Search

Porous coordination polymers (PCPs) are an excellent class of porous crystalline materials with tunable properties and intriguing potential applications spanning multiple disciplines. In this work, we report the synthesis and characterization of a PCP (HI-103) based on 4,4'-dithiodibenzoic acid ligand and zinc nitrate with two DMF molecules residing in the porous network. The stability of the porous network was analyzed by heating the compound at 60.0 °C for two days, and the structural analysis revealed a new PCP (HI-104) was formed with one of the DMF molecules, indicating a single-crystal to single-crystal (SCSC) transformation. The solvent molecules were completely removed by extensive drying (HI-103-dry), and the integrity of the porous network was verified by powder X-ray diffraction (PXRD) and thermogravimetric analysis. The reversibility of SCSC transformation was confirmed by treating HI-103-dry with DMF molecules, resulting in HI-103 after five days. The adsorption studies of HI-103-dry with other solvents revealed that SCSC transformation was not observed for DMA and DEA, but some structural changes were observed in the presence of DMSO. The adsorption studies performed in the presence of an equimolar mixture of DMF, DMA, and DMA indicated that HI-103-dry could selectively adsorb DMF molecules from the analogous mixture., (© 2024 Wiley-VCH GmbH.)

The physical characteristics of a supramolecular gel are greatly influenced by the nature and arrangement of functional groups in the gelator. This work focuses on the impact of the functional groups, specifically the hydroxyl group, on the stimuli-responsive properties of a gel. We used a C 3 -symmetric benzene-1,3,5-tricarboxamide (BTA) platform, which was attached to the methyl ester of phenylalanine (MPBTA) and tyrosine (MTBTA). The gelation studies revealed that MPBTA gelled in alcohols, non-polar aromatic solvents, and aqueous mixtures (1:1, v / v ) of high-polar solvents, whereas MTBTA gelled only in an aqueous mixture of DMF (1:1, v / v ). The mechanical and thermal strength of the gels were evaluated by rheological and T gel studies, and the results indicated that MPBTA gels were stronger than MTBTA gels. The gels were characterized by powder X-ray diffraction and scanning electron microscopy (SEM). The analysis of stimuli-responsive properties revealed that MPBTA gels were intact in the presence of sodium/potassium salts, but the MTBTA gel network was disrupted. These results indicate that the elegant choice of functional groups could be used to tune the constructive or destructive stimuli-responsive behavior of gels. This study highlights the significant role of functional groups in modulating the stimuli-responsive properties of supramolecular gels.

Understanding the key parameters that control the self-assembly process is critical to predict self-assembly modes in multi-component systems, which will lead to the development of nanofibrous materials with tuneable properties. Enantiomeric amino acid-based low-molecular-weight gelators (LMWGs) were mixed in polar (polar protic) and aromatic apolar (aromatic) solvents and compared to their individual counterparts to probe the effect of solvent polarity on the self-assembly process. Scanning electron microscopy (SEM) reveals that xerogels of individual components display hollow needles in polar protic solvents, while chiral coils are observed in aromatic solvents. In contrast, the multi-component gel displays hollow needle morphologies in both solvents, indicating similar morphologies in polar protic solvents but an entirely different nanostructure for the individual gel networks in aromatic solvents. PXRD experiments performed on the dried gels showed that the nature of the solvents plays a vital role in the co-assembly process of multi-component gels. The self-assembly modes and the gel state structure of the gels are analysed by wide-angle X-ray diffraction (WAXS) and small-angle neutron diffraction (SANS), which reveals that the mixed gel undergoes different co-assembly modes depending on the nature of the solvent systems. This study shows that different co-assembly modes can be achieved for structurally similar components by varying the solvent polarity, demonstrating the importance of solvent choice in the self-assembly process of multi-component gels.

