Search

We consider the incompressible viscous surface wave problem in the setting that the fluid domain is a horizontal infinite layer in 3 D. The fluid dynamics is governed by the gravity-driven incompressible Navier–Stokes equations, and the effect of surface tension is ignored on the upper free surface. We prove the optimal time-decay rate of the low-order energy of the solution with minimal derivative count 3, which implies that the Lipschitz norm of the velocity decays at the rate (1 + t) − 1. This together with a time-weighted estimate for the highest order spatial derivatives of the free surface function leads to the boundedness of the high-order energy, which improves the result of Wang [9]. [ABSTRACT FROM AUTHOR]

The decomposition of carcasses by scavengers and microbial decomposers is an important component of the biochemical cycle that can strongly alter the chemical composition of soils locally. Different scavenger guilds are assumed to have a different influence on the chemical elements that leak into the soil, although this assumption has not been empirically tested. Here, we experimentally determine how different guilds of vertebrate scavengers influence local nutrient dynamics. We performed a field experiment in which we systematically excluded different subsets of vertebrate scavengers from decomposing carcasses of fallow deer (Dama dama), and compared elemental concentrations in the soil beneath and in the vegetation next to the carcasses over time throughout the decomposition process. We used four exclusion treatments: excluding (1) no scavengers, thus allowing them all; (2) wild boar (Sus scrofa); (3) all mammals; and (4) all mammals and birds. We found that fluxes of several elements into the soil showed distinct peaks when all vertebrates were excluded. Especially, trace elements (Cu and Zn) seemed to be influenced by carcass decomposition. However, we found no differences in fluxes between partial exclusion treatments. Thus, vertebrate scavengers indeed reduce leakage of elements from carcasses into the soil, hence influencing local biochemical cycles, but did so independent of which vertebrate scavenger guild had access. Our results suggest that carcass-derived elements are dispersed over larger areas rather than locally leak into the soil when vertebrate scavengers dominate the decomposition process. [ABSTRACT FROM AUTHOR]

Circular RNA is a group of covalently closed, single-stranded transcripts with unique biogenesis, stability, and conformation that play distinct roles in modulating cellular functions and also possess a great potential for developing circular RNA-based therapies. Importantly, due to its circular conformation, circular RNA generates distinct intramolecular base pairing that is different from the linear transcript. In this perspective, we review how circular RNA conformation can affect its turnover and modes of action, as well as what factors can modulate circular RNA conformation. We also discuss how understanding circular RNA conformation can facilitate learning about their functions as well as the remaining technological issues to further address their conformation. These efforts will ultimately inform the design of circular RNA-based platforms for biomedical applications. Circular RNAs play distinct cellular roles and possess great potential for developing RNA-based therapies. Liu et al. discuss how one can leverage circular RNA conformation for a better understanding of its turnover and function as well as for a better design of circular RNA-based modalities. [ABSTRACT FROM AUTHOR]

This study examined the association between a dental implant and changes in adjacent teeth over time. Electronic health records of 1818 patients who received a dental implant were retrospectively evaluated over 14 years (2005–2019) in a university setting. The status of the adjacent tooth and vertical and horizontal distance from the implant platform to adjacent teeth were determined using digital intraoral radiographs taken at baseline and the last follow-up visit (1–14 years, median 4 years). In total, 1085 dental implants were evaluated. There were 234 instances of a change in the adjacent tooth. Decay was observed in 83 (7.6%) of adjacent teeth; the mean time to development was 4 years (range 1–14 years). Approximately 9% of adjacent teeth received direct restorations, 4.8% received indirect restorations, 1% received endodontic root canal treatment, and 5.6% were extracted. The mean horizontal distance between the implant platform and the adjacent teeth was 3.56 mm; the mean vertical distance from the contact point to the alveolar crest on the tooth side was 6.2 mm at the first time of the reported decay on X ray. These distances did not significantly influence the occurrence of caries. The prevalence of interproximal contact loss was higher on the mesial of the implant crown at 63% compared with 20% on the distal side. This large retrospective analysis identified that teeth adjacent to a dental implant were at risk of decay and changes in their condition. In addition, the implant-to-tooth distance and inadequate emergence profile may contribute as caries risk factors in addition to hygiene and a high sugar level diet. These findings appear essential for clinicians when making treatment decisions and discussing outcomes with patients. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Plant Production is the property of Egyptian National Agricultural Library (ENAL) and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

This study aimed to assess the cold storage preservation of 'BRS Vitoria' seedless grape by combining SO2-generating pads. 'BRS Vitoria' grapes were freshly harvested from a commercial vineyard in Marialva, PR, Brazil. The trial was carried out in a completely randomized design with four treatments and five replications, and each plot consisted of five bunches individually packaged in clamshells. Treatments included (a) control (without SO2 pads), (b) field ultrafast SO2-generating pad before packaging (FieldSO2), (c) dual-release SO2-generating pad during cold storage (DualSO2), and (d) FieldSO2 + DualSO2. After being harvested, bunches subjected to FieldSO2 treatments were placed in a 20 kg harvest box with perforated liners. Subsequently, the FieldSO2 was placed on top of the grapes, and the liner was sealed for 4 h. Afterwards, bunches were packaged according to the treatments, and the boxes were kept in cold storage (1 °C ± 1 °C) for 60 days and at room temperature for 3 days. After 60 days of cold storage, by using a combination of FieldSO2 and DualSO2 pads, the cold preservation of 'BRS Vitoria' grape bunches can be extended up to 60 days with total absence of gray mold with fresh stems, with no negative impact on weight loss, shattered berries or even bleaching. This treatment can be used to optimize the cold storage period of 'BRS Vitoria', especially for export markets, where long periods of cold preservation are required. [ABSTRACT FROM AUTHOR]

