Search

We report a systematic study of the electrocatalytic properties and stability of a series of 1-2 nm Au, Pd, and AuPd alloy nanoparticles (NPs) for the ethanol oxidation reaction (EOR). Following EOR electrocatalysis, NP sizes and compositions were characterized using aberration-corrected scanning transmission electron microscopy (ac-STEM) and energy dispersive spectroscopy (EDS). Two main findings emerge from this study. First, alloyed AuPd NPs exhibit enhanced electrocatalytic EOR activity compared to either monometallic Au or Pd NPs. Specifically, NPs having a 3:1 ratio of Au:Pd exhibit an ~8-fold increase in peak current density compared to Pd NPs, with an onset potential shifted ~200 mV more to the negative compared to Au NPs. Second, the size and composition of AuPd alloy NPs do not (within experimental error) change following 1.0 or 2.0 h chronoamperometry experiments, while monometallic Au NPs increase in size from 2 to 5 nm under the same conditions. Notably, this report demonstrates the importance of post-catalytic ac-STEM/EDS characterization for fully evaluating NP activity and stability, especially for 1-2 nm NPs that may change in size or structure during electrocatalysis.

In recent years, microplastics have been found in seawater, soil, food, and even human blood and tissues. The ubiquity of microplastics is alarming, but the health and environmental impacts of microplastics are just beginning to be understood. Accordingly, sampling, separating, and quantifying exposure to microplastics to devise a total risk assessment is the focus of ongoing research. Unfortunately, traditional separation methods ( i.e. , size- and density-based methods) unintentionally exclude the smallest microplastics (<10 μm). Limited data about the smallest microplastics is problematic because they are likely the most pervasive and have distinct properties from their larger plastic counterparts. To that end, in this Perspective, we discuss using electrokinetic methods for separating the smallest microplastics. Specifically, we describe three methods for forming electric field gradients, discuss key results within the field for continuously separating microplastics, and lastly discuss research avenues which we deem critical for advancing electrokinetic separation platforms for targeting the smallest microplastics., Competing Interests: The authors state that there are no conflicts of interest., (This journal is © The Royal Society of Chemistry.)

A key goal of nanoparticle-based catalysis research is to correlate the structure of nanoparticles (NPs) to their catalytic function. The most common approach for achieving this goal is to synthesize ensembles of NPs, characterize the ensemble, and then evaluate its catalytic properties. This approach is effective, but it excludes the certainty of structural heterogeneity in the NP ensemble. One means of addressing this shortcoming is to carry out analyses on individual NPs. This approach makes it possible to establish direct correlations between structures of single NPs and, in the case reported here, their electrocatalytic properties. Accordingly, we report on enhanced electrocatalytic formic acid oxidation (FAO) activity using individual Cu-modified, high-indexed Pt NPs. The results show that the Cu-modified Pt NPs exhibit significantly higher currents for FAO than the Pt-only analogs. The increased activity is enabled by the Cu submonolayer on the highly stepped Pt surface, which enhances the direct FAO pathway but not the indirect pathway which proceeds via surface-absorbed CO*., Competing Interests: The authors declare no competing interests., (This journal is © The Royal Society of Chemistry.)

We report the presence of small clusters of atoms (<1 nm) (SCs) and single atoms (SAs) in solutions containing 1-2 nm dendrimer-encapsulated nanoparticles (DENs). Au and Pd DENs were imaged using aberration-corrected scanning transmission electron microscopy (ac-STEM), and energy dispersive spectroscopy (EDS) was used to identify and quantify the SAs/SCs. Two main findings have emerged from this work. First, the presence or absence of SAs/SCs depends on both the terminal functional group of the dendrimer (-NH 2 or -OH) and the elemental composition of the DENs (Au or Pd). Second, dialysis can be used to remove the majority of SAs/SCs in cases where a high density of SAs/SCs are present. The foregoing conclusions provide insights into the mechanisms for Au and Pd DEN synthesis and stability. Ultimately, these results demonstrate the need for careful characterization of systems containing nanoparticles to ensure that SAs/SCs, which may be below the detection limit of most analytical methods, are taken into consideration (especially for catalysis experiments).

We report on the use of silver nanodisks (AgNDs), having a diameter of 50 ± 8 nm and a thickness of 8 ± 2 nm, as electrochemical labels for the detection of a model metalloimmunoassay for the heart failure biomarker NT-proBNP. The detection method is based on an electrochemically activated galvanic exchange (GE) followed by the detection of Ag using anodic stripping voltammetry (ASV). The AgNDs labels are superior to Ag nanocubes and Ag nanospheres in terms of the dynamic range for both the model and NT-proBNP metalloimmunoassays. The linear dynamic range for the model composite is 1.5 to 30.0 pM AgNDs. When AgND labels are used for the NT-proBNP assay, the dynamic range is 0.03-4.0 nM NT-proBNP. The latter range fully overlaps the risk stratification range for heart failure from 53 pM to 590 pM. The performance improvement of the AgNDs is a result of the specific GE mechanism for nanodisks. Specifically, GE is complete across the face of the AgNDs, leaving behind an incompletely exchanged ring structure composed of both Ag and Au.

