Search

The research on the hot corrosion resistance of nickel-based superalloys is critical to determining and enhancing their service life. Therefore, this study investigates the cyclic hot corrosion behavior of GH4738 alloy coated with a mixed salt (75 wt% Na2SO4+25 wt% NaCl) at 750 °C and 800 °C. X-ray diffractometer (XRD), scanning electron microscope (SEM), energy dispersive spectrometer (EDS), and transmission electron microscope (TEM) are used to analyze the phase compositions and film structures of the corrosion products, as well as to explore the corrosion mechanism. The results show that a thicker oxide layer is formed at higher temperatures, indicating poorer hot corrosion resistance at elevated temperatures. The corrosion products form at both temperatures to show a distinct layered structure, the outer layer is mainly composed of Cr2O3 and a small amount of TiO2, while the inner layer consists of Al2O3, CrS, and TiS. In addition, it is found that the corrosion mechanism of O, S, and Cl elements in the corrosion process is synergistic and accompanied by alkaline melting.

Isothermal heat treatment experiments were used to studied the dissolution behavior and kinetics of the γ′ precipitates within the hot-extruded novel powder metallurgy Ni-based superalloy A1. The characteristics of the γ′ precipitates were accurately and rapidly extracted by deep learning methods. The JMAK models were established to predict the change of the area fraction of γ′ precipitates during heat treatment. The determination coefficient R2 of model is 0.99. The results indicate that the dissolution sequence, morphological evolution, and dissolution mechanisms of the three types of γ′ precipitates are different. The small-sized tertiary γ′ precipitates (γ′t) dissolve first, while the larger-sized primary γ′ precipitates (γ′p) dissolve last. After 15 min at 1120 °C, there were only a small amount of γ′ precipitates with 0.19 ± 0.03 % area fraction. And there was not significant changed over time. After 1 min at 1150 °C, the γ′ precipitates completely dissolved. During the process of low temperature subsolvus heat treatment (1060 °C, 1090 °C), the large-sized γ′s grown at the expense of consuming the small-sized γ′ precipitates, and the γ′s tend towards directional arrangement due to elastic interaction energy. During the subsolvus heat treatment process, the γ′p spilt due to elastic strain energy and the uneven diffusion of alloying elements, while neck-connected coalescence coarsening occurs due to the overlapping diffusion fields.

Ischemic stroke, a primary cause of disability and the second leading cause of mortality, has emerged as an urgent public health issue. Growing evidence suggests that the Cyclic GMP-AMP synthase (cGAS)- Stimulator of interferon genes (STING) pathway, a component of innate immunity, is closely associated with microglia activation, neuroinflammation, and regulated cell death in ischemic stroke. However, the mechanisms underlying this pathway remain inadequately understood. This article comprehensively reviews the existing literature on the cGAS-STING pathway and its multifaceted relationship with ischemic stroke. Initially, it examines how various risk factors and pre-disease mechanisms such as metabolic dysfunction and senescence (e.g., hypertension, hyperglycemia, hyperlipidemia) affect the cGAS-STING pathway in relation to ischemic stroke. Subsequently, we explore in depth the potential pathophysiological relationship between this pathway and oxidative stress, endoplasmic reticulum stress, neuroinflammation as well as regulated cell death including ferroptosis and PANoptosis following cerebral ischemia injury. Finally, it suggests that intervention targeting the cGAS-STING pathway may serve as promising therapeutic strategies for addressing neuroinflammation associated with ischemic stroke. Taken together, this review concludes that targeting the microglia cGAS-STING pathway may shed light on the exploration of new therapeutic strategies against ischemic stroke.

A SAT-based security protocol formalization analysis method named SAT-LMC is proposed.The method introduces optimized the initial state and transformational rules with “lazy” idea.The efficiency of detection is significantly improved.Moreover，by adding support for strong type flaw attack defect，the attack detection becomes more comprehensive.A security protocol analysis tool is implemented based on the method; a type flaw attack is detected for protocol Otway-Rees.For OAuth2.0 protocol，analysis shows that there is a kind of man-in-the-middle attack of the authorization code in some application scenarios.

