Search

Background: The Latarjet procedure was developed for the treatment of anterior shoulder instability in young, high-demand patients with attritional glenoid bone loss, whose risk of redislocation following primary dislocation may exceed 90%. Coracoid graft osteolysis and prominent screws are commonly observed in late computed tomography (CT) scans of patients who re-present following the procedure, but the clinical relevance of osteolysis in the overall Latarjet cohort is undetermined. We aimed to evaluate clinical and radiological outcomes in patients who underwent the Latarjet procedure, and to determine if severe coracoid graft osteolysis compromised clinical outcomes. Methods: This was a retrospective analysis of patients who underwent the open Latarjet procedure. Patients were invited via an e-questionnaire that contained a Western Ontario Shoulder Instability Index (WOSI), and queried about redislocation and reoperation since index surgery. Preoperative glenoid bone loss was calculated on CT using the best-fit circle method. Osteolysis was graded (0, screw head buried in graft; 1, screw head exposed; 2, threads exposed; 3, complete resorption/severe osteolysis) at the level of the proximal and distal screws respectively, on axial CT scans performed ≥ 12 months postoperatively. Results: Between 2011 and 2022, a single surgeon performed 442 Latarjet procedures. One hundred fifty eight patients responded to the questionnaire at median (interquartile range [IQR]) 44 (27-70) months postoperatively, among whom the median (IQR) WOSI score was 352 (142-666) points (0 = best, 2100 = worst). Recurrent anterior instability occurred in 3/158 (2%) patients. One patient required reoperation for this indication. Among patients who had CT scans ≥ 12 months postoperatively (median [IQR] 40 [29-69] months), 1 patient developed severe osteolysis around both screws (WOSI = 90), 17/62 (27%) patients developed severe osteolysis around 1 screw, all of which were proximal (median [IQR] WOSI = 235 [135-644]), and 44/62 (71%) patients did not develop severe osteolysis around either screw (median [IQR] WOSI = 487 [177-815]). There were no statistically significant differences in WOSI scores between groups based on the presence of severe osteolysis. Conclusion: The Latarjet is reliable procedure that has a low rate of redislocation and reoperation. Severe coracoid graft osteolysis occurs with time, and always affects the proximal graft first. The presence of severe osteolysis did not compromise clinical outcomes.

Purpose: To determine the short-term complication rates following open reduction and internal fixation of scapula fractures, factors affecting the development of adverse events, and complication rates based on the anatomic location of the fracture. Methods: Thirty-day complication rates for patients who underwent open reduction and internal fixation of the scapula were compared between glenoid, body, coracoid, and acromion fracture locations, as identified by International Classification of Disease codes. Possible adverse events included postoperative surgical site infection, renal insufficiency, intubation, pneumonia, deep vein thrombosis, pulmonary embolism, urinary tract infection, wound dehiscence, stroke, and blood transfusion. Results: A total of 251 scapula fractures were identified, with 161 having known fracture locations: 105 glenoid, 20 body, 9 coracoid, and 27 acromial fractures. The rate of any adverse event for all scapular fractures was 2.0%, with no significant difference between anatomic locations (p = 0.79). The overall rates of transfusion, surgical site infection, and return to OR were 0.4%, 0.8%, and 3.98%. Steroid use associated with a significantly increased risk of any adverse event (OR: 55.57, p = 0.038) and outpatient status demonstrated a protective effect on reoperation (OR: 0.11, p = 0.014). There were no significant differences in the rates between groups [transfusion (p = 0.91); surgical site infection (p = 0.17); reoperation (p = 0.85)]. Conclusion: Complication rates within thirty days of ORIF for scapula fracture were low. Reoperation was the most common complication, followed by surgical site infection, wound dehiscence, stroke, transfusion, and pneumonia. Steroid use was a risk factor for developing any adverse event, and outpatient status was protective against reoperation. The 30-day complication profile of glenoid, body, coracoid, and acromial fractures was not significantly different. The low complication rates support the relative short-term safety of operative intervention with internal fixation. Level of Evidence: Level III. [ABSTRACT FROM AUTHOR]

Important transformations of the pectoral girdle are related to the appearance of flight capabilities in the Dinosauria. Previous studies on this topic focused mainly on paravians yet recent data suggests flight evolved in dinosaurs several times, including at least once among non-avialan paravians. Thus, to fully explore the evolution of flightrelated avian shoulder girdle characteristics, it is necessary to compare morphology more broadly. Here, we present information from pennaraptoran specimens preserving pectoral girdle elements, including all purportedly volant taxa, and extensively compare aspects of the shoulder joint. The results show that many pectoral girdle modifications appear during the evolution from basal pennaraptorans to paravians, including changes in the orientation of the coracoid body and the location of the articulation between the furcula and scapula. These modifications suggest a change in forelimb range of motion preceded the origin of flight in paravians. During the evolution of early avialans, additional flight adaptive transformations occur, such as the separation of the scapula and coracoid and reduction of the articular surface between these two bones, reduction in the angle between these two elements, and elongation of the coracoid. The diversity of coracoid morphologies and types of articulations joining the scapulacoracoid suggest that each early avialan lineage evolved these features in parallel as they independently evolved more refined flight capabilities. In early ornithothoracines, the orientation of the glenoid fossa and location of the acrocoracoid approaches the condition in extant birds, suggesting a greater range of motion in the flight stroke, which may represent the acquisition of improved powered flight capabilities, such as ground take-off. The formation of a new articulation between the coracoid and furcula in the Ornithuromorpha is the last step in the formation of an osseous triosseal canal, which may indicate the complete acquisition of the modern flight apparatus. These morphological transitions equipped birds with a greater range of motion, increased and more efficient muscular output and while at the same time transmitting the increased pressure being generated by ever more powerful flapping movements in such a way as to protect the organs. The driving factors and functional adaptations of many of these transitional morphologies are as yet unclear although ontogenetic transitions in forelimb function observed in extant birds provide an excellent framework through which we can explore the behavior of Mesozoic pennaraptorans. [ABSTRACT FROM AUTHOR]

Background: Glenohumeral instability is a challenging problem in children and adolescents. For patients with anterior glenoid bone loss, the Latarjet procedure is an effective treatment option. However, concerns about coracoid size and morphology may limit its utilization within this patient population. The purpose of this study was to establish normative data on coracoid and glenoid size and morphology among a large cohort of adolescent patients and describe the anatomic relationships with demographic factors. Methods: This is a retrospective cross-sectional study of a consecutive series of 584 patients aged 12-21 years after a chest computed tomography scan for non-shoulder related trauma at a single level I trauma center. Demographic characteristics were collected from the electronic medical record, and the following coracoid anatomic measurements were obtained from computed tomography scans: coracoid length, coracoid thickness, coracoid width, glenoid height, and glenoid width. The ratio of coracoid thickness to glenoid width was calculated to estimate the percent bone loss that could be addressed with a traditional Latarjet coracoid transfer. To ensure reliability among 3 reviewers, all measured the same 25 scans and inter-rater reliability was excellent with all Kappa coefficients >0.81. The remaining scans were divided equally and assessed separately by these reviewers. Correlation coefficients were used to quantify the relationships between all anatomic measures and the age, weight, and height of individuals. Growth curves for each measurement were modeled using quantile regression with height and height∗height as predictors. Additionally, we stratified the growth curves by sex, when significant. Of the 584 subjects, 55% were male, and average age was 19 years (range 12, 21). Results: All growth curves illustrated increase anatomic size across the height range of 145-190 cm. The growth curve including all patients (Fig. 1) illustrated that the 50% percentile of median coracoid length increased from approximately 28 to 32 mm. In addition to height, sex was a significant predictor for coracoid width and glenoid width. The median coracoid width increased from approximately 9.5 to 10.2 mm for females compared to an increased width from approximately 10 to 11 mm for males. The median glenoid width for females increased from approximately 21 to 25 mm and for males the median glenoid width increased from just under 22 to 25.5 mm. Conclusions: Among children and adolescents, coracoid and glenoid size are correlated with patient height. These data can help guide patient selection for the Latarjet procedure.

