentrator architecture. This paper provides an extended description of the proposed system's design and implementation, as well as the experimental validation results., Competing Interests: The authors have declared that no competing interests exist.

Modeling of background radiation for the urban environment plays an important role in homeland security. However, background radiation is difficult to assess due to its spatial-temporal fluctuations caused by the variation in soil composition, building materials, and weather patterns etc. To address the challenge of background radiation modeling, we developed a mobile sensor network to continuously monitor the background radiation; we also proposed a maximum likelihood estimation algorithm to decouple and estimate the background's spatial distribution and temporal fluctuation. Experimental results demonstrated how this background radiation monitoring system accurately recognized high background regions in the experimental area, and successfully captured temporal fluctuation trends of background radiation during rains. Our system provides an efficient solution to model the temporal fluctuation and spatial distribution of background radiation., Competing Interests: The authors have declared that no competing interests exist.

The application of a Bluetooth skin resistance sensor in assisting people with Autism Spectrum Disorders (ASD), in their day-to-day work, is presented in this paper. The design and construction of the device are discussed. The authors have considered the best placement of the sensor, on the body, to gain the most accurate readings of user stress levels, under various conditions. Trial tests were performed on a group of sixteen people to verify the correct functioning of the device. Resistance levels were compared to those from the reference system. The placement of the sensor has also been determined, based on wearer convenience. With the Bluetooth Low Energy block, users can be notified immediately about their abnormal stress levels via a smartphone application. This can help people with ASD, and those who work with them, to facilitate stress control and make necessary adjustments to their work environment.

Environmental Control Units (ECU) are devices or a system that allows a person to control appliances in their home or work environment. Such system can be utilized by clients with physical and/or functional disability to enhance their ability to control their environment, to promote independence and improve their quality of life. Over the last several years, there have been an emergence of several inexpensive, commercially-available, voice activated smart speakers into the market such as Google Home and Amazon Echo. These smart speakers are equipped with far field microphone that supports voice recognition, and allows for complete hand-free operation for various purposes, including for playing music, for information retrieval, and most importantly, for environmental control. Clients with disability could utilize these features to turn the unit into a simple ECU that is completely voice activated and wirelessly connected to appliances. Smart speakers, with their ease of setup, low cost and versatility, may be a more affordable and accessible alternative to the traditional ECU. Implications for Rehabilitation Environmental Control Units (ECU) enable independence for physically and functionally disabled clients, and reduce burden and frequency of demands on carers. Traditional ECU can be costly and may require clients to learn specialized skills to use. Smart speakers have the potential to be used as a new-age ECU by overcoming these barriers, and can be used by a wider range of clients.

The manuscript describes WarpEngine, a novel platform implemented within the VEGA ZZ suite of software for performing distributed simulations both in local and wide area networks. Despite being tailored for structure-based virtual screening campaigns, WarpEngine possesses the required flexibility to carry out distributed calculations utilizing various pieces of software, which can be easily encapsulated within this platform without changing their source codes. WarpEngine takes advantages of all cheminformatics features implemented in the VEGA ZZ program as well as of its largely customizable scripting architecture thus allowing an efficient distribution of various time-demanding simulations. To offer an example of the WarpEngine potentials, the manuscript includes a set of virtual screening campaigns based on the ACE data set of the DUD-E collections using PLANTS as the docking application. Benchmarking analyses revealed a satisfactory linearity of the WarpEngine performances, the speed-up values being roughly equal to the number of utilized cores. Again, the computed scalability values emphasized that a vast majority (i.e., >90%) of the performed simulations benefit from the distributed platform presented here. WarpEngine can be freely downloaded along with the VEGA ZZ program at www.vegazz.net .

Wireless ad hoc networks can experience extreme fluctuations in transmission traffic in the Internet of Things, which is widely used today. Currently, the most crucial issues requiring attention for wireless ad hoc networks are making the best use of low traffic periods, reducing congestion during high traffic periods, and improving transmission performance. To solve these problems, the present paper proposes a novel cross-layer transmission model based on decentralized coded caching in the physical layer and a content division multiplexing scheme in the media access control layer. Simulation results demonstrate that the proposed model effectively addresses these issues by substantially increasing the throughput and successful transmission rate compared to existing protocols without a negative influence on delay, particularly for large scale networks under conditions of highly contrasting high and low traffic periods.