Here we report an easily fabricated, plastic-based lateral flow device for carrying out metalloimmunoassays. The device is called oc Flow to emphasize the open-channel design. We have shown that the oc Flow is capable of magnetic microbead (MμB)-based metalloimmunoassays for the detection of two types of immunoconjugates: a model composite (MC) and a sandwich immunoassay for the heart failure marker NT-proBNP. In both assays, Ag nanoparticles (AgNPs) were used as electrochemically detectable labels. NT-proBNP and MC concentrations as low as 750.0 pM and 10.0 pM, respectively, could be detected using the oc Flow device. Four key conclusions can be drawn from the results presented herein. First, immunoconjugates attached to the MμBs can be transported in the flow channel using combined hydrodynamic and capillary pressure passive pumping. Second, the oc Flow device is capable of on-chip storage, resolvation, and conjugate formation of both the MC and NT-proBNP composites. Third, electrochemical detection can be conducted on analytes suspended in serum by rinsing the electrodes with a wash buffer. Finally, and perhaps most significantly, the assay is quantitative and has a detection limit for NT-proBNP in the high picomolar range when the necessary reagents are stored on the device in a dry form.

In this article, we compare linear sweep anodic stripping voltammetry (LASV) and square-wave anodic stripping voltammetry (SWASV) for detection of a nano metalloimmunoassay. Two separate immunoassays were examined: a model assay, based on interactions between antibodies, and a sandwich assay for the heart failure marker NT-proBNP. In both cases, one antibody is linked to a magnetic microbead, and one is linked to a spherical Ag nanoparticle label. Electrochemical detection is carried out on a paper device. The three analytical figures of merit studied were the precision of the measurements, the calibration sensitivity, and the limit of detection (LOD). For the NT-proBNP assay, the results show that after optimization of the pulse amplitude and frequency of the potential input for SWASV, the detection efficiency is substantially higher compared to LASV. Specifically, the calibration sensitivity increased by up to ~40 fold, the average coefficient of variation decreased by ~40%, and the (LOD) decreased to 300.0 pM. Finally, for a model immunoassay, a ~10-fold decrease in the LOD was observed for SWASV compared to LASV.

The concept of nanoparticle-mediated electron transfer (eT) across insulating thin films was elucidated theoretically by Allongue and Chazalviel in 2011. In their model, metal nanoparticles (NPs) are immobilized atop passivating, self-assembled monolayers (SAMs). They found that under certain conditions, related to the thickness of the SAM and the size of the NPs, efficient faradaic oxidation and reduction reactions could proceed at the NP surface. In the absence of NPs, however, eT was suppressed by the insulating SAM thin films. Allongue and Chazalviel concluded that, within certain bounds, eT is mediated by fast tunneling between the conductive electrode and the metal NPs, while the kinetics of the redox reaction are controlled by the NPs. This understanding has been confirmed using a variety of experimental models. The theory is based on electron tunneling; therefore, the nature of the intervening medium (the insulator in prior studies) should not affect the eT rate. In the present manuscript, however, we show that the theory breaks down under certain electrochemical conditions when the medium between conductors is an n -type semiconductor. Specifically, we find that in the presence of either Au or Pt NPs immobilized on a thin film of TiO x , CO electrooxidation does not proceed. In contrast, the exact same systems lead to the efficient reduction of oxygen. At present, we are unable to explain this finding within the context of the model of Allongue and Chazalviel.

We report a method for electrochemical pH regulation in microdroplets generated in a microfluidic device. The key finding is that controlled quantities of reagents can be generated electrochemically in moving microdroplets confined within a microfluidic channel. Additionally, products generated at the anode and cathode can be isolated within descendant microdroplets. Specifically, ∼5 nL water-in-oil microdroplets are produced at a T-junction and then later split into two descendant droplets. During splitting, floor-patterned microelectrodes drive water electrolysis within the aqueous microdroplets to produce H + and OH - . This results in a change in the pHs of the descendant droplets. The droplet pH can be regulated over a range of 5.9 to 7.7 by injecting controlled amounts of charge into the droplets. When the injected charge is between -6.3 and 54.5 nC nL -1 , the measured pH of the resulting droplets is within ±0.1 pH units of that predicted based on the magnitude of the injected charge. This technique can likely be adapted to electrogeneration of other reagents within microdroplets.

We report a method for synthesizing and studying shape-controlled, single Pt nanoparticles (NPs) supported on carbon nanoelectrodes. The key advance is that the synthetic method makes it possible to produce single, electrochemically active NPs with a vast range of crystal structures and sizes. Equally important, the NPs can be fully characterized, and, therefore, the electrochemical properties of the NPs can be directly correlated to the size and structure of a single shape. This makes it possible to directly correlate experimental results to first-principles theory. Because just one well-characterized NP is analyzed at a time, the difficulty of applying a theoretical analysis to an ensemble of NPs having different sizes and structures is avoided. In this article, we report on two specific Pt NP shapes having sizes on the order of 200 nm: concave hexoctahedral (HOH) and concave trapezohedral (TPH). The former has {15 6 1} facets and the latter {10 1 1} facets. The electrochemical properties of these single NPs for the formic acid oxidation (FAO) reaction are compared to those of a single, spherical polycrystalline Pt NP of the same size. Finally, density functional theory, performed prior to the electrochemical studies, were used to interpret the experimental results of the FAO experiments.