The tumor suppressor p53 is induced by genotoxic stress in both normal and transformed cells and serves to transcriptionally coordinate cell cycle checkpoint control and programmed cell death responses. Macrophage migration inhibitory factor (MIF) is an autocrine and paracrine acting cytokine/growth factor that promotes lung adenocarcinoma cell motility, anchorage-independence and neo-angiogenic potential. Several recent studies indicate that the only known homolog of MIF, D-dopachrome tautomerase (D-DT - also referred to as MIF-2), has functionally redundant activities with MIF and cooperatively promotes MIF-dependent pro-tumorigenic phenotypes. We now report that MIF and D-DT synergistically inhibit steady state p53 phosphorylation, stabilization and transcriptional activity in human lung adenocarcinoma cell lines. The combined loss of MIF and D-DT by siRNA leads to dramatically reduced cell cycle progression, anchorage independence, focus formation and increased programmed cell death when compared to individual loss of MIF or D-DT. Importantly, p53 mutant and p53 null lung adenocarcinoma cell lines were only nominally rescued from the cell growth effects of MIF/D-DT combined deficiency suggesting only a minor role for p53 in these transformed cell growth phenotypes. Finally, increased p53 activation was found to be independent of aberrantly activated AMP-activated protein kinase (AMPK) that occurs in response to MIF/D-DT-deficiency but is dependent on reactive oxygen species (ROS) that mediate aberrant AMPK activation in these cells. Combined, these findings suggest that both p53 wildtype and mutant human lung adenocarcinoma tumors rely on MIF family members for maximal cell growth and survival.

Background: Numerous approaches have been utilized to optimize mesenchymal stem cells (MSCs) performance in treating osteoarthritis (OA), however, the constrained diminished activity and chondrogenic differentiation capacity impede their therapeutic efficacy. Previous investigations have successfully shown that pretreatment with nanosecond pulsed electric fields (nsPEFs) significantly enhances the chondrogenic differentiation of MSCs. Therefore, this study aims to explore nsPEFs as a strategy to improve OA therapy by enhancing MSCs' activity and chondrogenic differentiation and also investigate its potential mechanism. Methods: In this study, a million MSCs were carefully suspended within a 0.4-cm gap cuvette and subjected to five pulses of nsPEFs (100 ns at 10 kV/cm, 1 Hz), with a 1-s interval between each pulse. A control group of MSCs was maintained without nsPEFs treatment for comparative analysis. nsPEFs were applied to regulate the MSCs performance and hinder OA progresses. In order to further explore the corresponding mechanism, we examined the changes of MSCs transcriptome after nsPEF pretreatment. Finally, we studied the properties of extracellular vesicles (EVs) secreted by MSCs affected by nsPEF and the therapeutic effect on OA. Results: We found that nsPEFs pretreatment promoted MSCs migration and viability, particularly enhancing their viability temporarily in vivo, which is also confirmed by mRNA sequencing analysis. It also significantly inhibited the development of OA-like chondrocytes in vitro and prevented OA progression in rat models. Additionally, we discovered that nsPEFs pretreatment reprogrammed MSC performance by enhancing EVs production (5.77 ± 0.92 folds), and consequently optimizing their therapeutic potential. Conclusions: In conclusion, nsPEFs pretreatment provides a simple and effective strategy for improving the MSCs performance and the therapeutic effects of MSCs for OA. EVs-nsPEFs may serve as a potent therapeutic material for OA and hold promise for future clinical applications. The translational potential of this article: This study indicates that MSCs pretreated by nsPEFs greatly inhibited the development of OA. nsPEFs pretreatment will be a promising and effective method to optimize the therapeutic effect of MSCs in the future.

