Search

International audience; Persistent infection with some mucosal a-genus human papillomaviruses (HPVs; the most prevalent one being HPV16) can induce cervical carcinoma, anogenital cancers, and a subset of head and neck squamous cell carcinoma (HNSCC). Cutaneous b-genus HPVs (such as HPV5 and HPV8) associate with skin lesions that can progress into squamous cell carcinoma with sun exposure in Epidermodysplasia verruciformis patients and immunosuppressed patients. Here, we analyzed mechanisms used by E6 proteins from the aand b-genus to inhibit the interferon-b (IFNB1) response. HPV16 E6 mediates this effect by a strong direct interaction with interferon regulatory factor 3 (IRF3). The binding site of E6 was localized within a flexible linker between the DNAbinding domain and the IRF-activation domain of IRF3 containing an LxxLL motif. The crystallographic structure of the complex between HPV16 E6 and the LxxLL motif of IRF3 was solved and compared with the structure of HPV16 E6 interacting with the LxxLL motif of the ubiquitin ligase E6AP. In contrast, cutaneous HPV5 and HPV8 E6 proteins bind to the IRF3-binding domain (IBiD) of the CREB-binding protein (CBP), a key transcriptional coactivator in IRF3-mediated IFN-b expression. IMPORTANCE Persistent HPV infections can be associated with the development of several cancers. The ability to persist depends on the ability of the virus to escape the host immune system. The type I interferon (IFN) system is the first-line antiviral defense strategy. HPVs carry early proteins that can block the activation of IFN-I. Among mucosal a-genus HPV types, the HPV16 E6 protein has a remarkable property to strongly interact with the transcription factor IRF3. Instead, cutaneous HPV5 and HPV8 E6 proteins bind to the IRF3 cofactor CBP. These results highlight the versatility of E6 proteins to interact with different cellular targets. The interaction between the HPV16 E6 protein and IRF3 might contribute to the higher prevalence of HPV16 than that of other high-risk mucosal HPV types in HPV-associated cancers.

Antibody selectivity represents a major issue in the development of efficient immuno-therapeutics and detection assays. Its description requires a comparison of the affinities of the antibody for a significant number of antigen variants. In the case of peptide antigens, this task can now be addressed to a significant level of details owing to improvements in spot peptide array technologies. They allow the high-throughput mutational analysis of peptides with, depending on assay design, an evaluation of binding stabilities. Here, we examine the cross-reactive capacity of an antibody fragment using the PEPperCHIP(®) technology platform (PEPperPRINT GmbH, Heidelberg, Germany; >8800 peptides per microarray) combined with the surface plasmon resonance characterization (Biacore(®) technology; GE-Healthcare Biacore, Uppsala, Sweden) of a subset of interactions. ScFv1F4 recognizes the N-terminal end of oncoprotein E6 of human papilloma virus 16. The spot permutation analysis (i.e. each position substituted by all amino acids except cysteine) of the wild type decapeptide (sequence (6)TAMFQDPQER(15)) and of 15 variants thereof defined the optimal epitope and provided a ranking for variant recognition. The SPR affinity measurements mostly validated the ranking of complex stabilities deduced from array data and defined the sensitivity of spot fluorescence intensities, bringing further insight into the conditions for cross-reactivity. Our data demonstrate the importance of throughput and quantification in the assessment of antibody selectivity.

Cyclic peptides containing redox-stable thioether bridges might provide a useful alternative to disulfide-bridged bioactive peptides. We report the effect of replacing the disulfide bridge with a lanthionine linkage in a 16-mer cyclic peptide that binds to death receptor 5 (DR5, TRAIL-R2). Upon covalent oligomerisation, the disulfide-bridged peptide has previously shown similar behaviour to that of TNF-related apoptosis inducing ligand (TRAIL), by selectively triggering the DR5 cell death pathway. The structural and biological properties of the DR5-binding peptide and its desulfurised analogue were compared. Surface plasmon resonance (SPR) data suggest that these peptides bind DR5 with comparable affinities. The same holds true for dimeric versions of these peptides: the thioether is able to induce DR5-mediated apoptosis of BJAB lymphoma and tumorigenic BJELR cells, albeit to a slightly lower extent compared to its disulfide homologue. NMR analysis revealed subtle variation in the conformations of the two peptides and suggests that the thioether peptide is slightly less folded than its disulfide homologue. These observations could account for the different capability of the two dimers to cluster DR5 receptors on the cell surface and to trigger apoptosis. Nevertheless, our results suggest that the thioether peptide is a potential candidate for evaluation in animal models.

We have used surface plasmon resonance to investigate the nucleic acid binding properties of the core protein of hepatitis C virus, a disordered protein believed to chaperone the genomic RNA. It was previously shown that a peptide (peptide E) corresponding to the association of two basic clusters of core enhances the annealing and the dimerization of nucleic acid fragments derived from a stem loop (SL2) in the 3′ untranslated region of the hepatitis C virus genome. However, strong aggregation of nucleic acids by core or peptide E in the excess of the latter precluded the characterization of their binding parameters up to now. By careful design of surface plasmon resonance experiments, we obtained accurate binding parameters for the interaction of peptide E with SL2-derived oligonucleotides of different lengths and sequences, in form of stem-loop, duplex or strand. Peptide E was found to bind in a salt dependent manner to all oligonucleotides assayed. Affinity data identify at least two binding modes, of which one is independent of sequence/structure, and the other is specific to the SL2 stem-loop fold. Stoichiometry data support a multi-motif binding model allowing formation of higher-order complexes. We propose that the modular binding mode demonstrated for structured RNA-binding proteins also applies to this disordered chaperone and is relevant to its activity.