We modified C 3 -symmetric benzene-1,3,5- tris -amide (BTA) by introducing flexible linkers in order to generate an N-centered BTA (N-BTA) molecule. The N-BTA compound formed gels in alcohols and aqueous mixtures of high-polar solvents. Rheological studies showed that the DMSO/water (1:1, v / v ) gels were mechanically stronger compared to other gels, and a similar trend was observed for thermal stability. Powder X-ray analysis of the xerogel obtained from various aqueous gels revealed that the packing modes of the gelators in these systems were similar. The stimuli-responsive properties of the N-BTA towards sodium/potassium salts indicated that the gel network collapsed in the presence of more nucleophilic anions such as cyanide, fluoride, and chloride salts at the MGC, but the gel network was intact when in contact with nitrate, sulphate, acetate, bromide, and iodide salts, indicating the anion-responsive properties of N-BTA gels. Anion-induced gel formation was observed for less nucleophilic anions below the MGC of N-BTA. The ability of N-BTA gels to act as an adsorbent for hazardous anionic and cationic dyes in water was evaluated. The results indicated that the ethanolic gels of N-BTA successfully absorbed methylene blue and methyl orange dyes from water. This work demonstrates the potential of the N-BTA gelator to act as a stimuli-responsive material and a promising candidate for water purification.

Two polarizing agents from the AsymPol family, AsymPol-TEK and cAsymPol-TEK (methyl-free version) are introduced for MAS-DNP applications in non-aqueous solvents. The performance of these new biradicals is rationalized in detail using a combination of electron paramagnetic resonance spectroscopy, density functional theory, molecular dynamics and quantitative MAS-DNP spin dynamics simulations. By slightly modifying the experimental protocol to keep the sample temperature low at insertion, we are able to obtain reproducable DNP-NMR data with 1,1,2,2-tetrachloroethane (TCE) at 100 K, which facilitates optimization and comparison of different polarizing agents. At intermediate magnetic fields, AsymPol-TEK and cAsymPol-TEK provide 1.5 to 3-fold improvement in sensitivity compared to TEKPol, one of the most widely used polarizing agents for organic solvents, with significantly shorter DNP build-up times of ∼1 s and ∼2 s at 9.4 and 14.1 T respectively. In the course of the work, we also isolated and characterized two diastereoisomers that can form during the synthesis of AsymPol-TEK; their difference in performance is described and discussed. Finally, the advantages of the AsymPol-TEKs are demonstrated by recording 2D 13 C- 13 C correlation experiments at natural 13 C-abundance of proton-dense microcrystals and by polarizing the surface of ZnO nanocrystals (NCs) coated with diphenyl phosphate ligands. For those experiments, cAsymPol-TEK yielded a three-fold increase in sensitivity compared to TEKPol, corresponding to a nine-fold time saving.

We have analyzed the nature and role of functional groups on the self-assembly modes and the physical properties of multicomponent gels with structurally similar individual components. The gelation properties of individual and mixed enantiomeric compounds of biphenyl bis-(amides) of alanine (BPA) or phenylalanine (BPP) methyl ester were analyzed in various solvent/solvent mixtures. Multicomponent gels were formed by mixing the enantiomeric BPP compounds at a lower concentration, but a higher concentration was required for mixed alanine-based BPA gels. The comparison of the mechanical strength of the individual and mixed BPP compounds indicated that the mixed BPP gels displayed enhanced mechanical strength (∼2-fold increase) in p-xylene, but a weaker gel was observed in DMSO/water. However, a reverse trend was observed for BPA gels, indicating the role of functional groups in the gel network formation. X-ray diffraction analysis of the gelator and the xerogels in the solid state confirmed the formation of co-assembled networks in mixed enantiomeric gels. The stability of the gels towards anions was evaluated by analyzing the anion induced stimuli-responsive properties. These results indicate the effective modeling of the functional groups of the individual components could lead to multicomponent gels with tunable properties., (© 2023 Wiley-VCH GmbH.)

