Search

Dual-μReactor catalysis screening: a novel method combining multiple miniaturized packed-bed reactors and on-line HPLC/MS-analysis on one single microfluidic device.

Oxidative N-heterocyclic carbene (NHC) catalysis offers the chance to perform oxidative and oxygenative transformations which give rise to various NHC-bound intermediates, paving the way to non-umpolung processes through activation of carbon atoms and heteroatoms. The aim of this review is to discuss the developments of the literature in the field of oxidative NHC-catalysis since 2014, with particular focus to pivotal intermediates and their mechanistic involvement. More information can be found in the Review article by C. De Risi and co-workers. (DOI: 10.1002/chem.202202467).

Indole-decorated glycine derivatives are prepared through an environmentally benign cross-dehydrogenative coupling between

Heterogeneous organocatalysts hold great potential as they offer practical advantages in terms of purification and reusability compared with the homogeneous counterpart. A puzzling aspect is the solvent effect on their catalytic performance. Here we propose a new approach whereby T1/T2 NMR relaxation measurements are used to evaluate the strength of solvent–surface interactions in the polystyrene-supported N-heterocyclic carbene-promoted oxidation of aldehydes. The results reveal that solvents with high surface affinity lead to a decrease in catalyst activity.

In this work, the rheological behavior of stable poly(lactic acid) (PLA) dispersions in water, intended for coating applications, was investigated. The newly prepared dispersion consists of PLA particles with an average diameter of 222 ± 2 nm based on dynamic light scattering (DLS) and scanning electron microscopy (SEM) analyses, at concentrations varying in the 5-22 wt % range. Xanthan gum (XG), a bacterial polysaccharide, was used as a thickening agent to modulate the viscosity of the formulations. The rheological properties of the PLA dispersions with different XG and PLA contents were studied in steady shear, amplitude sweep, and frequency sweep experiments. Under steady shear conditions, the viscosity of all the formulations showed a shear-thinning behavior similar to XG solutions in the whole investigated 1-1000 s

The synthesis of hydroxymethylfuroate macrocyclic oligoesters c(HMF)n promoted by an N-heterocyclic carbene (NHC) organocatalyst is herein presented together with the subsequent organocatalytic, entropically- driven ring-opening polymerization (ED-ROP) leading to the fully furan-based poly(hydroxymethylfuroate) (PHMF). The target macrocycles (mostly trimer and tetramer species) have been obtained directly from the platform chemical HMF (77% isolated yield) under high dilution conditions using a quinone as the external oxidant and the green solvent Me-THF. The ED-ROP of c(HMF)n has been optimized at 160 °C (melt condensation technique) with the couple triazabicyclodecene (TBD)/n-octanol (1 : 1) as catalyst/initiator of the polymerization process in the presence of commercial antioxidants Irganox 1010 (0.1% w/w) and Irgafos 126 (0.3% w/w) to suppress degradation side reactions. Under these conditions, the bio-based PHMF (poly-HMF) was obtained as a color-free polymer with number-average molecular weight up to 48 600 g mol−1 and dispersity between 1.5 and 1.9 as determined by NMR and GPC analyses. The thermal behavior of the novel furan-based polyester PHMF was investigated (TGA and DSC analyses) observing a good thermal stability (onset temperature of degradation ∼310 °C) and a semicrystalline structure with melting temperature above 160 °C when processed from solvent, thus making PHMF a promising material for processing as other commercial polyesters.

In certain cancers, such as breast, prostate and some lung and skin cancers, the gene for the enzyme catalysing the second and last step in proline synthesis, δ1-pyrroline-5-carboxylate (P5C) reductase, has been found upregulated. This leads to a higher proline content that exacerbates the effects of the so-called proline-P5C cycle, with tumour cells effectively using this method to increase cell survival. If a method of reducing or inhibiting P5C reductase could be discovered, it would provide new means of treating cancer. To address this point, the effect of some phenyl-substituted derivatives of aminomethylene-bisphosphonic acid, previously found to interfere with the catalytic activity of plant and bacterial P5C reductases, was evaluated in vitro on the human isoform 1 (PYCR1), expressed in E. coli and affinity purified. The 3.5-dibromophenyl- and 3.5-dichlorophenyl-derivatives showed a remarkable effectiveness, with IC50 values lower than 1 µM and a mechanism of competitive type against both P5C and NADPH. The actual occurrence in vivo of enzyme inhibition was assessed on myelogenous erythroleukemic K562 and epithelial breast cancer MDA-MB-231 cell lines, whose growth was progressively impaired by concentrations of the dibromo derivative ranging from 10−6 to 10−4 M. Interestingly, growth inhibition was not relieved by the exogenous supply of proline, suggesting that the effect relies on the interference with the proline-P5C cycle, and not on proline starvation.

