Search

In this work, we have described the synthesis of vanadium (V) nanoparticles (NPs) anchored on mesoporous graphitic carbon nitride (V@mpg-C 3 N 4 ) and their uses in photocatalytic ethylbenzene oxidation to the respective acetophenones. The mpg-C 3 N 4 serves as the support for the decoration of V NPs, through a simple impregnation method. Various advanced techniques, such as XRD, UV-vis spectrometry, HRTEM, HAADF-STEM, AC-STEM, elemental mapping, and BET surface area analysis, were employed for the characterization of V@mpg-C 3 N 4 . The detailed characterization studies reveal that the V@mpg-C 3 N 4 catalyst has a medium band gap (2.78 eV), a high surface area (76.7 m 2 g -1 ), and a mesoporous nature. The V@mpg-C 3 N 4 photocatalysts demonstrated excellent performance in the light-assisted oxidation of ethylbenzene, achieving over 99 % conversion and selectivity for acetophenone in an environmentally friendly solvent (water) using a domestic light source (50 W white light). This developed synthesis strategy will be useful for synthesizing various noble and non-noble metal-based catalysts and their applications in organic transformation and environmental remediation., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Platinum exhibits desirable catalytic properties, but it is scarce and expensive. Optimizing its use in key applications such as emission control catalysis is important to reduce our reliance on such a rare element. Supported Pt nanoparticles (NPs) used in emission control systems deactivate over time because of particle growth in sintering processes. In this work, we shed light on the stability against sintering of Pt NPs supported on and encapsulated in Al 2 O 3 using a combination of nanocrystal catalysts and atomic layer deposition (ALD) techniques. We find that small amounts of alumina overlayers created by ALD on preformed Pt NPs can stabilize supported Pt catalysts, significantly reducing deactivation caused by sintering, as previously observed by others. Combining theoretical and experimental insights, we correlate this behavior to the decreased propensity of oxidized Pt species to undergo Ostwald ripening phenomena because of the physical barrier imposed by the alumina overlayers. Furthermore, we find that highly stable catalysts can present an abundance of under-coordinated Pt sites after restructuring of both Pt particles and alumina overlayers at a high temperature (800 °C) in C 3 H 6 oxidation conditions. The enhanced stability significantly improves the Pt utilization efficiency after accelerated aging treatments, with encapsulated Pt catalysts reaching reaction rates more than two times greater than those of a control supported Pt catalyst.

The formation mechanism(s) of high-index facets in metal oxides is not widely understood but remains a topic of interest owing to the challenges of stabilizing high-energy surfaces. These metal oxide crystal surfaces are expected to provide unique physicochemical characteristics; therefore, understanding crystallization pathways may enable the rational design of materials with controlled properties. Here the crystallization of NiO via thermal decomposition of a nickel source in excess of alkali chlorides is examined, focusing on KCl, which produces trapezohedral NiO (311) particles that are difficult to achieve through alternative methods. Trapezohedral NiO crystals are confirmed to grow via a molten eutectic where NiO nucleation is followed by nonclassical crystallization through processes resembling colloidal assembly. Aggregates comprised of NiO nanocrystals form mesostructures that ripen with heating time and exhibit fewer grain boundaries as they transition into single-crystalline particles. At temperatures higher than those of NiO crystallization, there is a restructuring of (311) facets into microfacets exposing (111) and (100) surfaces. These findings illustrate the complex crystallization processes taking place during molten salt synthesis. The ability to generate metal oxide particles with high-index facets has the potential to be a more generalized approach to unlock the physicochemical properties of materials for diverse applications., (© 2024 Wiley‐VCH GmbH.)

Identification of active sites in catalytic materials is important and helps establish approaches to the precise design of catalysts for achieving high reactivity. Generally, active sites of conventional heterogeneous catalysts can be single atom, nanoparticle or a metal/oxide interface. Herein, we report that metal/oxide reverse interfaces can also be active sites which are created from the coordinated migration of metal and oxide atoms. As an example, a Pd 1 /CeO 2 single-atom catalyst prepared via atom trapping, which is otherwise inactive at 30 °C, is able to completely oxidize formaldehyde after steam treatment. The enhanced reactivity is due to the formation of a Ce 2 O 3 -Pd nanoparticle domain interface, which is generated by the migration of both Ce and Pd atoms on the atom-trapped Pd 1 /CeO 2 catalyst during steam treatment. We show that the generation of metal oxide-metal interfaces can be achieved in other heterogeneous catalysts due to the coordinated mobility of metal and oxide atoms, demonstrating the formation of a new active interface when using metal single-atom material as catalyst precursor., (© 2024. The Author(s).)

