Search

This article aims to analyze the causes of pathological manifestations in a residential complex. This in situ investigation investigated and identified the types of pathologies found in the concrete structure as well as cataloging the main manifestations in specific rooms of the complex's central residence. From this, an appropriate treatment was determined for each room, meeting the specifications of ABNT technical standards for the recovery and maintenance of the structure. The manifestations found were: cracks, cracks, repression, stains, shedding of the paint on the walls and ceiling, leaching, efflorescence, carbonation, corrosion and exposure of the armor. These manifestations appeared in a very short period of the useful life of the structure after the completion of the building, around 7 years, which revealed many errors in architectural design, materials without technological control and with inferior functionality and quality, among others.

The escape route is used to indicate the emergency exit, leading to the exit, stairs, fire doors and not obstructing them. In all companies there is a use of signs that indicate an escape route in emergencies. These plates are made of special materials that allow the visualization of the same case of power failure. The batteries contain a special ink or film that is being charged by ambient light. The values are varied from material to material and should be analyzed according to a demand definition.

The use of individual protective equipment (IPE) is extremely essential for any activity that is prone to occupational hazards and / or illnesses that could threaten the safety and health of the worker. The construction market has grown abundantly in recent years, and consequently the risk of accidents in this work environment as well. There are several reasons for this growing increase in accidents at work, among them is the Contracting Company that does not provide correctly the equipment of personal protection for its employees and the lack of commitment and interest of the employees in the use of protective equipment. The objective of this study is to evaluate the use of individual protection equipment in the construction company in a given service rendering, which includes the construction of reinforced concrete wall and drainage network installation, observing the methods used for adhesion and control of the use of IPE. Although the work is short-term and the accident risk is high, in the course of the work up to the date of delivery, a satisfactory result was obtained both for the Company and for the employees involved in the activities, as it had no accident of job.

This work is scoped to perform field work in Ecoart Structure and Production company to identify the factors that contribute to stress at work, and way to solve it. In this context the study notes that occupational stress can be caused by several factors present daily in organizations, damaging the working environment, productivity and so the company's profit. Stress index refers to the control of absences at times when workers are the scheduled time of the workday. The concept can also be better understood by the sum of the periods in which employees of a given organization absent from the work, including delays within their normal working hours. The method adopted for the realization of the research was descriptive. The typology of the adopted research covered three aspects: on the objectives treated is a deductive research; as the problem of approach was qualitative and quantitative; on the technical procedures, was literature. Through the survey it was observed that the valuation of intellectual capital can be a proposal for the reduction of occupational stress, as the successful application of this theory for the treatment of stress is to assimilate possible decision-making for managers of the resource area humans. At the end of this research are addressed recommendations that may be in guidelines for the management of people in organizations for the effective management of the causes and consequences of occupational stress, through the enhancement of intellectual capital.

The civil construction sector in Manaus is in continuous growth, just walk through the city and observe the excessive amount of construction, repairs and renovations. As a result, the development of techniques and methods to make sustainable day-to-day activities sustainable has intensified since the practice of reuse of construction waste is the worldwide trend towards mitigation of environmental problems. The reuse system is the technique that has been adopted by construction companies with the objective of lowering the environmental impact, as well as the reduction of costs with the creation of other new products of the same rhyme, which ensures the success of sales of the products in the construction market. As Manaus does not yet have a recycling and processing plant, as provided for in the COMANA Resolution since 2002 for these wastes, companies are at the mercy of the will of others that can easily lead them to places that are inappropriately used illegally. It should be noted that the survey carried out a survey of waste entering and leaving the worksite in the city of Manaus and proposed a roadmap for the implementation of a solid waste management plan to improve and correct waste disposal.

Currently, the subject of Project Management has received great evidence in the business world due to the competition dispute and increasing competitiveness, which makes the business organizations present solutions more quickly and efficiently to external stimuli, in civil construction has been growing the concept of project management with the purpose of having term, quality, profit in the services rendered. With this vision, several tools, methodologies and even organizational entities have been developed with the purpose of ensuring that the projects achieve the expected results. Thus, with several processes and tasks, the project integration management area has high professional relevance, ranging from the elaboration of the scope, through the monitoring and control of the project, and ends in the organization of the final materials, as well as in the lessons learned. Thus, the article will present a project integration plan developed by a construction service provider, the integration plan aims to meet Project management, Time management, Cost management, Quality management and Human resources and their respective controls.