Therapeutic targeting of the VEGF signaling axis by the VEGF-neutralizing monoclonal antibody bevacizumab has clearly demonstrated clinical benefit in cancer patients. To improve this strategy using a polyclonal approach, we developed a vaccine targeting VEGF using 3D-structured peptides that mimic the bevacizumab binding site. An in-depth study on peptide optimization showed that the antigen's 3D structure is essential to achieve neutralizing antibody responses. Peptide 1 adopts a clear secondary, native-like structure, including the typical cysteine-knot fold, as evidenced by CD spectroscopy. Binding and competition studies with bevacizumab in ELISA and surface plasmon resonance analysis revealed that peptide 1 represents the complete bevacizumab binding site, including the hairpin loop (beta 5-turn-beta 6) and the structure-supporting beta 2-alpha 2-beta 3 loop. Vaccination with peptide 1 elicited high titers of cross-reactive antibodies to VEGF, with potent neutralizing activity. Moreover, vaccination-induced antisera displayed strong angiostatic and tumor-growth-inhibiting properties in a preclinical mouse model for colorectal carcinoma, whereas antibodies raised with peptides exclusively encompassing the beta 5-turn-beta 6 loop (peptides 15 and 20) did not. Immunization with peptide 1 or 7 (murine analog of 1) in combination with the potent adjuvant raffinose fatty acid sulfate ester (RFASE) showed significant inhibition of tumor-growth in the B16F10 murine melanoma model. Based on these data, we conclude that this vaccination technology, which is currently being investigated in a phase I clinical trial (NCT02237638), can potentially outperform currently applied anti-VEGF therapeutics.

Cellular receptor systems are expected to present complex ligand interaction patterns that cannot be evaluated assuming a simple one ligand:one receptor interaction model. We have previously evaluated heterogeneous interactions using an alternative method to regression analysis, called Interaction Map (IM). IM decomposes a time-resolved binding curve into its separate components. By replacing the reductionistic, scalar kinetic association rate constant k(a) and dissociation rate constant k(d) with a two-dimensional distribution of k(a) and k(d), it is possible to display heterogeneous data as a map where each peak corresponds to one of the components that contribute to the cumulative binding curve. Here we challenge the Interaction Map approach by artificially generating heterogeneous data from two known interactions, on either LigandTracer or Surface Plasmon Resonance devices. We prove the ability of IM to accurately decompose these man-made heterogeneous binding curves composed of two different interactions. We conclude that the Interaction Map approach is well suited for the analysis of complex binding data and forecast that it has a potential to resolve previously uninterpretable data, in particular those generated in cell-based assays.

We investigated the suitability of surface plasmon resonance (SPR) for providing quantitative binding information from direct screening of a chemical library on protein tyrosine phosphatase 1b (PTP1B). The experimental design was established from simulations to detect binding with K(D)10⁻⁴ M. The 1120 compounds (cpds) were injected sequentially at concentrations [C(cpd)] of 0.5 or 10 μM over various target surfaces. An optimized evaluation procedure was applied. More than 90% of cpds showed no detectable signal in four screens. The 30 highest responders at C(cpd)=10 μM, of which 25 were selected in at least one of three screens at C(cpd)=0.5 μM, contained 22 promiscuous binders and 8 potential PTP1B-specific binders with K(D) ~10⁻⁵ M. Inhibition of PTP1B activity was assayed and confirmed for 6 of these, including sanguinarine, a known PTP1B inhibitor. C(cpd) dependence studies fully confirmed screening conclusions. The quantitative consistency of SPR data led us to propose a structure-activity relationship (SAR) model for developing selective PTP1B inhibitors based on the ranking of 10 arylbutylpiperidine analogs.

10 páginas, 6 figuras, 2 tablas -- PAGS nros. 559-568, We present data that reveal crucial differences between the binding mode of anti-gastrin17 (G17, pyroEGPWLEEEEEAYGWMDF-NH2) monoclonal antibodies (mAbs) and their CDR-derived synthetic binders (SBs) with G17. The mAbs recognize the N-terminal sequence of G17 (pyroEGPWL) with nanomolar affinity and high sequence selectivity. Molecular simulations suggest that G17 recognition is based primarily on a multitude of weak antibody–ligand interactions (H-bonding, van der Waals, etc.) inside a structurally well-defined cleft-like binding pocket. Relatively small structural changes (e.g. G-2 to A for G17) have a drastic impact on affinity, which is characteristic for antibody-like binding. In contrast, SBs recognize various sequences, including G17-unrelated targets with affinities of 1:1 complexes estimated in the 0.1–1.0 mM range. In most cases however, the G17/SB complex stoichiometries are not well-defined, giving rise to multimer aggregate formation with high apparent complex stabilities. Mutational studies on both G17 and SBs reveal the importance of positively charged (K/R) and aromatic residues (W/Y/F) for G17/SB complex formation. We propose that the synthetic binders use combinations of electrostatic, hydrophobic, and/or cation–π interactions in a variety of ways due to their intrinsic flexibility. This may also be the reason for their relatively low target specificity. We speculate that our findings are of general relevance, in showing that high-affinity mAbs do not necessarily provide the optimal basis for functional mimics design, This work was financially supported by a European Commission FP6 cooperative research project (COOP-CT-2004-512691). RB was recipient of a contract from the Fondo de Investigaciones Sanitarias of the Spanish Ministry of Health. DA and SGS acknowledge support from the CNRS (Centre National de la Recherche Scientifique) and UdS (University of Strasbourg). PT and RHM acknowledge also financial support from the Dutch Ministry of Economic Affairs (grant TSGE2017). RB and IC acknowledge financial support from the Spanish Ministry of Science (grant BIO2006-07689)

A ratiometric fluorescent sensor was obtained by solid-phase synthesis of a peptide singly labeled at its N-terminus with a 3-hydroxychromone (3HC) derivative, an environmentally sensitive fluorophore with a two-band emission. The construct contains the binding site recognized by an antibody fragment, scFv1F4 Q34S , with nanomolar (nM) affinity. The dye only marginally affected the kinetic and equilibrium binding parameters of the scFv–peptide interaction, as measured by surface plasmon resonance. On interaction with the antibody fragment, the sensor showed up to 47% change in the ratio of its two emission bands, indicating an enhanced screening of the 3HC fluorophore from bulk water. Competition with two unlabeled peptides of different lengths led to a dynamic displacement of the construct governed by the relative binding constants. Calibration showed that the response is proportional to the ratio of scFv1F4 Q34S to labeled peptide. The detection limit of scFv1F4 Q34S was 15 nM. In a more complex medium (100 μg/ml bovine serum albumin), the scFv could be detected in the 50- to 100-nM range. This work demonstrates that, with the perspective of further improvements of the dye spectroscopic properties, fluorescent ratiometric sensing based on small synthetic peptides represents a promising tool for quantitative target detection.