Objective Predicting whether the posterior cruciate ligament (PCL) should be preserved during total knee arthroplasty (TKA) procedures is a complex task in the preoperative phase. The choice to either retain or excise the PCL has a substantial effect on the surgical outcomes and biomechanical integrity of the knee joint after the operation. To enhance surgeons' ability to predict the removal and retention of the PCL in patients before TKA, we developed machine learning models. We also identified significant feature factors that contribute to accurate predictions during this process. Methods Patients' data on TKA continuously performed by a single surgeon who had intended initially to undergo implantation of cruciate‐retaining (CR) prostheses was collected. During the sacrifice of PCL, we utilized anterior‐stabilized (AS) tibial bearings. The dataset was split into CR and AS categories to form distinct groups. Relevant information regarding age, gender, body mass index (BMI), the affected side, and preoperative diagnosis was extracted by reviewing the medical records of the patients. To ensure the authenticity of the research, an initial step involved capturing X‐ray images before the surgery. These images were then analyzed to determine the height of the medial condyle (MMH) and lateral condyle (LMH), as well as the ratios between MLW and MMH and MLW and LMH. Additionally, the insall‐salvati index (ISI) was calculated, and the severity of any varus or valgus deformities was assessed. Eight machine‐learning methods were developed to predict the retention of PCL in TKA. Risk factor analysis was performed using the SHApley Additive exPlanations method. Results A total of 307 knee joints from 266 patients were included, among which there were 254 females and 53 males. A stratified random sampling technique was used to split patients in a 70:30 ratio into a training dataset and a testing dataset. Eight machine‐learning models were trained using data feeding. Except for the AUC of the LGBM Classifier, which is 0.70, the AUCs of other machine learning models are all lower than 0.70. In importance‐based analysis, ISI, MMH, LMH, deformity, and age were confirmed as important predictive factors for PCL retention in operations. Conclusion The LGBM Classifier model achieved the best performance in predicting PCL retention in TKA. Among the potential risk factors, ISI, MMH, LMH, and deformity played essential roles in the prediction of PCL retention.

Aedes albopictus, a common mosquito in Zhejiang Province, is a carrier of more than twenty arboviruses. There are dozens or even hundreds of imported cases of dengue fever every year in Zhejiang Province, and there have also been many local outbreaks caused by imported cases of dengue fever. The objectives were to assess the resistance of larvae and adults of several Ae. albopictus strains in Zhejiang Province to commonly used pyrethroid insecticides (beta-cypermethrin, deltamethrin and permethrin), and detect mutations in the sodium channel gene, to further analyse the relationship between phenotypic resistance and the frequency of mutations. The resistance of eight field strains of Ae. albopictus larvae to beta-cypermethrin, deltamethrin and permethrin ranged from 8.17 to 36.06, 12.12–107.3 and 1.55–81.9, respectively, and there was a significant positive correlation of interaction resistance among the three insecticides. The mutation frequencies of I1532T and F1534S in the larvae of Ae. albopictus were 0–6.25 % and 42.19–100.00 %. Moreover, the diagnostic doses of the three pyrethroids for adult Ae. albopictus mosquitoes were 0.2510 g/L, 0.1562 g/L, and 0.9072 g/L. Except for the Zhoushan strain, which was suspected to be resistant to beta-cypermethrin, the other field strains were resistant to the three pyrethroids, and there was a significant positive correlation of cross-resistance among the three insecticides. The mutation frequencies of I1532T and F1534S of adult Ae. albopictus were 0–1.56 % and 62.50–100.00 %. In addition, the LC50 of the larvae and the mortality rate of adult Ae. albopictus after treatment with the three pyrethroids were significantly and positively correlated with the frequency of the F1534S mutation. F1534S mutation occurred earlier than I1532T mutation in both larvae and adult Ae. albopictus. F1534S mutation in the sodium channel gene may be a particular biomolecular detection marker for resistance to pyrethroid insecticides in Ae. albopictus in Zhejiang Province.

Nonunions and delayed unions pose significant challenges in orthopedic treatment, with current therapies often proving inadequate. Bone tissue engineering (BTE), particularly through endochondral ossification (ECO), emerges as a promising strategy for addressing critical bone defects. This study introduces mesenchymal stem cells overexpressing Exendin-4 (MSC-E4), designed to modulate bone remodeling via their autocrine and paracrine functions. We established a type I collagen (Col-I) sponge-based in vitro model that effectively recapitulates the ECO pathway. MSC-E4 demonstrated superior chondrogenic and hypertrophic differentiation and enhanced the ECO cell fate in single-cell sequencing analysis. Furthermore, MSC-E4 encapsulated in microscaffold, effectively facilitated bone regeneration in a rat calvarial defect model, underscoring its potential as a therapeutic agent for bone regeneration. Our findings advocate for MSC-E4 within a BTE framework as a novel and potent approach for treating significant bone defects, leveraging the intrinsic ECO process.