Today's landscape of medical devices is dominated by stand-alone systems and proprietary interfaces lacking cross-vendor interoperability. This complicates or even impedes the innovation of novel, intelligent assistance systems relying on the collaboration of medical devices. Emerging approaches use the service-oriented architecture (SOA) paradigm based on Internet protocol (IP) to enable communication between medical devices. While this works well for scenarios with no or only soft timing constraints, the underlying best-effort communication scheme is insufficient for time critical data. Real-time (RT) networks are able to reliably guarantee fixed latency boundaries, for example, by using time division multiple access (TDMA) communication patterns. However, deterministic RT networks come with their own limitations such as tedious, inflexible configuration and a more restricted bandwidth allocation. In this contribution we overcome the drawbacks of both approaches by describing and implementing mechanisms that allow the two networks to interact. We introduce the first implementation of a medical device network that offers hard RT guarantees for control and sensor data and integrates into SOA networks. Based on two application examples we show how the flexibility of SOA networks and the reliability of RT networks can be combined to achieve an open network infrastructure for medical devices in the operating room (OR).

Background: Local hospitals must deal with large numbers of patients during mass casualty incidents, and the wireless sensor networks (WSNs) can help in these situations by monitoring vital signs. Conventional ZigBee nodes can obtain the ID of a device by assigning a unique 16-bit short address or by burning firmware into an IC. These methods tend to complicate node management and lack portability., Objective: The study developed a node management mechanism to deal with a large number of patients in real-time, through the wireless monitoring of physiological signals. The mechanism proposed for the ZigBee WSN is based on a three-layer (Coordinator, Control Router, and End Device) tree topology., Methods: The proposed system includes a node deployment process to formulate a ZigBee WSN as a tree topology, an algorithm to automatically number ZigBee nodes for monitoring and control system (MCS), and an algorithm to automatically obtain the short addresses of nodes for data collection. Specifically, an algorithm automatically collects data from ZigBee nodes for display on a computer graphical user interface (GUI). We also developed a reliable data transmission method capable of resolving the problem of packet loss., Results: The proposed method has been applied in a local hospital. Our research findings provide a valuable reference for the development of ZigBee-based MCS., Conclusions: The proposed node management mechanism is faster, more reliable, and more intuitive to use, than traditional methods.

Wireless body area network (WBAN) is a breakthrough technology in healthcare areas such as hospital and telemedicine. The human body has a complex mixture of different tissues. It is expected that the nature of propagation of electromagnetic signals is distinct in each of these tissues. This forms the base for the WBAN, which is different from other environments. In this paper, the knowledge of Ultra Wide Band (UWB) channel is explored in the WBAN (IEEE 802.15.6) system. The measurements of parameters in frequency range from 3.1-10.6 GHz are taken. The proposed system, transmits data up to 480 Mbps by using LDPC coded APSK Modulated Differential Space-Time-Frequency Coded MB-OFDM to increase the throughput and power efficiency.

Objective: Closed-loop experiments provide unique insights into brain dynamics and function. To facilitate a wide range of closed-loop experiments, we created an open-source software platform that enables high-performance real-time processing of streaming experimental data., Approach: We wrote Falcon, a C++ multi-threaded software in which the user can load and execute an arbitrary processing graph. Each node of a Falcon graph is mapped to a single thread and nodes communicate with each other through thread-safe buffers. The framework allows for easy implementation of new processing nodes and data types. Falcon was tested both on a 32-core and a 4-core workstation. Streaming data was read from either a commercial acquisition system (Neuralynx) or the open-source Open Ephys hardware, while closed-loop TTL pulses were generated with a USB module for digital output. We characterized the round-trip latency of our Falcon-based closed-loop system, as well as the specific latency contribution of the software architecture, by testing processing graphs with up to 32 parallel pipelines and eight serial stages. We finally deployed Falcon in a task of real-time detection of population bursts recorded live from the hippocampus of a freely moving rat., Main Results: On Neuralynx hardware, round-trip latency was well below 1 ms and stable for at least 1 h, while on Open Ephys hardware latencies were below 15 ms. The latency contribution of the software was below 0.5 ms. Round-trip and software latencies were similar on both 32- and 4-core workstations. Falcon was used successfully to detect population bursts online with ~40 ms average latency., Significance: Falcon is a novel open-source software for closed-loop neuroscience. It has sub-millisecond intrinsic latency and gives the experimenter direct control of CPU resources. We envisage Falcon to be a useful tool to the neuroscientific community for implementing a wide variety of closed-loop experiments, including those requiring use of complex data structures and real-time execution of computationally intensive algorithms, such as population neural decoding/encoding from large cell assemblies.

