Search

• A comparative study between photovoltaic and low-e insulated glass units were conducted experimentally. • The net energy saving potential of the BIPV IGU was identified based on the power, thermal and daylighting performance. • BIPV IGU is better than Low-E IGU in reducing discomfort glare. • BIPV IGC can reduce the cooling energy consumption significantly. • About 16.8% electricity can be saved by replacing Low-E IGU with BIPV IGU. A novel semi-transparent building integrated photovoltaic (BIPV) laminate was developed and introduced in this paper. It was produced by cutting standard mono-crystalline silicon solar cells into small strips and then making electrical connections between each strip before laminating the cells between two layers of glass. The overall energy performance and energy saving potential of the BIPV insulated glass unit (IGU) under real world conditions were identified through a side by side comparative study. Compared to the reference IGU, the BIPV IGU had lower solar heat gain coefficient (SHGC) but much higher U-factor. The average HVAC electricity saving of the BIPV IGU was about 10% relative to the reference IGU. Daylighting measurement and analysis were carried out to evaluate the trade-offs associated with the BIPV IGU between daylight, glare, and lighting energy use. The results indicated that the BIPV IGU is better than the reference IGU in reducing discomfort glare. However, if the most conservative viewpoint near the window is used for the assessment, a lower transmittance BIPV IGU is required to bring the overall discomfort levels below the perceptible level. Lastly, the net energy saving potential associated with the novel BIPV IGU was identified based on the power, thermal and daylighting performance. On average, the BIPV IGU saved 16.8% of the total electricity use of the room. Further studies and improvement on the energy conversion efficiency of solar cells, the optimal transmittance as well as the thermal properties would make this technology more energy-efficient and affordable. [ABSTRACT FROM AUTHOR]

• A novel c-Si based semi-transparent BIPV laminate was introduced. • Energy performance of the BIPV insulated glass unit (IGU) was investigated. • The BIPV laminate has high energy conversion efficiency and visible transmittance. • The BIPV laminate could reduce discomfort glare compared to clear glass windows. • The shade effect was influenced by the solar cell configurations and shading patterns. This paper introduces a novel c-Si based building integrated photovoltaic (BIPV) laminate. It was produced by cutting standard crystalline silicon solar cells into narrow strips and then automatically welding and connecting the strips into continuous strings for laminating between two layers of glass. The overall energy performance of the BIPV insulated glass unit (IGU) including power, thermal and daylighting performance was investigated experimentally. The daily energy conversion efficiency of the active solar cell area was about 15% on sunny days, but it was less than 12% on cloudy days and overcast days. Due to the combined effect of both the semi-transparent PV laminate and the insulated glass unit, the solar heat gain coefficient (SHGC) of the BIPV IGU was as low as 0.25, which was much lower than commonly used glazing windows. Daylight analysis by means of high dynamic range (HDR) cameras and daylight glare probability (DGP) indicated that the BIPV IGU could reduce discomfort glare to some extent compared to clear glass windows. The net energy production of the BIPV IGU was estimated without considering the differences in HVAC energy use in this study. The artificial lighting energy consumption was about 431 W h/day while the average BIPV electricity production for the same period was 1940 W h/day. The net power generation was therefore 1509 W h/day for this BIPV IGU in Berkeley, California. Shading tests for the BIPV IGU were also conducted and the results revealed that the vertical configuration of solar cell wiring in the BIPV laminates was much more sensitive to horizontal shading patterns than vertical shading models. Thus, if shading was unavoidable in some cases, a reasonable arrangement of PV strings should be considered to bring down the energy loss as much as possible. Also, the impacts of environmental factors on the energy conversion efficiency of BIPV IGU were analyzed. Specifically, the power output declined by 0.42% of the peak power for each Celsius degree temperature rise. Thus, if more attention was paid to the heat dissipation issue of BIPV IGU, the overall energy conversion efficiency would be improved. [ABSTRACT FROM AUTHOR]