Introduction: During the 1990s, German literature saw an influx of writers who had lived through the East German regime. These authors reflected the events that led up to the Berlin Wall’s fall and Germany’s reunification. Wolfgang Hilbig’s novel, “I”, is a prominent example of these works, called “turning literature”. This fiction depicts the absurdities of life under a fading ideology and the alienation of power institutions from social developments. The present article first examines historical context and the role of literature in East Germany to provide a deeper understanding of the themes and plot of the novel “I”. Then, it analyzes the concept of “simulacra”, which refers to the disconnection of signs from reality in modern social relations according to French sociologist Jean Baudrillard’s theories. The article further criticizes Hilbig’s literary interpretation of this concept and the various manifestations of “simulacra” in the narrative layers of “I”. Background of the Study: The novel “I” was published in 1993 and has since been translated into multiple languages, receiving praise from literary circles. However, it has yet to be researched in the Persian language. German-speaking critics have referenced Wolfgang Hilbig’s works while critiquing contemporary German literature. The present article cites some of those critiques. One significant source is a collection of articles titled “Two Separate Areas of Literature. German Literature of the 1990s in the East and the West” (2000) published in the literary journal Text and Criticism, which includes a section dedicated to “I”. Moreover, Helmut Luger conducted a detailed study in 2010, focusing on themes such as “alienation, loss of reality, and simulation” in Hilbig’s novels and analyzing their narrative structure and linguistic characteristics. Methodology: The novel “I”, which Wolfgang Hilbig started writing before the fall of the Berlin Wall, presents various interpretations of the concept of “simulacra” and its representations in the discourse of power. This concept in the semiotic debates of the 1980s indicated the remoteness of signs from their origin. However, philosophers and thinkers like Jean Baudrillard and Gilles Deleuze have different interpretations of this concept. The present article reviews and evaluates the opinions of various theorists on the concept of “simulacra”. It assesses which philosophical and sociological theories align with the works of Hilbig and also examines how applying this concept to the literary text expands its meaning beyond the frameworks of these theorists. Conclusion: In this article, we reviewed the history and thematic characteristics of “turning literature” and examined one of the essential elements of the novel, i.e., “simulacra”. We found that this concept, which Jean Baudrillard presented to represent modern social relations in the digital age, has a different meaning in Wolfgang Hilbig’s works. Simulacra in “I” is manifested in the context of a pervasive disciplinary system or a “hyperreality” whose ultimate goal is to consolidate power relations. This concept primarily refers to the simulation of ideas and actions resulting from imposing ideological illusions on society. These ideas and actions have become outdated and ineffective models on the verge of the collapse of Eastern Bloc systems. Although Baudrillard and Hilbig consider different social contexts, convergences can also be observed in their interpretations of the concept of “simulacra”. Both philosophers and writers, whether in the field of theorizing or in the scope of the literary text, aim to critique stagnant and fragmented social relations that are far away from reality and reproduce previous patterns in an automated way. [ABSTRACT FROM AUTHOR]

Copyright of Acta Odontologica Turcica is the property of Acta Odontologica Turcica and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Fractional derivatives are suitable for describing several physical phenomena. The construction of efficient analytical and numerical methods for the solutions of ordinary and partial fractional differential equations is an active research area and it is of great interest to the researchers. The Caputo fractional derivative is of great use in the modelling and simulation of phenomena where consideration is given to the interactions within the past and problems with nonlocal properties. This study considers the use of a hybrid of the Sumudu Transform method for constructing the solution of nonlinear equations that describe the processes in the functional and structural materials. This study considers the models that are given by the integer-order derivatives, Caputo derivatives of fractional variable orders and Caputo derivatives of fractional variable orders that are associated with delays. The study applies a hybrid of Sumudu Transform to present solutions for each considered model and makes use of graphs to show the correlation among the models. The study is of great importance in the numerical and experimental characterization of the decay properties of functional and structural materials. [ABSTRACT FROM AUTHOR]

In this paper, we are concerned with L 2 decay of weak solutions of several well-known incompressible fluid models, such as the n-dimensional ( n ≥ 2 ) Navier–Stokes equations with fractional hyperviscosity, the three-dimensional convective Brinkman–Forchheimer equations and the generalized SQG equation. A new approach, different from the classical Fourier splitting method develpoed by Schonbek (Commun Partial Differ Equ 11:733–763, 1986) and the spectral representation technique by Kajikiya and Miyakawa (Math Z 192:135-148,1986), is presented. By using the new approach, we can recover and improve some known decay results. [ABSTRACT FROM AUTHOR]

In this paper, we consider a planar viscous shock of moderate strength for a scalar viscous conservation law in multi-D. We consider a strictly convex flux, as a small perturbation of the Burgers flux, along the normal direction to the shock front. However, for the transversal directions, we do not have any restrictions on flux function. We first show the contraction property for any large perturbations in L2 of the planar viscous shock. If the initial L2-perturbation is also in L1, the large perturbation converges to zero in L2 as time goes to infinity with t−1/4 decay rate. The contraction and decay estimates hold up to dynamical shift. For the results, we do not impose any smallness conditions on the initial value. This result extends the 1D case [M.-J. Kang and A. F. Vasseur, L2-contraction for shock waves of scalar viscous conservation laws, Ann. Inst. H. Poincaré C Anal. Non Linéaire 34 (2017) 139–156] by the first author and Vasseur to the multi-dimensional case. [ABSTRACT FROM AUTHOR]