Summary: Many countries and commercial organizations have shown great interest in constructing a Martian base. In situ resource utilization (ISRU) provides a cost-effective way to achieve this ambitious goal. In this article, we proposed to use Martian soil simulant to produce a fiber to satisfy material requirement for the construction of Martian base. The composition, melting behavior, and fiber forming process of the soil simulant was studied, and continuous fiber with maximum strength of 1320 MPa and elastic modulus of 99 GPa was obtained on a spinning facility. The findings of this study demonstrate the feasibility of ISRU to prepare Martian fiber from the soil on the Mars, offering a new way to obtain key materials for the construction of a Martian base.

Abstract Background Hip fractures are a major public health concern among middle-aged and older adults. It is important to understand the associated risk factors to inform health policies and develop better prevention strategies. Musculoskeletal pain is a possible implicating factor, being associated with physical inactivity and risk of falls. However, the association between musculoskeletal pain and hip fractures has not been clearly investigated. Methods A nationally representative sample of the Chinese population was obtained from the China Health and Retirement Longitudinal Study (CHARLS). The study collected patient information on their demographic characteristics, socioeconomic status, other health-related behavior, and history of musculoskeletal pain and hip fractures. Univariate and multivariate analyses were conducted to investigate the factors influencing the risk of hip fracture, including factors related to the individual and to musculoskeletal pain. P for trend test was performed to assess the trend of each continuous variable. The robustness and bias were assessed using the bootstrap method. Restricted cubic spline regression was utilized to identify linear or non-linear relationships. Results Among the 18,813 respondents, a total of 215 individuals reported that they have experienced a hip fracture. An increased risk of hip fracture was associated with the presence of waist pain and leg pain (P

Abstract In plants, B3 transcription factors play important roles in a variety of aspects of their growth and development. While the B3 transcription factor has been extensively identified and studied in numerous species, there is limited knowledge regarding its B3 superfamily in pepper. Through the utilization of genome-wide sequence analysis, we identified a total of 106 B3 genes from pepper (Capsicum annuum), they are categorized into four subfamilies: RAV, ARF, LAV, and REM. Chromosome distribution, genetic structure, motif, and cis-acting element of the pepper B3 protein were analyzed. Conserved gene structure and motifs outside the B3 domain provided strong evidence for phylogenetic relationships, allowing potential functions to be deduced by comparison with homologous genes from Arabidopsis. According to the high-throughput transcriptome sequencing analysis, expression patterns differ during different phases of fruit development in the majority of the 106 B3 pepper genes. By using qRT-PCR analysis, similar expression patterns in fruits from various time periods were discovered. In addition, further analysis of the CaRAV4 gene showed that its expression level decreased with fruit ripening and located in the nucleus. B3 transcription factors have been genome-wide characterized in a variety of crops, but the present study is the first genome-wide analysis of the B3 superfamily in pepper. More importantly, although B3 transcription factors play key regulatory roles in fruit development, it is uncertain whether B3 transcription factors are involved in the regulation of the fruit development and ripening process in pepper and their specific regulatory mechanisms because the molecular mechanisms of the process have not been fully explained. The results of the study provide a foundation and new insights into the potential regulatory functions and molecular mechanisms of B3 genes in the development and ripening process of pepper fruits, and provide a solid theoretical foundation for the enhancement of the quality of peppers and their selection and breeding of high-yield varieties.

The aim of this study was to examine the association between fluoride exposure and bone mineral density (BMD) in children and adolescents. We used data from the National Health and Nutrition Examination Survey (NHANES) 2015–2016. The fluoride concentrations in the water samples, plasma samples, and urine samples were measured electrometrically using an ion-specific electrode. Total body less head BMD (TBLH BMD) was measured using dual-energy X-ray absorptiometry (DXA). Weighted generalized linear regression models and restricted cubic splines (RCS) regression models were used to analyze the relationships between the three types of fluoride exposure and TBLH BMD. We performed subgroup analyses stratified by sex. A total of 1413 US children and adolescents were included in our study. In our linear regression models, we found inverse associations between fluoride concentrations in water and plasma and TBLH BMD. Additionally, we discovered a non-linear association between fluoride concentrations in water and plasma and TBLH BMD. No significant association or non-linear relationship was found between urine fluoride levels and TBLH BMD. This nationally representative sample study provides valuable insight into the intricate connection between fluoride exposure and skeletal health in children and adolescents.