Gastrin and its derivatives are becoming important targets for immunotherapy of pancreatic, gastric and colorectal tumors. This study was conducted to design antibodies able to block gastrin binding to the gastrin/cholecystokinin-2 (CCK-2) receptor in order to delay tumor growth. The authors have used different gastrin molecules, combined with the diphtheria toxoid, to generate and select human single chain variable fragments (scFvs) as well as mouse monoclonal antibodies and scFvs against different regions of gastrin. There was a remarkable conservation in the antibody repertoire against gastrin, independently of the approach and the species. The germlines most frequently used in gastrin antibody formation were identified. Three different epitopes were identified in the gastrin molecule. The resulting mouse monoclonal antibodies and scFvs were analyzed for gastrin neutralization using Colo 320 WT cells, which overexpress the CCK-2 receptor. The gastrin neutralizing activity assay showed that N-terminal specific mouse monoclonal antibodies were more efficient to inhibit proliferation of Colo 320 WT cells than the anti-C terminal antibodies. Moreover, the human antigastrin scFvs obtained in this study inhibited significantly the proliferation of Colo 320 tumoral cells. These findings should contribute to a more rational design of antibody-based antigastrin therapies in cancer, including passive administration of human antibodies with blocking activity. (c) 2008 Wiley-Liss, Inc.

The molecular mechanics Poisson–Boltzmann surface area (MM/PBSA) method was applied to the study of the protein–protein complex between a camelid single chain variable domain (cAb-Lys3) and hen egg white lysozyme (HEL), and between cAb-Lys3 and turkey egg white lysozyme (TEL). The electrostatic energy was estimated by solving the linear Poisson–Boltzmann equation. A free energy decomposition scheme was developed to determine binding energy hot spots of each complex. The calculations identified amino acids of the antibody that make important contributions to the interaction with lysozyme. They further showed the influence of small structural variations on the energetics of binding and they showed that the antibody amino acids that make up the hot spots are organized in such a way as to mimic the lysozyme substrate. Through further analysis of the results, we define the concept of “efficient amino acids,” which can provide an assessment of the binding potential of a particular hot spot interaction. This information, in turn, can be useful in the rational design of small molecules that mimic the antibody. The implications of using free energy decomposition to identify regions of a protein–protein complex that could be targeted by small molecules inhibitors are discussed. Proteins 2007. © 2007 Wiley-Liss, Inc.

0006-2960 (Print) Journal Article; The relationship between three environmental factors (ionic strength, pH, and temperature) and antigen-antibody binding kinetics was investigated using QSAR (quantitative structure-activity relationship) and molecular modeling approaches. The interaction used for this analysis is that between the camel antibody fragment cAbLys3 and lysozyme. Binding kinetics were measured using a Biacore 2000 instrument, at NaCl concentrations between 50 and 500 mM, at pH's between 5 and 10, and at temperatures between 15 and 30 degrees C, according to multivariate experimental designs. Variations in kinetic on- and off-rate parameters were up to 400- and 16-fold, respectively. Mathematical models that relate log k(on) to experimental conditions were developed. They indicated an influence of all three factors, with a clear dependency between pH and NaCl concentration for their effect on k(on). These models were able to predict on-rate parameters under new experimental conditions. Titration calculations using continuum electrostatics were performed on the crystallographic structures of the isolated and bound proteins to gain structural insight for the on-rate enhancement observed at pH

0022-2836 (Print) Journal Article; Cervical cancers evolve from lesions generated by genital human papillomaviruses (HPV). "Low-risk" genital HPVs cause benign proliferations whereas "high-risk" types have the potential to progress into cancer. High-risk HPV E6 oncoproteins interact with the ubiquitin ligase E6AP and target several cellular proteins, including p53 and proteins of the MAGI family, towards ubiquitin-mediated degradation. E6AP, like other E6 binding proteins such as E6BP, IRF-3 and paxillin, interacts with E6 via a consensus leucine-charged motif. Here we have investigated the kinetics of the interactions of a 15-mer peptide containing the LxxvarphiLsh motif of E6AP with E6. For this we have developed a Biacore assay based on antibody-capture on the sensor surface of GST- and/or MBP-E6AP peptide constructs followed by E6 protein injection. Our experiments show that E6 oncoproteins from four major high-risk (16, 18, 33 and 58) HPV types bind to E6AP with equilibrium dissociation constants in the low micromolar range. The kinetic dissociation parameters of these interactions are remarkably similar. On the other hand, low-risk HPV 11 E6 does not interact with E6AP even at relatively high concentrations. We also show that the two zinc-binding domains of E6 are required for E6AP recognition. Finally, we have analysed the binding properties of site-directed mutants of the E6AP-derived peptide. We demonstrate the importance for binding of conserved aliphatic side-chains and the moderate role of the global negative charge of the peptide. This work provides the first quantitative data on an HPV E6-mediated interaction, which support the current models of E6AP-mediated degradation.

The linear epitope recognized by three closely related antibodies specific for the E6 oncoprotein of papillomavirus type 16 was delineated by phage display, spot peptide synthesis on cellulose membranes, and kinetic measurements with antigenic variants using a BIACORE. The same approaches, recently applied to an antibody specific for tobacco mosaic virus protein, led to the clear-cut delineation of a functional epitope comprising four key positions with well defined physico-chemical properties. In contrast, the E6 system is characterized by a non-essential contribution to binding of various factors, so that combinations of alternative properties are compatible with measurable binding activity.

A nonrestrictive method for identifying covariance in protein families is described and applied to human and mouse germline Vκ and VH sequence alignments. Amino acids that occur at each position in a sequence alignment are divided into two sets, called a word, by generating all possible combinations of alternative amino acids. Each word is associated with a pattern of changes. Words with identical patterns identify covariant positions. In antibody variable domains, the number of words generated ranged between 1103 and 2195 depending on the alignment, of which 4 to 12 % occurred in covariant pairs. Despite the nonrestrictive character of pattern generation, covariant residues did not reflect a random selection with respect to the nature of amino acid changes and/or their spatial proximity in a reference crystallographic structure. This approach allowed the identification of a covariance signal for positions with high variability, mostly located in the outer part of the common structural framework of antibody variable domains. Covariance in these regions may reflect the existence of alternative and mutually exclusive atomic arrangements that are compatible with antibody function. The method may be of general applicability to rationalize residue variability in protein families. Proteins 2000;41:475–484. © 2000 Wiley-Liss, Inc.