Olefin oligomerization by γ-Al 2 O 3 has recently been reported, and it was suggested that Lewis acid sites are catalytic. The goal of this study is to determine the number of active sites per gram of alumina to confirm that Lewis acid sites are indeed catalytic. Addition of an inorganic Sr oxide base resulted in a linear decrease in the propylene oligomerization conversion at loadings up to 0.3 wt %; while, there is a >95 % loss in conversion above 1 wt % Sr. Additionally, there was a linear decrease in the intensity of the Lewis acid peaks of absorbed pyridine in the IR spectra with an increase in Sr loading, which correlates with the loss in propylene conversion, suggesting that Lewis acid sites are catalytic. Characterization of the Sr structure by XAS and STEM indicates that single Sr 2+ ions are bound to the γ-Al 2 O 3 surface and poison one catalytic site per Sr ion. The maximum loading needed to poison all catalytic sites, assuming uniform surface coverage, was ∼0.4 wt % Sr, giving an acid site density of ∼0.2 sites per nm 2 of γ-Al 2 O 3 , or approximately 3 % of the alumina surface., (© 2023 The Authors. ChemPhysChem published by Wiley-VCH GmbH.)

Single atoms of platinum group metals on CeO 2 represent a potential approach to lower precious metal requirements for automobile exhaust treatment catalysts. Here we show the dynamic evolution of two types of single-atom Pt (Pt 1 ) on CeO 2 , i.e., adsorbed Pt 1 in Pt/CeO 2 and square planar Pt 1 in Pt AT CeO 2 , fabricated at 500 °C and by atom-trapping method at 800 °C, respectively. Adsorbed Pt 1 in Pt/CeO 2 is mobile with the in situ formation of few-atom Pt clusters during CO oxidation, contributing to high reactivity with near-zero reaction order in CO. In contrast, square planar Pt 1 in Pt AT CeO 2 is strongly anchored to the support during CO oxidation leading to relatively low reactivity with a positive reaction order in CO. Reduction of both Pt/CeO 2 and Pt AT CeO 2 in CO transforms Pt 1 to Pt nanoparticles. However, both catalysts retain the memory of their initial Pt 1 state after reoxidative treatments, which illustrates the importance of the initial single-atom structure in practical applications., (© 2023. The Author(s).)

A single-atom Pt 1 /CeO 2 catalyst formed by atom trapping (AT, 800 °C in air) shows excellent thermal stability but is inactive for CO oxidation at low temperatures owing to over-stabilization of Pt 2+ in a highly symmetric square-planar Pt 1 O 4 coordination environment. Reductive activation to form Pt nanoparticles (NPs) results in enhanced activity; however, the NPs are easily oxidized, leading to drastic activity loss. Herein we show that tailoring the local environment of isolated Pt 2+ by thermal-shock (TS) synthesis leads to a highly active and thermally stable Pt 1 /CeO 2 catalyst. Ultrafast shockwaves (>1200 °C) in an inert atmosphere induced surface reconstruction of CeO 2 to generate Pt single atoms in an asymmetric Pt 1 O 4 configuration. Owing to this unique coordination, Pt 1 δ+ in a partially reduced state dynamically evolves during CO oxidation, resulting in exceptional low-temperature performance. CO oxidation reactivity on the Pt 1 /CeO 2 _TS catalyst was retained under oxidizing conditions., (© 2021 Wiley-VCH GmbH.)

Single-atom catalysts (SACs) have attracted extensive attention in fields related to energy, environment, and material sciences because of the high atom efficiency and the unique properties of these materials. Many approaches have hitherto been successfully established to prepare SACs, including impregnation, pyrolysis-involved processes, atom trapping, and coprecipitation. However, under typical reaction conditions, single atoms on catalysts tend to migrate or agglomerate, forming nanoclusters or nanoparticles, which lowers their surface free energy. Efforts are required to develop strategies for improving the thermal stability of SACs while achieving excellent catalytic performance. In this Progress Report, recent advances in the development of thermally durable single-atom heterogeneous catalysts are discussed. Several important preparation approaches for thermally stable SACs are described in this article. Fundamental understanding of the coordination structures of thermally stable single atom prepared by these methods is discussed. Furthermore, the catalytic performances of these thermally stable SACs are reviewed, including their activity and stability. Finally, a perspective of this important and rapidly evolving research field is provided., (© 2021 Wiley-VCH GmbH.)