Some frame components, such as SYNC (frame synchronization) and RTS/CTS (Ready to Send/Clear to Send), are not taken into consideration when the traditional setting strategies conduct the optimization of SMAC (Sensor MAC) contention window size. This paper proposes mathematical models that allow the analysis of data packets forwarding delay within one SMAC virtual cluster. Simulation results in OMNeT++ show good agreements with the proposed mathematical models, validating the models' correctness. The curve analyses of the models confirm the existence of delay-optimization-oriented contention window size that is closely related to the number of simultaneously contending nodes. Afterwards, it is shown that SYNC, RTS/CTS and EIFS (Extended InterFrame Space) have impacts on the optimal contention window size and expected delivery delay to various degrees, as well as throughput and energy efficiency. One ideal setting strategy of delay-optimization-oriented SMAC contention window size requires the combination of the network scale, SYNC, RTS/CTS and EIFS. Additionally, it is demonstrated that the proposed setting strategy makes contributions to the improvement in the existing SMAC extensions when they are integrated with each other, in terms of the end-to-end delay, throughput and energy consumption.

Wireless Sensor Networks (WSNs) are becoming ubiquitous in everyday life due to their applications in weather forecasting, surveillance, implantable sensors for health monitoring and other plethora of applications. WSN is equipped with hundreds and thousands of small sensor nodes. As the size of a sensor node decreases, critical issues such as limited energy, computation time and limited memory become even more highlighted. In such a case, network lifetime mainly depends on efficient use of available resources. Organizing nearby nodes into clusters make it convenient to efficiently manage each cluster as well as the overall network. In this paper, we extend our previous work of grid-based hybrid network deployment approach, in which merge and split technique has been proposed to construct network topology. Constructing topology through our proposed technique, in this paper we have used analytical network process (ANP) model for cluster head selection in WSN. Five distinct parameters: distance from nodes (DistNode), residual energy level (REL), distance from centroid (DistCent), number of times the node has been selected as cluster head (TCH) and merged node (MN) are considered for CH selection. The problem of CH selection based on these parameters is tackled as a multi criteria decision system, for which ANP method is used for optimum cluster head selection. Main contribution of this work is to check the applicability of ANP model for cluster head selection in WSN. In addition, sensitivity analysis is carried out to check the stability of alternatives (available candidate nodes) and their ranking for different scenarios. The simulation results show that the proposed method outperforms existing energy efficient clustering protocols in terms of optimum CH selection and minimizing CH reselection process that results in extending overall network lifetime. This paper analyzes that ANP method used for CH selection with better understanding of the dependencies of different components involved in the evaluation process.

Rural areas have very low revenue potential. The major issue in providing low-cost broadband to rural areas is to provide reliable backhaul connections that spread over tens or even hundreds of miles, connecting villages to the nearest service provider. Along with aerial networks of Google and Facebook, there has been a considerable amount of research toward long-distance terrestrial WiFi links. As a comparison, WiFi routers are easier to be deployed and maintained by non-technical people from the local communities, whereas the aerial networks require professional support to operate. Moreover, they are still in the experimentation phase. However, the long distance WiFi links require high-gain directional antennas and very expensive tall towers for high data rates. On the other hand, multihop paths with stronger links may provide better data rates without the need of tall towers. In this paper, we evaluated the concept of using such multihop WiFi links for long backhaul connections. Our simulation results show that these networks can possibly be a cost-effective and practical solution for rural connectivity. These initial results can serve as a first step to understand the comprehensive feasibility of using multihop WiFi networks for backhaul connections in rural area.

The deployment of large number of femtocell base stations allows us to extend the coverage and efficiently utilize resources in a low cost manner. However, the small cell size of femtocell networks can result in frequent handovers to the mobile user, and consequently throughput degradation. Thus, in this paper, we propose predictive association control schemes to improve the system's effective throughput. Our design focuses on reducing handover frequency without impacting on throughput. The proposed schemes determine handover decisions that contribute most to the network throughput and are proper for distributed implementations. The simulation results show significant gains compared with existing methods in terms of handover frequency and network throughput perspective.