The introduction in 1990 of a new biosensor technology based on surface plasmon resonance has revolutionized the measurement of antigen-antibody binding interactions. In this technique, one of the interacting partners is immobilized on a sensor chip and the binding of the other is followed by the increase in refractive index caused by the mass of bound species. The following immunochemical applications of this new technology will be described: (1) functional mapping of epitopes and paratopes by mutagenesis; (2) analysis of the thermodynamic parameters of the interaction; (3) measurement of the concentration of biologically active molecules; (4) selection of diagnostic probes.

Recombinant Fabs, 57P and 174P, recognizing peptide 134–151 of the coat protein of tobacco mosaic virus, differ by 15 amino acid changes in the sequence of their variable region. Kinetic analysis using BIAcoreTM showed that they recognized five peptide variants in the same ranking order, but that Fab 174P consistently dissociated faster from the peptides compared to Fab 57P. In order to identify amino acid substitutions that are responsible for differences in dissociation rates of the two Fabs, six hybrid Fabs have been constructed by exchanging three DNA segments. Four single and five multiple mutants were obtained by site-directed mutagenesis. All Fabs recognized variant peptides in a similar ranking order. The high precision of biosensor measurements made it possible to detect small contributions to dissociation kinetics of at least five substitutions, as well as the presence of small-magnitude non-additive effects of multiple substitutions. Our results demonstrate the cooperative influence on dissociation kinetics of amino acid residues located away from each other and away from the Fab combining site.

The introduction in 1990 of a new biosensor technology based on surface plasmon resonance has greatly simplified the measurement of binding interactions in biology. This new technology known as biomolecular interaction analysis makes it possible to visualize the binding process as a function of time by following the increase in refractive index that occurs when one of the interacting partners binds to its ligand immobilized on the surface of a sensor chip. None of the reactants needs to be labelled, which avoids the artefactual changes in binding properties that often result when the molecules are labelled. Biosensor instruments are well-suited for the rapid mapping of viral epitopes and for identifying which combinations of capturing and detector Mabs will give the best results in sandwich assays. Biosensor binding data are also useful for selecting peptides to be used in diagnostic solid-phase immunoassays. Very small changes in binding affinity can be measured with considerable precision which is a prerequisite for analyzing the functional effect and thermodynamic implications of limited structural changes in interacting molecules. On-rate (ka) and off-rate (kd) kinetic constants of the interaction between virus and antibody can be readily measured and the equilibrium affinity constant K can be calculated from the ratio ka/kd = K.

We have developed a surface plasmon resonance (SPR)-based inhibition in solution assay (ISA) to search for inhibitors of the medium affinity (KD = 0.8 μM) interaction between an E6-derived peptide (E6peptide) immobilized on the sensor and a PDZ domain (MAGI-1 PDZ1) in the mobile phase. DZ domains are widespread protein-protein interaction modules that recognize the C-terminus of various partners. Simulations indicated that relatively low compound concentrations (10 μM) and limited peptide densities (Rmax200 resonance units) should allow the detection of inhibitors with a target affinity close to 100 μM, which was then demonstrated experimentally. ISA screening, carried out on the Prestwick Chemical Library® (1120 compounds), identified 36 compounds that inhibited the interaction by more than 5%. Concentration-dependent ISA, carried out on a subset of 19 potential inhibitors, indicated that 13 of these indeed affected the interaction between MAGI-1 PDZ1 and the E6peptide. No effect was observed for 84 compounds randomly chosen among noninhibitors. One of the four best inhibitors was a peptide binder, and three were PDZ binders with KD in the 10-50 μM range. We propose that a medium (μM) affinity between the target and surface-bound partner is optimal for SPR-based ISA screening.

The interface between the VL and VH domains of antibodies is highly conserved. To investigate the influence of conserved interface residues on Fab function, 13 interface residues were subjected to codon-based combinatorial alanine scanning mutagenesis in Fab 57P, specific for peptide 134 to 151 of the coat protein of tobacco mosaic virus. The 13 single mutants were analysed by Western blot to determine the effect of interface modifications on Fab expression. The kinetic rate constants of peptide-Fab mutant interactions were measured using the biosensor technology. Alanine replacements did not prevent assembly of the mutated Fabs and led to a modification of their binding properties in every case. Twelve of the 13 target residues correspond to homologous positions in the VL and VH domains, which have similar folds. Mutation at homologous positions mostly had different effects on antigen binding affinity. The replacement of bulky side-chains had the most drastic effect on binding. When smaller side-chains were replaced by alanine, the binding properties of Fab mutants differed slightly (by less than a factor of two), but significantly from that of Fab 57P. Modification of some of these residues, which are located 9 to 12 A away from the base of CDR loops, is unlikely to alter loop conformation. They may affect antigen binding indirectly by influencing the relative position of the VL and VH domains. Our results demonstrate that residues situated at the VL – VH interface and which are remote from the paratope are able to influence the antigen binding properties of antibodies.

The crystallographic structure of a complex between cyclosporin A and the Fab fragment of monoclonal antibody R45-45-11 has been solved to 2.65 A resolution (Altschuh et al ., 1992 a , Science 256 , 92; Vix et al ., 1993, Proteins 15 , 339), yielding a precise three-dimensional picture of interacting surfaces. In order to evaluate the contibution of observed contacts to the energy of interaction, we have measured the effect on binding affinity of minor chemical modifications of CS. The equilibrium binding constant of the Fab fragment for a set of cyclosporin analogs was obtained by measuring in a biosensor instrument the dependence of complex formation on Fab concentration, at constant analog concentrations. Data were analysed using Scatchard plots. Differences in binding energy resulting from cyclosporin modifications discriminated between two types of contact areas. The first type displays adaptability to structural modifications of cyclosporin at the cost of a small decrease in binding energy, and contacting residues in the antibody form the periphery of the combining site. The second type does not accommodate structural changes and corresponds in cyclosporin to three residues whose modifications drastically decrease binding energy with the antibody. The corresponding contact residues in the antibody form the core of the antibody combining site.

The two main catalytic residues Cys25 and His159 of the monomeric cysteine protease papain are located on different walls of a cleft formed by two domains. This topology suggests a possible relationship between relative domain organization and catalytic mechanism. The effect on enzymatic parameters of structural modifications at various locations of the two-domain interface of papain was examined by individual or double replacements by Ala of pairs of interacting residues. Most modifications had no effect on enzyme activity. However, the enzyme's substrate turnover (kcat) decreased following simultaneous alteration of the two most conserved residues, forming an apolar contact located 15 A away from the active site. The pH activity profile of the double mutant was unchanged, indicating a conserved ionization state of the active site thiolate-imidazolium ion pair. This state is strongly dependent on the distance separating the two residues, thus suggesting that the active site geometry has not been significantly altered. Efficient enzymatic activity in papain requires more than a correct active site geometry and is influenced by domain packing properties in a region remote from the active site.