The nature of functional groups and their relative position and orientation play an important role in tuning the gelation properties of stimuli-responsive supramolecular gels. In this work, we synthesized and characterized mono-/bis-pyridyl- N -oxide compounds of N -(4-pyridyl)nicotinamide ( L 1 - L 3 ). The gelation properties of these N -oxide compounds were compared with the reported isomeric counterpart mono-/bis-pyridyl- N -oxide compounds of N -(4-pyridyl)isonicotinamide. Hydrogels obtained with L 1 and L 3 were thermally and mechanically more stable than the corresponding isomeric counterparts. The surface morphology of the xerogels of di- N -oxides ( L 3 and diNO ) obtained from the water was studied using scanning electron microscopy (SEM), which revealed that the relative position of N -oxide moieties did not have a prominent effect on the gel morphology. The solid-state structural analysis was performed using single-crystal X-ray diffraction to understand the key mechanism in gel formation. The versatile nature of N -oxide moieties makes these gels highly responsive toward an external stimulus, and the stimuli-responsive behavior of the gels in water and aqueous mixtures was studied in the presence of various salts. We studied the effect of various salts on the gelation behavior of the hydrogels, and the results indicated that the salts could induce gelation in L 1 and L 3 below the minimum gelator concentration of the gelators. The mechanical properties were evaluated by rheological experiments, indicating that the modified compounds displayed enhanced gel strength in most cases. Interestingly, cadmium chloride formed supergelator at a very low concentration (0.7 wt% of L 3 ), and robust hydrogels were obtained at higher concentrations of L 3 . These results show that the relative position of N -oxide moieties is crucial for the effective interaction of the gelator with salts/ions resulting in LMWGs with tunable properties.

The synthesis of catalytically active metal-organic frameworks (MOFs) with copper(II) paddle-wheel clusters and urea-carboxylate linkers was achieved at room temperature in the presence of sulphate anions. The role of various anions in determining the MOF structure was analysed using X-ray diffraction. Structural analysis of the MOFs indicated that a two-fold interpenetrated rhombus grid (HI-101) was formed in the presence of sulphate anions, but a three-fold interpenetrated square grid network (HI-102) was obtained with nitrate and perchlorate anions. The experiment performed with various anions in the presence of sulphate anions also resulted in the formation of HI-101, indicating the selectivity of sulphate anions in the formation of the HI-101 framework. HI-101 proved to be an efficient catalyst for the cycloaddition of CO 2 at room temperature, the oxidation of primary alcohols to aldehydes and the methanolysis of epoxides, but the other MOFs were not catalytically active. Thus, the size, charge and affinity of sulphate anions play an important role in generating a two-fold interpenetrated rhombus grid, which is crucial for catalytic reactions. This study shows that anion-templated synthesis could generate a versatile urea-based MOF catalyst for CO 2 fixation and other reactions.

Organotin complexes are studied as promising alternatives to the anticancer drug cisplatin. We report two monoorganotin(IV) complexes based on a dibenzyl phosphinoyldithioformate (H-DBPTF) ligand, containing either bromide (Sn-DBPTF-1) or chloride (Sn-DBPTF-2) anions. The complexes were characterized by standard analytical techniques and the structural details of these complexes were elucidated by single crystal X-ray diffraction. Sn-DBPTF-1 was cytotoxic at IC 50 <10 μg mL -1 against cancer cell lines A549 (lung cancer), Aspc-1 (pancreatic cancer), OVCAR-3 (ovarian cancer), T-47D (breast cancer) and HCT116 (colon cancer), and breast epithelial stem cell line D492. The non-tumorigenic breast epithelial cell line MCF-10 was less sensitive at IC 50 = 22 μg mL -1 . Sn-DBPTF-2 had limited cytotoxic effect at IC 50 13-37 μg mL -1 . Sn-DBPTF-1 induced apoptosis and double-strand DNA breaks. Cell cycle arrest in G2 occurred in HCT116 and accumulation in G1 in Aspc-1. The results indicate that the basic effect of Sn-DBPTF-1 is to induce DNA damage, leading to apoptosis and cell cycle arrest depending on the cell line.