In this paper we demonstrate the use of dual-shaped silver nanoparticles (AgNPs) as detection labels for electrochemical bioassays. The key finding is that by using AgNP labels having two different shapes simultaneously, the limit of detection (LOD) for the assays is lowered compared to using either of the two shapes separately. The two shapes were silver nanocubes (AgNCs) having edge lengths of 40 ± 4 nm and spherical AgNPs (sAgNPs) having diameters of 20 ± 3 nm. Two different bioassays were examined. In both cases the Ag labels were functionalized with antibodies. In the one assay, the labels are directly linked to a second antibody immobilized on magnetic beads. In the second assay, the antibodies on the AgNP labels and the antibodies on the magnetic beads are linked via a peptide. The peptide is N-terminal prohormone brain natriuretic peptide (NT-proBNP), which is a heart failure marker. The efficacy of the two electrochemical assays as a function of the ratio of the two labels was investigated using a galvanic exchange/anodic stripping voltammetry method. The key finding is that by optimizing the ratio of the two types of AgNP labels, it is possible to decrease the LOD of the assays without compromising the dynamic range compared to using either of the two labels independently. This made it possible to achieve the clinically relevant range for NT-proBNP analysis used by physicians for heart failure risk stratification., Competing Interests: Conflict of Interest The technology reported in this manuscript could eventually be used by Galvanyx, LLC. The corresponding author has an interest in this company.

Here we use experiments and finite element simulations to investigate the electrokinetics within straight microchannels that contain a bipolar electrode and an unbuffered electrolyte solution. Our findings indicate that in the presence of a sufficiently high electric field, water electrolysis proceeds at the bipolar electrode and leads to variations in both solution conductivity and ionic current density along the length of the microchannel. The significance of this finding is twofold. First, the results indicate that both solution conductivity and ionic current density variations significantly contribute to yield sharp electric field gradients near the bipolar electrode poles. The key point is that ionic current density variations constitute a fundamentally new mechanism for forming electric field gradients in solution. Second, we show that the electric field gradients that form near the bipolar electrode poles in unbuffered solution are useful for continuously separating microplastics from water in a bifurcated microchannel. This result expands the potential scope of membrane-free separations using bipolar electrodes., Competing Interests: The authors declare no conflict of interest., (This journal is © The Royal Society of Chemistry.)

The effect of serum on electrochemical detection of bioassays having silver nanoparticle (AgNP) detection labels was investigated. Both a model assay and an antigen-specific sandwich bioassay for the heart failure marker NT-proBNP were examined. In both cases, the AgNP labels were conjugated to a detection antibody. Electrochemical detection was carried out using a galvanic exchange/anodic stripping voltammetry method in which Au 3+ exchanges with AgNP labels. The assays were carried out using a paper-based electrode platform. The bioassays were exposed to different serum conditions prior to and during detection. There are three important outcomes reported in this article. First, both the model- and antigen-specific assays could be formed in undiluted serum with no detectable interferences from the serum components. Second, to achieve the maximum possible electrochemical signal, the highest percentage of serum that can remain in an assay buffer during electrochemical detection is 0.25% when no washing is performed. The assay results are rendered inaccurate when 0.50% or more of serum is present. Third, the factors inhibiting galvanic exchange in serum probably relate to surface adsorption of biomolecules onto the AgNP labels, chelation of Au 3+ by serum components, or both. The results reported here provide general guidance for using metal NP labels for electrochemical assays in biofluids.

Here, we report on the use of 40 ± 4 nm silver nanocubes (AgNCs) as electrochemical labels in bioassays. The model metalloimmunoassay combines galvanic exchange (GE) and anodic stripping voltammetry (ASV). The results show that a lower limit of detection is achieved by simply changing the shape of the Ag label yielding improved GE with AgNCs when compared to GE with spherical silver nanoparticles (sAgNPs). Specifically, during GE between electrogenerated Au 3+ and the Ag labels, a thin shell of Au forms on the surface of the NP. This shell is more porous when GE proceeds on AgNCs compared to sAgNPs, and therefore, more exchange occurs when using AgNCs. ASV results show that the Ag collection efficiency (AgCE%) is increased by up to ∼57% when using AgNCs. When the electrochemical system is fully optimized, the limit of detection is 0.1 pM AgNCs, which is an order of magnitude lower than that of sAgNP labels.

Peptide-functionalized nanoparticles (NPs) often rely on a well-defined peptide structure to function. Here, we report the attachment of model peptides to the ligand shell of AuNPs passivated with oligoethylene glycol (OEG). Specifically, peptides containing the repeating (LLKK) n motif plus either one or two reactive functional groups were covalently linked to OEG-capped, ∼5 nm AuNPs via the Cu + -catalyzed azide-alkyne cycloaddition reaction. This work builds on a previous study from our group in which an (LLKK) n peptide having two reactive functional groups was considered. Peptide attachment was confirmed by FTIR spectroscopy. Amino acid analysis was used to determine that 3-4 peptides were immobilized per AuNP. Circular dichroism spectroscopy revealed a structural change from random coil in solution to α-helical upon attachment to OEG-capped AuNPs. The key result of this study is that the nature of the capping layer on the AuNP surface influences peptide structure to a significant degree. Other important findings resulting from this work are that the AuNP-peptide conjugates reported here are water soluble and that the long axis of the helical peptides is oriented tangent to the AuNP surface. The latter point is important for applications involving biorecognition.