International audience; Huntington's disease (HD) is caused by the expansion mutation above a length threshold of a polyglutamine (polyQ) stretch in the huntingtin (Htt) protein. Mutant Htt (mHtt) pathogenicity is proposed to rely on its malfunction and propensity to misfold and aggregate. Htt has scaffolding properties and has been reported to interact with hundreds of partners. Many interactors show apparent increased or decreased affinity (dysinteraction) for mHtt, which may account for selective malfunctions and striatal degeneration in HD. These dysinteractions are proposed to result from mutant polyQ conformational changes that remain elusive. To date, dysinteractions have only been studied using semi-quantitative techniques with their outcome potentially influenced by the presence of mHtt aggregates. Therefore, the molecular mechanism underlying these dysinteractions remains to be determined. Here, we have used purified proteins devoid of aggregates to quantify the interaction of normal and mHtt with two partners: SH3GL3, reported to have increased binding to mHtt, and the 2B4 antibody, a model partner. Using surface plasmon resonance and pull-down techniques, we show that in the absence of aggregation polyQ length has no effect on Htt interactions. We demonstrate that the presence of aggregates affects the spatial distribution and solubility of Htt partners and strongly influences the outcome of pull-down experiments. Our results show that expanded polyQ per se does not alter Htt interactions and suggest that aggregated mHtt form molecular platforms that influence the Htt interacting network. Modulating mHtt aggregation could thus have beneficial effects on specific cellular pathways deregulated in HD.

Surface Plasmon Resonance (SPR) biosensors monitor association and dissociation events between a binding partner that is immobilized on a sensor surface and the other partner injected over the surface. The SPR signal, which is related to the mass of molecules at the sensor surface, is plot as a function of time. The shape of the resulting curves depends on molecular concentrations of binding partners, kinetic on- and off-rate parameters and binding stoichiometry. Their mathematical analysis therefore allows calculating one or several of these parameters. Because of the high-information content of SPR data, the technology has numerous applications in research and biotechnology for the identification of binders and for the detailed characterization of binding. In particular, SPR is widely used in the development of therapeutic molecules, which is illustrated with antibodies and chemical compounds.

The fine modulation of peptide–antibody interactions was investigated with anti-peptide monoclonal antibodies recognizing peptide 125–136 of the coat protein of tobacco mosaic virus. Nine synthetic peptides presenting single amino acid substitutions were selected for detailed analysis on the basis of their reactivity in ELISA. Kinetic measurements of the binding of four antibodies to these peptides performed with a biosensor instrument (BIAcoreTM, Pharmacia) were used to quantify the contribution of individual residues to antibody binding. The results showed that even conservative exchanges of some residues in the epitope results in a small but significant decrease of the equilibrium affinity constant due mostly to a higher dissociation rate constant of the monoclonal antibodies. Two amino acid residues directly adjacent to the epitope, which appeared to play no role when tested by ELISA, were shown to influence the kinetics of binding. These data should be useful for computer modelling of the peptide–antibody interactions.

The structure of the complex between cyclosporin A and the Fab fragment of a monoclonal antibody has been established by Crystallographic analysis to 2.65 Aresolution. The structure has been solved by molecular replacement using a composite Fab model. The current R-factor after refinement is 0.179 between 8 and 2.65Aresolution. The antibody is one among three known structures with long H3 loops. This loop conformation is observed for the first tune in the presence of the antigen. Residues from all six hypervariable loops interact with cyclosporin A. However, the 17 residues long loop H3 is the main contributor to the buried combining site area and to the van der Waals contacts made with cyclosporin A, with 52 and 63%, respectively, of the total contribution. © 1993 Wiley-Liss, Inc.

The interaction of antipeptide antibodies with the corresponding peptide and the cognate protein has been compared using a novel biosensor technology (BIAcoreTM Pharmacia). The peptide corresponds to residues 110–135 of the coat protein of tobacco mosaic virus, known to encompass an α-helical region reactive with antiprotein antibodies. A panel of 33 monoclonal antibodies raised against the peptide was studied and the epitope recognized by these antibodies was determined by the pepscan method. Further discrimination between the antibodies was performed by measurements of association and dissociation kinetic constants. Several antibodies showed an heterogeneous binding profile when reacting with the 25 residue long peptide but not with a shorter 10 residue peptide suggesting that they recognized different conformational states in the longer peptide. Equilibrium affinity constants were calculated for five of the antibodies and were found to be 10–50 times higher for the peptide than for the protein, the difference being caused mainly by a lower association rate constant.

For more than 50 years, tobacco mosaic virus (TMV) has been used as a model system for studying various aspects of virus-antibody interactions. Distinct epitopes called neotopes and cryptotopes have been identified in intact TMV particles and dissociated viral protein respectively and a correlation has been found to exist between the location of continuous epitopes and the extent of segmental mobility along the viral polypeptide chain. The occurrence of bivalent antibody binding was shown to influence the observed affinity of TMV antibodies and kinetic measurements of antibody binding to viral peptides made it possible to analyze the mechanisms of binding of monoclonal antibodies. It seems likely that the TMV model will continue to yield a rich harvest of immunochemical data relevant to many viral systems.

Differences in the affinity of a monoclonal antibody raised against the protein of tobacco mosaic virus for 15 related peptides (residues 134-146) carrying single-residue modifications were investigated using a novel biosensor technology (Pharmacia BIAcore). Analysis of the peptide-antibody interaction in real time allowed fast and reproducible measurements of both association and dissociation rate constants. Out of 15 mutant peptides analyzed, five were not recognized by the antibody at all, and seven were recognized as well as the wild-type peptide. For three of the peptides, the rate constants were different for the mutant and wild-type peptides. The pattern of residue recognition suggests that the epitope is formed by three residues (140, 143, and 144) in a helical conformation that mimics the structure in the protein. Even a minor modification of these residues totally abolishes recognition by the antibody. Modifications of adjacent residues result in small but significant differences in association and/or dissociation rate constants. One of the recognized residues is totally buried in the three-dimensional structure of TMV protein, suggesting that a structural rearrangement next to the helix occurs during protein-antibody interaction.