Efficiently hyperpolarizing proton-dense molecular solids through dynamic nuclear polarization (DNP) solid-state NMR is still an unmet challenge. Polarizing agents (PAs) developed so far do not perform well on proton-rich systems, such as organic microcrystals and biomolecular assemblies. Herein we introduce a new PA, cAsymPol-POK, and report outstanding hyperpolarization efficiency on 12.76 kDa U- 13 C, 15 N-labeled LecA protein and pharmaceutical drugs at high magnetic fields (up to 18.8 T) and fast magic angle spinning (MAS) frequencies (up to 40 kHz). The performance of cAsymPol-POK is rationalized by MAS-DNP simulations combined with electron paramagnetic resonance (EPR), density functional theory (DFT) and molecular dynamics (MD). This work shows that this new biradical is compatible with challenging biomolecular applications and unlocks the rapid acquisition of 13 C- 13 C and 15 N- 13 C correlations of pharmaceutical drugs at natural isotopic abundance, which are key experiments for structure determination., (© 2022 Wiley-VCH GmbH.)

We report the asymmetric synthesis of homochiral metal-organic materials (MOMs) in chiral gels from achiral components. The enantioselectivity of MOMs depends on the chirality of the gel, whereas the synthesis performed in solution phase and achiral gels resulted in conglomerates., (© 2021 Wiley-VCH GmbH.)

The structural modification of existing supramolecular architecture is an efficient strategy to design and synthesize supramolecular gels with tunable and predictable properties. In this work, we have modified bis(pyridyl urea) compounds with different linkers, namely hexylene and butylene, to their corresponding bis(pyridyl- N -oxide urea). The gelation properties of both the parent and the modified compounds were studied, and the results indicated that modification of the 3-pyridyl moieties to the corresponding 3-pyridyl- N -oxides induced hydrogelation. The stability of the parent and modified compounds were evaluated by sol-gel transition temperature ( T gel ) and rheological measurements, and single-crystal X-ray diffraction was used to analyze the solid-state interactions of the gelators. The morphologies of the dried gels were analyzed by scanning electron microscopy (SEM), which revealed that the structural modification did not induce any prominent effect on the gel morphology. The stimuli-responsive behavior of these gels in the presence of salts in DMSO/water was evaluated by rheological experiments, which indicated that the modified compounds displayed enhanced gel strength in most cases. However, the gel network collapsed in the presence of the chloride salts of aluminum(III), zinc(II), copper(II), and cadmium(II). The mechanical strength of the parent gels decreased in the presence of salts, indicating that the structural modification resulted in robust gels in most cases. The modified compounds formed gels below minimum gel concentration in the presence of various salts, indicating salt-induced gelation. These results show the making and breaking ability of the gel network in the presence of external stimuli (salts), which explains the potential of using LMWGs based on N -oxide moieties as stimuli-responsive materials.

Catalysts based on cobalt amino acids and 2,2 bipyridine (bipy) present an attractive and cost-effective alternative as ring opening polymerization catalysts, yet this system remains underexplored despite the advantageous coordination properties of amino acids and bipy as ligands combined with the variety of accessible oxidation states and coordination geometries of cobalt. Here, metal complexes of type [Co(aa) 2 (bipy)] with amino acids (aa: glycine, leucine and threonine) as ligands are reported. The complexes were characterized spectroscopically (IR, UV-vis and 1 H, 13 C NMR for diamagnetic species), and by MS spectrometry and elemental analysis. The data reveal that the 2,2 bipyridine acts as a neutral bidentate donor coordinating to the metal ion through two nitrogen atoms and the amino acid acts as a bidentate ligand coordinating through the carboxylate and amino group forming a stable five membered ring and a pseudo -octahedral geometry around the Co center. The activity of the complexes for the ring opening polymerization (ROP) of rac -lactide is presented. The complexes are effective initiators for the ROP of rac -lactide ( K obs = 9.05 × 10 -4 s -1 ) at 100 : 1 [ rac -lactide] : [catalyst] 1 M overall concentration of lactide in toluene at 403 K., Competing Interests: The authors have no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

