Search

Non-noble metal nanoparticles supported on biomass-derived N-doped carbons as efficient and selective catalytic systems in alcohols oxidation reactions.

Three chitosans with different morphologies have been used (commercial chitosan powder, chitosan in film form and chitosan in globular form synthesized by the freeze-dried method) for the synthesis of biochars. The pyrolytic treatment has revealed that the biochar synthesized from the chitosan formed by the freeze-dried method reaches the highest CO

The adsorption of greenhouse gases (GHG) as a method to reduce their emissions into the atmosphere is an alternative that is easier to implement industrially and cheaper than other existing technologies, such as chemical capture, cryogenic separation, or membrane separation. The vast majority of works found in the literature have focused their efforts on capturing CO2 as it is the largest GHG. However, although N2O emissions are not as large as CO2, the impact that N2O has on the stratosphere and climate is much larger in proportion, despite which there is not much research on N2O capture. Since both gases are usually emitted into the atmosphere together (along with other gases), it is necessary to design selective adsorbents capable of capturing and separating these gases from each other and from other gases, to mitigate the effects of climate change. This review aims to compile the existing information to date on porous adsorbents, the characteristics of the N2O adsorption processes and, above all, aims to focus the reader’s gaze on the importance of designing selective adsorbents for greenhouse gas mixtures.

The effect of adding iron, cobalt or nickel to a prepared niobium-supported catalyst using mesoporous silica SBA-15 as a support was evaluated in the hydrodeoxygenation (HDO) reaction of anisole, chosen as a model compound in lignocellulosic biomass derived bio-oil. HDO activity as well as selectivity toward O-free products were highly dependent on the catalyst formulation: Ni incorporation showed the highest anisole conversion and selectivity to deoxygenated products, followed by Co and Fe counterparts. The activity was explained in terms of acidity, metal surface exposure and reducibility as a function of the interaction between the phases present. Regarding the characterization results, the better performance of NiNb/SBA-15 was associated with its lower acidity, higher Nb/Si surface exposure, NbO2/Nb2O5 ratio and better interaction between Ni and Nb species. The authors would like to acknowledge Project No. RTI2018-099668-B-C22 (Ministerio de Ciencia, Innovación y Universidades of Spain), Nos. UMA18-FEDERJA-126 and PY20-00375 (Junta de Andalucía projects), and FEDER funds for financial support. A.I.M. thanks the Ministry of Economy and Competitiveness for a Ramón y Cajal contract (No. RyC-2015-17870). D.B.P. thanks the University of Málaga (Spain) for a postdoctoral contract. R.H.A. thanks to the CIC-UMSNH 2020 Project. I.B.M. thanks University of Málaga (Spain) for a predoctoral contract. Funding for open access charge: Universidad de Málaga / CBUA

After the industrial revolution, the increase in the world population and the consumption of fossil fuels has led to an increase in anthropogenic CO2 emissions [...]

The term biolubricant applies to all lubricants that are easily biodegradable and non-toxic to humans and the environment. The uses of biolubricant are still very limited when compared to those of mineral oils, although this trend is increasing and depends on investment in research and development (R&D). The increase in demand for biodegradable lubricants is related to the evolution of environmental regulations, with more restrictive rules being implemented to minimize environmental impact caused by inappropriate disposal. This study provides an overview of the types, production routes, properties, and applications of biolubricants. Biolubricants are classified as either natural or synthetic oils according to chemical composition. Natural oils are of animal or vegetable origin and are rarely used because they are unstable at high temperatures and form compounds that are harmful to equipment and machines. Synthetic oils are obtained from chemical reactions and are the best lubricants for demanding applications. They are obtained by various routes, mainly by obtaining straight or branched-chain monoesters, diesters, triesters, and polyol esters from vegetable oils. The conversion of triglyceride to esters can be followed or preceded by one or more reactions to improve reactions such as epoxidation and hydrogenation.