An automated biosensor system designed for measuring molecular interactions in real time and without any labelling of the reactants has been used to study the interaction of two animal viruses (vacinia virus and poliovirus) and two plant viruses (cowpea mosaic virus and tobacco mosaic virus) with monoclonal antibodies. Using monoclonal antibodies specific for different conformational states of viral protein, it was found that the virus particles retained their conformational integrity when immobilized on the dextran matrix present on the sensor chip. Compared to conventional solid phase immunoassays, in which immobilized proteins are usually partly denatured, the biosensor system presents several advantages for studying virus-antibody interaction.

9 páginas, 6 figuras, 1 tabla -- PAGS nros. 34126-34134, The great success of therapeutic monoclonal antibodies has fueled research toward mimicry of their binding sites and the development of new strategies for peptide-based mimetics production. Here, we describe a new combinatorial approach for the production of peptidomimetics using the complementarity-determining regions (CDRs) from gastrin17 (pyroEGPWLEEEEEAYGWMDF-NH(2)) antibodies as starting material for cyclic peptide synthesis in a microarray format. Gastrin17 is a trophic factor in gastrointestinal tumors, including pancreatic cancer, which makes it an interesting target for development of therapeutic antibodies. Screening of microarrays containing bicyclic peptidomimetics identified a high number of gastrin binders. A strong correlation was observed between gastrin binding and overall charge of the peptidomimetic. Most of the best gastrin binders proceeded from CDRs containing charged residues. In contrast, CDRs from high affinity antibodies containing mostly neutral residues failed to yield good binders. Our experiments revealed essential differences in the mode of antigen binding between CDR-derived peptidomimetics (K(d) values in micromolar range) and the parental monoclonal antibodies (K(d) values in nanomolar range). However, chemically derived peptidomimetics from gastrin binders were very effective in gastrin neutralization studies using cell-based assays, yielding a neutralizing activity in pancreatic tumoral cell lines comparable with that of gastrin-specific monoclonal antibodies. These data support the use of combinatorial CDR-peptide microarrays as a tool for the development of a new generation of chemically synthesized cyclic peptidomimetics with functional activity, This work was supported in part by European Commission FP6 Cooperative Research Project COOP-CT-2004-512691

We present the design, synthesis, and functional evaluation of peptide-based fluorescent constructs for wavelength-ratiometric biosensing of a protein analyte. The concept was shown using the high-affinity model interaction between the 18 amino acid peptide pTMVP and a recombinant antibody fragment, Fab57P. pTMVP was functionalized in two different positions with 6-bromomethyl-2-(2-furanyl)-3-hydroxychromone, an environmentally sensitive fluorophore with a two-band emission. The equilibrium dissociation constant of the interaction between pTMVP and Fab57P was largely preserved upon labeling. The biosensor ability of the labeled peptide constructs was evaluated in terms of the relative intensity change of the emission bands from the normal (N*) and tautomer (T*) excited-state species of the fluorophore ( I(N*)/I(T*)) upon binding of Fab57P. When the peptide was labeled in the C terminus, the I(N*)/I(T*) ratio changed by 40% upon analyte binding, while labeling close to the residues most important for binding resulted in a construct that completely lacked ratiometric biosensor ability. Integrated biosensor elements for reagentless detection, where peptides and ratiometric fluorophores are combined to ensure robustness in both recognition and signaling, are expected to become an important contribution to the design of future protein quantification assays in immobilized formats.

Adrenomedullin (AM) is a peptidic hormone that was isolated in 1993, the function of which is related to several diseases such as diabetes, hypertension, and cancer. Compound 1 is one of the first nonpeptidic small-molecule negative modulators of AM, identified in a high-throughput screen carried out at the National Cancer Institute. Herein we report the synthesis of a series of analogues of 1. The ability of the synthesized compounds to disrupt the binding between AM and its monoclonal antibody has been measured, together with surface plasmon resonance (SPR)-based binding assays as implemented with Biacore technology. These data were used to derive a three-dimensional quantitative structure-activity relationship (3D-QSAR) model, with a q(2) (LOO) value of 0.8240. This study has allowed us to identify relevant features for effective binding to AM: the presence of a hydrogen-bond donor group and an aromatic ring. Evaluation of the ability of selected compounds to modify cAMP production in Rat2 cells showed that the presence of a free carboxylic acid is essential for negative AM modulation.

The purification of "difficult" proteins for structural and functional studies remains a challenge. A widely used approach is their production as fusions with an affinity tag, so that a generic tag-based purification protocol can be applied. Alternatively, immuno-affinity using a protein-specific antibody allows purification of unmodified proteins in a single step, if mild elution conditions can be identified for dissociating the complex without disrupting the folding of the protein. Here, we describe a quantitative structure activity relationship (QSAR) strategy to predict optimized elution conditions from a mathematical model that relates target/antibody dissociation to environmental changes. We illustrate the strategy with the E6 protein of the human papilloma virus (HPV) 16, a highly unstable protein central to HPV-induced carcinogenesis. Surface plasmon resonance (SPR) was used to measure the kinetics of dissociation of an E6 peptide from an E6-specific antibody in a set of multivariate conditions, where three environmental factors (pH, NaCl concentration, and temperature) were varied. The QSAR model indicated that dissociation is favored at pH < 5, which is detrimental to E6 folding, and also at pH > or = 10 if the temperature is high. We verified that the conclusions of the QSAR study with the peptide were valid for the scFv1F4/E6 protein complex, and that the recovered protein was capable of mediating p53 degradation. Finally, we demonstrated that the optimized elution conditions (pH 10, 35 degrees C) were adequate for purifying the recombinant E6 protein from crude cell extracts.

Early work on protein antigenicity led to the common belief that proteins possess a finite number of antigenic determinants located in accessible regions of the molecule's surface. This view is now changing. As a result of extensive studies, seven continuous epitopes have been located on tobacco mosaic virus (TMV) protein by measuring the antigenic activity of short peptides with anti-protein antibodies. The structure of the viral protein has been refined in Cambridge, enabling the Strasbourg workers to correlate the position of these epitopes with regions of high segmental mobility in the protein. Surface accessibility is not a sufficient condition for antigenicity, because six short peptides corresponding to accessible regions of the protein possess no antigenic activity. Recent work in Strasbourg shows that when longer peptides of TMV protein are used, more antigenic determinants are found and these lie in more structured regions of the protein (e.g. helices). In these cases the longer peptide may be folding up in solution to mimic part of the native structure.