This paper presents the annual overall energy performance and energy-saving potential of a ventilated photovoltaic double-skin facade (PV-DSF) in a cool-summer Mediterranean climate zone. A numerical simulation model based on EnergyPlus was utilized to simulate the PV-DSF overall energy performance, simultaneously taking into account thermal power and daylight. Based on numerical model, sensitivity analyses about air gap width and ventilation modes have been lead in Berkeley (California) with the aim to optimize unit’s structure design and operational strategy of PV-DSF. Via simulation, the overall energy performance including thermal, power and daylighting of the optimized PV-DSF was evaluated using the typical meteorological year (TMY) weather data. It was found that per unit area of the proposed PV-DSF was able to generate about 65 kW h electricity yearly. If high efficiency cadmium telluride (CdTe) semi-transparent PV modules are adopted, the annual energy output could be even doubled. The PV-DSF studied, also featured good thermal and daylighting performances. The PV-DSF can effectively block solar radiation while still providing considerable daylighting illuminance. Due simply to excellent overall energy performance, a PV-DSF at Berkeley can reduce net electricity use by about 50% compared with other commonly used glazing systems. Efficiency improvements of semi-transparent PV modules would further increase the energy saving potential of a PV-DSF and thus making this technology more promising. [ABSTRACT FROM AUTHOR]

• A comprehensive parametric study of roller shades and cellular shades. • Identify key parameters affecting window attachment's energy performance through simulation results. • Sensitivity analysis of different parameters. • A new index for a unified assessment of different window attachments. This paper investigated the energy performance of window attachments and analyzed the impact of window attachments' parameters on air conditioning energy consumption of residential buildings in a cooling-dominated city (Houston) and a heating-dominated city (Minneapolis). Roller and cellular shades were selected as research objects in this study. Nine parameters related to window attachment energy performance were chosen as the probable important influence factors for the parametric study. Three values, high, medium and low levels, were set for each parameter, resulting in a total of 9520 (roller) and 9072 (cellular) combinations respectively. The optical and thermal properties of each combination were calculated with Berkeley Lab WINDOW program before coupling with an EnergyPlus typical residential building model. Based on simulation results, an annual energy performance (AEP) index was proposed to rate the energy saving potential of window attachments. Key parameters which have significant impacts on air conditioning energy consumption were determined through the parameter sensitivity analysis. The research results indicated that solar transmittance and solar reflectance are the most influential factors to the energy performance of window attachments among the nine selected parameters. The current cellular shade could achieve the AEP h and AEP c of 0.19 and 0.12. Among all combinations, the best AEP h and AEP c of cellular shades are 0.68 and 0.89, respectively. Besides, as for roller shades, the current level of AEP h and AEP c are 0.14 and 0.09, and the optimal AEP h and AEP c are 0.43 and 0.79. [ABSTRACT FROM AUTHOR]

Venetian blinds are widely used to improve the performance of window systems, while their energy-saving potentials vary with different materials. This paper aims to undertake a standardized evaluation of the annual energy-saving potential of venetian blinds in residential buildings, and identify the most influential parameters for design optimization. To achieve this goal, nine parameters were chosen to establish venetian blinds models in WINDOW. Then, 9072 shading models were coupled with building models for annual energy consumption simulation in EnergyPlus, where the shading schedule was derived from questionnaires. Further, an experiment was conducted to verify the reliability of the joint simulation between WINDOW and EnergyPlus. Finally, annual energy performance (AEP) was adopted for a standardized energy efficiency evaluation of various venetian blinds products, and the sensitivity analysis of AEP to various parameters was conducted to identify the key parameters. The results indicated that by adjusting the key parameters of the venetian blinds, cooling energy saving can reach 44% and the heating energy saving can be up to 65%. The significant energy saving potential of venetian blinds indicates the prospect and importance of their use in residential buildings. • A standardized evaluation method for venetian blinds was proposed. • The accuracy of joint-simulation of WINDOW and EnergyPlus was validated. • Conductivity of venetian blinds has few impacts on their energy performance. • Solar reflectance and transmittance are two key parameters for energy savings. • 65% heating energy consumptions can be saved by adjusting material parameters. [ABSTRACT FROM AUTHOR]