The role of specific interactions in the self-assembly process of low molecular weight gelators (LMWGs) was studied by altering the nonbonding interactions responsible for gel formation via structural modification of the gelator/nongelator. This was achieved by modifying pyridyl moieties of bis(pyridyl) urea-based hydrogelator ( 4-BPU ) and the isomer ( 3-BPU ) to pyridyl N -oxide compounds ( L 1 and L 2 , respectively). The modification of the functional groups resulted in the tuning of the gelation properties of the parent gelator, which induced/enhanced the gelation properties. The modified compounds displayed better mechanical and thermal stabilities and the introduction of the N -oxide moieties had a prominent effect on the morphologies of the gel network, which was evident from the scanning electron microscopy (SEM) images. The effect of various interactions due to the introduction of N -oxide moieties in the gel network formation was analyzed by comparing the solid-state interactions of the compounds using single crystal X-ray diffraction and computational studies, which were correlated with the enhanced gelation properties. This study shows the importance of specific nonbonding interactions and the spatial arrangement of the functional groups in the supramolecular gel network formation.

Removal of cyanide as nontoxic thiocyanate under physiological conditions may serve as a catalytic detoxification route in vivo . Aqueous catalytic reaction conditions were explored where at the conditions employed the reaction proceeded to exhaustion in 1 h. The complex, syn -[Mo 2 O 2 (μ-S) 2 (S 2 )(DMF) 3 ] 1 , participates in a ligand exchange reaction of the dimethylformamide ligands and cyanide. Simultaneous sulfur abstraction reaction from the terminal disulfide group forms thiocyanate and terminal sulfido ligand. Respective reaction rates for the two reactions appear competitive where different products were isolated solely based on change of reaction temperature. The approach to determine the number of cyanide ligands participating in the ligand exchange reaction by varying the stoichiometry and reaction temperature led to identification and isolation of tetranuclear complexes 2 and 5 and dinuclear complexes 3 , 4 , and 6 . A synthesized and fully characterized thiocyanate analog of 6 ( 7 ) supports spectroscopic characterization of 6 . The tetranuclear anion, [Mo 4 O 4 (μ-S) 6 (CN) 4 ] 4- , 2 , was crystallized from a reaction at ambient temperature. The dinuclear anion, [Mo 2 O 2 (μ-S) 2 (S)(CN) 3 ] 3- , 3 , was crystallized from similar reaction conditions at lower temperature. The reaction yield of thiocyanate obtained at pH of 7.4 and at 9.2 as a function of time, for several ratios of cyanide, favors the sulfur abstraction reaction at elevated pH. The sulfur abstraction reaction is the first step in a proposed mechanism of the reaction of cyanide and thiosulfate to form thiocyanate and sulfite by 1 .

The factors affecting the self-assembly process in low molecular weight gelators (LMWGs) were investigated by tuning the gelation properties of a well-known gelator N -(4-pyridyl)isonicotinamide ( 4PINA ). The N-H∙∙∙N interactions responsible for gel formation in 4PINA were disrupted by altering the functional groups of 4PINA , which was achieved by modifying pyridyl moieties of the gelator to pyridyl N -oxides. We synthesized two mono- N -oxides ( INO and PNO ) and a di- N -oxide ( diNO ) and the gelation studies revealed selective gelation of diNO in water, but the two mono- N -oxides formed crystals. The mechanical strength and thermal stabilities of the gelators were evaluated by rheology and transition temperature ( T gel ) experiments, respectively, and the analysis of the gel strength indicated that diNO formed weak gels compared to 4PINA . The SEM image of diNO xerogels showed fibrous microcrystalline networks compared to the efficient fibrous morphology in 4PINA . Single-crystal X-ray analysis of diNO gelator revealed that a hydrogen-bonded dimer interacts with adjacent dimers via C-H∙∙∙O interactions. The non-gelator with similar dimers interacted via C-H∙∙∙N interaction, which indicates the importance of specific non-bonding interactions in the formation of the gel network. The solvated forms of mono- N -oxides support the fact that these compounds prefer crystalline state rather than gelation due to the increased hydrophilic interactions. The reduced gelation ability (minimum gel concentration (MGC)) and thermal strength of diNO may be attributed to the weak intermolecular C-H∙∙∙O interaction compared to the strong and unidirectional N-H∙∙∙N interactions in 4PINA .