A strategy for the immobilization of chiral 2,3-bisaminocyclopropenium salt (pre-catalyst) onto polystyrene and silica supports is presented together with a suitable procedure for the conversion into the corresponding cyclopropenimine superbase catalysts. The activity and recyclability of polystyrene- and silica-supported cyclopropenimines were initially tested under batch conditions in a model Michael addition detecting comparable efficiencies but a superior stability of the latter heterogeneous catalyst (5 cycles, accumulated TON of 27.1). The preferred silica-supported cyclopropenimine behaved very similarly to the soluble counterpart in the reaction of glycine imine with different Michael acceptors (48-92% yield; 60-98% ee) and it could be utilized as packing material for the fabrication of fixed-bed mesoreactors (pressure-resistant stainless-steel columns). Continuous-flow experiments were performed with satisfactory long-term stability (24 h on stream) with unaltered conversion efficiency and enantioselectivity.

The polycondensation of diamines and dialdehydes promoted by an N-heterocyclic carbene (NHC) catalyst in the presence of a quinone oxidant and hexafluoro-2-propanol (HFIP) is herein presented for the synthesis of oligomeric polyamides (PAs), which are obtained with a number-average molecular weight (Mn ) in the range of 1.7-3.6 kg mol-1 as determined by NMR analysis. In particular, the utilization of furanic dialdehyde monomers (2,5-diformylfuran, DFF; 5,5'-[oxybis(methylene)]bis[2-furaldehyde], OBFA) to access known and previously unreported biobased PAs is illustrated. The synthesis of higher molecular weight PAs (poly(decamethylene terephthalamide, PA10T, Mn = 62.8 kg mol-1 ; poly(decamethylene 2,5-furandicarboxylamide, PA10F, Mn = 6.5 kg mol-1 ) by a two-step polycondensation approach is also described. The thermal properties (TGA and DSC analyses) of the synthesized PAs are reported.

Chemistry in continuous-flow continues to attract attention from the community of synthetic organic chemists due to its now well-recognized benefits including, inter alia, quick reaction times, operational safety, rapid reaction screening/optimization, enhanced automation with possible addition of in-line reaction analysis, and easy scalability. Coupling of flow chemistry to enabling technologies (e.g. unconventional solvents, supported reagents or catalysts, microwave irradiation, photochemistry, inductive heating, microreactors) as well as to additive manufacturing (AM) technologies (i.e. 3D printing) gives additional advantages for throughput and automation, and besides this, unique opportunities are offered by compartmentalization, that allows multistep syntheses to occur reconciling incompatible reaction conditions. Based on all this, continuous-flow may itself be seen as an enabling technology which leads in the direction of process intensification meeting increasingly pressing sustainability issues (e.g. waste minimization, cost/energy reduction). As part of flow chemistry, organocatalysis represents an active research area under which there is large opportunity for re-optimizing long-standing reactions or inventing new transformations. Both homogeneous (soluble) and heterogeneous (insoluble) organic molecules have been used as catalysts for continuous-flow processing in either achiral or asymmetric fashion, any issue inherent to a homogeneous approach (high catalyst loading, difficult catalyst separation) being typically overcome with the use of heterogenized organocatalysts. This review is aimed at covering the progresses on organocatalysis in continuous-flow from 2016 to early 2020, with special attention paid to the comparison between batch and flow processes for each discussed transformation to substantiate the potential of flow technology for process intensification.

Nuclear Magnetic Resonance (NMR) is an analytical technique extensively used in almost every chemical laboratory for structural identification. This technique provides statistically equivalent signals in spite of using spectrometer with different hardware features and is successfully used for the traceability and quantification of analytes in food samples. Nevertheless, to date only a few internationally agreed guidelines have been reported on the use of NMR for quantitative analysis. The main goal of the present study is to provide a methodological pipeline to assess the reproducibility of NMR data produced for a given matrix by spectrometers from different manufacturers, with different magnetic field strengths, age and hardware configurations. The results have been analyzed through a sequence of chemometric tests to generate a community-built calibration system which was used to verify the performance of the spectrometers and the reproducibility of the predicted sample concentrations.

A chiral NHC-catalyzed dearomatizing reaction of activated N-alkylpyridinium salts with aliphatic aldehydes is described. The resulting acylated 1,4-dihydropyridines have been obtained with complete C4 regioselectivity and enantioselectivities in the range 52-78% ee. The (4R)-absolute configuration of the synthesized compounds has been determined by the TD-DFT simulation of the electronic circular dichroism spectra.