The glenohumeral joint is one of the most commonly dislocated joints. When dislocated, the humeral head typically moves anteriorly and medially within the soft tissues adjacent to the glenoid. We present a case of a 64-year-old female who presented with a locked anterior shoulder dislocation with impaction of the humeral head onto the coracoid. To our knowledge, this is the first reported instance of humeral head impaction onto the coracoid causing the shoulder dislocation to be irreducible by closed means. Complications of this dislocation can include humeral head deformity, pseudoparalysis, brachial plexus injury, and significant pain. Level of evidence V.

The injury mechanism of acromioclavicular (AC) dislocation combined with coracoid process (CP) fracture is not clear, and there is no consensus on its treatment. This study was performed to evaluate the diagnosis of CP fractures combined with AC dislocation and the effectiveness of operative treatment using a clavicular hook plate. Eighteen patients with CP fractures combined with AC dislocation were treated with a clavicular hook plate from May 2012 to June 2021. The patients comprised 10 male and 8 female patients with an average age of 38 years (range, 16-54 years). The injury was caused by falling in 15 patients, traffic accidents in 2 patients, and falling from a height in 1 patient. The Eyres type of CP fracture was type II in 1 patient, type III in 11 patients, type IV in 3 patients, and type V in 3 patients. The Ogawa type of CP fracture was type I in 17 patients and type II in 1 patient. The Rockwood type of AC dislocation was type V in 1 patient, variation type III in 15 patients, and variation type V in 2 patients. The interval from injury to the operation was 3 days (range, 1-7 days). Postoperative complications and CP fracture healing were recorded. Functional assessment at the last follow-up was performed by an independent reviewer using the Constant score and visual analog scale score. All 18 patients were followed up for a mean period of 49 months (range, 12-123 months). Nine patients had acromion osteolysis and 3 patients had CP fracture nonunion (Eyres type II, III, and V in 1 patient each); however, no patients developed shoulder pain, incision infection, limitation of shoulder movement, clinical symptoms of subcoracoid impingement, or AC dislocation relapse. At the last follow-up, the mean Constant score was 99 (range, 94-100). The possibility of CP fracture should be considered in patients with AC dislocation to avoid a missed diagnosis. Fixation with a clavicular hook plate is a feasible treatment for CP fracture combined with AC dislocation and provides a satisfactory outcome. CP fracture healing may be related to the fracture morphology. [ABSTRACT FROM AUTHOR]

The epiphyses at the medial and lateral ends of the clavicle are small, ossify relatively late, and may not fuse until early adulthood. Because of this unique anatomy, pediatric and young adult injuries that involve the clavicle often differ from the patterns typically seen in older adults. Clavicular trauma that affects the acromioclavicular joint laterally or sternoclavicular joint medially often results in a physeal fracture and as such, can go unrecognized or be mistaken for a joint dislocation. Radiographic assessment is challenging, particularly when the epiphysis is not yet ossified. However, MR imaging allows for visualization of the cartilage, periosteum and perichondrium, and ligaments of the affected joints. Lateral clavicle physeal injuries can be categorized by the Dameron and Rockwood system, the pediatric correlate to the Rockwood classification of adult acromioclavicular joint injuries. Medial clavicle physeal fractures, similar to adult sternoclavicular joint dislocations, may result in anterior or posterior displacement. Because of their great ability to heal and remodel, clavicular physeal fractures respond better to conservative management than true acromioclavicular or sternoclavicular joint dislocations. Therefore, it is essential to recognize the true nature of these injuries, as there are implications for successful treatment and appropriate prognosis. [ABSTRACT FROM AUTHOR]

The glenohumeral joint is one of the most commonly dislocated joints. When dislocated, the humeral head typically moves anteriorly and medially within the soft tissues adjacent to the glenoid. We present a case of a 64-year-old female who presented with a locked anterior shoulder dislocation with impaction of the humeral head onto the coracoid. To our knowledge, this is the first reported instance of humeral head impaction onto the coracoid causing the shoulder dislocation to be irreducible by closed means. Complications of this dislocation can include humeral head deformity, pseudoparalysis, brachial plexus injury, and significant pain. [ABSTRACT FROM AUTHOR]

Birds generate a propulsive force by flapping their wings. They use this propulsive force for various locomotion styles, such as aerodynamic flight, wing‐paddle swimming and wing‐assisted incline running. It is therefore important to reveal the origin of flapping ability in the evolution from theropod dinosaurs to birds. However, there are no quantitative indices to reconstruct the flapping abilities of extinct forms based on their skeletal morphology. This study compares the section modulus of the coracoid relative to body mass among various extant birds to test whether the index is correlated with flapping ability. According to a survey of 220 historical bird specimens representing 209 species, 180 genera, 83 families and 30 orders, the section modulus of the coracoid relative to body mass in non‐flapping birds was significantly smaller than that of flapping birds. This indicates that coracoid strength in non‐flapping birds is deemphasised, whereas in flapping birds the strength is emphasised to withstand the contractile force produced by powerful flapping muscles, such as the m. pectoralis and m. supracoracoideus. Therefore, the section modulus of the coracoid is expected to be a powerful tool to reveal the origin of powered flight in birds. [ABSTRACT FROM AUTHOR]

Copyright of Obere Extremitat is the property of Springer Nature and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Introduction: Coracoid fractures associated with anterior shoulder dislocations are rare occurrence. Management of these condition requires good patient and radiological assessment. Treatment modalities of these fractures can vary from conservative treatment to operative fixation. Case report: We present a case of a young 30-year-old male who presented with a chronically locked anterior dislocation of the left shoulder and recurrent right shoulder dislocation with bilateral non-union of the coracoid. The right shoulder was managed by an open Latarjet's procedure and the left shoulder with a reverse shoulder arthroplasty. Conclusion: This rare case of bilateral coracoid process non-union, was associated with bilateral traumatic anterior shoulder dislocation. These fractures were diagnosed on radiography and the ununited coracoid was successfully used as bone graft for Latarjet's procedure.