The construction of data center network by applying SDN technology has become a hot research topic. The SDN architecture has innovatively separated the control plane from the data plane which makes the network more software-oriented and agile. Moreover, it provides virtual multi-tenancy, effective scheduling resources and centralized control strategies to meet the demand for cloud computing data center. However, the explosion of network information is facing severe challenges for SDN controller. The flow storage and lookup mechanisms based on TCAM device have led to the restriction of scalability, high cost and energy consumption. In view of this, a source-controlled data center network (SCDCN) model is proposed herein. The SCDCN model applies a new type of source routing address named the vector address (VA) as the packet-switching label. The VA completely defines the communication path and the data forwarding process can be finished solely relying on VA. There are four advantages in the SCDCN architecture. 1) The model adopts hierarchical multi-controllers and abstracts large-scale data center network into some small network domains that has solved the restriction for the processing ability of single controller and reduced the computational complexity. 2) Vector switches (VS) developed in the core network no longer apply TCAM for table storage and lookup that has significantly cut down the cost and complexity for switches. Meanwhile, the problem of scalability can be solved effectively. 3) The SCDCN model simplifies the establishment process for new flows and there is no need to download flow tables to VS. The amount of control signaling consumed when establishing new flows can be significantly decreased. 4) We design the VS on the NetFPGA platform. The statistical results show that the hardware resource consumption in a VS is about 27% of that in an OFS.

Designing a Wireless Sensor Network (WSN) to achieve a high Quality of Service (QoS) (network performance and durability) is a challenging problem. We address it by focusing on the performance of the 802.15.4 communication protocol because the IEEE 802.15.4 Standard is actually considered as one of the reference technologies in WSNs. In this paper, we propose to control the sustainable use of resources (i.e., energy consumption, reliability and timely packet transmission) of a wireless sensor node equipped with photovoltaic cells by an adaptive tuning not only of the MAC (Medium Access Control) parameters but also of the sampling frequency of the node. To do this, we use one of the existing control approaches, namely the viability theory, which aims to preserve the functions and the controls of a dynamic system in a set of desirable states. So, an analytical model, describing the evolution over time of nodal resources, is derived and used by a viability algorithm for the adaptive tuning of the IEEE 802.15.4 MAC protocol. The simulation analysis shows that our solution allows ensuring indefinitely, in the absence of hardware failure, the operations (lifetime duration, reliability and timely packet transmission) of an 802.15.4 WSN and one can temporarily increase the sampling frequency of the node beyond the regular sampling one. This latter brings advantages for agricultural and environmental applications such as precision agriculture, flood or fire prevention. Main results show that our current approach enable to send more information when critical events occur without the node runs out of energy. Finally, we argue that our approach is generic and can be applied to other types of WSN.

We study secondary random access in multi-input multi-output cognitive radio networks, where a slotted ALOHA-type protocol and successive interference cancellation are used. We first introduce three types of transmit beamforming performed by secondary users, where multiple antennas are used to suppress the interference at the primary base station and/or to increase the received signal power at the secondary base station. Then, we show a simple decentralized power allocation along with the equivalent single-antenna conversion. To exploit the multiuser diversity gain, an opportunistic transmission protocol is proposed, where the secondary users generating less interference are opportunistically selected, resulting in a further reduction of the interference temperature. The proposed methods are validated via computer simulations. Numerical results show that increasing the number of transmit antennas can greatly reduce the interference temperature, while increasing the number of receive antennas leads to a reduction of the total transmit power. Optimal parameter values of the opportunistic transmission protocol are examined according to three types of beamforming and different antenna configurations, in terms of maximizing the cognitive transmission capacity. All the beamforming, decentralized power allocation, and opportunistic transmission protocol are performed by the secondary users in a decentralized manner, thus resulting in an easy implementation in practice., Competing Interests: The authors have declared that no competing interests exist.

Big Data is no longer solely the purview of big organizations with big resources. Today's routine tools and experimental methods can generate large slices of data. For example, high-throughput sequencing can quickly interrogate biological systems for the expression levels of thousands of different RNAs, examine epigenetic marks throughout the genome, and detect differences in the genomes of individuals. Multichannel electrophysiology platforms produce gigabytes of data in just a few minutes of recording. Imaging systems generate videos capturing biological behaviors over the course of days. Thus, any researcher now has access to a veritable wealth of data. However, the ability of any given researcher to utilize that data is limited by her/his own resources and skills for downloading, storing, and analyzing the data. In this paper, we examine the necessary resources required to engage Big Data, survey the state of modern data analysis pipelines, present a few data repository case studies, and touch on current institutions and programs supporting the work that relies on Big Data., (© 2016 New York Academy of Sciences.)