Advances in engine technologies are placing additional demands on emission control catalysts, which must now perform at lower temperatures, but at the same time be robust enough to survive harsh conditions encountered in engine exhaust. In this Review, we explore some of the materials concepts that could revolutionize the technology of emission control systems. These include single-atom catalysts, two-dimensional materials, three-dimensional architectures, core@shell nanoparticles derived via atomic layer deposition and via colloidal synthesis methods, and microporous oxides. While these materials provide enhanced performance, they will need to overcome many challenges before they can be deployed for treating exhaust from cars and trucks. We assess the state of the art for catalysing reactions related to emission control and also consider radical breakthroughs that could potentially completely transform this field., (© 2020. Springer Nature Limited.)

Metal oxides exposing high-index facets are potentially impactful in catalysis and adsorption processes owing to under-coordinated ions and polarities that alter their interfacial properties compared to low-index facets. Here, we report molten-salt syntheses of NiO particles exposing a variety of crystal facets. We show that for a given anion (nitrate or chloride), the alkali cation has a notable impact on the formation of crystals exposing {311}, {611}, {100}, and {111} faces. Based on a parametric analysis of synthesis conditions, we postulate that the crystallization mechanism is governed by the formation of growth units consisting of Ni II complexes whose coordination numbers are determined by temperature and the selection of anion (associated to the coordination sphere) and alkali cation (associated with the outer coordination sphere). Notably, our findings reveal that high-index facets are particularly favored in chloride media and are stable under prolonged periods of catalysis and steaming., (© 2020 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Protocols for conducting in situ transmission electron microscopy (TEM) reactions using an environmental TEM with dry gases have been well established. However, many important reactions that are relevant to catalysis or high-temperature oxidation occur at atmospheric pressure and are influenced by the presence of water vapor. These experiments necessitate using a closed-cell gas reaction TEM holder. We have developed protocols for introducing and controlling water vapor concentrations in experimental gases from 2% at a full atmosphere to 100% at ~17 Torr, while measuring the gas composition using a residual gas analyzer (RGA) on the return side of the in situ gas reactor holder. Initially, as a model system, cube-shaped MgO crystals were used to help develop the protocols for handling the water vapor injection process and confirming that we could successfully inject water vapor into the gas cell. The interaction of water vapor with MgO triggered surface morphological and chemical changes as a result of the formation of Mg(OH)2, later validated with mass spectra obtained with our RGA system with and without water vapor. Integrating an RGA with an in situ scanning/TEM closed-cell gas reaction system can thus provide critical measurements correlating gas composition with dynamic surface restructuring of materials during reactions.

In this work, we compare the CO oxidation performance of Pt single atom catalysts (SACs) prepared via two methods: (1) conventional wet chemical synthesis (strong electrostatic adsorption-SEA) with calcination at 350 °C in air; and (2) high temperature vapor phase synthesis (atom trapping-AT) with calcination in air at 800 °C leading to ionic Pt being trapped on the CeO 2 in a thermally stable form. As-synthesized, both SACs are inactive for low temperature (<150 °C) CO oxidation. After treatment in CO at 275 °C, both catalysts show enhanced reactivity. Despite similar Pt metal particle size, the AT catalyst is significantly more active, with onset of CO oxidation near room temperature. A combination of near-ambient pressure X-ray photoelectron spectroscopy (NAP-XPS) and CO temperature-programmed reduction (CO-TPR) shows that the high reactivity at low temperatures can be related to the improved reducibility of lattice oxygen on the CeO 2 support.

To improve fuel efficiency, advanced combustion engines are being designed to minimize the amount of heat wasted in the exhaust. Hence, future generations of catalysts must perform at temperatures that are 100°C lower than current exhaust-treatment catalysts. Achieving low-temperature activity, while surviving the harsh conditions encountered at high engine loads, remains a formidable challenge. In this study, we demonstrate how atomically dispersed ionic platinum (Pt 2+ ) on ceria (CeO 2 ), which is already thermally stable, can be activated via steam treatment (at 750°C) to simultaneously achieve the goals of low-temperature carbon monoxide (CO) oxidation activity while providing outstanding hydrothermal stability. A new type of active site is created on CeO 2 in the vicinity of Pt 2+ , which provides the improved reactivity. These active sites are stable up to 800°C in oxidizing environments., (Copyright © 2017 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works.)

Ceria-supported Pd is a promising heterogeneous catalyst for CO oxidation relevant to environmental cleanup reactions. Pd loaded onto a nanorod form of ceria exposing predominantly (111) facets is already active at 50 °C. Here we report a combination of CO-FTIR spectroscopy and theoretical calculations that allows assigning different forms of Pd on the CeO 2 (111) surface during reaction conditions. Single Pd atoms stabilized in the form of PdO and PdO 2 in a CO/O 2 atmosphere participate in a catalytic cycle involving very low activation barriers for CO oxidation. The presence of single Pd atoms on the Pd/CeO 2 -nanorod, corroborated by aberration-corrected TEM and CO-FTIR spectroscopy, is considered pivotal to its high CO oxidation activity.