The application of N-heterocyclic carbene (NHC) catalysis to the polycondensation of diols and dialdehydes under oxidative conditions is herein presented for the synthesis of polyesters using fossil-based (ethylene glycol, phthalaldehydes) and bio-based (furan derivatives, glycerol, isosorbide) monomers. The catalytic dimethyl triazolium/1,8-diazabicyclo[5.4.0]undec-7-ene couple and stoichiometric quinone oxidant afforded polyester oligomers with a number-average molecular weight (Mn ) in the range of 1.5-7.8 kg mol-1 as determined by NMR analysis. The synthesis of a higher molecular weight polyester (polyethylene terephthalate, PET) by an NHC-promoted two-step procedure via oligoester intermediates is also illustrated together with the catalyst-controlled preparation of cross-linked or linear polyesters derived from the trifunctional glycerol. The thermal properties (TGA and DSC analyses) of the synthesized oligoesters are also reported.

N-Heterocyclic carbenes (NHCs) are now well-established organocatalysts for a large number of asymmetric and non-asymmetric transformations. In the last 15 years, there has been significant interest in using NHCs in kinetic resolution (KR), dynamic kinetic resolution (DKR) and asymmetric desymmetrization reactions for the stereoselective synthesis of enantioenriched compounds, with diverse substrates and activation modes being adopted to this end. This short review brings into focus the progress made on NHC-catalyzed KR, DKR, and asymmetric desymmetrization from 2004 until December 2018. The literature discussed in this article is classified on the basis of the type of reaction involving the NHC catalyst.1 Introduction2 Acylation Strategies2.1 O-Acylation2.2 N-Acylation2.3 C-Acylation3 Aldol-Acylation Processes4 Benzoin Reactions5 Stetter Reactions6 Miscellaneous Approaches7 Conclusion

The unprecedented desymmetrization of prochiral dialdehydes catalyzed by N-heterocyclic carbenes under oxidative conditions was applied to the highly enantioselective synthesis of 1,4-dihydropyridines (DHPs) starting from 3,5-dicarbaldehyde substrates. Synthetic elaboration of the resulting 5-formyl-1,4-DHP-3-carboxylates allowed for access to the class of pharmaceutically relevant 1,4-DHP-3,5-dicarboxylates (Hantzsch esters). DFT calculations suggested that the enantioselectivity of the process is determined by the transition state involving the oxidation of the Breslow intermediate by the external quinone oxidant.

The application of the oxidative system composed of a heterogeneous triazolium pre-catalyst, iron(ii) phthalocyanine and air is described for the selective conversion of 5-hydroxymethylfurfural (HMF) into the added-value 5-hydroxymethyl-2-furancarboxylic acid (HMFCA). The disclosed one-pot two-step procedure involved sequential oxidative esterifications of HMF to afford a polyester oligomer having hydroxyl and carboxyl terminal groups (Mw = 389-1258), which in turn was hydrolyzed by a supported base (Ambersep 900 OH) to yield HMFCA in 87% overall yield. The same strategy was adopted for the effective synthesis of ester and amide derivatives of HMFCA by nucleophilic depolymerization of the oligomeric intermediate with methanol and butylamine, respectively. The utilization of the disclosed oxidative system for the direct conversion of HMF and furfural into their corresponding ester, amide, and thioester derivatives is also reported.

The design and synthesis of a set of supported azolium salt pre-catalysts is presented along with their utilization in the production of monoesters of glycerol and solketal by oxidative N-heterocyclic carbene (NHC)-catalysis through batch and continuous-flow approaches. After a propaedeutic study with soluble NHCs, the heterogeneous analogues (silica and polystyrene supports) were tested in a model monoesterification of glycerol using either the Kharasch oxidant or air (in the presence of electron transfer mediators) as the terminal oxidants. The best performing polystyrene-supported triazolium salt pre-catalyst afforded monoacylglycerols (MAGs) in high yields (up to 95%) and almost complete selectivity (monoester/diester >95 : 5) using air and the green solvent Me-THF. The synthesis of fully bio-based MAGs from furfural, 5-hydroxymethylfurfural (HMF), citronellal, and vanillin is also reported. Continuous-flow experiments have been finally performed by fabricating the corresponding packed-bed microreactor, which could be operated for ca. 120 hours with maintenance of conversion efficiency and selectivity.