Reverse total shoulder arthroplasty (RTSA) is an effective surgical method for rotator cuff tear arthropathy, irreparable cuff tear, complex fracture of the proximal humerus, and revision after anatomical total shoulder arthroplasty. As the scope of application and the number of trials have increased recently, there have been reports of scapular notching, glenoid loosening, infection or peri-scapular fractures. On the other hand, there are no reports of concomitant fractures of the coracoid and acromion after RTSA. The authors experienced two cases with concomitant fractures of the coracoid and acromion after RTSA. This paper reports these cases with a literature review and discusses the causes. [ABSTRACT FROM AUTHOR]

Objective: To observe the computerized tomography (CT) imaging manifestations of coracoid process fractures associated with acromioclavicular(AC) joint dislocation and make classification and summary, and explore a new classification of coracoid process fracture combined with acromioclavicular joint dislocation., Methods: The medical records of patients with the acute traumatic coracoid process fractures associated with AC joint dislocation who had undergone surgical management with clavicular hook plate fixation between May 2012 and June 2021 were retrospectively reviewed. Patients with fractures or dislocations of other parts of the ipsilateral upper limb, which affect the treatment and prognosis, or with chronic shoulder diseases on the affected side, which affect the function of the shoulder joint, were excluded. Eighteen patients were enrolled, including 10 males and 8 females, aged from 16 to 54 years old at the time of injury. The causes of injury were fall in 15 cases, traffic accident in 2 cases, and high fall in 1 case. The time from injury to operation ranged from 1 to 7 days. The morphology of coracoid process fracture and its corresponding relationship with scapula were observed on CT three-dimensional reconstruction images, and the reduction of coracoid process fracture was observed. The results were classified according to different manifestations and outcomes., Results: A total of 18 patients with 18 shoulders were included according to the Inclusion and exclusion criteria. Three manifestations of coracoid process fracture associated with acromioclavicular joint dislocation were observed on CT three-dimensional reconstruction images. One case was typeⅠ(avulsion fracture, coracoid process shape remained general intact), and the coracoid process fracture failed to self-reduction after AC joint reduction and fixation;Fifteen patients with type Ⅱ(hinged fracture, in which one side of the coracoid process fracture remained attached to the scapula or was less displaced than the other side of the fracture) had spontaneous reduction after AC joint reduction and fixation, even 7 of them had coracoid process fracture anatomical reduction;In 2 cases of type Ⅲ (translational fracture, coracoid process fracture with approximately parallel profile), coracoid process fracture failed to self-reduce after AC joint reduction and fixation., Conclusion: The new type of coracoid process fractures associated with acromioclavicular dislocation on CT three-dimensional reconstruction provides an overview of the injury involvement of coracoid process fracture associated with AC joint dislocation, better understand of the nature of the disease, and a reference for clinical diagnosis, treatment and prognosis to the surgeon. Based on the fact that most coracoid fractures especially hinged fractures have spontaneous reduction after AC joint reduction and fixation, we believe that simple fixation of the AC joint is feasible and satisfactory for coracoid process fractures with acromioclavicular joint dislocation, and no surgical intervention is required for coracoid process fractures.

Background: Preoperative coracoid dimensions may affect the size of the bone graft transferred to the glenoid rim and thus the postoperative outcomes of Latarjet coracoid transfer. Purpose: To determine the effect of coracoid length and width as measured on preoperative magnetic resonance imaging (MRI) on outcomes after Latarjet treatment of anterior shoulder instability. Study Design: Cohort study; Level of evidence, 3. Methods: Included were patients who underwent primary Latarjet surgery between 2009 and 2019 and had preoperative MRI scans and minimum 2-year postoperative outcomes. Longitudinal coracoid length was measured on axial MRI sequences as the distance from the coracoclavicular ligament insertion to the distal tip. Comparisons were made between shorter and longer coracoids and between narrower and wider coracoids. The outcomes of interest were recurrent instability, reoperation, complications, return to sport (RTS), and American Shoulder and Elbow Surgeons (ASES) score. Independent-samples t test, Mann-Whitney test, chi-square test, and Fisher exact test were used to compare outcomes between groups, and univariate correlation coefficients were calculated to evaluate the relationships between demographics and coracoid dimensions. Results: Overall, 56 patients were included (mean age, 28.4 years). The mean ± SD coracoid length was 21.6 ± 2.4 mm and width 10.0 ± 1.0 mm. Relative to patients with a longer coracoid (≥22 mm; n = 26), patients with a shorter coracoid (<22 mm; n = 30) had similar rates of recurrent instability (shorter vs longer; 6.7% vs 3.8%), complications (10.0% vs 15.4%), reoperation (3.3% vs 7.7%), and RTS (76.5% vs 58.8%) and similar postoperative ASES scores (85.0 vs 81.6) (P ≥.05 for all). Likewise, relative to patients with a wider coracoid (≥10 mm; n = 27), patients with a narrower coracoid (<10 mm; n = 29) had similar prevalences of recurrent instability (narrower vs wider; 6.9% vs 3.7%), complications (17.2% vs 7.4%), reoperation (3.5% vs 7.4%), and RTS (66.7% vs 68.4%) and similar postoperative ASES scores (87.1 vs 80.0) (P ≥.05 for all). Conclusion: Patients undergoing Latarjet coracoid transfer had similar postoperative outcomes regardless of preoperative coracoid dimensions. These findings should be confirmed in a larger cohort before further clinical recommendations are made. [ABSTRACT FROM AUTHOR]

This study on the forelimb skeletal gross anatomy was conducted on the helmeted guinea fowl to document its distinctive morphological features. Eight (8) Helmeted guinea fowls (4 females and 4 males) with an average weight of 3.0kg were sacrificed via jugular vein severance with bone preparation achieved by use of insect larvae. The horizontally oriented scapula was an elongated flattened dorsoventrally curved bone having two extremities and a shaft but lacked the muscular tubercle on the cranial third of the ventral border present in other avian species. The obliquely oriented coracoid presented a thick bone with a hook-like acrocoracoid process that formed a shallow supracoracoid groove at its proximal extremity. It however, lacked the rough surface for muscular attachment and the pneumatic foramen on the dorsal surface. The proximal fossa was absent on the dorsal surface of the humerus while the ulna and radius were joined at their extremities creating an extensive interosseous space. The radius was the thinner of the two bones lying dorsal to the larger ulna in the folded wing. Two carpal bones were present on the wings while the carpometacarpal consisted of the 2nd (stub-like projection), 3rd (large straight long) and 4th (curved) metacarpals with the 3rd and 4th fusing at their extremities giving rise to an extensive D-shaped interosseous space. The digits were three in number (digits II, III and IV) that articulated proximally with carpometacarpals II, III and IV respectively. Digit III had two phalanges while digits II and IV had one. In conclusion, bones of the forelimb of the guinea fowl (Numida meleagridis) lacked some common features visible in its closest relative, the domestic fowl (Gallus domesticus). [ABSTRACT FROM AUTHOR]