Abnormally expanded polyglutamine (polyQ) tracts provide a gain of toxic functions to nine otherwise unrelated human proteins and induce progressive neurodegenerative diseases. Over the past ten years, it was suggested that only polyQ tracts longer than a specific threshold adopt a particular structure, which would be the cause of the apparent polyQ length-dependent toxicity threshold observed in polyQ diseases. We have used a combination of biochemical and biophysical approaches to compare the structural properties of polyQ of pathogenic and non-pathogenic lengths under various conditions. We observe that pathogenic and non-pathogenic polyQ, as soluble species and upon interaction with a partner, during aggregation, or as mature aggregates, display very similar structural properties. PolyQ length only influences the aggregation kinetics and, to a lesser extent, the stability of the aggregates. We thus propose that polyQ toxicity does not depend on a structural transition occurring above a specific threshold, but rather that polyQ tracts are inherently toxic sequences, whose deleterious effect gradually increases with their length. We discuss how polyQ properties and other cellular factors may explain the existence of an apparent polyQ length-dependent toxicity threshold.

Molecular biosensors are devices of molecular size that are designed for sensing different analytes on the basis of biospecific recognition. They should provide two coupled functions-the recognition (specific binding) of the target and the transduction of information about the recognition event into a measurable signal. The present review highlights the achievements and prospects in design and operation of molecular biosensors for which the transduction mechanism is based on fluorescence. We focus on the general strategy of fluorescent molecular sensing, construction of sensor elements, based on natural and designed biopolymers (proteins and nucleic acids). Particular attention is given to the coupling of sensing elements with fluorescent reporter dyes and to the methods for producing efficient fluorescence responses. Copyright (c) 2006 John Wiley & Sons, Ltd.

CD28 and CTLA-4 are the major costimulatory receptors on naive T cells. But it is not clear why CD28 is monovalent whereas CTLA-4 is bivalent for their shared ligands CD80/86. We generated bivalent CD28 constructs by fusing the extracellular domains of CTLA-4 or CD80 with the intracellular domains of CD28. Bivalent or monovalent CD28 constructs were ligated with recombinant ligands with or without TCR coligation. Monovalent CD28 ligation did not induce responses unless the TCR was coligated. By contrast, bivalent CD28 ligation induced responses in the absence of TCR engagement. To extend these findings to primary cells, we used novel superagonistic and conventional CD28 Abs. Superagonistic Ab D665, but not conventional Ab E18, predominantly ligates CD28 bivalently at low CD28/Ab ratios and induces Ag-independent T cell proliferation. Monovalency of CD28 for its natural ligands is thus essential to provide costimulation without inducing responses in the absence of TCR engagement.

8 p.-4 fig., The selection and production of scFvs from phage display synthetic antibody libraries are frequently delayed by the presence of amber (TAG) stop codons within the sequences corresponding to the variable CDRs. This is due to the use of randomised oligonucleotides for library design and amber mutations for joining the scFv to the phage protein pIII. The screening of such libraries may lead to the selection of scFvs containing stop codons. Then, multiple site-directed mutagenesis is required for their removal or, alternatively, the proteins must be expressed as scFv-pIII fusions, which are not suitable for many functional assays. We describe here an alternative procedure to express soluble scFvs, despite the presence of TAG stop codons, in the currently used Escherichia coli suppressor strain TG1. It is based on a simple mutagenesis protocol that replaces the amber codon between the scFv and the pIII gene by a different stop codon (TAA), functional in E. coli TG1. The expression of soluble scFvs in the suppressor strain TG1 permits their fully functional characterization including the determination of affinity constants, which are critical for selecting the right scFvs for further studies., This project was partially supported by an EU grant COOP-CT-2004-512691 and the grant B102003-01481 from the Ministry of Science and Technology (MCYT) of Spain.

Publisher Summary This chapter discusses the biosensor characterization of structure–function relationships in viral proteins. The most widely used biosensor instrument is the BIACORE. The chapter discusses the mapping of viral epitopes. The regions of the viral proteins recognized by the antibody are usually described in terms of amino-acid residues although it is at the level of atomic interactions that the recognition takes place. As antigenic reactivity is usually ascribed to particular residues in a protein—this has led to the classification of epitopes as either continuous or discontinuous—depending on whether the residues involved in the epitopes are contiguous in the polypeptide chain or not. The mapping of epitopes on the surface of viral proteins is commonly done by double-sandwich enzyme-linked immunosorbent assays (ELISA) using all possible pairwise combinations of a panel of monoclonal antibodies (Mabs). Biosensors are useful for selecting diagnostic reagents suitable for viral diagnosis by high throughput immunoassays.

Predictive engineering of antibodies exhibiting fast kinetic properties could provide reagents for biotechnological applications such as continuous monitoring of compounds or affinity chromatography. Based on covariance analysis of murine germline antibody variable domains, we selected position L34 (Kabat numbering) for mutational studies. This position is located at the VL/VH interface, at the base of the paratope but with limited antigen contacts, thus making it an attractive position for mild alterations of antigen binding properties. We introduced a serine at position L34 in two different antibodies: Fab (fragment antigen binding) 57P (Asn34Ser) and scFv (single chain fragment variable) 1F4 (Gln34Ser), that recognize peptides derived from the coat protein of tobacco mosaic virus and the oncoprotein E6, respectively. Both mutated antibodies exhibited similar properties: (i) expression levels of active fragments in Escherichia coli were markedly improved; (ii) thermostability was enhanced; and (iii) dissociation rate parameters (k(off)) were increased by 2- and at least 57-fold for scFv1F4 and Fab57P, respectively, while their association rate parameters (k(on)) remained unchanged. The L34 Ala and Thr mutants of both antibody fragments did not possess these properties. This first demontration of similar effects observed in two antibodies with different specificities may open the way to the predictive design of molecules with enhanced stability and fast dissociation rates.

The immunosuppressant drug cyclosporin (Cs) A is a cyclic undecapeptide which has been used as a model antigen because structural information and a large number of analogs, modified at each of its 11 positions, were available. This review summarizes immunochemical and crystallographic studies of the interaction between the Fab of monoclonal antibody R45-45-11 and Cs. Three points are discussed: (1) the different conformations of CsA and the question of its biologically active form; (2) the Fab-CsA recognition mechanism; and (3) the relationship between structure and binding properties of CsA analogs.