Here we report on hydride-terminated (HT) electrodeposition of Pt multilayers onto ∼1.6 nm Au nanoparticles (NPs). The results build on our earlier findings regarding electrodeposition of a single monolayer of Pt onto Au NPs and reports relating to HT Pt electrodeposition onto bulk Au. In the latter case, it was found that electrodeposition of Pt from a solution containing PtCl42- can be limited to a single monolayer of Pt atoms if it is immediately followed by adsorption of a monolayer of H atoms. The H-atom capping layer prevents deposition of Pt multilayers. In the present report we are interested in comparing the structure of NPs after multiple HT Pt electrodeposition cycles to the bulk analog. The results indicate that a greater number of HT Pt cycles are required to electrodeposit both a single Pt monolayer and Pt multilayers onto these Au NPs compared to bulk Au. Additionally, detailed structural analysis shows that there are fundamental differences in the structures of the AuPt materials depending on whether they are prepared on Au NPs or bulk Au. The resulting structures have a profound impact on formic acid oxidation electrocatalysis.

In this article, we report continuous sorting of two microplastics in a trifurcated microfluidic channel using a new method called serial faradaic ion concentration polarization (fICP). fICP is an electrochemical method for forming ion depletion zones and their corresponding locally elevated electric fields in microchannels. By tuning the interplay between the forces of electromigration and convection during a fICP experiment, it is possible to control the flow of charged objects in microfluidic channels. The key findings of this report are threefold. First, fICP at two bipolar electrodes, configured in series and operated with a single power supply, yields two electric field gradients within a single microfluidic channel ( i.e. , serial fICP). Second, complex flow variations that adversely impact separations during fICP can be mitigated by minimizing convection by electroosmotic flow in favor of pressure-driven flow. Finally, serial fICP within a trifurcated microchannel is able to continuously and quantitatively focus, sort, and separate microplastics. These findings demonstrate that multiple local electric field gradients can be generated within a single microfluidic channel by simply placing metal wires at strategic locations. This approach opens a vast range of new possibilities for implementing membrane-free separations., (This journal is © The Royal Society of Chemistry 2020.)

In the present article we report a new hybrid microfluidic device (hyFlow) comprising a disposable paper electrode and a three-dimensional (3D) printed plastic chip for the electrochemical detection of a magnetic bead-silver nanoparticle (MB-AgNP) bioconjugate. This hybrid device evolved due to the difficulty of incorporating micron-scale MBs into paper-only fluidic devices. Specifically, paper fluidic devices can entrap MB-containing conjugates within their cellulose or nitrocellulose fiber matrix. The hyFlow system was designed to minimize such issues and transport MB conjugates more efficiently to the electrochemical detection zone of the device. The hyFlow system retains the benefit of fluid transport by pressure-driven flow, however, no pump is required for its operation. The hyFlow device is capable of detecting either pre-formed MB-AgNP conjugates or conjugates formed in situ. The detection limit of AgNPs using this device is 12 pM, which represents just 22 AgNPs per MB.

In this paper, we demonstrate an electrochemical method for detection of the heart failure biomarker, N-terminal prohormone brain natriuretic peptide (NT-proBNP). The approach is based on a paper electrode assembly and a metalloimmunoassay; it is intended for eventual integration into a home-use sensor. Sensing of NT-proBNP relies on the formation of a sandwich immunoassay and electrochemical quantification of silver nanoparticle (AgNP) labels attached to the detection antibodies (Abs). There are four important outcomes reported in this article. First, compared to physisorption of the detection Abs on the AgNP labels, a 27-fold increase in signal is observed when a heterobifunctional cross-linker is used to facilitate this labeling. Second, the assay is selective in that it does not cross-react with other cardiac natriuretic peptides. Third, the assay forms in undiluted human serum (though the electrochemical analysis is carried out in buffer). Finally, and most important, the assay is able to detect NT-proBNP at concentrations between 0.58 and 2.33 nM. This performance approaches the critical NT-proBNP concentration threshold often used by physicians for risk stratification purposes: ∼0.116 nM.

The relationship between experiment and theory in electrocatalysis is one of profound importance. Until fairly recently, the principal role of theory in this field was interpreting experimental results. Over the course of the past decade (roughly the period covered by this review), however, that has begun to change, with theory now frequently leading the design of electrocatalytic materials. Though rewarding, this has not been a particularly easy union. For one thing, experimentalists and theorists have to come to grips with the fact that they rely on different models. Theorists make predictions based on individual, perfect structural models, while experimentalists work with more complex and heterogeneous ensembles of electrocatalysts. As discussed in this review, computational capabilities have improved in recent years, so that theory is better represented by the structures that experimentalists are able to prepare. Likewise, synthetic chemists are able to make ever more complex electrocatalysts with high levels of control, which provide a more extensive palette of materials for testing theory. The goal of this review is to highlight research from the last ∼10 years that focuses on carefully controlled electrocatalytic experiments which, in combination with theoretical predictions, bring us closer to bridging the gap between real catalysts and computational models.