Background: Glenohumeral instability caused by bone loss requires adequate bony restoration for successful surgical stabilization. Coracoid transfer has been the gold standard bone graft; however, it has high complication rates. Alternative autologous free bone grafts, which include the distal clavicle and scapular spine, have been suggested. Study Design: Controlled laboratory study. Purpose: The purpose of this study was to determine the percentage of glenoid bone loss (GBL) restored via coracoid, distal clavicle, and scapular spine bone grafts using a patient cohort and a cadaveric evaluation. Methods: Autologous bone graft dimensions from a traditional Latarjet, congruent arc Latarjet, distal clavicle, and scapular spine were measured in a 2-part study using 52 computed tomography (CT) scans and 10 unmatched cadaveric specimens. The amount of GBL restored using each graft was calculated by comparing the graft thickness with the glenoid diameter. Results: Using CT measurements, we found the mean percentage of glenoid restoration for each graft was 49.5% ± 6.7% (traditional Latarjet), 45.1% ± 4.9% (congruent arc Latarjet), 42.2% ± 7.7% (distal clavicle), and 26.2% ± 8.1% (scapular spine). Using cadaveric measurements, we found the mean percentage of glenoid restoration for each graft was 40.2% ± 5.0% (traditional Latarjet), 53.4% ± 4.7% (congruent arc Latarjet), 45.6% ± 8.4% (distal clavicle), and 28.2% ± 7.7% (scapular spine). With 10% GBL, 100% of the coracoid and distal clavicle grafts, as well as 88% of scapular spine grafts, could restore the defect (P <.001). With 20% GBL, 100% of the coracoid and distal clavicle grafts but only 66% of scapular spine grafts could restore the defect (P <.001). With 30% GBL, 100% of coracoid grafts, 98% of distal clavicle grafts, and 28% of scapular spine grafts could restore the defect (P <.001). With 40% GBL, a significant difference was identified (P =.001), as most coracoid grafts still provided adequate restoration (congruent arc Latarjet, 82.7%; traditional Latarjet, 76.9%), but distal clavicle grafts were markedly reduced, with only 51.9% of grafts maintaining sufficient dimensions. Conclusions: The coracoid and distal clavicle grafts reliably restored up to 30% GBL in nearly all patients. The coracoid was the only graft that could reliably restore up to 40% GBL. Clinical Relevance: With "subcritical" GBL (>13.5%), all autologous bone grafts can be used to adequately restore the bony defect. However, with "critical" GBL (≥20%), only the coracoid and distal clavicle can reliably restore the bony defect. [ABSTRACT FROM AUTHOR]

Nineteen patients presented with an unsightly deformity of the shoulder, pain or discomfort at the medial scapular border, pseudo nonparalytic scapular winging, and thoracic outlet symptoms after excessive resection of the clavicle for either complete acromioclavicular separation or displaced fracture of the outer clavicle, which allows the scapula and shoulder to rotate anteriorly and inferiorly on the chest creating traction on the medial scapular muscles and the brachial plexus resulting in pseudo nonparalytic winging and thoracic outlet symptoms. All underwent transfer of the coracoid process with the attached conjoined tendon to the end of the clavicle, restoring length and alignment. Eighteen patients were evaluated at a mean of 13.3 years. Seventeen had resolution of symptoms, restored alignment of the clavicle with the shoulder, improved appearance, healed transfer, and were pleased with the outcome. One patient was lost to follow-up but was considered a failure at his last visit. In a second patient, the transfer healed in a tilted position and the patient was dissatisfied with the appearance but otherwise had resolution of his symptoms. The mean American Shoulder and Elbow Surgeons Outcome Score improved from 53.2 preoperatively to 87.4 postoperatively (P <.02). This is the first report of using this transfer to restore length and alignment of an excessively short, unstable clavicle. The transfer succeeded in improving the appearance and symptoms in this complication of an excessively short, unstable clavicle. [ABSTRACT FROM AUTHOR]

Background: The Latarjet and bone block procedures can be secured with screws or cortical buttons. The purpose of this biomechanical study was to compare quadruple buttons vs. double screws for fixation of anterior glenoid bone grafts. Methods: Twelve cadaveric scapulae (6 pairs) were denuded, resected, and potted. Pairs were randomized to quadruple-button or double-screw fixation after creation of a 15% anterior glenoid defect. The specimens underwent cyclic uniaxial compressive glenoid loading between 50 and 200 N for 1000 cycles at 1 Hz. Testing was repeated for conjoint tendon loads of 0 N (simulating a bone block procedure), 10 N, and 20 N (simulating a Latarjet procedure). Peak resultant relative coracoid graft displacement was optically tracked at 3 points (superior, central, and inferior) on the edge of the coracoid. Results: No significant differences were found between buttons and screws for bone block applications or with 10 N of conjoint tendon loading (P ≥ .095). At 20 N of conjoint tendon loading, however, the screws were significantly more stable than the buttons (P ≤ .023). During the initial 20-N conjoint load application, all 3 points displaced significantly more with the button reconstruction than with the screws (P ≤ .01). Overall, mean displacements did not exceed 1 mm at any position on the coracoid, regardless of testing condition. Conclusions: The quadruple-button technique is comparable to screws when the coracoid is used as a bone block or when conjoint tendon loading is minimized. However, at higher conjoint tendon loads, the screws produced a more stable coracoid graft than the buttons.

This project is designed to examine the prevalence of skeletal pathology in two archaeological avian bone assemblages. Archaeological avian bone assemblages with Number of Identified Specimens of 14,909 (UNL-055) and 36,866 (UNL-048). Visual examination of humeri, coracoids, tarsometatarsi, and cranial elements for pathology during taxonomic identification. 83 instances of skeletal pathology were observed in these assemblages and were most prevalent in the UNL-048 assemblage. Marginal osteophytes around the articular surfaces of the coracoid were the primary bone pathology in the UNL-048 avian assemblage. The prevalence of osteoarthritis in surface diving birds at the UNL-048 site could be due to changing climate. Considering the environmental factors that contribute to instances of animal pathology allows for a more contextual interpretation of the cultural processes that occurred at archaeological sites. Time and budgetary constraints did not allow for examination of the entire avian assemblage. Further intensive review of archaeological avian assemblages alongside consideration of environmental and cultural processes occurring during the site occupation is advised. [ABSTRACT FROM AUTHOR]

Introduction: Post traumatic shoulder dislocation has very high recurrence rates. Most surgical procedures described lead to decreased range of motion and have high complication rates. Modified Boytchev technique is one of the popular techniques for recurrent shoulder dislocation. Aim: To see functional results of Modified Boytchev procedure along with anterior capsular plication. Materials and Methods: This was an open prospective study in which patients presenting with recurrent anterior dislocation of shoulder were enrolled from January 2014 to December 2017. It was conducted in the Department of Orthopaedics in a tertiary care teaching hospital. In the series, 41 patients underwent Modified Boytchev procedure with capsular plication. Followup was done using Oxford Instability Shoulder Score (OISS) and objective range of motion measurements. All data was tabulated and statistically analysed with paired t-test using recent version of SPSS. Results: Five patients in the study were lost to follow-up and hence excluded from the study. Mean age in the series was 30.8 years. A total 33 (91.6%) of patients were male and 3 (8.3%) were females. Out of 36 patients, 32 (88.9%) had dominant shoulder involvement. Average number of dislocations at presentation was 5. Mean follow-up period was 38 months (24 to 62 months). Mean OISS score before surgery was 21.2±6.86 which improved to 41.08±4.01 at six months (p

