Search

X-ray magnetic circular dichroism is an efficient contrast mechanism allowing for a direct sensitivity to magnetization. Combined with an imaging technique such as photoemission electron microscopy, it has been successfully applied to high-resolution investigations of ferromagnetic thin films but also of three-dimensional systems thanks to the transmission-type contrast in their shadow. Our focus in this work is the wave-optics scattering pattern that can be observed near such a shadow's rim. Taking advantage of non-uniform magnetic states present in near-micron-size Co$_{1-x}$Gd$_x$ beads, we first show how X-ray resonant magnetic scattering affects the Fresnel diffraction at the Co L$_3$ edge. In order to confirm this observation, we then turn to the Co M$_{2,3}$ edges. There, we measure magnetic scattering patterns with a significantly increased spatial extent (due to the larger wavelength), despite the signal's weakness. The patterns' origin is supported by a comparison between our experimental data and a simple analytical model, then numerical simulations., Comment: 13 pages, 11 figures

Mixing two chemical elements at the surface of a substrate is known to produce rich phase diagrams of surface alloys. Here, we extend the concept of surface alloying to the case where the two constituent elements are not both atoms, but rather one atom (copper) and one molecule (fullerene). When deposited at room temperature on a Cu(111) surface, fullerenes intermix with the metal substrate. Surprisingly, 10 distinct copper-fullerene surface alloys are found to coexist. The structure of these alloys, i.e. their composition and commensurability relationship with the substrate, is resolved using scanning tunneling microscopy and density functional theory calculations. This diversity in the alloying process is associated to the multiple possibilities a fullerene can bind to the Cu surface. The molecules are indeed found to have in-plane and out-of-plane positional degree of freedom: the molecular alloys have elastic in-plane properties and can buckle. In addition, the molecules can rotate on their binding sites, conferring extra degrees of freedom to the system. We introduce a competing-interaction energy model, parametrized against the results of the \textit{ab initio} calculations, that describes well all the phases we observe experimentally., Comment: Submitted

Two-dimensional confinement of lattices produces a variety of order and disorder phenomena. When the confining walls have atomic granularity, unique structural phases are expected, of relevance in nanotribology, porous materials or intercalation compounds where \textit{e.g.} electronic states can emerge accordingly. The interlayer's own order is frustrated by the competing interactions exerted by the two confining surfaces. We revisit the concept of orientational ordering, introduced by Novaco and McTague to describe the twist of incommensurate monolayers on crystalline surfaces. We predict a two-way twist of the monolayer as its density increases. We discover such a behavior in alkali atom monolayers (sodium, cesium) confined between graphene and an iridium surface, using scanning tunneling microscopy and electron diffraction., Comment: 6 pages, 3 figures

Transition metal surfaces catalyse a broad range of thermally-activated reactions involving carbon-containing-species -- from atomic carbon to small hydrocarbons or organic molecules, and polymers. These reactions yield well-separated phases, for instance graphene and the metal surface, or, on the contrary, alloyed phases, such as metal carbides. Here, we investigate carbon phases on a rhenium (0001) surface, where the former kind of phase can transform into the latter. We find that this transformation occurs with increasing annealing time, which is hence not suitable to increase the quality of graphene. Our scanning tunneling spectroscopy and reflection high-energy electron diffraction analysis reveal that repeated short annealing cycles are best suited to increase the lateral extension of the structurally coherent graphene domains. Using the same techniques and with the support of density functional theory calculations, we next unveil, in real space, the symmetry of the many variants (two six-fold families) of a rhenium surface carbide observed with diffraction since the 1970s, and finally propose models of the atomic details. One of these models, which nicely matches the microscopy observations, consists of parallel rows of eight aligned carbon trimers with a so-called $(7\times\sqrt{\mathrm{19}})$ unit cell with respect to Re(0001)., Comment: 12 pages, 6 figures

Graphene holds promises for exploring exotic superconductivity with Dirac-like fermions. Making graphene a superconductor at large scales is however a long-lasting challenge. A possible solution relies on epitaxially-grown graphene, using a superconducting substrate. Such substrates are scarce, and usually destroy the Dirac character of the electronic band structure. Using electron diffraction (reflection high-energy, and low-energy), scanning tunneling microscopy and spectroscopy, atomic force microscopy, angle-resolved photoemission spectroscopy, Raman spectroscopy, and density functional theory calculations, we introduce a strategy to induce superconductivity in epitaxial graphene $via$ a remote proximity effect, from the rhenium substrate through an intercalated gold layer. Weak graphene-Au interaction, contrasting with the strong undesired graphene-Re interaction, is demonstrated by a reduced graphene corrugation, an increased distance between graphene and the underlying metal, a linear electronic dispersion and a characteristic vibrational signature, both latter features revealing also a slight $p$ doping of graphene. We also reveal that the main shortcoming of the intercalation approach to proximity superconductivity is the creation of a high density of point defects in graphene (10$^{14}$~cm$^{-2}$). Finally, we demonstrate remote proximity superconductivity in graphene/Au/Re(0001), at low temperature., Comment: 13 pages, 6 figures, to appear in 2D Materials