In this paper we focus on two aspects. First we study the initial-value problem of the Timoshenko-Fourier system with memory-type dissipation. By using the method of energy estimate combined with the technique of Fourier analysis, we obtain the decay estimates of solutions to the problem. Then we deal with the open problem proposed by N. Mori and S. Kawashima in the paper [18] entitled "Decay property of the Timoshenko-Cattaneo system" from the point view of energy estimate. [ABSTRACT FROM AUTHOR]

Salt crystallization is a particularly relevant issue in the conservation of limestones used in Cultural Heritage sites. In this study, various facies of limestones were characterized through porosimetric and mechanical tests. The samples were subjected to experiments to determine their resistance to salt crystallization by verifying the number of cycles at which 50% of them began to lose weight. This number of experimental cycles was compared with the result calculated by the analytical procedure of a chemomechanical model found in the literature. The comparison showed a significant capability of the model to predict the experimental data. [ABSTRACT FROM AUTHOR]

High-level waste (HLW) separation into fractions simplifies isolation in matrices and disposal. One of these fractions consists of rare earths (REE) and minor actinides (MA = Am, Cm). Among the rare earth elements there are the isotopes 144Ce, 147Pm, 151Sm, and 154,155Eu with half-lives of up to 93 years; decay of the nuclides will cause heating of the matrices with HLW. It has been shown that preliminary storage of the REE–MA matrix for ten years or more will significantly reduce the content of REE radioisotopes and their contribution to temperature increase in the geological repository. [ABSTRACT FROM AUTHOR]

Stone consolidants have been used in conservation practices for decades, with an increasingly interdisciplinary scientific attention to their composition and performance. This article is an ethnographic account of the process of testing a new consolidant's efficacy, drawn from fieldwork and interviews with scientists and heritage professionals involved in a European project in 2013. I illustrate, in line with prior scholarship on laboratory time, how time is a central tool of laboratory control, which must be managed to produce evidence of consolidant efficacy. Yet the 'fast time' of controlled experimental conditions is also suspect for those working in the field of heritage. By tracing the temporal tensions between scientific evidence making, laboratory practice and heritage practitioners' values, I illustrate that the project of materially fixing stone in time means intervening on heritage futures. [ABSTRACT FROM AUTHOR]

This article deals with stress wave decay performance, analysing the stress wave propagation generated by an impulsive unit load in a 2D representative unit cell (RUC) of a polymer composite with circular particles representing spherical particles, elliptical particles, and short fibres. The micro-scale numerical simulation uses explicit finite element analysis (FEA). The micro-response to an impulsive unit load creates a stress wave amplitude interacting with the material structure and tends to weaken and absorb energy. The stress wave damping is determined by the decaying amplitudes of Mises stress at the front of the stress wave. The stress wave damping is evaluated for different ratios of tensile modules and material densities of matrix and reinforcing material and other factors, such as percentage and particle size, applied to nine topologies of RUCs, and even the presence of an interfacial region is analysed. Moreover, the article visualises the phases of stress wave decay in various particle distributions, i.e., various topologies. Analysing the different topologies of the same particle volume (area) percentage, the study proved that the composite topology and resulting wave–particle and wave–wave interactions are other sources of material damping. The presence of even a small percentage, 3.5 area%, of reinforcing circular particles in the matrix brings a significant increase in stress wave damping up to about 40–43% (depending on the topology) compared to a homogeneous matrix with stress wave damping of 12.5% under the same conditions. Moreover, the topology with the same volume (area) percentage can increase particle stress wave damping by 15.3%. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Ecology & Rural Environment is the property of Journal of Ecology & Rural Environment Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

We consider the free boundary problem for a layer of incompressible fluid lying below the atmosphere and above a rigid bottom in the horizontally infinite setting. The fluid dynamics is governed by the incompressible Euler equations with damping and gravity, and the effect of surface tension is neglected on the upper free boundary. We prove the global well-posedness of the problem with the small initial data in both 2D and 3D. One of key ideas here is to make use of the time-weighted dissipation estimates to close the nonlinear energy estimates; in particular, this implies that the Lipschitz norm of the velocity is integrable-in-time, which is significantly different from that of viscous surface waves (Guo and Tice in Anal PDE 6(6):1429–1533, 2013; Wang in Adv Math 374:107330, 2020). [ABSTRACT FROM AUTHOR]

Woody biomass is a large carbon store in terrestrial ecosystems. In calculating biomass, tree stems are assumed to be solid structures. However, decomposer agents such as microbes and insects target stem heartwood, causing internal wood decay which is poorly quantified. We investigated internal stem damage across five sites in tropical Australia along a precipitation gradient. We estimated the amount of internal aboveground biomass damaged in living trees and measured four potential stem damage predictors: wood density, stem diameter, annual precipitation, and termite pressure (measured as termite damage in downed deadwood). Stem damage increased with increasing diameter, wood density, and termite pressure and decreased with increasing precipitation. High wood density stems sustained less damage in wet sites and more damage in dry sites, likely a result of shifting decomposer communities and their differing responses to changes in tree species and wood traits across sites. Incorporating stem damage reduced aboveground biomass estimates by > 30% in Australian savannas, compared to only 3% in rainforests. Accurate estimates of carbon storage across woody plant communities are critical for understanding the global carbon budget. Future biomass estimates should consider stem damage in concert with the effects of changes in decomposer communities and abiotic conditions.