Objective: To evaluate the early-term effectiveness of Latarjet procedure with double EndoButtons fixation for recurrent anterior shoulder dislocation by coracoid osteotomy with preserving coracoacromial ligament., Methods: Between January 2021 and June 2023, 19 patients with recurrent anterior shoulder dislocations were treated by arthroscopic Latarjet procedure with double EndoButtons fixation, all of which underwent coracoid osteotomy with preserving the coracoacromial ligament. There were 11 males and 8 females, with an average age of 23.3 years (range, 17-32 years). Shoulder dislocations ranged from 3 to 11 times, with an average of 6.4 times. The disease duration ranged from 3 to 35 months, with an average of 12.9 months. All apprehension tests were positive. Imaging examination showed that the defect width of the ipsilateral glenoid bone was 13%-26%, with an average of 19.8%. After operation, the shoulder range of motion was examined, including flexion lift, lateral external rotation, extension 90° external rotation, and internal rotation. Shoulder joint function was evaluated by Walch-Duplay score, American Association for Shoulder and Elbow Surgery (ASES) score, and Rowe score. Imaging examinations were taken to observe the position and shaping of coracoid., Results: All incisions healed by first intention and no nerve or vessel injury occurred. All patients were followed up 9-24 months (mean, 14.5 months). There was no recurrence of shoulder dislocation and the apprehension tests were negative during follow-up. There was no significant difference in the shoulder range of motion (flexion lift, lateral external rotation, extension 90° external rotation, and internal rotation) between preoperation and at last follow-up ( P >0.05). The Walch-Duplay score, ASES score, and Rowe score significantly improved when compared with those before operation ( P <0.05). Postoperative imaging showed that coracoid graft was at the same level with the glenoid in all cases; the center of coracoid graft was located between 3 to 5 o'clock. During follow-up, there was no glenohumeral joint degeneration, the acromiaohumeral distance was not reduced when compared with preoperation, and the coracoid bone gradually formed concentric circles with the humeral head., Conclusion: The Latarjet procedure with double EndoButtons fixation can effectively treat recurrent anterior shoulder dislocation by coracoid osteotomy with preserving coracoacromial ligament, and the early-term effectiveness is satisfactory.

The Latarjet procedure is a frequently used stabilization procedure in case of anterior shoulder instability with critical glenoid bone loss and/or off-track Hill Sachs lesions. Although uncommon, intra-operative graft fractures do occur. When confronted with this potentially challenging intra-operative complication, having a secondary solution is paramount to achieve a successful outcome. This technical note provides a treatment algorithm that may function as a useful guideline to assist surgeons that experience this potentially complex unintended event during a Latarjet procedure. LEVEL OF EVIDENCE: Level IV, therapeutic case series., (Copyright © 2024. Published by Elsevier Masson SAS.)

Background: Coracoclavicular (CC) ligament reconstruction is a commonly performed procedure for high-grade acromioclavicular (AC) joint separations. Although distal clavicle and coracoid process fractures represent potential complications, they have been described in only case reports and small case series. Purpose: To identify the incidence and characteristics of clavicle and coracoid fractures after CC ligament reconstruction. Study Design: Case series; Level of evidence, 4. Methods: The US Military Health System Data Repository was queried for patients with a Current Procedural Terminology code for CC ligament repair or reconstruction between October 2013 and March 2020. The electronic health records, including patient characteristics, radiographs, operative reports, and clinical notes, were evaluated for intraoperative or postoperative clavicle or coracoid fractures. Initial operative technique, fracture management, and subsequent clinical outcomes were reviewed for these patients. Results: A total of 896 primary CC ligament repairs or reconstructions were performed during the study period. There were 21 postoperative fractures and 1 intraoperative fracture in 20 patients. Of these fractures, 12 involved the coracoid and 10 involved the clavicle. The overall incidence of fracture was 3.81 fractures per 1000 person-years. In 5 patients who sustained a fracture, bone tunnels were not drilled in the fractured bone during the index procedure. A total of 17 fractures were ultimately treated operatively, whereas 5 fractures had nonoperative management. Of the 16 active-duty servicemembers who sustained intraoperative or postoperative fractures, 11 were unable to return to full military duty after their fracture care. Conclusion: Fracture of the distal clavicle or coracoid process after CC ligament repair or reconstruction is a rare but serious complication that can occur independent of bone tunnels created during the index procedure. Fractures associated with CC ligament procedures occurred at a rate of 2.46 per 100 cases. Most patients were ultimately treated surgically with open reduction and internal fixation or revision CC ligament reconstruction. Although the majority of patients with intraoperative or postoperative fractures regained full range of motion, complications such as anterior shoulder pain, AC joint asymmetry, and activity-related weakness were common sequelae resulting in physical limitations and separation from military service. [ABSTRACT FROM AUTHOR]

The success of the modified Latarjet procedure depends on proper sizing of the coracoid graft. There is no information available regarding the morphometric relationship between the glenoid cavity and the coracoid process for the South African population. This study aims at measuring the relationship between the glenoid and coracoid morphometries and investigates their gender-related differences. Glenohumeral computerized tomography scans of 100 consecutive patients were considered for this study. Morphometric measurements were performed after aligning the coracoid and glenoid in their optimum orientation. These measurements were performed by 2 independent observers. The ratio between glenoid and coracoid measurements was calculated and statistically compared using the Mann-Whitney U test. Intraclass correlation coefficients were calculated to analyze interobserver reliability. All the statistical tests were performed in SPSS v.26, and power calculations in G∗Power v.3.1. An average intraclass correlation coefficient value of 0.79 suggested that the interobserver reliability was good. Except for coracoid length, statistically significant (P <.05) gender differences were observed for all the other morphometries. The coracoid width (16.5 ± 1.4 mm vs. 14.7 ± 1.4 mm) and height (13.6 ± 1.6 mm vs. 10.5 ± 1.5 mm) differed between genders by 1.8 and 3.1 mm, respectively. The glenoid anteroposterior (AP) (25.3 ± 2.9 mm vs. 23.2 ± 2.4 mm) and superioinferior (36.9 ± 1.9 mm vs. 33.7 ± 2.6 mm) measurements differed by 2.1 and 3.3 mm, respectively, between the males and the females. The ratio between the AP width of the glenoid and the coracoid height was also found to be significantly different (P <.05) between the gender groups. These morphometric ratios for the coracoid width (0.66 ± 0.09 mm vs. 0.64 ± 0.08 mm) and the coracoid height (0.55 ± 0.09 mm vs. 0.46 ± 0.07 mm) differed between genders by 0.02 and 0.09, respectively. Measurements taken from computerized tomography scans showed significant differences between genders in absolute measurements and in the ratio of the coracoid height to the glenoid AP distance. This could have implications on the ability of the Latarjet procedure to compensate for bone loss in female patients. [ABSTRACT FROM AUTHOR]