Mixing supramolecular gels based on enantiomers leads to re-arrangement of gel fibers at the molecular level, which results in more favorable packing and tunable properties. Bis(urea) compounds tagged with a phenylalanine methyl ester in racemic and enantiopure forms were synthesized. Both enantiopure and racemate compounds formed gels in a wide range of solvents and the racemate (1-rac) formed a stronger gel network compared with the enantiomers. The gel (1R+1S) obtained by mixing equimolar amount of enantiomers (1R and 1S) showed enhanced mechanical and thermal stability compared to enantiomers and racemate gels. The preservation of chirality in these compounds was analyzed by circular dichroism and optical rotation measurements. Analysis of the scanning electron microscopy (SEM) and atomic force microscopy (AFM) images revealed that the network in the mixed gel is a combination of enantiomers and racemate fibers, which was further supported by solid-state NMR. The analysis of the packing in xerogels by solid-state NMR spectra and the existence of twisted-tape morphology in SEM and AFM images confirmed the presence of both self-sorted and co-assembled fibers in mixed gel. The enhanced thermal and mechanical strength may be attributed to the enhanced intermolecular forces between the racemate and the enantiomer and the combination of both self-sorted and co-assembled enantiomers in the mixed gel.

We present first experiments on electron beam induced deposition of silacyclohexane (SCH) and dichlorosilacyclohexane (DCSCH) under a focused high-energy electron beam (FEBID). We compare the deposition dynamics observed when growing pillars of high aspect ratio from these compounds and we compare the proximity effect observed for these compounds. The two precursors show similar behaviour with regards to fragmentation through dissociative ionization in the gas phase under single-collision conditions. However, while DCSCH shows appreciable cross sections with regards to dissociative electron attachment, SCH is inert with respect to this process. We discuss our deposition experiments in context of the efficiency of these different electron-induced fragmentation processes. With regards to the deposition dynamics, we observe a substantially faster growth from DCSCH and a higher saturation diameter when growing pillars with high aspect ratio. However, both compounds show similar behaviour with regards to the proximity effect. With regards to the composition of the deposits, we observe that the C/Si ratio is similar for both compounds and in both cases close to the initial molecular stoichiometry. The oxygen content in the DCSCH deposits is about double that of the SCH deposits. Only marginal chlorine is observed in the deposits of from DCSCH. We discuss these observations in context of potential approaches for Si deposition.

We report the synthesis of a bis(urea) gelator designed to specifically mimic the chemical structure of the highly polymorphic drug substance ROY. Crystallization of ROY from toluene gels of this gelator results in the formation of the metastable red form instead of the thermodynamic yellow polymorph. In contrast, all other gels and solution control experiments give the yellow form. Conformational and crystal structure prediction methods have been used to propose the structure of the gel and show that the templation of the red form by the targeted gel results from conformational matching of the gelator to the ROY substrate coupled with overgrowth of ROY onto the local periodic structure of the gel fibres.

Appending perfluoroalkyl substituents to bis(urea) gelators results in significantly decreased inter-chain interactions with markedly thinner fibres and hence more cross-linked and more transparent gels with potential applications in the crystallisation of fluorinated pharmaceuticals. Gel structure has been probed by detailed SANS measurements which indicate a surprising structure evolution on thermal cycling, not seen for hydrocarbon analogues. The SANS data are complemented by the single crystal X-ray structure of one fluorinated gelator.