Ceria (CeO 2 ) supports are unique in their ability to trap ionic platinum (Pt), providing exceptional stability for isolated single atoms of Pt. The reactivity and stability of single-atom Pt species was explored for the industrially important light alkane dehydrogenation reaction. The single-atom Pt/CeO 2 catalysts are stable during propane dehydrogenation, but are not selective for propylene. DFT calculations show strong adsorption of the olefin produced, leading to further unwanted reactions. In contrast, when tin (Sn) is added to CeO 2 , the single-atom Pt catalyst undergoes an activation phase where it transforms into Pt-Sn clusters under reaction conditions. Formation of small Pt-Sn clusters allows the catalyst to achieve high selectivity towards propylene because of facile desorption of the product. The CeO 2 -supported Pt-Sn clusters are very stable, even during extended reaction at 680 °C. Coke formation is almost completely suppressed by adding water vapor to the feed. Furthermore, upon oxidation the Pt-Sn clusters readily revert to the atomically dispersed species on CeO 2 , making Pt-Sn/CeO 2 a fully regenerable catalyst., (© 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Catalytic oxidation of alcohols often requires the presence of expensive transition metals. Herein, it is shown that earth-abundant Fe atoms dispersed throughout a nitrogen-containing carbon matrix catalyze the oxidation of benzyl alcohol and 5-hydroxymethylfurfural by O 2 in the aqueous phase. The activity of the catalyst can be regenerated by a mild treatment in H 2 . An observed kinetic isotope effect indicates that β-H elimination from the alcohol is the kinetically relevant step in the mechanism, which can be accelerated by substituting Fe with Cu. Dispersed Cr, Co, and Ni also convert alcohols, demonstrating the general utility of metal-nitrogen-carbon materials for alcohol oxidation catalysis. Oxidation of aliphatic alcohols is substantially slower than that of aromatic alcohols, but addition of 2,2,6,6-tetramethyl-1-piperidinyloxy as a co-catalyst with Fe can significantly improve the reaction rate., (© 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Catalysts based on single atoms of scarce precious metals can lead to more efficient use through enhanced reactivity and selectivity. However, single atoms on catalyst supports can be mobile and aggregate into nanoparticles when heated at elevated temperatures. High temperatures are detrimental to catalyst performance unless these mobile atoms can be trapped. We used ceria powders having similar surface areas but different exposed surface facets. When mixed with a platinum/aluminum oxide catalyst and aged in air at 800°C, the platinum transferred to the ceria and was trapped. Polyhedral ceria and nanorods were more effective than ceria cubes at anchoring the platinum. Performing synthesis at high temperatures ensures that only the most stable binding sites are occupied, yielding a sinter-resistant, atomically dispersed catalyst., (Copyright © 2016, American Association for the Advancement of Science.)

Alumina-supported Pt is one of the major industrial catalysts for light alkane dehydrogenation. This catalyst loses activity during reaction, with coke formation often considered as the reason for deactivation. As we show in this study, the amount and nature of carbon deposits do not directly correlate with the loss of activity. Rather, it is the transformation of subnanometer Pt species into larger Pt nanoparticles that appears to be responsible for the loss of catalytic activity. Surprisingly, a portion of the Sn remains atomically dispersed on the alumina surface in the spent catalyst and helps in the redispersion of the Pt. In the absence of Sn on the alumina support, the larger Pt nanoparticles formed during reaction are not redispersed during oxidative regeneration. It is known that Sn is added as a promoter in the industrial catalyst to help in achieving high propene selectivity and to minimize coke formation. This work shows that an important role of Sn is to help in the regeneration of Pt, by providing nucleation sites on the alumina surface. Aberration-corrected scanning transmission electron microscopy helps to provide unique insights into the operating characteristics of an industrially important catalyst by demonstrating the role of promoter elements, such as Sn, in the oxidative regeneration of Pt on γ-Al 2 O 3 .