A survey is given of the morphological variation of the coracoscapular joint of neornithine birds. In Mesozoic stem group representatives, the coracoid exhibits a deeply concave cotyla scapularis, which articulates with a globose tuberculum coracoideum of the scapula. This morphology is likely to be functionally related to the development of a powerful supracoracoideus muscle and the formation of a triosseal canal as a pulley for the tendon of this muscle. In neornithine birds, the coracoid articulates with the scapula either via a concave cotyla or a flat facies articularis, with the latter largely restricting movements of the coracoid to the paramedian plane. Ancestral state reconstruction suggests that a cotyla scapularis is plesiomorphic for Neornithes and that a flat facies articularis scapularis evolved at least 13 times independently within the clade. For several lineages, the transition to a flat facies articularis scapularis can be traced in the fossil record, and the replacement of a cup-shaped cotyla by a flat articular facet seems to have been due to various functional demands. Often, a flat facies articularis scapularis is associated with reduced shafts of the furcula. A weakly developed furcula enables transverse movements of the coracoid and therefore enables a restriction of the mobility of the coracoscapular joint to the paramedian plane. In taxa with a large crop, a flat facies articularis scapularis is likely to be associated with a reorganization of the pectoral musculature, whereas in procellariiform birds, the transition from a cotyla to a facies articularis appears to have been correlated with the capacity for sustained soaring without wing flapping. [ABSTRACT FROM AUTHOR]

A study was conducted on the pectoral girdle of small Indian kite also known as Pariah kite and domestic fowl to compare the gross features of the bones and to correlate their morphological peculiarities with its possible functions. The skeleton of the pectoral girdle consisted of clavicle, coracoid and scapula in both the species but presented striking deviations. In domestic fowl, the scapula presented a flat coracoid process, coracoid had a hook like furcular tuberosity and furcula was V shaped with a prominent hypocledium. In kite the scapula had a truncated caudal extremity with a convex coracoid process whereas, the coracoid had hook like proximal extremity, a small foramen and scapular process. Pariah kite had flat clavicles, which formed 'U' shaped furculum with rudimentary hypocleidium. All the bones were comparatively stronger in kite which could be an adaptation towards the functions necessary to perform the flight stroke. [ABSTRACT FROM AUTHOR]

Abstract Background The purpose of this study was to investigate the relationship between the bone length available for coracoid transfer without coracoclavicular ligament injury and the distance from the coracoid tip to the attachments of the coracoacromial ligament or pectoralis minor. We hypothesized that cadaver height and the soft tissue attachments on the coracoid process were predictive factors for sufficient bone length for coracoid transfer. Methods This study included 28 shoulders from Japanese cadavers: 19 male and 9 female. The distance from the coracoid tip to the distal attachment of the coracoclavicular ligament and the anterior and posterior margins of the coracoacromial ligament or pectoralis minor on the coracoid process were measured. Results The mean available length for coracoid transfer was 24.8 ± 3.4 mm. There was a significant difference in length between male and female subjects, being 26.0 ± 2.9 mm and 22.2 ± 3.0 mm, respectively (p = 0.004). High positive correlations were found between the length of the coracoid transfer and cadaver’s height (r = 0.48, p = 0.009) and the distance from the coracoid tip to the anterior coracoacromial ligament attachment (r = 0.63, p < 0.001). The receiver operating characteristic curve area under the curve for cadaver height was 0.72 while that for distance from coracoid tip to anterior coracoacromial ligament was 0.88 when predicted for a sufficient length for coracoid transfer > 25 mm. Conclusions Our findings will aid surgeons in preoperative planning and performing of osteotomy of the coracoid safely by predicting the available length of coracoid bone graft.

Aim: Moment arm of anterior part of deltoid muscle is increased as working principle of reverse shoulder arthroplasty and anterior part of deltoid muscle insertion could be damaged during proximal humerus surgery. The purpose of the present study was to report distances from various bony landmarks to anterior, superior, medial insertion points of deltoid before and after implantation 5mm thick glenoid implant. Patients and Methods: 12 shoulders of formalin fixed adult cadavers were used at the present study. The distances from greater tubercle to deltoid insertion, anterior-lateral corner of acromion to deltoid insertion, coracoid tip to deltoid insertion, upper pole of glenoid to deltoid insertion, and humeral length (greater tubercle to lateral epicondyle) were measured using digital caliper and measurement tape before and after implantation of 5mm thick pegged glenoid trial (Bigliani/Flatow Total shoulder arthroplasty, Zimmer, Warsaw, IN). Results: At tape measurement, glenoid to deltoid insertion distance was higher at post implant group at right shoulders (p:0.04). When all shoulders were compared, coracoid to deltoid insertion distance was higher at implanted group (p:0.04). Conclusion: Deltoid insertion lateralization could be detected from the bony landmarks around the glenoid especially the coracoid tip.

Background: High-grade acromioclavicular (AC) joint separation injuries (Rockwood type IV or V) are surgically indicated because of complete disruption of the AC and coracoclavicular (CC) ligaments, leading to instability and pain. In surgical techniques that require a suspensory system, coracoid tunnel-related complications are not uncommon. Purpose: To report subjective and objective clinical outcomes and complication rates of a modified coracoid tunnel-free CC sling technique combined with CC ligament remnant preservation for a minimum 2-year follow-up. Study Design: Case series; Level of evidence, 4. Methods: Between January 2014 and January 2017, we prospectively enrolled patients who underwent a modified CC sling technique performed by 1 senior surgeon using the AC TightRope System in a coracoid tunnel-free fashion. The CC distance (CCD) and Rockwood AC joint classification were evaluated on radiographs preoperatively, immediately postoperatively, and at the final follow-up. The visual analog pain score, range of motion, American Shoulder and Elbow Surgeons score, Constant-Murley score, and University of California Los Angeles score were recorded preoperatively and at the final follow-up. Results: In total, 48 of 54 patients (88.9%) were included for the evaluation with a mean ± SD follow-up of 39.3 ± 8.9 months (range, 24.7-64.3 months). The CCD was significantly decreased from 22.7 ± 4.2 to 9.8 ± 2.3 mm (P <.01) immediately after surgery and to 11.2 ± 1.8 mm (P <.01) at final follow-up. At the final follow-up, the side-to-side difference of CCD was 3.5 ± 0.6 mm. Compared with the preoperative level, all subjective evaluations were significantly improved at the final follow-up. We observed that 4 of the 48 patients (8.3%) had a loss of reduction at the final follow-up, but no pain or instability was documented. Further, no coracoid-related complication or other complications were recorded. Conclusion: The coracoid tunnel-free CC sling technique using the AC TightRope System combined with CC ligament remnant preservation demonstrated significant improvement regarding both clinical and radiological outcomes, with a reduction loss rate of 8.3%. It is a safe method that could achieve satisfactory result without any coracoid drilling-related complications. [ABSTRACT FROM AUTHOR]