Safety of using hydrogen as fuel in aerospace applications is closely connected with hydrogen explosion safety during its transportation and stockpiling at launch places. In this paper, preventing the detonation propagation in the mixtures of hydrogen with air due to accidental hydrogen releases is studied in numerical experiments. Another fuel - hydrocarbon propylene – is studied as an optional inhibitor to be added in a small volume quantity to hydrogen-air mixture. The dependence of detonation wave cellular structure on the content of inhibitor is studied for different fuel-air ratios. The results make it possible determining the content of inhibitor sufficient for preventing the detonation onset or destroying the existing detonation wave. • Preventing the detonation propagation in the mixtures of hydrogen with air is studied numerically. • Another fuel - hydrocarbon propylene – is studied as an optional inhibitor. • The dependence of detonation wave cellular structure on the content of inhibitor is studied for different fuel-air ratios. • The content of inhibitor sufficient for preventing the detonation onset or destroying the existing detonation wave. [ABSTRACT FROM AUTHOR]

In this paper, we considered a singular parabolic -Laplacian equation with logarithmic nonlinearity in a bounded domain with homogeneous Dirichlet boundary conditions. We established the local solvability by the technique of cut-off combining with the method of Faedo-Galerkin approximation. Based on the potential well method and Hardy-Sobolev inequality, the global existence of solutions was derived. In addition, we obtained the results of the decay. The blow-up phenomenon of solutions with different indicator ranges was also given. Moreover, we discussed the blow-up of solutions with arbitrary initial energy and the conditions of extinction.

PT ASA is a leather tanning company. Almost 65% of the company's assets are allocated for the procurement of raw leather, which consists of goat and sheepskin. In addition to being expensive, the availability of raw leather is also very limited. The company faces a trade-off where, on one hand, the raw material is easily decayed, but on the other hand, its availability is extremely limited, and if there is not enough inventory, the production process will be disrupted. In this research, a multi-objective optimization model is developed for controlling the inventory of raw leather using the Fuzzy Goal Programming approach. The objectives to be achieved are to minimize the total inventory cost, maximize the total quantity of raw leather that meets standards, and minimize the total cost of losses due to decayed raw leather. Based on the calculations, the fuzzy goal programming membership function value is obtained at 0.9155, with a total inventory cost over the planning horizon of IDR 10,341,630,000, a total of 1,279,542 sq ft of raw leather meeting standards, and a total loss cost due to decayed raw leather of IDR 142,911,691.

Aims Methods and results Conclusions Infections by the larval stage of the tape worms Echinococcus multilocularis and Echinococcus granulosus s.l. are potentially fatal zoonoses affecting humans as dead‐end hosts. Histopathological evaluation of hepatic echinococcosis is an integral part of patient management, including the distinction between alveolar (AE) and cystic echinococcosis (CE), which are associated with different disease courses and treatments. To improve histopathological assessment of Echinococcus lesions, we aimed to develop robust criteria to evaluate their viability and decay.Histomorphological criteria for determining parasitic viability based on the morphology of parasite structures and different stages of their decay were defined based on a clinically and molecularly defined cohort comprising 138 specimens from 112 patients (59 AE and 53 CE); 618 AE lesions were assessed for histopathological viability comparing haematoxylin and eosin (H&E) staining with mAbEm18 and mAbEm2G11 immunostaining. Moreover, parasite viability was systematically mapped in cross‐sections of five additional AE lesions. Protoscoleces in CE and AE displayed variable states of degeneration. Albendazole had no significant effect on the morphology of parasite structures. Viability assessment revealed high agreement between H&E and mAbEm18, but not mAbEm2G11 staining, suggesting mAbEm18 staining as reliable for parasite viability assessment. H&E and mAbEm18 staining displayed a central–peripheral gradient of parasite viability and decay across parasitic lesions, with decayed cystic lesions located more towards the lesion centre while the most viable cystic lesions were located more peripherally.Histopathological criteria corroborated by mAbEm18 staining provide a simple and reliable tool to assess the viability of AE lesions, knowledge of which is a valuable decision‐making tool for further treatment. [ABSTRACT FROM AUTHOR]

We study a class of damped p$$ p $$‐ biharmonic$$ biharmonic $$ type wave equation with homogeneous Dirichlet boundary condition. First of all, we prove the local existence of weak solutions by Galerkin method. Besides, when the energy level is low E(0)

In this paper, we study the Maxwell equations in the domain of outer-communication of the Schwarzschild black hole. We prove that if the middle components of the non-stationary solutions of the Maxwell equations verify a Morawetz-type estimate supported on a compact region in space around the trapped surface, then the components of the Maxwell fields decay uniformly in the entire exterior of the Schwarzschild black hole, including the event horizon. This is shown by making only use of Sobolev inequalities combined with energy estimates using the Maxwell equations directly. The proof does not pass through the scalar wave equation on the Schwarzschild black hole, does not need to decouple the middle components for the Maxwell fields, and would be in particular useful for the non-abelian case of the Yang–Mills equations where the decoupling of the middle components cannot occur. In fact, the estimates for the hereby argument are still valid for the Yang–Mills fields except for the Lie derivatives of the fields that are involved in the proof. [ABSTRACT FROM AUTHOR]