Conversion of biomass-derived molecules involves catalytic reactions under harsh conditions in the liquid phase (e.g., temperatures of 250 °C and possibly under either acidic or basic conditions). Conventional oxide-supported catalysts undergo pore structure collapse and surface area reduction leading to deactivation under these conditions. Here we demonstrate an approach to deposit graphitic carbon to protect the oxide surface. The heterogeneous catalysts supported on the graphitic carbon/oxide composite exhibit excellent stability (even under acidic conditions) for biomass conversion reactions., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Catalysis by single isolated atoms of precious metals has attracted much recent interest, as it promises the ultimate in atom efficiency. Most previous reports are on reducible oxide supports. Here we show that isolated palladium atoms can be catalytically active on industrially relevant γ-alumina supports. The addition of lanthanum oxide to the alumina, long known for its ability to improve alumina stability, is found to also help in the stabilization of isolated palladium atoms. Aberration-corrected scanning transmission electron microscopy and operando X-ray absorption spectroscopy confirm the presence of intermingled palladium and lanthanum on the γ-alumina surface. Carbon monoxide oxidation reactivity measurements show onset of catalytic activity at 40 °C. The catalyst activity can be regenerated by oxidation at 700 °C in air. The high-temperature stability and regenerability of these ionic palladium species make this catalyst system of potential interest for low-temperature exhaust treatment catalysts.

Pt is an active catalyst for diesel exhaust catalysis but is known to sinter and form large particles under oxidizing conditions. Pd is added to improve the performance of the Pt catalysts. To investigate the role of Pd, we introduced metallic Pt nanoparticles via physical vapor deposition to a sample containing PdO nanoparticles. When the catalyst was aged in air, the Pt particles disappeared, and the Pt was captured by the PdO, forming bimetallic Pt-Pd nanoparticles. The formation of metallic Pt-Pd alloys under oxidizing conditions is indeed remarkable but is consistent with bulk thermodynamics. The results show that mobile Pt species are effectively trapped by PdO, representing a novel mechanism by which Ostwald ripening is slowed down. The results have implications for the development of sinter-resistant catalysts and help explain the improved performance and durability of Pt-Pd in automotive exhaust catalytic converters.

Aberration-corrected transmission electron microscopy and high-angle annular dark field imaging was used to investigate the surface structures and internal defects of CeO2 nanoparticles (octahedra, rods, and cubes). Further, their catalytic reactivity in the water-gas shift (WGS) reaction and the exposed surface sites by using FTIR spectroscopy were tested. Rods and octahedra expose stable (111) surfaces whereas cubes have primarily (100) facets. Rods also had internal voids and surface steps. The exposed planes are consistent with observed reactivity patterns, and the normalized WGS reactivity of octahedra and rods were similar, but the cubes were more reactive. In situ FTIR spectroscopy showed that rods and octahedra exhibit similar spectra for -OH groups and that carbonates and formates formed upon exposure to CO whereas for cubes clear differences were observed. These results provide definitive information on the nature of the exposed surfaces in these CeO2 nanostructures and their influence on the WGS reactivity., (Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Metal nanoparticles contain the active sites in heterogeneous catalysts, which are important for many industrial applications including the production of clean fuels, chemicals and pharmaceuticals, and the cleanup of exhaust from automobiles and stationary power plants. Sintering, or thermal deactivation, is an important mechanism for the loss of catalyst activity. This is especially true for high temperature catalytic processes, such as steam reforming, automotive exhaust treatment, or catalytic combustion. With dwindling supplies of precious metals and increasing demand, fundamental understanding of catalyst sintering is very important for achieving clean energy and a clean environment, and for efficient chemical conversion processes with atom selectivity. Scientists have proposed two mechanisms for sintering of nanoparticles: particle migration and coalescence (PMC) and Ostwald ripening (OR). PMC involves the mobility of particles in a Brownian-like motion on the support surface, with subsequent coalescence leading to nanoparticle growth. In contrast, OR involves the migration of adatoms or mobile molecular species, driven by differences in free energy and local adatom concentrations on the support surface. In this Account, we divide the process of sintering into three phases. Phase I involves rapid loss in catalyst activity (or surface area), phase II is where sintering slows down, and phase III is where the catalyst may reach a stable performance. Much of the previous work is based on inferences from catalysts that were observed before and after long term treatments. While the general phenomena can be captured correctly, the mechanisms cannot be determined. Advancements in the techniques of in situ TEM allow us to observe catalysts at elevated temperatures under working conditions. We review recent evidence obtained via in situ methods to determine the relative importance of PMC and OR in each of these phases of catalyst sintering. The evidence suggests that, in phase I, OR is responsible for the rapid loss of activity that occurs when particles are very small. Surprisingly, very little PMC is observed in this phase. Instead, the rapid loss of activity is caused by the disappearance of the smallest particles. These findings are in good agreement with representative atomistic simulations of sintering. In phase II, sintering slows down since the smallest particles have disappeared. We now see a combination of PMC and OR, but do not fully understand the relative contribution of each of these processes to the overall rates of sintering. In phase III, the particles have grown large and other parasitic phenomena, such as support restructuring, can become important, especially at high temperatures. Examining the evolution of particle size and surface area with time, we do not see a stable or equilibrium state, especially for catalysts operating at elevated temperatures. In conclusion, the recent literature, especially on in situ studies, shows that OR is the dominant process causing the growth of nanoparticle size. Consequently, this leads to the loss of surface area and activity. While particle migration could be controlled through suitable structuring of catalyst supports, it is more difficult to control the mobility of atomically dispersed species. These insights into the mechanisms of sintering could help to develop sinter-resistant catalysts, with the ultimate goal of designing catalysts that are self-healing.