Background: The Latarjet procedure was developed for the treatment of anterior shoulder instability in young, high-demand patients with attritional glenoid bone loss, whose risk of redislocation following primary dislocation may exceed 90%. Coracoid graft osteolysis and prominent screws are commonly observed in late computed tomography (CT) scans of patients who re-present following the procedure, but the clinical relevance of osteolysis in the overall Latarjet cohort is undetermined. We aimed to evaluate clinical and radiological outcomes in patients who underwent the Latarjet procedure, and to determine if severe coracoid graft osteolysis compromised clinical outcomes., Methods: This was a retrospective analysis of patients who underwent the open Latarjet procedure. Patients were invited via an e-questionnaire that contained a Western Ontario Shoulder Instability Index (WOSI), and queried about redislocation and reoperation since index surgery. Preoperative glenoid bone loss was calculated on CT using the best-fit circle method. Osteolysis was graded (0, screw head buried in graft; 1, screw head exposed; 2, threads exposed; 3, complete resorption/severe osteolysis) at the level of the proximal and distal screws respectively, on axial CT scans performed ≥ 12 months postoperatively., Results: Between 2011 and 2022, a single surgeon performed 442 Latarjet procedures. One hundred fifty eight patients responded to the questionnaire at median (interquartile range [IQR]) 44 (27-70) months postoperatively, among whom the median (IQR) WOSI score was 352 (142-666) points (0 = best, 2100 = worst). Recurrent anterior instability occurred in 3/158 (2%) patients. One patient required reoperation for this indication. Among patients who had CT scans ≥ 12 months postoperatively (median [IQR] 40 [29-69] months), 1 patient developed severe osteolysis around both screws (WOSI = 90), 17/62 (27%) patients developed severe osteolysis around 1 screw, all of which were proximal (median [IQR] WOSI = 235 [135-644]), and 44/62 (71%) patients did not develop severe osteolysis around either screw (median [IQR] WOSI = 487 [177-815]). There were no statistically significant differences in WOSI scores between groups based on the presence of severe osteolysis., Conclusion: The Latarjet is reliable procedure that has a low rate of redislocation and reoperation. Severe coracoid graft osteolysis occurs with time, and always affects the proximal graft first. The presence of severe osteolysis did not compromise clinical outcomes., (Crown Copyright © 2024 Published by Elsevier Inc. on behalf of American Shoulder and Elbow Surgeons.)

Introduction: The aim of this study was to anatomically compare distal clavicle and coracoid autografts and their potential to augment anterior-inferior glenoid bone loss. Methods: Ten millimeters of distal clavicle and 20 mm of coracoid were harvested bilaterally from 32 cadavers. Length, weight, and height were measured and surface area and density were calculated. For each graft, ipsilateral measurements were compared and the ability to restore corresponding glenoid bone loss was calculated. Results: Distal clavicle grafts were larger than coracoid grafts with respect to length (22.3 mm versus 17.7 mm; p < 0.001), height (12.49 mm versus 9.65 mm; p < 0.001), mass (2.72 g versus 2.45 g; p = 0.0437), and volume (2.36 cm3 versus 1.96 cm3; p = 0.002). Coracoid grafts had larger widths (14.56 mm versus 10.52 mm; p < 0.001) and greater density (1.24 g/cm3 versus 1.18 g/cm3; p < 0.001). Distal clavicle surface area was greater on both the articular (2.93 cm2 versus 1.5 cm2; p < 0.001) and superior surfaces (2.76 cm2 versus 1.5 cm2; p < 0.001) when compared to lateral coracoid surface area. Discussion: Distal clavicle grafts were larger and restored larger bony defects but had greater variability and lower density than coracoid grafts. Clinical studies are needed to compare these graft options. [ABSTRACT FROM AUTHOR]

Anterior shoulder pain is common, and, compared to high-resolution dynamic sonography, the clinical examination is usually not precise enough for the exact classification of the cause of the pain. In this review we discuss possible causes of anterior shoulder pain with special emphasis on the ultrasound diagnosis of causes of subcoracoidal impingement and of anterior snapping syndrome. We use high-resolution ultrasound images to illustrate various possible underlying pathologies in anterior shoulder pain. [ABSTRACT FROM AUTHOR]

Background: Coracoid process is a bird's beak like projection which arises superolaterally from the upper border of the head. It plays an important role in shoulder function. The aim of our study is to measure the dimensions of the coracoid process of the scapula. Method: The study was performed on 104 specimens of human scapula of unknown sex obtained from the Department of Anatomy of Institute of Medical Sciences & SUM hospital. The dimensions recorded were breath, length, height, thickness and types of coraco-glenoid space by using digital vernier calipers. These parameters were compared on both the sides. Results: The most predominant coraco-glenoid space was found to be the round bracket (Type I). Statistically insignificant difference was noted in all four parameters between right and left. Though all the four parameters have higher values on right side in comparison to left side but the difference was statistically insignificant. The results are as such length of coracoid- 39.91±3.16 mm; width of coracoid- 14.00±2.03 mm; tip thickness of coracoid- 8.32±1.87 mm; height of base coracoid- 22.87±3.55 mm; width of base of coracoid- 10.50 ±2.64 mm; Conclusions: The study of variation of dimensions of coracoid process provides valuable information regarding the role of these parameters in etiology of subcoracoid impingement syndrome which will help the radiologist and orthopedic surgeons for diagnosing various pathologies and plan for surgical procedure on coracoid process. [ABSTRACT FROM AUTHOR]

Purpose: Glenoid bony lesions play a role in approximately half of anterior shoulder instability cases. The purpose of this study is to see if the anatomy of the coracoid affects the location of glenoid rim defects. We hypothesized that a prominent coracoid (lower and lateral) would be more likely to cause an anterior–inferior glenoid lesion, and a less prominent coracoid more prone to cause an anterior lesion. The null hypothesis being the absence of correlation. Methods: Fifty-one shoulder CT-scans from a prospective database, with 3D reconstruction, were analyzed. The position of glenoid lesions was identified using the validated clock method, identifying the beginning and end time. The size of bony glenoid defects was calculated using the validated glenoid ratio method. The position of the coracoid tip was measured in three orthogonal planes. Results: Analysis included 25 right shoulders and 26 left shoulders in seven females and 41 males. The vertical position of the coracoid tip relative to the top of the glenoid was highly correlated to the location of the glenoid defect on the profile view (r = −0.625; 95% CI 0.423–0.768; p = 0.001). Thus, higher coracoids were associated with anterior lesions, while lower coracoids were associated with anterior–inferior lesions. A more laterally prominent coracoid was also correlated with anterior–inferior lesions (r = 0.433; 95% CI 0.179–0.633; p = 0.002). Conclusion: This study shows that coracoid anatomy affects the location of bony Bankart defects in anterior shoulder instability. Lower and laterally prominent coracoids are associated with anterior–inferior lesions. This variation in anatomy should be considered during pre-op planning for surgeries involving bone graft. Level of evidence: Level 4 basic science. [ABSTRACT FROM AUTHOR]