Here we report on the use of heterobifunctional cross-linkers (HBCLs) to control the number, orientation, and activity of immunoglobulin G antibodies (Abs) conjugated to silver nanoparticles (AgNPs). A hydrazone conjugation method resulted in exclusive modification of the polysaccharide chains present on the fragment crystallizable region of the Abs, leaving the antigen-binding regions accessible. Two HBCLs, each having a hydrazide terminal group, were synthesized and tested for effectiveness. The two HBCLs differed in two respects, however: (1) either a thiol or a dithiolane group was used for attachment to the AgNP; and (2) the spacer arm was either a PEG chain or an alkyl chain. Both cross-linkers immobilized 5 ± 1 Abs on the surface of each 20-nm-diameter AgNP. Electrochemical results, obtained using a half-metalloimmunoassay, proved that Abs conjugated to AgNPs via either of the two HBCLs were 4 times more active than those conjugated by the more common physisorption technique. This finding confirmed that the HBCLs exerted orientational control over the Abs. We also demonstrated that the AgNP-HBCL-Ab conjugates were stable and active for at least 2 weeks. Finally, we found that the stability of the HBCLs themselves was related to the nature of their spacer arms. Specifically, the results showed that the HBCL having the alkyl chain is chemically stable for at least 90 days, making it the preferred cross-linker for bioassays.

In this article, experiment and theory are combined to analyze Pb and Cu underpotential deposition (UPD) on ∼1.7 nm Au nanoparticles (NPs) and the AuPt structures that result after galvanic exchange (GE) of the UPD layer for Pt. Experimental Pb (0.49 ML) and Pt (0.50 ML) coverages are close to values predicted by density functional theory-molecular dynamics (DFT-MD, 0.59 ML). DFT-MD reveals that the AuNPs spontaneously reconstruct from cuboctahedral to a (111)-like structure prior to UPD. In the case of Pb, this results in the random electrodeposition of Pb onto the Au surface. This mechanism is a consequence of opposing trends in Pb-Pb and Pb-Au coordination numbers as a function of Pb coverage. Cu UPD is more complex, and agreement between theory and experiment takes into account ligand effects (e.g., SO 4 2- present as the electrolyte) and the electric double layer. Importantly, AuPt structures formed upon Pt GE are found to differ markedly depending on the UPD metal. Specifically, cyclic voltammetry indicates that the Pt coverage is ∼0.20 ML greater for Cu UPD/Pt GE (0.70 ML) than for Pb UPD/Pt GE (0.50 ML). This difference is corroborated by DFT-MD theoretical predictions. Finally, DFT-MD calculations predict the formation of surface alloy and core@shell structures for Pb UPD/Pt GE and Cu UPD/Pt GE, respectively.

Extended X-ray absorption fine structure (EXAFS) spectroscopy is a premiere method for analysis of the structure and structural transformation of nanoparticles. Extraction of analytical information about the three-dimensional structure and dynamics of metal-metal bonds from EXAFS spectra requires special care due to their markedly non-bulk-like character. In recent decades, significant progress has been made in the first-principles modeling of structure and properties of nanoparticles. In this review, we summarize new approaches for EXAFS data analysis that incorporate particle structure modeling into the process of structural refinement.

We are interested in functionalizing gold nanoparticles (AuNPs) with proteins using a biomimetic approach in which an intermediate peptide "glue" directs the orientation of a protein relative to the AuNP surface. The first step toward this goal is described in the present article. Specifically, we show that ∼5 nm AuNPs can be functionalized with a mixed self-assembled monolayer (SAM) consisting of oligo(ethylene glycol) alkanethiols terminated with either hydroxyl or azide groups, and that the resulting materials are stable and soluble in water. The azide groups on the surface of the AuNPs can be subsequently linked to alkyne-functionalized peptides via a copper-catalyzed azide-alkyne cycloaddition (click) reaction. Analysis of the resulting material by Fourier transform infrared and circular dichroism spectroscopy demonstrates that the peptide is covalently linked to the SAM and that it exists in an α-helical conformation. In addition to our intended purpose of using these highly structured, biomimetic materials to orient proteins, they may also be useful for applications involving interactions between nanoparticles and cells.

Here we report on the seemingly simple process of galvanic exchange (GE) between electrogenerated AuCl 4 - and silver nanoparticles (AgNPs). The results were obtained in the specific context of using AgNPs as labels for bioassays in paper fluidic devices. Results obtained from a combined electrochemistry and microscopy study indicate that the GE process results in recovery of only ∼5% of the total equivalents of Ag present in the system. This low value is a consequence of two factors. First, after an initial fraction of each AgNP undergoes GE, a Au shell forms around the remaining AgNP core preventing further exchange. Second, to simulate a true biological fluid, the experiments were carried out in a Cl - -containing buffer. Consequently, some Ag + formed during GE precipitates as AgCl, and it also serves to block additional GE. Following optimization of the GE process, it was possible to detect AgNP label concentrations as low as 2.6 fM despite these limitations.

A microwave assisted method was used to synthesize RhAu nanoparticles (NPs). Characterization, based upon transmission electron microscopy (TEM), energy dispersive spectroscopy, and powder X-ray diffraction, provided the evidence of monomodal alloy NPs with a mean size distribution between 3 and 5 nm, depending upon the composition. Extended X-ray adsorption fine-structure spectroscopy (EXAFS) also showed evidence of alloying, but the coordination numbers of Rh and Au indicated significant segregation between the metals. More problematic were the low coordination numbers for Rh; values of ca. 9 indicate NPs smaller than 2 nm, significantly smaller than those observed with TEM. Additionally, no single-particle structural models were able to reproduce the experimental EXAFS data. Resolution of this discrepancy was achieved with high resolution aberration corrected scanning TEM imaging which showed the presence of ultra-small (<2 nm) pure Rh clusters and larger (∼3-5 nm) segregated particles with Au-rich cores and Rh-decorated shells. A heterogeneous model with a mixture of ultrasmall pure Rh clusters and larger segregated Rh/Au NPs was able to explain the experimental measurements of the NPs over the range of compositions measured. The combination of density functional theory, EXAFS, and TEM allowed us to quantify the heterogeneity in the RhAu NPs. It was only through this combination of theoretical and experimental techniques that resulted in a bimodal distribution of particle sizes that was able to explain all of the experimental characterization data.