The binding properties of quercetin toward chloride anions were investigated by means of ¹H-NMR, 13C-NMR, and electrospray ionization mass spectrometry (ESI-MS) measurements, as well as computational calculations. The results indicate that quercetin behaves primarily as a ditopic receptor with the binding site of the B ring that exhibits stronger chloride affinity compared to the A ring. However, these sites are stronger receptors than those of catechol and resorcinol because of their conjugation with the carbonyl group located on the C ring. The 1:1 and 1:2 complexation of this flavonoid with Cl- was also supported by ESI mass spectrometry., I.D. and P.M. acknowledge the MINECO and FEDER Program (Madrid, Spain, project CTQ2016-76155-R) and the Gobierno de Aragon (Zaragoza, Spain. Biological & Computational Chemistry Group. E34_R17).

A strategy for the immobilization of the valuable triazolium carbene Rovis catalyst onto polystyrene and silica supports is presented. Initially, the catalyst activity and recyclability were tested under batch conditions in the model stereoselective intramolecular Stetter reaction leading to optically active chromanones. Good results in terms of yield (95%) and enantioselectivity (ee 81–95%) were detected for the polystyrene-supported catalyst (10 mol %), while poorer results were collected for the silica-supported analogue. Also, continuous-flow experiments were performed by fabricating the corresponding polystyrene monolithic microreactors (pressure-resistant stainless-steel columns) to prove the benefits of the heterogeneous catalysis and the flow regime observing a high stability of the catalytic bed (48 h) with unaltered conversion efficiency and stereoselectivity.

A strategy for the synthesis of biologically relevant 5-hydroxy-imidazolidine-2-thione derivatives is presented. A novel class of α-sulfonylamines have been suitably prepared (46–81% yield) as precursors of formal benzylidenethiourea acceptors; these are generated in situ and intercepted by N-heterocyclic carbene (NHC)-activated aldehydes affording open-chain aza-benzoin-type adducts, which in turn undergo an intramolecular aza-acetalization reaction in a one-pot fashion. A thiazolium salt/triethylamine couple proved to be the more effective system to trigger the domino sequence giving the target heterocycles in good yields (45–97%) and diastereoselectivities (up to 99 : 1 dr). The multigram scale synthesis and elaboration of a selected 5-hydroxy-imidazolidine-2-thione compound is also described.

The synthesis of a small collection of novel bile acid-bisphosphonate (BA-BP) conjugates as potential drug candidates is reported. The disclosed methodology relied on the installation of azide and thiol functionalities at the head and tail positions, respectively, of the BA scaffold and its subsequent decoration by orthogonal click reactions (copper-catalyzed azide-alkyne cycloaddition, thiol-ene or thiol-yne coupling) to introduce BP units and a fluorophore. Because of the troublesome isolation of the target conjugates by standard procedures, the methodology culminated with the functionalization of the BA scaffold with a light fluorous tag to rapidly and efficiently purify intermediates and final products by fluorous solid-phase extraction.

An operationally simple one-pot, two-step procedure for the desymmetrization of benzils is herein described. This consists in the chemoselective cross-benzoin reaction of symmetrical benzils with aromatic aldehydes catalyzed by the methyl sulfinyl (dimsyl) anion, followed by microwave-assisted oxidation of the resulting benzoylated benzoins with nitrate, avoiding the costly isolation procedure. Both electron-withdrawing and electron-donating substituents may be accommodated on the aromatic rings of the final unsymmetrical benzil.

Prostate cancer (PC) represents the most common type of cancer among males and is the second leading cause of cancer death in men in Western society. Current options for PC therapy remain unsatisfactory, since they often produce uncomfortable long-term side effects, such as impotence (70%) and incontinence (5–20%) even in the first stages of the disease. Light-triggered therapies, such as photodynamic therapy, have the potential to provide important advances in the treatment of localized and partially metastasized prostate cancer. We have designed a novel molecular conjugate (DR2) constituted of a photosensitizer (pheophorbide a, Pba), connected to a nonsteroidal anti-androgen molecule through a small pegylated linker. This study aims at investigating whether DR2 represents a valuable approach for PC treatment based on light-induced production of single oxygen and nitric oxide (NO) in vitro. Besides being able to efficiently bind the androgen receptor (AR), the 2-trifluoromethylnitrobenzene ring on the DR2 backbone is able to release cytotoxic NO under the exclusive control of light, thus augmenting the general photodynamic effect. Although DR2 is similarly internalized in cells expressing different levels of androgen receptor, the AR ligand prevents its efflux through the ABCG2-pump. In vitro phototoxicity experiments demonstrated the ability of DR2 to kill cancer cells more efficiently than Pba, while no dark toxicity was observed. Overall, the presented approach is very promising for further development of AR-photosensitizer conjugates in the multimodal photodynamic treatment of prostate cancer.