The effect of Zn on the CO adsorption and oxidation reaction is examined experimentally and theoretically on two PdZn catalysts with different compositions, namely the intermetallic 1:1 β-PdZn and α-PdZn as a solid solution of 9 at% Zn in Pd. These bimetallic catalysts, made using an aerosol derived method, are homogeneous in phase and composition so that the measured reactivity excludes support effects. Both specific reactivities for CO oxidation on these two PdZn catalysts were measured. It was found that the initial rates are high and different between these catalysts, presumably due to the weakening of the CO adsorption and easier binding of oxygen to Pd sites modified by Zn. However, the rates decrease with time and become comparable to that on Pd at the steady state. With the help of density functional theory, it was suggested that the transient kinetics are due to the oxidation of Zn during the catalysis, which yields pure Pd where the reaction takes place.

Research interest in bimetallic catalysts is mainly due to their tunable chemical/physical properties by a number of parameters like composition and morphostructure. In catalysis, numerous bimetallic catalysts have been shown to exhibit unique properties which are distinct from those of their monometallic counterparts. To meet the growing energy demand while mitigating the environmental concerns, numerous endeavors have been made to seek green and sustainable energy resources, among which hydrogen has been identified as the most promising one with bimetallic catalysts playing important roles. This tutorial review intends to summarize recent progress in bimetallic catalysts for hydrogen production, specifically focusing on that of reforming technologies as well as the relevant processes like water-gas shift (WGS) and CO preferential oxidation (PROX), and emphasizing on the fundamental understanding of the nature of catalytic sites responsible for generating high purity hydrogen and minimizing carbon monoxide formation. Meanwhile, some important synthesis and characterization methods of bimetallic catalysts developed so far are also summarized.

A simple and inexpensive approach is used to coat metal oxide surfaces (SBA-15) with thin films of carbon. These carbon films provide improved hydrothermal stability to oxides, such as silica and alumina, which are not otherwise stable at elevated temperatures in the presence of liquid water. Furthermore, the carbon film changes the surface chemistry of the support., (Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The thermal stability of inverse micelle prepared Pt nanoparticles (NPs) supported on nanocrystalline γ-Al(2)O(3) was monitored in situ under different chemical environments (H(2), O(2), H(2)O) via extended X-ray absorption fine-structure spectroscopy (EXAFS) and ex situ via scanning transmission electron microscopy (STEM). Drastic differences in the stability of identically synthesized NP samples were observed upon exposure to two different pre-treatments. In particular, exposure to O(2) at 400 °C before high temperature annealing in H(2) (800 °C) was found to result in the stabilization of the inverse micelle prepared Pt NPs, reaching a maximum overall size after moderate coarsening of ∼1 nm. Interestingly, when an analogous sample was pre-treated in H(2) at ∼400 °C, a final size of ∼5 nm was reached at 800 °C. The beneficial role of oxygen in the stabilization of small Pt NPs was also observed in situ during annealing treatments in O(2) at 450 °C for several hours. In particular, while NPs of 0.5 ± 0.1 nm initial average size did not display any significant sintering (0.6 ± 0.2 nm final size), an analogous thermal treatment in hydrogen leads to NP coarsening (1.2 ± 0.3 nm). The same sample pre-dosed and annealed in an atmosphere containing water only displayed moderate sintering (0.8 ± 0.3 nm). Our data suggest that PtO(x) species, possibly modifying the NP/support interface, play a role in the stabilization of small Pt NPs. Our study reveals the enhanced thermal stability of inverse micelle prepared Pt NPs and the importance of the sample pre-treatment and annealing environment in the minimization of undesired sintering processes affecting the catalytic performance of nanosized particles.