We study the global well-posedness and asymptotic behavior for a semilinear damped wave equation with Neumann boundary conditions, modeling a one-dimensional linearly elastic body interacting with a rigid substrate through an adhesive material. The key feature of of the problem is that the interplay between the nonlinear force and the boundary conditions allows for a continuous set of equilibrium points. We prove an exponential rate of convergence for the solution towards a (uniquely determined) equilibrium point. [ABSTRACT FROM AUTHOR]

The main goal of this study is to provide a platform for LCC calculation rules for timber buildings that comply with the Standards EN 16627:2015 and EN 15643-4, by employing a refined technical service life estimation. The database includes economic data for the building envelope and structural elements at the product level. In addition, the use phase of the building is included as maintenance, and the relevant economic data related to design failure, user preferences, and technical defects due to moisture. This model is under development as part of the WoodLCC project, with partners from Germany, Sweden, Norway, Estonia, Slovenia, and Austria, aiming to implement advanced methods to calculate accurate technical service life estimations and give the users the opportunity to evaluate the differences in building and maintenance costs based on different parameters. In this study, a data structure is created based on the necessary indicators and parameters for LCC calculation. An Excel model is developed, which will be used as a base for a software development in the WoodLCC project. Only wooden material is being considered for building envelope and bearing system. All material price data and installation times for each element is taken from a Norwegian dataset. This data is then modified for the selected European country using country specific labour cost- and material cost-indexes, convertible to the inquired currency. Inflation and escalation rates are considered for calculating the maintenance or repair that will occur in future. Material prices for different species and modification are included. Improved service life input data will enable more precise LCC for wood-based products, resulting in improved economic impact. LCC finds common acceptance only if reliable input data are available and complemented with knowledge about user expectations. We will evaluate the possibility of future improvements of such models. [ABSTRACT FROM AUTHOR]

The primary purpose of the study, as part of the planned conservation work, was to uncover all aspects of autochthonous biofilm pertaining to the formation of numerous deterioration symptoms occurring on the limestone Rožanec Mithraeum monument in Slovenia. Using state-of-the-art sequencing technologies combining mycobiome data with observations made via numerous light and spectroscopic (FTIR and Raman) microscopy analyses pointed out to epilithic lichen Gyalecta jenensis and its photobiont, carotenoid-rich Trentepohlia aurea, as the origin of salmon-hued pigmented alterations of limestone surface. Furthermore, the development of the main deterioration symptom on the monument, i.e., biopitting, was instigated by the formation of typical endolithic thalli and ascomata of representative Verrucariaceae family (Verrucaria sp.) in conjunction with the oxalic acid-mediated dissolution of limestone. The domination of lichenized fungi, as the main deterioration agents, both on the relief and surrounding limestone, was additionally supported by the high relative abundance of lichenized and symbiotroph groups in FUNGuild analysis. Obtained results not only upgraded knowledge of this frequently occurring but often overlooked group of extremophilic stone heritage deteriogens but also provided a necessary groundwork for the development of efficient biocontrol formulation applicable in situ for the preservation of similarly affected limestone monuments. [ABSTRACT FROM AUTHOR]

Summary: It has been proposed that ectomycorrhizal fungi can reduce decomposition while arbuscular mycorrhizal fungi may enhance it. These phenomena are known as the 'Gadgil effect' and 'priming effect', respectively. However, it is unclear which one predominates globally.We evaluated whether mycorrhizal fungi decrease or increase decomposition, and identified conditions that mediate this effect. We obtained decomposition data from 43 studies (97 trials) conducted in field or laboratory settings that controlled the access of mycorrhizal fungi to substrates colonized by saprotrophs.Across studies, mycorrhizal fungi promoted decomposition of different substrates by 6.7% overall by favoring the priming effect over the Gadgil effect. However, we observed significant variation among studies. The substrate C : N ratio and absolute latitude influenced the effect of mycorrhizal fungi on decomposition and contributed to the variation. Specifically, mycorrhizal fungi increased decomposition at low substrate C : N and absolute latitude, but there was no discernable effect at high values. Unexpectedly, the effect of mycorrhizal fungi was not influenced by the mycorrhizal type.Our findings challenge previous assumptions about the universality of the Gadgil effect but highlight the potential of mycorrhizal fungi to negatively influence soil carbon storage by promoting the priming effect. [ABSTRACT FROM AUTHOR]

Preventive maintenance through monitoring and early detection is important for trees that are structurally weak due to internal decay. Once internal decay has occurred, recovery of lost strength is irreversible. The decaying tree becomes vulnerable to external impacts, which may lead to breakage or windthrow. The Yoshino cherry (Cerasus×yedoensis (Matsum.) "Somei-yoshino") accounts for a high proportion of landscape trees in Asia. Testing the reliability of noninvasive sonic tomography (SoT) to estimate internal defects could facilitate structural stability evaluation and proactive preventive management. We performed noninvasive SoT and invasive resistance microdrilling to detect and quantify internal defects in old and large Yoshino cherry trees. Generally, SoT reflected the areas and location of severe structural defects, showing a correlation with the resistance microdrilling results (R² = 0.542, p < .001). However, when cracks were present in disks, the SoT overestimated defects and errors mainly observed in the transition zone (green). Based on these findings, when evaluating the SoT, careful decisions are needed to distinguish between actual defects and broad sonic shadows. Furthermore, additional evidence from drilling resistance is required to differentiate between incipient decay and cracks. The results of this study provide valuable insights for enhancing the interpretation of sonic tomograms. Study Implications : We suggest defect boundaries in sonic tomograms should be redefined to improve the accuracy of interpretation for any new species being studied. Careful drilling resistance measurements should be taken, especially in transition zones (green areas in tomogram) and incipient decay zone (light brown areas). Noninvasive sonic tomograms only reflect acoustic properties of the tested cross-section of a tree and cannot be considered an actual representation of the internal conditions until the readings are calibrated to destructive sampling results. [ABSTRACT FROM AUTHOR]