Intercalation of alkali atoms within the lamellar transition metal dichalcogenides is a possible route toward a new generation of batteries. It is also a way to induce structural phase transitions authorizing the realization of optical and electrical switches in this class of materials. The process of intercalation has been mostly studied in three-dimensional dichalcogenide films. Here, we address the case of a single-layer of molybdenum disulfide (MoS$_2$), deposited on a gold substrate, and intercalated with cesium (Cs) in ultra-clean conditions (ultrahigh vacuum). We show that intercalation decouples MoS$_2$ from its substrate. We reveal electron transfer from Cs to MoS$_2$, relative changes in the energy of the valence band maxima, and electronic disorder induced by structural disorder in the intercalated Cs layer. Besides, we find an abnormal lattice expansion of MoS$_2$, which we relate to immediate vicinity of Cs. Intercalation is thermally activated, and so is the reverse process of de-intercalation. Our work opens the route to a microscopic understanding of a process of relevance in several possible future technologies, and shows a way to manipulate the properties of two-dimensional dichalcogenides by "under-cover" functionalization., Comment: 6 figures

A broad variety of defects has been observed in two-dimensional materials. Many of these defects can be created by top-down methods such as electron irradiation or chemical etching, while a few of them are created along bottom-up processes, in particular during the growth of the material, in which case avoiding their formation can be challenging. This occurs e.g. with dislocations, Stone-Wales defects, or atomic vacancies in graphene. Here we address a defect that has been observed repeatedly since 2007 in epitaxial graphene on metal surfaces like Ru(0001) and Re(0001), but whose nature has remained elusive thus far. This defect has the appearance of a vacant hill in the periodically nanorippled topography of graphene, which comes together with a moir{\'e} pattern. Based on atomistic simulations and scanning tunneling microscopy/spectroscopy measurements, we argue that such defects are topological in nature and that their core is a stacking fault patch, either in graphene, surrounded by loops of non-hexagonal carbon rings, or in the underlying metal. We discuss the possible origin of these defects in relation with recent reports of metastable polycyclic carbon molecules forming upon graphene growth. Like other defects, the vacant hills may be considered as deleterious in the perspective of producing high quality graphene. However, provided they can be organized in graphene, they might allow novel optical, spin, or electronic properties to be engineered.

Microscopic pathways of structural phase transitions are difficult to probe because they occur over multiple, disparate time and length scales. Using $in$ $situ$ nanoscale cathodoluminescence microscopy, we visualize the thermally-driven transition to the perovskite phase in hundreds of non-perovskite phase nanowires, resolving the initial nanoscale nucleation and subsequent mesoscale growth and quantifying the activation energy for phase propagation. In combination with molecular dynamics computer simulations, we reveal that the transformation does not follow a simple martensitic mechanism, and proceeds via ion diffusion through a liquid-like interface between the two structures. While cations are disordered in this liquid-like region, the halide ions retain substantial spatial correlations. We find that the anisotropic crystal structure translates to faster nucleation of the perovskite phase at nanowire ends and faster growth along the long nanowire axis. These results represent a significant step towards manipulating structural phases at the nanoscale for designer materials properties., Comment: 8 pages, 3 figures, ancilliary supplementary information

In crystal growth, surfactants are additive molecules used in dilute amount or as dense, permeable layers to control surface morphologies. Here, we investigate the properties of a strikingly different surfactant: a two-dimensional and covalent layer with close atomic packing, graphene. Using in situ, real time electron microscopy, scanning tunneling microscopy, kinetic Monte Carlo simulations, and continuum mechanics calculations, we reveal why metallic atomic layers can grow in a two-dimensional manner below an impermeable graphene membrane. Upon metal growth, graphene dynamically opens nanochannels called wrinkles, facilitating mass transport, while at the same time storing and releasing elastic energy via lattice distortions. Graphene thus behaves as a mechanically active, deformable surfactant. The wrinkle-driven mass transport of the metallic layer intercalated between graphene and the substrate is observed for two graphene-based systems, characterized by different physico-chemical interactions, between graphene and the substrate, and between the intercalated material and graphene. The deformable surfactant character of graphene that we unveil should then apply to a broad variety of species, opening new avenues for using graphene as a two-dimensional surfactant forcing the growth of flat films, nanostructures and unconventional crystalline phases.