The objective of this work was to investigate the potential of the quantitative structure-activity relationships (QSAR) approach for predictive modulation of molecular interaction kinetics. A multivariate QSAR approach involving modifications in peptide sequence and buffer composition was recently used in an attempt to predict the kinetics of peptide-antibody interactions as measured by BIACORE. Quantitative buffer-kinetics relationships (QBKR) and quantitative sequence-kinetics relationships (QSKR) models were developed. Their predictive capacity was investigated in this study by comparing predicted and observed kinetic dissociation parameters (k(d)) for new antigenic peptides, or in new buffers. The range of experimentally measured k(d) variations was small (300-fold), limiting the practical value of the approach for this particular interaction. However, the models were validated from a statistical point of view. In QSKR, the leave-one-out cross validation gave Q(2) = 0.71 for 24 peptides (all but one outlier), compared to 0.81 for 17 training peptides. A more precise model (Q(2) = 0.92) could be developed when removing sets of peptides sharing distinctive structural features, suggesting that different peptides use slightly different binding modes. All models share the most important factor and are informative for structure-kinetics relationships. In QBKR, the measured effect on k(d) of individual additives in the buffers was consistent with the effect predicted from multivariate buffers. Our results open new perspectives for the predictive optimization of interaction kinetics, with important implications in pharmacology and biotechnology.

The possibility of obtaining from any antibody a fluorescent conjugate which responds to the binding of the antigen by a variation of its fluorescence, would be of great interest in the analytical sciences and for the construction of protein chips. This possibility was explored with antibody mAbD1.3 directed against hen egg white lysozyme. Rules of design were developed to identify the residues of the antibody to which a fluorophore could be chemically coupled, after changing them to cysteine by mutagenesis. These rules were based on: the target residue belonging to a topological neighbourhood of the antigen in the structure of the complex between antibody and antigen; its absence of functional importance for the interaction with the antigen; and its solvent accessibility in the structure of the free antibody. Seventeen conjugates between the single-chain variable fragment scFv of mAbD1.3 and an environment-sensitive fluorophore were constructed. For six of the ten residues which fully satisfied the design rules, the relative variation of the fluorescence intensity between the free and bound states of the conjugate was comprised between 12 and 75% (in non-optimal buffer), and the affinity of the conjugate for lysozyme remained unchanged relative to the parental scFv. In contrast, such results were true for only one of the seven residues which failed to satisfy one of the rules and were used as controls. One of the conjugates was studied in more detail. Its fluorescence increased proportionally to the concentration of lysozyme in a nanomolar range, up to 90% in a defined buffer, and 40% in serum. This increase was specific for hen egg lysozyme and it was not observed with a closely related protein, turkey egg lysozyme. The residues which gave operational conjugates (six in V L and one in V H ), were located in the immediate vicinity of residues which are functionally important, along the sequence of FvD1.3. The results suggest rules of design for constructing antigen-sensitive fluorescent conjugates from any antibody, in the absence of structural data.

A mutational analysis of three co-variant pairs of residues, located at the surface of a single-chain fragment, variable (scFv), remote from the antigen-binding site, was performed to investigate the tolerance of these positions to amino acid changes. The replacements consisted of the elimination or addition of charges, or in their replacement by a charge of opposite sign. As measured by Biacore, antigen-binding kinetics and specificity were essentially unaffected by the mutations. The purified scFvs remained mostly 100% active for 14 h, and their sensitivity to guanidinium-chloride denaturation was similar. These observations indicate that the mutations did not affect antigen-binding properties and that protein folding was conserved. However, the various scFvs differed greatly in half-life in periplasmic extracts (16 h at 25 degrees C). The deleterious effect on half-life produced by single mutations could be reversed by introducing a second mutation that restores the natural combination of amino acids in the co-variant pair, indicating that the consequence of charge modifications at these locations depends on the sequence context. We propose that the differences in half-life result from differences in aggregation propensities with other periplasmic proteins, related to the presence of charged patches at the surface of the scFvs. The practical implication is that changes in surface charge may drastically affect the level of active molecules in complex protein mixtures, a potentially important consideration in engineering scFvs for biotechnological or medical purposes.

Surface-exposed charges can affect protein structure, stability and solubility as well as the kinetics of both the folding process and interaction with binding partners. We have investigated the influence on kinetic interaction parameters of 14 conserved, surface-exposed charges located away from the paratope in the variable domains of two antibodies of different specificity. We found that conserved, surface-exposed, charged framework residues are asymmetrically distributed on opposite faces of both VH and VL domains. Some of the charges play a critical role in protein folding and stability. While electrostatic forces within or close to the binding interface can be used to optimize the association rate, we confirmed the predicted minor effects of charge modifications remote from the binding site. They had no effect on the dissociation rate parameter. Our study demonstrates the role of residues remote from the interaction site in the recognition function as well as the limited effect of surface charge modifications in antibody fragments on kinetic interaction parameters.

Data from real-time molecular interaction analysis using BIACORE are currently evaluated by numerical integration. We have investigated the ability of two software packages (BIAevaluation 3.0 and CLAMP99) to analyze complex interactions. Three experimental data sets of high quality obtained with BIACORE upgraded and 2000 instruments, representative of simple bimolecular, heterogeneous ligand, and mass-transport-limited interactions, were processed by the global fitting procedure. The two software, which differ mainly in the statistical assessment of the output values, were able to discriminate correctly between various interacting models and provided very close output parameters with satisfactory statistical tests.

Two different approaches, the phage display technique and the Spot peptide synthesis on cellulose membranes, were used to identify sequences recognized by Fab 57P, specific for tobacco mosaic virus protein (TMVP), and define the preferred chemical composition of a functional epitope. Kinetic measurements of the interaction between peptide variants and the antibody fragment were used to further refine the molecular basis of binding activity. Our results show that the functional epitope of Fab 57P requires precise physico-chemical properties at a limited number of positions, and that residues flanking these key residues can influence binding affinity. The phage display and Spot synthesis methods allowed the straightforward localization of the binding region and the identification of residues that are essential for recognition. However, these methods yielded slightly different views of accessory factors that are able to influence antibody binding. The influence on binding activity of these factors can only be assessed through quantitative affinity measurements.