Access to experimental X-ray diffraction image data is important for validation and reproduction of macromolecular models and indispensable for the development of structural biology processing methods. In response to the evolving needs of the structural biology community, we recently established a diffraction data publication system, the Structural Biology Data Grid (SBDG, data.sbgrid.org), to preserve primary experimental datasets supporting scientific publications. All datasets published through the SBDG are freely available to the research community under a public domain dedication license, with metadata compliant with the DataCite Schema (schema.datacite.org). A proof-of-concept study demonstrated community interest and utility. Publication of large datasets is a challenge shared by several fields, and the SBDG has begun collaborating with the Institute for Quantitative Social Science at Harvard University to extend the Dataverse (dataverse.org) open-source data repository system to structural biology datasets. Several extensions are necessary to support the size and metadata requirements for structural biology datasets. In this paper, we describe one such extension-functionality supporting preservation of file system structure within Dataverse-which is essential for both in-place computation and supporting non-HTTP data transfers., (© 2016 New York Academy of Sciences.)

This paper defines the attributes of distributed data networks and outlines the data and analytic infrastructure needed to build and maintain a successful network. We use examples from one successful implementation of a large-scale, multisite, healthcare-related distributed data network, the U.S. Food and Drug Administration-sponsored Sentinel Initiative. Analytic infrastructure-development concepts are discussed from the perspective of promoting six pillars of analytic infrastructure: consistency, reusability, flexibility, scalability, transparency, and reproducibility. This paper also introduces one use case for machine learning algorithm development to fully utilize and advance the portfolio of population health analytics, particularly those using multisite administrative data sources., (© 2016 New York Academy of Sciences.)

Telemedicine has become an effective means of delivering quality healthcare in the world. Across the African continent, Telemedicine is increasingly being recognized as a way of improving access to quality healthcare. The use of technology to deliver quality healthcare has been demonstrated as an effective way of overcoming geographic barriers to healthcare in pilot Telemedicine projects in certain parts of Kumasi, Ghana. However because of poor network connectivity experienced in the pilot projects, the success of the pilot networks could not be extended to cover the whole city of Kumasi and other surrounding villages. Fortunately, recent deployment of WiMAX in Ghana has delivered higher data rates at longer distances with improved network connectivity. This paper examines the feasibility of using WiMAX in deploying a city wide Mobile Telemedicine solution. The network architecture and network parameter simulations of the proposed Mobile Telemedicine network using WiMAX are presented. Five WiMAX Base Stations have been suggested to give ubiquitous coverage to the proposed Mobile Telemedicine sites in the network using adaptive 4 × 4 MIMO antenna configurations.

With a more Internet-savvy and sophisticated user base, there are more demands for interactive applications and services. However, it is a challenge for existing radio access networks (e.g. 3G and 4G) to cope with the increasingly demanding requirements such as higher data rates and wider coverage area. One potential solution is the inter-collaborative deployment of multiple radio devices in a 5G setting designed to meet exacting user demands, and facilitate the high data rate requirements in the underlying networks. These heterogeneous 5G networks can readily resolve the data rate and coverage challenges. Networks established using the hybridization of existing networks have diverse military and civilian applications. However, there are inherent limitations in such networks such as irregular breakdown, node failures, and halts during speed transmissions. In recent years, there have been attempts to integrate heterogeneous 5G networks with existing ad hoc networks to provide a robust solution for delay-tolerant transmissions in the form of packet switched networks. However, continuous connectivity is still required in these networks, in order to efficiently regulate the flow to allow the formation of a robust network. Therefore, in this paper, we present a novel network formation consisting of nodes from different network maneuvered by Unmanned Aircraft (UA). The proposed model utilizes the features of a biological aspect of genomes and forms a delay tolerant network with existing network models. This allows us to provide continuous and robust connectivity. We then demonstrate that the proposed network model has an efficient data delivery, lower overheads and lesser delays with high convergence rate in comparison to existing approaches, based on evaluations in both real-time testbed and simulation environment., Competing Interests: The authors have declared that no competing interests exist.