The observation of the roller-wringer effect fueled the idea that coracoid morphology is related to subscapularis pathology. We aimed to examine this relationship, specifically focusing on how the coracohumeral distance (CHD) and 2 new metrics of coracoid morphology relate to subscapularis tears. In this retrospective study, we identified consecutive patients 45 years or older who underwent shoulder arthroscopy for any indication. We blindly reviewed preoperative magnetic resonance imaging studies of each patient, measuring the CHD, lateral extent (LE), and caudal extent (CE) of the coracoid process. Patients' subscapularis condition was assessed via operative reports; stratified according to Lafosse grade criteria; and compared for differences in the CHD, LE, and CE by 1-way analysis of variance and 2-tailed t tests. The study included 201 patients. Of these, 112 had no evidence of subscapularis injury, whereas Lafosse grade I injuries were identified in 52 patients; grade II, in 19; and grades III-V, in 18. The CHD, LE, and CE were not correlated with subscapularis injury (CHD, P =.36; LE, P =.36; and CE, P =.13). We found no correlation between subscapularis injury and the CHD, LE, and CE. These findings support the idea that coracoid morphology may not be a cause of subscapularis pathology and suggest that coracoplasty may not be necessary prophylactically or as part of subscapularis repair. [ABSTRACT FROM AUTHOR]

Purpose: The purpose of this study was to provide arthroscopic measurements and orientations of the axillary and musculocutaneous nerves medial to the coracoid.Methods: A retrospective chart review of 29 patients undergoing arthroscopic subscapularis repair and arthroscopic cadaveric dissection of 23 shoulders was used to analyze neuroanatomical distances to arthroscopic landmarks and to document the orientations of the axillary and musculocutaneous nerves using a clock face analogy. The clock face data was analyzed by separating the clock face into four quadrants and the frequency of any crossing nerve within each of the four quadrants was then determined.Results: In vivo, the axillary nerve was found 1.5 ± 0.5 cm medial to the coracoid tip and the musculocutaneous nerve was found 1.6 ± 0.6 cm medial to the coracoid tip. In cadavera, the axillary nerve was found 2.0 ± 0.6 cm medial to the coracoid tip and the musculocutaneous nerve was found 1.5 ± 0.5 cm medial to the coracoid tip. The posterosuperior quadrant of the subcoracoid space contained a crossing nerve in 4 of 29 (13.8%) patients undergoing arthroscopic rotator cuff repair medial to the coracoid, compared to 9 of 23 (39.1%) cadavera undergoing arthroscopic dissection medial to the coracoid. The posteroinferior quadrant contained a crossing nerve in 16 of 29 (55.2%) patients compared to 17 of 23 (73.9%) cadavera.Conclusions: The axillary and musculocutaneous nerves run in close proximity to the coracoid tip and coracoid arch, most consistently within 1-2 cm medial to these structures, which is closer than has been previously documented in the literature. Crossing nerves are least frequently encountered within the posterosuperior quadrant of the subcoracoid space medial to the coracoid, followed by the posteroinferior quadrant. Arthroscopic dissection of this space should begin in the posterosuperior quadrant and carefully progress to the posteroinferior quadrant to decrease the risk of intraoperative nerve injury. Given the close proximity and frequently encountered nerves in this area, extreme caution must be exercised when working arthroscopically within the subcoracoid space. [ABSTRACT FROM AUTHOR]

Important transformations of the pectoral girdle are related to the appearance of flight capabilities in the Dinosauria. Previous studies on this topic focused mainly on paravians yet recent data suggests flight evolved in dinosaurs several times, including at least once among non-avialan paravians. Thus, to fully explore the evolution of flight-related avian shoulder girdle characteristics, it is necessary to compare morphology more broadly. Here, we present information from pennaraptoran specimens preserving pectoral girdle elements, including all purportedly volant taxa, and extensively compare aspects of the shoulder joint. The results show that many pectoral girdle modifications appear during the evolution from basal pennaraptorans to paravians, including changes in the orientation of the coracoid body and the location of the articulation between the furcula and scapula. These modifications suggest a change in forelimb range of motion preceded the origin of flight in paravians. During the evolution of early avialans, additional flight adaptive transformations occur, such as the separation of the scapula and coracoid and reduction of the articular surface between these two bones, reduction in the angle between these two elements, and elongation of the coracoid. The diversity of coracoid morphologies and types of articulations joining the scapula-coracoid suggest that each early avialan lineage evolved these features in parallel as they independently evolved more refined flight capabilities. In early ornithothoracines, the orientation of the glenoid fossa and location of the acrocoracoid approaches the condition in extant birds, suggesting a greater range of motion in the flight stroke, which may represent the acquisition of improved powered flight capabilities, such as ground take-off. The formation of a new articulation between the coracoid and furcula in the Ornithuromorpha is the last step in the formation of an osseous triosseal canal, which may indicate the complete acquisition of the modern flight apparatus. These morphological transitions equipped birds with a greater range of motion, increased and more efficient muscular output and while at the same time transmitting the increased pressure being generated by ever more powerful flapping movements in such a way as to protect the organs. The driving factors and functional adaptations of many of these transitional morphologies are as yet unclear although ontogenetic transitions in forelimb function observed in extant birds provide an excellent framework through which we can explore the behavior of Mesozoic pennaraptorans., Competing Interests: The authors declare there are no competing interests., (©2024 Wu et al.)

Purpose: Coracoid fractures represent approximately 3–13% of all scapular fractures. Open reduction and internal fixation can be indicated for a coracoid base fracture. This procedure is challenging due to the nature of visualization of the coracoid with fluoroscopy. The aim of this study was to develop a fluoroscopic imaging protocol, which helps surgeons in finding the optimal insertion point and screw orientation for fixations of coracoid base fractures, and to assess its feasibility in a simulation study. Methods: A novel imaging protocol was defined for screw fixation of coracoid base fractures under fluoroscopic guidance. The method is based on finding the optimal view for screw insertion perpendicular to the viewing plane. In a fluoroscopy simulation environment, eight orthopaedic surgeons were invited to place a screw down the coracoid stalk through the coracoid base and into the neck of 14 cadaveric scapulae using anatomical landmarks. The surgeons placed screws before and after they received an e-learning of the optimal view. Results of the two sessions were compared and inter-rater reliability was calculated. Results: Screw placement was correct in 33 out of 56 (58.9%) before, and increased to 50 out of 56 (89.3%) after the coracoid tunnel view was explained to the surgeons, which was a significant improvement (p < 0.001). Conclusions: Our newly developed fluoroscopic view based on simple landmarks is a useful addendum in the orthopaedic surgeon's tool box to fixate fractures of the coracoid base. [ABSTRACT FROM AUTHOR]

Copyright of Der Unfallchirurg is the property of Springer Nature and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Introduction: Neglected locked posterior shoulder dislocations, although rare, are quiet perplexing to manage. Various treatment methods have been explained for their management, but a consensus is still lacking. Besides describing a novel technique for the management of these lesions, this study aims to evaluate the mid-term outcome of this technique. Method: This prospective study involved seven consecutive patients with locked posterior dislocation of the shoulder with humeral defect between 25% and 50%. All patients underwent open reduction of the locked posterior dislocation with the current technique. The final outcome was assessed at a mean follow up of 3.5 years (range 2-5 years) using the DASH score. Result: The mean age of the patients was 32 years (range 21- 44) and all were men. The mean time to presentation from initial injury was 2.4 years (range 2-4 years). The patient related outcome as measured by DASH score improved from a preoperative mean of 59.1 to mean value of 8.6 at the time of final follow up. There were no cases of graft pull out, nonunion at the graft site or infection. Conclusion: This technique results in pain-free range of motion with a stable shoulder though a larger sample population with a longer follow up is required to further support our observations.