A convenient heterogeneous continuous-flow procedure for the polarity reversal of aromatic α-diketones is presented. Propaedeutic batch experiments have been initially performed to select the optimal supported base capable to initiate the two electron-transfer process from the carbamoyl anion of the N,N-dimethylformamide (DMF) solvent to the α-diketone and generate the corresponding enediolate active species. After having identified the 2-tert-butylimino-2-diethylamino-1,3-dimethylperhydro-1,3,2-diazaphosphorine on polystyrene (PS-BEMP) as the suitable base, packed-bed microreactors (pressure-resistant stainless-steel columns) have been fabricated and operated to accomplish the chemoselective synthesis of aroylated α-hydroxy ketones and 2-benzoyl-1,4-diones (benzoin- and Stetter-like products, respectively) with a good level of efficiency and with a long-term stability of the packing material (up to five days).

The condensation of aromatic alpha-diketones (benzils) with aromatic aldehydes ( benzoin-type reaction) and chalcones ( Stetter-type reaction) in DMF in the presence of catalytic ( 25 mol%) KOtBu is reported. Both types of umpolung processes proceed with good efficiency and complete chemoselectivity. On the basis of spectroscopic evidence ( MS analysis) of plausible intermediates and literature reports, the occurrence of different ionic pathways have been evaluated to elucidate the mechanism of a model cross-benzoinlike reaction along with a radical route initiated by an electron-transfer process to benzil from the carbamoyl anion derived from DMF. This mechanistic investigation has culminated in a different proposal, supported by calculations and a trapping experiment, based on double electron-transfer to benzil with formation of the corresponding enediolate anion as the key reactive intermediate. A mechanistic comparison between the activation modes of benzils in KOtBu-DMF and KOtBu-DMSO systems is also described.

Depending on the substitution pattern some products are obtained as mixtures of diastereomers.

The flavonoid quercetin (3,3′,4′,5,7-pentahydroxyflavone) is widely distributed in plants, foods, and beverages. This polyphenol compound exhibits varied biological actions such as antioxidant, radical-scavenging, anti-inflammatory, antibacterial, antiviral, gastroprotective, immune-modulator, and finds also application in the treatment of obesity, cardiovascular diseases and diabetes. Besides, quercetin can prevent neurological disorders and exerts protection against mitochondrial damages. Various in vitro studies have assessed the anticancer effects of quercetin, although there are no conclusive data regarding its mode of action. However, low bioavailability, poor aqueous solubility as well as rapid body clearance, fast metabolism and enzymatic degradation hamper the use of quercetin as therapeutic agent, so intense research efforts have been focused on the modification of the quercetin scaffold to obtain analogs with potentially improved properties for clinical applications. This review gives an overview of the developments in the synthesis and anticancer-related activities of quercetin derivatives reported from 2012 to 2016.

Deprotonation of DMSO with catalytic amounts of KOtBu generates methylsulfinyl carbanions in situ.

The hitherto unreported ability of the methylsulfinyl carbanion (dimsyl anion) to generate acyl anion equivalents is described. The dimsyl anion, in fact, efficiently catalyzes chemoselective in- termolecular cross-benzoin condensations of diaryl a-diketones (benzils) with various aromatic and ali- phatic aldehydes to give the corresponding aryl-aryl and aryl-alkyl benzoin benzoates in an atom-eco- nomic fashion. The dimsyl anion acts as an environ- mentally friendly alternative to the toxic cyanide anion and it is obtained by in situ deprotonation of dimethyl sulfoxide (DMSO) solvent with a catalytic amount of a strong base, potassium tert-butoxide (t- BuOK) the optimal promoter. The assumption that the methylsulfinyl carbanion is the active catalyst in the title transformation is supported by electrospray ionization mass spectrometry (ESI-MS) experiments.

Thiazolium salt pre-catalysts have been immobilized on silica and monolithic polystyrene and their activity was tested under batch conditions in three model umpolung reactions, namely the benzoin condensation of benzaldehyde, the acyloin-type condensation of biacetyl, and the Stetter reaction of biacetyl with trans-chalcone. A prerequisite of the study has been the utilization of environmentally benign water and ethanol solvents. After having established the higher performance of polystyrene monolithic thiazolium carbene catalysts, their effectiveness has been tested under the flow regime by fabricating the corresponding monolithic microreactors (pressure-resistant stainless-steel columns). Importantly, it has been demonstrated by a brief substrate scope study that the polymeric matrix and the continuous flow regime synergistically contribute to preserve the activity of the carbene catalysts over time, thus permitting the long-term operation (up to 7 days) of the prepared monolithic reactors for the production of valuable compounds via the umpolung strategy.