Sintering of nanoparticles (NPs) of Ni supported on MgAl(2)O(4) was monitored in situ using transmission electron microscopy (TEM) during exposure to an equimolar mixture of H(2) and H(2)O at a pressure of 3.6 mbar at 750 °C, conditions relevant to methane steam reforming. The TEM images revealed an increase in the mean particle size due to disappearance of smaller, immobile NPs and the resultant growth of the larger NPs. A new approach for predicting the long-term sintering of NPs is presented wherein microscopic observations of the ripening of individual NPs (over a span of a few seconds) are used to extract energetic parameters that allow a description of the collective behavior of the entire population of NPs (over several tens of minutes)., (© 2011 American Chemical Society)

The effect of zinc promotion on the oxidation state of cobalt in Co/ZrO(2) catalysts was investigated and correlated with the activity and selectivity for ethanol steam reforming (ESR). Catalysts were synthesized by applying incipient wetness impregnation and characterized by using Brunauer-Emmett-Teller (BET), temperature-programmed reduction (TPR) measurements, X-ray diffraction (XRD), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). Higher ethanol conversion and lower CH(4) selectivity are observed for the Co/ZrO(2) catalyst promoted with Zn as compared to the Co/ZrO(2) catalyst alone. Addition of Zn inhibits the oxidation of metallic cobalt (Co(0) ) particles and results in a higher ratio of Co(0) /Co(2+) in the Zn-promoted Co/ZrO(2) catalyst. These results suggest that metallic cobalt (Co(0) ) is more active than Co(2+) in the ethanol conversion through dehydrogenation and that Co(2+) may play a role in the CH(4) formation. TPR measurements, on the other hand, reveal that Zn addition inhibits the reduction of Co(2+) and Co(3+) , which would lead to the false conclusion that oxidized Co is required to reduce the CH(4) formation. Therefore, TPR measurements may not be appropriate to correlate the degree of metal reducibility (in this case Co(0)) with the catalyst activity for reactions, such as ESR, where oxidizing conditions exist., (Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A ReO(x)-promoted Rh/C catalyst is shown to be selective in the hydrogenolysis of secondary C-O bonds for a broad range of cyclic ethers and polyols, these being important classes of compounds in biomass-derived feedstocks. Experimentally observed reactivity trends, NH(3) temperature-programmed desorption (TPD) profiles, and results from theoretical calculations based on density functional theory (DFT) are consistent with the hypothesis of a bifunctional catalyst that facilitates selective hydrogenolysis of C-O bonds by acid-catalyzed ring-opening and dehydration reactions coupled with metal-catalyzed hydrogenation. The presence of surface acid sites on 4 wt % Rh-ReO(x)/C (1:0.5) was confirmed by NH(3) TPD, and the estimated acid site density and standard enthalpy of NH(3) adsorption were 40 μmol g(-1) and -100 kJ mol(-1), respectively. Results from DFT calculations suggest that hydroxyl groups on rhenium atoms associated with rhodium are acidic, due to the strong binding of oxygen atoms by rhenium, and these groups are likely responsible for proton donation leading to the formation of carbenium ion transition states. Accordingly, the observed reactivity trends are consistent with the stabilization of resulting carbenium ion structures that form upon ring-opening or dehydration. The presence of hydroxyl groups that reside α to carbon in the C-O bond undergoing scission can form oxocarbenium ion intermediates that significantly stabilize the resulting transition states. The mechanistic insights from this work may be extended to provide a general description of a new class of bifunctional heterogeneous catalysts, based on the combination of a highly reducible metal with an oxophilic metal, for the selective C-O hydrogenolysis of biomass-derived feedstocks.

An improved, exact analysis of surface Ostwald ripening of a collection of nanoparticles is presented in an effort to redefine the critical radius involved in the kinetic models of ripening. In a collection of supported particles of different sizes, the critical radius is the size of the particle that is in equilibrium with the surrounding adatom concentration. Such a particle neither grows nor shrinks due to Ostwald ripening, whereas larger particles grow and smaller particles shrink. We show that previous definitions of critical radius are applicable only for limiting regimes where the Kelvin equation has been linearized. We propose a more universally applicable definition of critical radius that satisfies the constraints of mass balance.

The selectivity towards CO2 during steam reforming of methanol on Pd increases in the order Al2O3 < ZrO2 < ZnO. However, conventional catalyst preparation can damage the ZnO surface, even causing complete dissolution. The faceted, prismatic ZnO crystals in the support (Aldrich) get easily destroyed during catalyst preparation. We show in this work that, by using organic precursors, the faceted ZnO particles can be preserved. The role of ZnO morphology on reactivity for methanol steam reforming (MSR) is explored. Since the MSR reactivity and selectivity is also a function of the particle size of the nanoparticles as well as the presence of the PdZn ordered alloy phase, we have controlled for both these parameters to derive the true influence of the support. We find that the catalyst prepared from an organic precursor is more active than one prepared from acidic precursors, despite having similar particle size and extent of bulk PdZn ordered alloy formation. The results suggest that preserving certain ZnO surfaces is beneficial, and the ZnO support may play an important role in the overall reaction of methanol steam reforming.