Here we report that density functional theory (DFT) can be used to accurately predict how Au nanoparticle (NP) catalysts cooperate with SnO x ( x = 1.9 or 2.0) supports to carry out the oxygen reduction reaction (ORR). Specifically, dendrimers were used to encapsulate AuNPs and prevent their interactions with the underlying SnO x supports. After removal of the dendrimers, however, the AuNPs are brought into direct contact with the support and hence feel its effect. The results show that both SnO 1.9 and SnO 2.0 supports strongly enhance the electrocatalytic properties of AuNPs for the ORR. In the case of AuNP interaction with a SnO 1.9 support, the number of electrons involved in the ORR ( n eff ) increases from 2.1 ± 0.2 to 2.9 ± 0.1 following removal of the dendrimers, indicating an increased preference for the desired four-electron product (water), while the overpotential decreases by 0.32 V. Similarly, direct interactions between AuNPs and a SnO 2.0 support result in an increase in n eff from 2.2 ± 0.1 to 3.1 ± 0.1 and a reduction of the overpotential by 0.28 V. These experimental results are in excellent agreement with the theoretically predicted onset potential shift of 0.30 V. According to the DFT calculations, the observed activity enhancements are attributed to the existence of anionic Au resulting from electron transfer from surface oxygen vacancies within the SnO x supports to the AuNPs. This theoretical finding was confirmed experimentally using X-ray photoelectron spectroscopy. Importantly, the calculations reported here were performed prior to the experiments. In other words, this study represents an unusual case of theory accurately predicting the electrocatalytic manifestation of strong metal support interactions.

In this paper, we report the electrosynthesis and characterization of individual, shape-controlled Pt nanocrystals (NCs) electrodeposited on carbon nanoelectrodes (CNEs). Single Pt NCs were deposited onto the CNEs using an empirically developed square-wave potential program. Characterization by scanning electron microscopy indicates that the sizes of Pt NCs are remarkably reproducible (relative standard deviation = 6%). Electrochemically active surface areas, determined by Cu underpotential deposition and H adsorption/desorption analyses, are also reproducible. Selected area electron diffraction indicates that each Pt NC is comprised of just one single crystal (no grain boundaries). Although different square-wave potential programs lead to different types of crystals, the Pt NCs discussed here have a concave hexoctahedral geometry bound primarily by {13 6 2} surface facets. The results in this report represent a first step toward our ultimate goal of studying electrocatalysis at individual, shape-controlled, single-crystal nanoparticles.

Nitrogen is fundamental to all of life and many industrial processes. The interchange of nitrogen oxidation states in the industrial production of ammonia, nitric acid, and other commodity chemicals is largely powered by fossil fuels. A key goal of contemporary research in the field of nitrogen chemistry is to minimize the use of fossil fuels by developing more efficient heterogeneous, homogeneous, photo-, and electrocatalytic processes or by adapting the enzymatic processes underlying the natural nitrogen cycle. These approaches, as well as the challenges involved, are discussed in this Review., (Copyright © 2018 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works.)

In this report, we examine the structure of bimetallic nanomaterials prepared by an electrochemical approach known as hydride-terminated (HT) electrodeposition. It has been shown previously that this method can lead to deposition of a single Pt monolayer on bulk-phase Au surfaces. Specifically, under appropriate electrochemical conditions and using a solution containing PtCl 4 2- , a monolayer of Pt atoms electrodeposits onto bulk-phase Au immediately followed by a monolayer of H atoms. The H atom capping layer prevents deposition of Pt multilayers. We applied this method to ∼1.6 nm Au nanoparticles (AuNPs) immobilized on an inert electrode surface. In contrast to the well-defined, segregated Au/Pt structure of the bulk-phase surface, we observe that HT electrodeposition leads to the formation of AuPt quasi-random alloy NPs rather than the core@shell structure anticipated from earlier reports relating to deposition onto bulk phases. The results provide a good example of how the phase behavior of macro materials does not always translate to the nano world. A key component of this study was the structure determination of the AuPt NPs, which required a combination of electrochemical methods, electron microscopy, X-ray absorption spectroscopy, and theory (DFT and MD).