In the context of modernity, the growing disparity between our behaviors and ecological rhythms underscores the conflict between unsustainable lifestyles and the necessity for ecological harmony. Central to this exploration is the intricate tapestry of home design, woven with profound socio-political and economic consequences. This article embarks on a journey to unravel the multifaceted relationship, emphasising designers' responsibility to navigate the interplay of their designs with lasting effects. Contemporary existence diverges from the harmonious coexistence encapsulated by "oikos," straining against our genuine well-being aspirations. The marketplace, a stage where cultural aspirations and material desires converge, often creates illusory contentment, and perpetuates unsustainable cycles. Liberation from this intricate consumption web is daunting, given an economic paradigm that drifts from ecological balance. The home, symbolizing solace, finds itself entangled in material unsustainability, perpetually absorbing, producing, and consuming. Within this complex interplay, designers emerge as change agents, reshaping home design with a commitment to sustainability. Drawing parallels with Walter Benjamin's "Arcades Project," this article delves into history to underscore design's role in urban evolution and societal shifts by examining the power of interiority. The resounding message is clear: designers bear immense influence as architects of transformation, leading a new era of harmonious sustainability. [ABSTRACT FROM AUTHOR]

There is increasing concern into the decline of insect populations, with corresponding calls for conservation action aimed towards threatened species in particular. However, there is a distinct paucity of knowledge surrounding habitat requirements, microhabitat selection and conservation actions that may be undertaken for the vast majority of invertebrate species.Carabus intricatus (Coleoptera: Carabidae) Linnaeus, 1761 is a threatened ancient woodland specialist in the United Kingdom with a highly restricted distribution and is listed as a section 41 species of principal importance in England. Despite this, no empirical systematic evidence exists for even basic habitat requirements.Here, we used a patch‐occupancy modelling framework to determine occupancy and detection parameters for C. intricatus and a sympatric generalist species, C. problematicus, which is a potential competitor.Our models showed that decayed deadwood availability and leaf litter covering (an indicator of the availability of mature broadleaved trees) leads to higher occupancy of C. intricatus, whereas decayed dead wood availability and slug abundance are primary determinants of overall abundance. Additionally, detection models showed that higher humidity substantially increased activity of C. intricatus.For C. problematicus, ground moss coverage and overall deadwood volume most strongly influenced occupancy and abundance, whereas there were no humidity related influences on activity.The results support our general predictions about the specialist–generalist nature of the two species in the United Kingdom and indicate that key characteristics of old‐growth temperate rain forests, particularly the availability of deadwood and high humidity, are central to the conservation of these charismatic carabids. [ABSTRACT FROM AUTHOR]

This study evaluates the efficacy of the salts sodium metabisulfite (SMB), ammonium bicarbonate, sodium bicarbonate, and potassium dihydrogen orthophosphate first in vitro against the main postharvest fruit rot fungi, Alternaria alternata, Botrytis cinerea, Penicillium italicum, and Penicillium digitatum. Results showed that 0.2% SMB completely inhibited the mycelium growth of the fungal species. Ammonium bicarbonate and sodium bicarbonate were less effective at 0.2% in inhibiting mycelial growth, ranging from 57.6% to 77.6%. The least effective was potassium dihydrogen orthophosphate. Experiments were also performed in vivo on wounded apples inoculated with the most pathogenic fungus, B. cinerea, and treated with SMB at concentrations of 0.2, 0.5, 1, 2, and 3%, both preventively and curatively. Results based on the decay size showed that SMB, when used as a preventive treatment, had a reduced efficacy, even with the highest concentration. However, this salt proved to be very effective at 0.5% in curative treatment since the decay was completely blocked. Our results suggest that the appropriate concentration of SMB for post-harvest treatment is 0.5% as a curative treatment. On the other hand, the 1% dose induced the onset of phytotoxicity around the wound. To assess the extent of the phytotoxicity reaction, higher concentrations of 1–4% SMB were applied to wounded fruit. Apples and oranges were inoculated or not with B. cinerea and P. digitatum, respectively. Doses of 1–4% induced phytotoxicity in the form of a discolored ring surrounding the wound on the epidermis of the fruit; this phytotoxicity enlarged as the concentration of SMB increased. The phytotoxic features were similar on apples and oranges. The methodological procedure made it possible to carry out a quantitative assessment of SMB phytotoxicity. This method is proposed as an easy-to-use technique for quantitatively estimating the phytotoxicity of antifungal compounds on post-harvest fruit. [ABSTRACT FROM AUTHOR]

Muscadine grapes (Vitis rotundifolia Michx.) are delicate in nature with short shelf life. Postharvest technologies like modified atmosphere packaging (MAP) with reduced oxygen (O2) and elevated carbon dioxide (CO2) could increase the postharvest storage life with better quality. In the current experiment, physical and biochemical quality attributes of black and bronze cultivars of muscadine grapes ('Supreme' and 'Granny Val', respectively) were evaluated in active MAP. Fruit were packed in plastic trays, sealed with impermeable film, and CO2 was introduced into the package. The MAP was created by a rigid microperforated plastic patch coated with a proprietary semipermeable resin, which was applied over a hole in the tray; packages with the same size hole without a patch were the control. Fruit were stored at 4°C for 42 days (6 weeks). MAP resulted in significantly lower decay incidence and better retention of fruit firmness for up to 28 days of storage in both cultivars as well as reducing color changes in 'Supreme' fruit. Although MAP did not affect the biochemical quality of muscadine grapes, total antioxidants increased initially and then decreased during storage, irrespective of packaging treatments. A significant linear increase in total phenolic content was also found during storage, regardless of treatments applied. Overall, the results of the current study demonstrate that MAP can be an affective technology to increase storage duration of muscadines with better retention of physical quality, without affecting the biochemical attributes. [ABSTRACT FROM AUTHOR]

