Search

Aspera is a NASA Astrophysics Pioneers SmallSat mission designed to study diffuse OVI emission from the warm-hot phase gas in the halos of nearby galaxies. Its payload consists of two identical Rowland Circle-type long-slit spectrographs, sharing a single MicroChannel plate detector. Each spectrograph channel consists of an off-axis parabola primary mirror and a toroidal diffraction grating optimized for the 1013-1057 Angstroms bandpass. Despite the simple configuration, the optical alignment/integration process for Aspera is challenging due to tight optical alignment tolerances, driven by the compact form factor, and the contamination sensitivity of the Far-Ultraviolet optics and detectors. In this paper, we discuss implementing a novel multi-phase approach to meet these requirements using state-of-the-art optical metrology tools. For coarsely positioning the optics we use a blue-laser 3D scanner while the fine alignment is done with a Zygo interferometer and a custom computer-generated hologram. The detector focus requires iterative in-vacuum alignment using a Vacuum UV collimator. The alignment is done in a controlled cleanroom facility at the University of Arizona., Comment: Manuscript submitted for Proceedings of Astronomical Telescopes + Instrumentation 2024, Paper no. 13093-9

GMagAO-X is a visible to NIR extreme adaptive optics (ExAO) system that will be used at first light for the Giant Magellan Telescope (GMT). GMagAO-X is designed to deliver diffraction-limited performance at visible and NIR wavelengths (6 to 10 mas) and contrasts on the order of $10^{-7}$. The primary science case of GMagAO-X will be the characterization of mature, and potentially habitable, exoplanets in reflected light. GMagAO-X employs a woofer-tweeter system and includes segment phasing control. The tweeter is a 21,000 actuator segmented deformable mirror (DM), composed of seven individual 3,000 actuator DMs. This new ExAO framework of seven DMs working in parallel to produce a 21,000 actuator DM significantly surpasses any current or near future actuator count for a monolithic DM architecture. Bootstrapping, phasing, and high order sensing are enabled by a multi-stage wavefront sensing system. GMT's unprecedented 25.4 m aperture composed of seven segments brings a new challenge of co-phasing massive mirrors to 1/100th of a wavelength. The primary mirror segments of the GMT are separated by large >30 cm gaps so there will be fluctuations in optical path length (piston) across the pupil due to vibration of the segments, atmospheric conditions, etc. We have developed the High Contrast Adaptive-optics Testbed (HCAT) to test new wavefront sensing and control approaches for GMT and GMagAO-X, such as the holographic dispersed fringe sensor (HDFS), and the new ExAO parallel DM concept for correcting aberrations across a segmented pupil. The CoDR for GMagAO-X was held in September 2021 and a preliminary design review is planned for early 2024. In this paper we will discuss the science cases and requirements for the overall architecture of GMagAO-X, as well as the current efforts to prototype the novel hardware components and new wavefront sensing and control concepts for GMagAO-X on HCAT., Comment: 16 pages, 22 figures, proceeding for AO4ELT7 (Avignon, France June 2023)

The 25.4m Giant Magellan Telescope (GMT) will be amongst the first in a new series of segmented extremely large telescopes (ELTs). The 25.4 m pupil is segmented into seven 8.4 m circular segments in a flower petal pattern. At the University of Arizona we have developed a novel pupil slicer that will be used for ELT extreme adaptive optics (ExAO) on the up and coming ExAO instrument, GMagAO-X. This comes in the form of a six-sided reflective pyramid with a hole through the center known as a "hexpyramid". By passing the GMT pupil onto this reflective optic, the six outer petals will be sent outward in six different directions while the central segment passes through the center. Each segment will travel to its own polarization independent flat fold mirror mounted on a piezoelectric piston/tip/tilt controller then onto its own commercial 3,000 actuator deformable mirror (DM) that will be employed for extreme wavefront control. This scheme of seven DMs working in parallel to produce a 21,000 actuator DM is a new ExAO architecture that we named a "parallel DM," in which the hexpyramid is a key optical component. This significantly surpasses any current or near future actuator count for any monolithic DM architecture. The optical system is designed for high-quality wavefront (lambda/10 surface PV) with no polarization errors and no vignetting. The design and fabrication of the invar mechanical mounting structure for this complex optical system is described in this paper., Comment: SPIE Astronomical Telescopes & Instrumentation 2022

GMagAO-X is the near first light ExAO coronagraphic instrument for the 25.4m GMT. It is designed for a slot on the folded port of the GMT. To meet the strict ExAO fitting and servo error requirement (<90nm rms WFE), GMagAO-X must have 21,000 actuator DM capable of >2KHz correction speeds. To minimize wavefront/segment piston error GMagAO-X has an interferometric beam combiner on a vibration isolated table, as part of this "21,000 actuator parallel DM". Piston errors are sensed by a Holographic Dispersed Fringe Sensor (HDFS). In addition to a coronagraph, it has a post-coronagraphic Lyot Low Order WFS (LLOWFS) to sense non-common path (NCP) errors. The LLOWFS drives a non-common path DM (NCP DM) to correct those NCP errors. GMagAO-X obtains high-contrast science and wavefront sensing in the visible and/or the NIR. Here we present our successful externally reviewed (Sept. 2021) CoDR optical-mechanical design that satisfies GMagAO-X's top-level science requirements and is compliant with the GMT instrument requirements and only requires COTS parts., Comment: 15 pages, 20 figures, Proc SPIE 12185 "Adaptive Optics Systems", "Telescopes and Instrumentation", July 2022, Montreal, Canada

We present the conceptual design of GMagAO-X, an extreme adaptive optics system for the 25 m Giant Magellan Telescope (GMT). We are developing GMagAO-X to be available at or shortly after first-light of the GMT, to enable early high contrast exoplanet science in response to the Astro2020 recommendations. A key science goal is the characterization of nearby potentially habitable terrestrial worlds. GMagAO-Xis a woofer-tweeter system, with integrated segment phasing control. The tweeter is a 21,000 actuator segmented deformable mirror, composed of seven 3000 actuator segments. A multi-stage wavefront sensing system provides for bootstrapping, phasing, and high order sensing. The entire instrument is mounted in a rotator to provide gravity invariance. After the main AO system, visible (g to y) and near-IR (Y to H) science channels contain integrated coronagraphic wavefront control systems. The fully corrected and, optionally, coronagraphically filtered beams will then be fed to a suite of focal plane instrumentation including imagers and spectrographs. This will include existing facility instruments at GMT via fiber feeds. To assess the design we have developed an end-to-end frequency-domain modeling framework for assessing the performance of GMagAO-X. The dynamics of the many closed-loop feedback control systems are then modeled. Finally, we employ a frequency-domain model of post-processing algorithms to analyze the final post-processed sensitivity. The CoDR for GMagAO-X was held in September, 2021. Here we present an overview of the science cases, instrument design, expected performance, and concept of operations for GMagAO-X., Comment: Submitted to Proceedings of SPIE