In this paper, we show that Au nanoparticles (AuNPs) stabilized with either citrate or by low-generation dendrimers rapidly grow during electrocatalytic reduction of CO 2 . For example, citrate-stabilized AuNPs and AuNPs encapsulated within sixth-generation, hydroxyl-terminated, poly(amidoamine) dendrimers (G6-OH DENs) having diameters of ∼2 nm grow substantially in size (to 6-7 nm) and polydispersity during just 15 min of electrolysis at -0.80 V (vs RHE). This degree of instability makes it impossible to correlate the structure of AuNPs determined prior to electrocatalysis to their catalytic function. In contrast to the G6-OH dendrimer, the higher generation G8-OH analogue stabilizes AuNPs under the same conditions that lead to instability of the other two materials. More specifically, G8-OH DENs having an initial size of 1.7 ± 0.3 nm increase to only 2.2 ± 0.5 nm during electrolysis in 0.10 M NaHCO 3 at -0.80 V (vs RHE). Even when the electrolysis is carried out at -1.20 V, the higher-generation dendrimer stabilizes encapsulated AuNPs. This is presumably due to the compactness of the periphery of the G8-OH dendrimer. Although the G8-OH dendrimer nearly eliminates AuNP growth, the surface of the AuNP is still accessible for electrocatalytic reactions. The smaller, more stable G8-OH DENs strongly favor formation of H 2 over CO. Some previous reports have suggested that AuNPs in the ∼2 nm size range yield primarily CO, but we believe these findings are a consequence of the growth of the AuNPs during catalysis and do not reflect the true function of ∼2 nm AuNPs.

We report the structural characterization of 1-2 nm Rh and RhAu alloy dendrimer-encapsulated nanoparticles (DENs) prepared by chemical reduction with NaBH 4 . In contrast to previously reported results, in situ and ex situ X-ray absorption spectroscopic experiments indicate that only a fraction of the Rh 3+ present in the precursors are reduced by NaBH 4 . Additional structural analysis of RhAu alloy DENs using extended X-ray absorption fine structure spectroscopy leads to a model in which there is significant segregation of Rh and Au within the nanoparticles. In Rh-rich alloy DENs, Au atoms are segregated on the nanoparticle surface.

Here, we report a new kind of microelectrochemical flow system that is well suited for studying electrode modifications, like thin films prepared by atomic layer deposition (ALD), that require substrates to have a two-dimensional form factor. The design provides a means for electrodes to be modified ex situ and then incorporated directly into the flow cell. The electrodes can be removed after testing and further modified or tested before being reincorporated into the flow cell. Using this cell, mass-transfer coefficients up to 0.011 cm/s and collection efficiencies up to 57 ± 10% have been achieved. Electrodes modified with an ultrathin layer of ALD Al 2 O 3 and an overlayer of Pt dendrimer-encapsulated nanoparticles (DENs) have been incorporated into the flow cell and their electrocatalytic properties evaluated. Subsequently, the dendrimer was removed from the Pt DENs using a UV/O 3 treatment, and this provided direct contact between the Al 2 O 3 layer and the NPs. Finally, the product distribution for the oxygen reduction reaction (water vs H 2 O 2 ) was evaluated in the presence and absence of Pt-Al 2 O 3 support interactions.

The objective of this paper is development of an inexpensive point-of-care sensor for detecting the primary heart failure marker peptide, NT-proBNP. The device technology is based on an antibody sandwich assay, but with three innovative aspects. First, chemical amplification is carried out via oxidation of silver nanoparticles (NPs) attached to signaling antibodies rather than by enzymatic amplification. The electrochemical method is faster and eliminates the need for long-term storage of enzymes. Second, the antibody sandwich is formed on mobile magnetic beads. This enhances the rate of mass transfer of the biomarker and the signaling antibody to the primary detection antibody, which is immobilized on the magnetic beads. Third, the sensor itself is fabricated on a paper platform with screen-printed electrodes. This coupled with assembly by simple paper folding, keeps the cost of the sensor low. Here, we report on two separate assays. The first is based on a simple biotin-streptavidin conjugate, which is a preliminary model for the antibody assay. The results indicate a detection limit of 2.1 pM of silver NPs and an assay time of 7 min. The actual NT-proBNP antibody assay takes somewhat longer, and the dynamic detection range is higher: 2.9-582 nM. On the basis of the results presented in this paper, we conclude that this inexpensive paper-based sensor represents a viable technology for point-of-care testing of NT-proBNP, but nevertheless several challenges remain prior to clinical implementation. These include attaining a lower detection limit and better reproducibility, and optimizing the device for human blood.

We report the use of microfluidic surface titrations (MSTs) for studying electroactive self-assembled monolayers (eSAMs) and other thin films. The technique of MST utilizes a microfluidic generation-collection dual channel electrode (DCE) configuration to quantify the charge associated with electroactive thin films that might or might not be in direct contact with an electrode surface. This technique allows for quantitative measurement of surface coverages, Γ, as low as 30 pmol cm -2 for electrodeposited Cu thin films. Additionally, we show that it is possible to quantify Γ for ferrocene (Fc)-terminated alkylthiols in mixed-monolayer eSAMs. Interestingly, MSTs sometimes reveal a two-fold higher eSAM concentration compared to direct electrochemical measurements. This finding suggests that in these instances not all the constituent Fc-moieties of the eSAM are in sufficiently close proximity to the surface to be addressable via direct electrochemistry.

In this article we report a microelectrochemical system that is able to partially desalinate water. The underlying principles are similar to previous reports in which a local electric field resists passage of ions. However, in the present case, no membrane is required and, most interestingly, much of the power for desalination originates from light rather than electricity. This could greatly increase the power efficiency for desalination. The device is based on a TiO 2 photoanode coupled to a Pt cathode. Illumination of the photoanode drives faradaic reactions at the cathode that lead to an ion depletion zone. The resulting local electric field limits transport of charged species. In situ conductivity and fluorescence measurements demonstrate the effectiveness of the device.