Because of the limited resources on radio access channels of third generation partnership projection (3GPP) network, one of the most challenging tasks posted by 3GPP cellular-based machine type communications (MTC) is congestion due to massive requests for connection to radio access network (RAN). In this paper, an overload control algorithm in 3GPP RAN is proposed, which proactively disperses the simultaneous access attempts in evenly distributed time window. Through periodic reservation strategy, massive access requests of MTC devices are dispersed in time, which reduces the probability of confliction of signaling. By the compensation and prediction mechanism, each device can communicate with MTC server with dynamic load of air interface. Numerical results prove that proposed method makes MTC applications friendly to 3GPP cellular network., Competing Interests: The authors have declared that no competing interests exist.

In heterogeneous wireless networks, wireless local area network (WLAN) is highly preferred by mobile terminals (MTs) owing to its high transmission bandwidth and low access cost. However, in high-speed environment, handover from a cellular network to a WLAN cell will lead to a high number of handover failures and unnecessary handovers due to the WLAN coverage limitation and will become worse at high speed. A new vertical handover method is proposed to minimize the probability of handover failure and unnecessary handover while maximizing the usage of WLAN in high-speed environment. The simulation results show that the proposed method kept the probability of handover failure and unnecessary handover below 0.5% and 1%, respectively. Compared with previous studies, the proposed method reduced the number of handover failures and unnecessary handovers up to 80.0% and 97.7%, respectively, while the MT is highly mobile. Using the proposed prediction method, the MT can benefit high bandwidth and low network access cost from the WLAN with minimum interruption regardless of speed., Competing Interests: The authors have declared that no competing interests exist.

This paper presents a novel, practical, and effective routine to reconstruct missing samples from a time-domain sequence of wirelessly transmitted IMU data during high-level mobility activities. Our work extends previous approaches involving empirical mode decomposition (EMD)-based and auto-regressive (AR) model-based interpolation algorithms in two aspects: 1) we utilized a modified sifting process for signal decomposition into a set of intrinsic mode functions with missing samples, and 2) we expand previous AR modeling for recovery of audio signals to exploit the quasi-periodic characteristics of lower-limb movement during the modified Edgren side step test. To verify the improvements provided by the proposed extensions, a comparison study of traditional interpolation methods, such as cubic spline interpolation, AR model-based interpolations, and EMD-based interpolation is also made via simulation with real inertial signals recorded during high-speed movement. The evaluation was based on two performance criteria: Euclidian distance and Pearson correlation coefficient between the original signal and the reconstructed signal. The experimental results show that the proposed method improves upon traditional interpolation methods used in recovering missing samples.

In our recent book Health-e Everything: Wearables and the Internet of Things for Health, we capture in an interactive e-book format some global thought-leader perspectives as well as early examples of case studies and novel innovations that are driving this emerging technology domain. Here, we provide a brief snapshot of key findings related to these novel technologies and use cases, which are driving both health care practitioners and health consumers (patients). As technologists, having a firm understanding of customer-driven innovation and the actual user benefits of interconnective devices for health will help us engineer better solutions that are more targeted to the triple aim of better, faster, and cheaper health solutions.

Human body communication (HBC) provides a promising physical layer for wireless body area networks (BANs) in healthcare and medical applications, because of its low propagation loss and high security characteristics. In this study, we have developed a wearable electrocardiogram (ECG) which employs impulse radio (IR)-type HBC technology for transmitting vital signals on the human body in a wearable BAN scenario. The HBC-based wearable ECG has two excellent features. First, the wideband performance of the IR scheme contributed to very low radiation power so that the transceiver is easy to satisfy the extremely weak radio laws, which does not need a license. This feature can provide big convenience in the use and spread of the wearable ECG. Second, the realization of common use of sensing and transmitting electrodes based on time sharing and capacitive coupling largely simplified the HBC-based ECG structure and contributed to its miniaturization. To verify the validity of the HBC-based ECG, we evaluated its communication performance and ECG acquisition performance. The measured bit error rate, smaller than 10 -3 at 1.25 Mb/s, showed a good physical layer communication performance, and the acquired ECG waveform and various heart-rate variability parameters in time and frequency domains exhibited good agreement with a commercially available radio-frequency ECG and a Holter ECG. These results sufficiently showed the validity and feasibility of the HBC-based ECG for healthcare applications. This should be the first time to have realized a real-time ECG transmission by using the HBC technology.