Moir\'e superlattices in graphene supported on various substrates have opened a new avenue to engineer graphene's electronic properties. Yet, the exact crystallographic structure on which their band structure depends remains highly debated. In this scanning tunneling microscopy and density functional theory study, we have analysed graphene samples grown on multilayer graphene prepared onto SiC and on the close-packed surfaces of Re and Ir with ultra-high precision. We resolve small-angle twists and shears in graphene, and identify large unit cells comprising more than 1,000 carbon atoms and exhibiting non-trivial nanopatterns for moir\'e superlattices, which are commensurate to the graphene lattice. Finally, a general formalism applicable to any hexagonal moir\'e is presented to classify all reported structures., Comment: 14 pages, 6 figures

The structure of the ultimately-thin crystalline allotrope of silicon oxide, prepared onto a ruthenium surface, is unveiled down to atomic scale with chemical sensitivity, thanks to high resolution scanning tunneling microscopy and first principle calculations. An ordered oxygen lattice is imaged which coexists with the two-dimensional monolayer oxide. This coexistence signals a displacive transformation from an oxygen reconstructed-Ru(0001) to silicon oxide, along which latterally-shifted domains form, each with equivalent and degenerate epitaxial relationships with the substrate. The unavoidable character of defects at boundaries between these domains appeals for the development of alternative methods capable of producing single-crystalline two-dimensional oxides.

Graphene is attractive for spintronics due to its long spin life time and high mobility. So far only thick and polycrystalline slabs have been used as ferromagnetic electrodes. We report the growth of flat, epitaxial ultrathin Co films on graphene. These display perpendicular magnetic anisotropy in the thickness range 0.5-1nm, which is confirmed by theory. PMA, epitaxy and ultrathin thickness bring new perspectives for graphene-based spintronic devices such as the zero-field control of an arbitrary magnetization direction, band matching between electrodes and graphene, and interface effects such as Rashba and electric field control of magnetism.

We report a detailed magnetic study of a new type of self-organized nanowires disclosed briefly previously [B. Borca et al., Appl. Phys. Lett. 90, 142507 (2007)]. The templates, prepared on sapphire wafers in a kinetically-limited regime, consist of uniaxially-grooved W(110) surfaces, with a lateral period here tuned to 15nm. Fe deposition leads to the formation of (110) 7 nm-wide wires located at the bottom of the grooves. The effect of capping layers (Mo, Pd, Au, Al) and underlayers (Mo, W) on the magnetic anisotropy of the wires was studied. Significant discrepancies with figures known for thin flat films are evidenced and discussed in terms of step anisotropy and strain-dependent surface anisotropy. Demagnetizing coeffcients of cylinders with a triangular isosceles cross-section have also been calculated, to estimate the contribution of dipolar anisotropy. Finally, the dependence of magnetic anisotropy with the interface element was used to tune the blocking temperature of the wires, here from 50K to 200 K.

We have self-organized versatile magnetic nanowires, ie with variable period and adjustable magnetic anisotropy energy (MAE). First, using the kinetic roughening of W(110) uniaxial templates of trenches were grown on commercial Sapphire wafers. Unlike most templates used for self-organization, those have a variable period, 4-12nm are demonstrated here. Fe deposition then results in the formation of wires in the trenches. The magnitude of MAE could be engineered up or down by changing the capping- or underlayer, in turn affecting the mean superparamagnetic temperature, raised to 175K so far., Comment: 3 pages

We have revisited the epitaxial growth modes of Fe on W(110) and Mo(110), and propose an overview or our contribution to the field. We show that the Stranski-Krastanov growth mode, recognized for a long time in these systems, is in fact characterized by a bimodal distribution of islands for growth temperature in the range 250-700°C. We observe firstly compact islands whose shape is determined by Wulff-Kaischev's theorem, secondly thin and flat islands that display a preferred height, ie independant from nominal thickness and deposition procedure (1.4nm for Mo, and 5.5nm for W on the average). We used this effect to fabricate self-organized arrays of nanometers-thick stripes by step decoration. Self-assembled nano-ties are also obtained for nucleation of the flat islands on Mo at fairly high temperature, ie 800°C. Finally, using interfacial layers and solid solutions we separate two effects on the preferred height, first that of the interfacial energy, second that of the continuously-varying lattice parameter of the growth surface., Comment: 49 pages. Invited topical review for J. Phys.: Condens. Matter