Here we report a sensing scheme for detection of microRNA (miRNA) using electrocatalytic amplification (ECA). ECA is a method in which nanoparticles (NPs) that are catalytic for a specific electrochemical reaction collide with an inert electrode surface. Each collision results in a detectable current transient. In the present article, we show that this general approach can be extended to detection of miRNA. Specifically, PtNPs are modified with a single-strand DNA (ssDNA) shell that is complementary to the miRNA target. Next, the ssDNA:miRNA conjugate is formed, which passivates the PtNP surface. In the presence of an enzyme called duplex specific nuclease (DSN), however, a fraction of the surface-bound DNA is removed thereby exposing some of the PtNP surface. In other words, the electrocatalytic properties of the PtNPs are reactivated only if miRNA complementary to ssDNA is present. This methodology resolves a number of problems that have rendered ECA ineffective for biosensing applications. Moreover, the results suggest that the underlying chemistry is broadly applicable to nucleic acid sensing.

In this paper, we show that PtAu and PdAu random alloy dendrimer-encapsulated nanoparticles with an average size of ∼1.6 nm have different catalytic activity trends for allyl alcohol hydrogenation. Specifically, PtAu nanoparticles exhibit a linear increase in activity with increasing Pt content, whereas PdAu dendrimer-encapsulated nanoparticles show a maximum activity at a Pd content of ∼60%. Both experimental and theoretical results suggest that this contrasting behavior is caused by differences in the strength of H binding on the PtAu and PdAu alloy surfaces. The results have significant implications for predicting the catalytic performance of bimetallic nanoparticles on the basis of density functional theory calculations.

We describe the design and characteristics of a paper-based analytical device for analyte concentration enrichment. The device, called a hybrid paper-based analytical device (hyPAD), uses faradaic electrochemistry to create an ion depletion zone (IDZ), and hence a local electric field, within a nitrocellulose flow channel. Charged analytes are concentrated near the IDZ when their electrophoretic and electroosmotic velocities balance. This process is called faradaic ion concentration polarization. The hyPAD is simple to construct and uses only low-cost materials. The hyPAD can be tuned for optimal performance by adjusting the applied voltage or changing the electrode design. Moreover, the throughput of hyPAD is 2 orders of magnitude higher than that of conventional, micron-scale microfluidic devices. The hyPAD is able to concentrate a range of analytes, including small molecules, DNA, proteins, and nanoparticles, in the range of 200-500-fold within 5 min.

This article provides a summary of the Faraday Discussion on single entity electrochemistry held in York, U.K., in early September, 2016. The introduction provides some context for thinking about electrochemical studies of single entities. The next four sections follow the themes of the meeting as they relate to single-entity electrochemistry: (1) nanoparticles, nanotubes, and nanowires; (2) nanopores and nanofluidics; (3) complex surfaces and reactions at the nanoscale; and (4) molecular electroanalysis. Each paper presented at the Discussion is summarized, and some personal thoughts as to the significance of the findings, the technical advances that made the experiments possible, and common themes between articles are interspersed. Finally, at the end, I round-up my impressions and provide them in a succinct list.

We report a new and general approach that will be useful for adapting the method of electrocatalytic amplification (ECA) to biosensing applications. In ECA, individual collisions of catalytic nanoparticles with a noncatalytic electrode surface lead to bursts of current. In the work described here, the current arises from catalytic electrooxidation of N 2 H 4 at the surface of platinum nanoparticles (PtNPs). The problem with using ECA for biosensing applications heretofore, is that it is necessary to immobilize a receptor, such as DNA (as in the case here) or an antibody on the PtNP surface. This inactivates the colliding NP, however, and leads to very small collision signatures. In the present article, we show that single-stranded DNA (ssDNA) present on the PtNP surface can be detected by selectively removing a fraction of the ssDNA using the enzyme Exonuclease I (Exo I). About half of the current associated with collisions of naked PtNPs can be recovered from fully passivated PtNPs after exposure to Exo I. Experiments carried out using both Au and Hg ultramicroelectrodes reveal some mechanistic aspects of the collision process before and after treatment of the ssDNA-modified PtNPs with Exo I.

In this paper, we show that the onset potential for CO oxidation electrocatalyzed by ∼2 nm dendrimer-encapsulated Pt nanoparticles (Pt DENs) is shifted negative by ∼300 mV in the presence of a small percentage (<2%) of Cu surface atoms. Theory and experiments suggest that the catalytic enhancement arises from a cocatalytic Langmuir-Hinshelwood mechanism in which the small number of Cu atoms selectively adsorb OH, thereby facilitating reaction with CO adsorbed to the dominant Pt surface. Theory suggests that these Cu atoms are present primarily on the (100) facets of the Pt DENs.

We report that ultraviolet/ozone (UV/O3) treatment can be used to remove sixth-generation, hydroxyl-terminated poly(amidoamine) (PAMAM) dendrimers from dendrimer-encapsulated Pt nanoparticles (Pt DENs) previously immobilized onto a pyrolyzed photoresist film (PPF) electrode. Results from X-ray photoelectron spectroscopy, scanning transmission electron microscopy, and electrochemical experiments indicate that removal of the dendrimer proceeds without changes to the size, shape, or electrocatalytic properties of the encapsulated nanoparticles. The UV/O3 treatment did not damage the PPF electrode. The electrocatalytic properties of the DENs before and after removal of the dendrimer were nearly identical.