We tested the hypothesis that the loss of load-bearing capacity, as estimated by means of static load tests and from sonic tomography, is comparable. This is of practical importance for arborists when they have to assess results reported by different consultants or when they have to choose between applying one of these two methods in a specific case. A total of 59 trees, primarily Fagus sylvatica and Quercus robur, were subjected to static load tests and sonic tomography. The pulling test method yielded the residual stiffness of the stem at every position tested with a strain sensor as an intermediate quality parameter used to merely validate the actual estimations of safety against fracture. Based on the shape of the parts of the stem cross-section that are considered load bearing, sonic tomograms can be further processed in order to assess the loss of load-bearing capacity from defects like decay. We analyzed the correlation of these biomechanically equivalent parameters. This was only the case to a very limited extent. Sonic tomography and static load tests cannot replace each other, but they can complement each other. [ABSTRACT FROM AUTHOR]

Open-field-grown tomatoes in Saudi Arabia are stressed by poor soil fertility because of the low organic matter content, low nutrient availability, and high pH. Thus, high chemical fertilizer inputs are crucial for commercial production; however, they cause economic loss as well as negatively affect environmental sustainability. The use of efficient organic fertilizers would be useful for developing more cost-effective, environmentally friendly, and sustainable agriculture. The current study evaluated the impact of Black soldier fly (Hermetia illucens L.) frass (BSFF) fertilizer applications as organic fertilizer on postharvest fruit quality and shelf life of open-field-grown F1 hybrid ‘Sinag Tala’ tomatoes compared with those grown under control treatment (received recommended doses of chemical fertilizers for tomato production under open field conditions). The experiment was conducted using a randomized complete block design with four replicates. The results showed that the application of BSFF fertilizer, especially at the higher rate (5 ton/ha; BSFF3), improved the overall quality of tomato fruit. The BSFF fertilizer treatments reduced weight loss, maintained higher firmness, antioxidants [vitamin C, total phenol content (TPC) and total flavinoid (TFC)], total soluble solids (TSS), and titratable acidity (TA) contents, and lowered the TSS/TA ratio of fruits during shelf life compared with those of the control. The decay incidence was only detected after 9 days of shelf life and was significantly lower in all the BSFF fertilizer treatments (range, 8.40%-12.05%) than in the control (15.9%). In addition, BSFF fertilizer treatments reduced both disease incidence and severity of gray mold following pathogen inoculation during shelf life compared with those of the control. These results might be attributable to the higher antioxidants content (vitamin C, TPC, and TFC) and higher polyphenol oxidase activity in BSFF-fertilized tomatoes. In conclusion, BSFF fertilizer could be used as a potential eco-friendly alternative to chemical fertilizers to improve tomato fruit quality during shelf life.

This paper presents the Sumudu transform method and its hybrid for the construction of solutions of differential equations, both with integer-order and fractional derivatives. The paper discusses the construction of solutions of fractional differential equations with varying delay proportional to the independent variable by using two methods. The paper considers the mathematical model for the decay of Iodine 135 as an application of fractional differential equations in nuclear physics. The application indicates that fractional differential equations with variable delay proportional to the independent variable are a useful tool for the modeling of many anomalous phenomena in nature and in the theory of complex systems.

Biological durability remains an understudied area of mass timber construction, despite expert warnings on potential moisture and decay issues that may affect building performance. In an effort to bridge the knowledge gap, this article presents experimental data on the performance of fungal-decayed cross laminated timber (CLT) connection assemblies. A total of 560 connection assemblies were made using select CLT species from major global markets. These were mechanically tested following inoculation by two brown rot fungi for a total period of 78 weeks, with the connections periodically harvested after 10, 20, 30, 40, 52, and 78 weeks. The data from the mechanical tests, which included cyclic evaluation using an abbreviated CUREE loading protocol and dowel bearing strength tests performed in accordance with ASTM D5764, are submitted in this repository. The repository also contains information on mass changes to connection assemblies as decay progressed and SAWS model parameters that were calibrated using the raw data generated from the universal testing machine (UTM) during cyclic tests of the connection assemblies. This work is fundamental for accurate assessment of fungal deterioration in mass timber buildings and the data submitted herein could be used by researchers and scientists to model behavior of connections in mass timber buildings, especially in humid and damp regions with high chances of biodeterioration.