Electron energy loss spectroscopy (EELS), X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy have been used to study iron catalysts for Fischer-Tropsch synthesis. When silica-containing iron oxide precursors are activated in flowing CO, the iron phase segregates into iron carbide crystallites, leaving behind some unreduced iron oxide in an amorphous state coexisting with the silica binder. The iron carbide crystallites are found covered by characteristic amorphous carbonaceous surface layers. These amorphous species are difficult to analyze by traditional catalyst characterization techniques, which lack spatial resolution. Even a surface-sensitive technique such as XPS shows only broad carbon or iron peaks in these catalysts. As we show in this work, EELS allows us to distinguish three different carbonaceous species: reactive amorphous carbon, graphitic carbon, and carbidic carbon in the bulk of the iron carbide particles. The carbidic carbon K edge shows an intense "pi*" peak with an edge shift of about 1 eV to higher energy loss compared to that of the pi* of amorphous carbon film or graphitic carbon. EELS analysis of the oxygen K edge allows us to distinguish the amorphous unreduced iron phase from the silica binder, indicating these are two separate phases. These results shed light onto the complex phase transformations that accompany the activation of iron catalysts for Fischer-Tropsch synthesis.

Highly dispersed gold particles (<2 nm) were synthesized within the pores of mesoporous silica with pore sizes ranging from 2.2 to 6.5 nm and different pore structures (2D-hexagonal, 3D-hexagonal, and cubic). The catalysts were reduced in flowing H2 at 200 degrees C and then used for CO oxidation at temperatures ranging from 25 to 400 degrees C. The objective of this study was to investigate the role of pore size and structure in controlling the thermal sintering of Au nanoparticles. Our study shows that sintering of Au particles is dependent on pore size, pore wall thickness (strength of pores), and pore connectivity. A combination of high-resolution TEM/STEM and SEM was used to measure the particle size distribution and to determine whether the Au particles were located within the pores or had migrated to the external silica surface.

An essential property of combustion catalysts is long-term (>8000 h) stability at high temperatures in an environment (approximately 1 atm of both oxygen and water vapor) that aggressively promotes sintering of the supporting oxide and coarsening of the active component. Extrapolation of accelerated coarsening rate measurements, determined from shorter exposures at higher temperatures, can be made with more confidence if the physical processes of the coarsening and sintering processes were well understood. The current work examines in detail the coarsening of a high-weight-loaded palladium catalyst supported by silica-stabilized alumina at 900 degrees C in such an aggressive environment. The results of this investigation showed that the Pd particle size distribution was consistently log-normal for time periods from 100 to 4000 h, the mean particle growth rate was roughly inverse second-order in mean particle diameter, and the support not only sintered but also underwent phase transformation. The results implicate both coalescence and Ostwald ripening as important coarsening processes.

Pores arranged in a two-dimensional hexagonal structure inside spherical mesoporous silica particles help to prevent the thermal sintering of gold nanoparticles compared to straight pores in MCM-41.

We report the synthesis, characterization, and catalytic activity of bimetallic palladium-platinum dendrimer-encapsulated catalysts (DECs). These materials are prepared by co-complexation of different ratios of palladium and platinum salts to the interior tertiary amines of fourth-generation, hydroxyl-terminated poly(amidoamine) (PAMAM) dendrimers. Chemical reduction of these composites yields stable, fairly monodisperse, water-soluble bimetallic DECs having sizes on the order of 1.9 +/- 0.4 nm. Evidence that these nanoparticles are bimetallic comes from single-particle X-ray energy dispersive spectroscopy (EDS) and catalysis experiments. The latter indicate that the hydrogenation rate of allyl alcohol is enhanced in the presence of the bimetallic nanoparticles compared to DECs containing only platinum or only palladium nanoparticles. EDS results indicate that the percentage composition of the bimetallics is reflected by the percentage of metal salts initially complexed with the dendrimer.

: We have used the technique of in situ electron microscopy to study the oxidation and reduction of the palladium (Pd) catalysts. In this study, we have subjected a Pd catalyst to oxidation and reduction cycles and studied the changes in particle structure and morphology with in situ electron diffraction and imaging. The PdO particles can be reduced to Pd metal in situ at temperatures as low as 200 degreesC in an atmosphere of a few Torr of both H2 and O2. We also found that essentially the same reduction occurred in the vacuums of 10(-6) to 10(-7) Torr in two different electron microscopes. Our in situ reduction studies show that many of the oxide particles form voids when reduced to Pd metal. The decrease in volume that occurs during reduction is often accommodated by a combination of particle shrinkage and void formation. The production of voids does not seem to depend on either the reducing atmosphere or the rate of reduction, although the voids appear to be unstable above 500 degreesC.