The authors draw on the sociological theories of the "liability of newness" and the "liability of adolescence" to generate new insights into relationship evolution. First, they show how a new relationship in its "honeymoon" phase exhibits a unique constellation of two conditions, namely information asymmetry and forbearance. Next, they explain how a relationship evolves along two processes that involve passive learning and decay, respectively. In themselves, these processes will move a relationship toward a long-term "transactional" state and possibly termination, but the processes can also be actively shaped using various governance mechanisms. Doing so, however, requires a nuanced account of types of governance mechanisms and the particular conditions they are intended to induce. The authors consider how the general mechanisms of (1) incentives and (2) information sharing can be deployed in standardized or customized fashions, respectively. Next, they suggest how different manifestation of governance mechanisms impact a relationship's underlying evolutionary processes and evolved relationship states. In general, their framework represents a new perspective on relationship evolution—one that involves the purposeful management of initial conditions and their related evolutionary processes. [ABSTRACT FROM AUTHOR]

Abstract The COVID-19 pandemic has provided valuable lessons that deserve deep thought to prepare for the future. The decay pattern of surface contamination by SARS-CoV-2 RNA in the residences of COVID-19 patients is important but still unknown. We collected 2,233 surface samples from 21 categories of objects in 141 residences of COVID-19 patients in Shanghai when attacked by the omicron variant in spring 2022. Several characteristics of the patients and their residences were investigated to identify relevant associations. The decay of contamination was explored to determine the persistence. Approximately 8.7% of the surface samples were tested positive for SARS-CoV-2 RNA. The basin, water tap, and sewer inlet had the highest positive rates, all exceeding 20%. Only time was significantly associated with the level of surface contamination with SARS-CoV-2, showing a negative association. The decrease fit a first-order decay model with a decay rate of 0.77 ± 0.07 day−1, suggesting a 90% reduction in three days. Positive associations between the cumulative number of newly diagnosed patients in the same building and the positive rate of SARS-CoV-2 RNA in the public corridor were significant during the three days. Our results, in conjunction with the likely lower infectivity or viability, demonstrate that fomite transmission played a limited role in COVID-19 spread. The time determined SARS-CoV-2 RNA contamination, which was reduced by three days. This study is the first to show the decay patterns of SARS-CoV-2 contamination in real residential environments, providing insight into the patterns of transmission, as well as community-based prevention and control of similar threats.

Wood can be a suitable alternative to energy-intensive materials in various applications. Nevertheless, its susceptibility to weathering and decay has significantly hindered the broad adoption of the most commercially significant wood species. While current solutions do tackle certain challenges, they often come with disadvantages like high costs, environmental risks, and/or inefficiencies. Nanotechnology-based methods can be employed to mitigate these weaknesses and create durable, sustainable wood materials. In this review, we delve into cutting-edge advancements in the development of biodeterioration-resistant wood through innovative nanotechnology approaches. These methods usually involve the application of nanomaterials, either possessing biocidal properties or serving as carriers for biocides. We systematically describe these approaches and compare them to conventional wood modification methods. Additionally, this review provides a brief overview of the prevalent biodeteriorating organisms and their mechanisms of action, which notably impact the development and choice of a suitable strategy for wood modification/treatment. Given the requirements of biodeteriorating organisms for growth and wood degradation, it is expected that the new nanotechnology-based approaches to enhance wood durability may provide innovative broad-spectrum biocidal nanosystems. These systems can simultaneously induce alterations in the physicochemical properties of wood, thereby constraining the availability of the growth requirements. These alterations can efficiently inhibit the biodeterioration process by decreasing water absorption, restricting access to the wood components, and reducing void spaces within the wood structure. Finally, this review highlights the new opportunities, challenges, and perspectives of nanotechnology methods for biodeterioration-resistant wood, through which some techno-economic, environmental and safety aspects associated with these methods are addressed.

As the U.S. military became embroiled in "jungle warfare" across the Pacific during World War II, it was caught off guard by the rapid deterioration of materials and equipment in the tropics, where the air was hot, humid, and teeming with fungal spores. This article tells the story of how American scientists and engineers understood the "tropical deterioration" of portable radios and electronics and developed techniques to counteract it. Examining scientific efforts to prevent tropical decay reveals how exposure to tropical conditions during World War II shaped the development of portable electronics. Contributing to envirotech history and environmental media studies, this article uncovers the importance of climate proofing to the history of electronics miniaturization. Tropical deterioration, furthermore, provides a technology-focused lens for enriching our historical understanding of the tropics as an environmental imaginary. [ABSTRACT FROM AUTHOR]

Copyright of Nativa is the property of Revista Nativa and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The COVID-19 pandemic has provided valuable lessons that deserve deep thought to prepare for the future. The decay pattern of surface contamination by SARS-CoV-2 RNA in the residences of COVID-19 patients is important but still unknown. We collected 2,233 surface samples from 21 categories of objects in 141 residences of COVID-19 patients in Shanghai when attacked by the omicron variant in spring 2022. Several characteristics of the patients and their residences were investigated to identify relevant associations. The decay of contamination was explored to determine the persistence. Approximately 8.7% of the surface samples were tested positive for SARS-CoV-2 RNA. The basin, water tap, and sewer inlet had the highest positive rates, all exceeding 20%. Only time was significantly associated with the level of surface contamination with SARS-CoV-2, showing a negative association. The decrease fit a first-order decay model with a decay rate of 0.77 ± 0.07 day−1, suggesting a 90% reduction in three days. Positive associations between the cumulative number of newly diagnosed patients in the same building and the positive rate of SARS-CoV-2 RNA in the public corridor were significant during the three days. Our results, in conjunction with the likely lower infectivity or viability, demonstrate that fomite transmission played a limited role in COVID-19 spread. The time determined SARS-CoV-2 RNA contamination, which was reduced by three days. This study is the first to show the decay patterns of SARS-CoV-2 contamination in real residential environments, providing insight into the patterns of transmission, as well as community-based prevention and control of similar threats. [ABSTRACT FROM AUTHOR]