The Civil Construction is one of the sectors of economic activity that most absorbs accidents at work and where the risk of accidents is higher. The theme of safety and health in construction is relevant not only because it is a dangerous activity, but also, above all, because the prevention of work-related accidents requires specific focus, both by the particular nature of construction work and by the temporary character of the work centres (works). The purpose of this study is to present this topic in such a way as to highlight its contributions to the Management of Safety and Health. The data collection was made through a bibliographical review, from which it was possible to study all outstanding prominencies in NR 18, noting that this subject is highly favored in terms of providing the human well, both internally and externally to society, as acting in the project phase, providing for security measures in the post, where audits, performance indicators and contractual clauses on safety and health should be provided. I work in relation to the companies that act on the work.

There is a known shortage in the technical literature regarding fire prevention and fire fighting, which is often not even a constant subject in the curriculum of engineering courses. In Manaus, fire projects are regulated by the Fire Brigade Technical Standards, so there is often a technical deficiency in the preparation of these projects. In this context this work is inserted, aiming to provide a logical and normative roadmap for the correct design of fire prevention and fire prevention facilities. The object of study adopted is a Shed of 2,112.00 square meters, located in the West Zone of Manaus. The design determined a mixed fire fighting system between extinguishers and fire hydrants, requiring the adoption of elevated reservoir systems and fire pumps.

This project intends to elaborate a computer program that will constitute the results of research and the educational difficulty level of the riverside population of Paraná, in the Municipality of Careiro da Várzea, advising the teachers and students with a regional language and easy to know, highlighting traditional learning in a participatory way. With a perception of construction management, the techniques used in the activities will be used to manage the stages based on knowledge of PMBoK v4.

In many construction texts, the risk of falling becomes worrying, often overlooked and / or overlooked as an employee or employee. The MTE (Ministry of Labor and Employment) presents 30% of occupational investments that occur each year and falls from a height. In order to reduce the rate of falls, a Regulatory Standard No. 35, located for work at height, with a reference capacity for this work was created. safety. And with the expansion over the years, an increasing number of accidents have been added, and so on, increasingly frequent. This work aims to implement a Regulatory Standard - NR 35 for an improvement of the work execution process.

The pesticide has been used over time to optimize agricultural production and prevent certain types of unwanted fungi or herbs in its production with certain pesticides making it harmful to health both by consuming and especially by creating a direct contact, using as base the work safety standards imposed by federal law. 7,802, July 11, 1989 and Decree 4,074, January 4, 2002, NR15 and NR31 aiming at the correct application of pesticides and better storage using the field research methodology, photographic records and questionnaires with the rural worker, resulting in non-compliance with the same already mentioned for lack of correct use of PPE during the application and lack of MSDS (Chemical Safety Data Sheet) at the storage site, however in view of the information presented, attention is needed with the rural worker and his quality of work.

The study of occupational risk analysis is a technique that has been gaining ground among companies that care about the health and safety of their employees. This study has as its main objective to identify and analyze the probable risks in a trade in the Center of Manaus, in order to prevent accidents and propose improvements to make the work environment adequate for the activities. This study basically consists of three steps: visual description where it was observed through site visit; Risk identification and proposed improvements to address the problem. As a result, it was found that commerce has ergonomic and accident risks. And it was proposed safety measures and use of PPE to prevent occupational accidents.

Today we have several technological management tools, but still many projects or processes do not fit in any of them, the purpose is to report how simple, easy and effective to use the PDCA Cycle and help in decision making, guiding the path to improvement continuous management of processes or projects. The aim of this paper is also to elucidate the importance of the tool applied in the professional qualification course of Residential Hydraulic Installer of SENAI Demóstenes Travessa School, showing benefits in the acquisition of inputs and consequently lower financial expenses and environmental impacts.

This paper aims to highlight the importance of Internal Auditing for the Treasury sector in particular for a Construction Industry, as well as to investigate whether Internal Auditing systems can be considered as a tool in the procedures. management Due to the constant growth in the last years, the Construction Industries, linked to the existence of a specific branch of the new administration, reflected in the main objective of this work that focuses on proposing an Independent Audit work in the financial sector with the accounting sector of the company object of our study, for the purpose of ascertaining the procedures adopted organization with its customers. Regarding the methodology adopted by this research we have that the research was descriptive and bibliographic, because it was based on material published in books, newspapers, magazines, websites, among others. However, a case study carried out in the month of August/2019 in the premises of a Construction Industry that makes up the subject of this research stands out. Finally, regarding the need for transparency in the company's treasury, it was found that there are tools available to organizations for systematic use.

Regarding the historic squares of the city, several have reached a stage of total degradation others have disappeared or suffer from overuse or misuse. Methodology: bibliographic and field research. Revitalization deals with a series of steps that lead a given space to have new efficiency, a new sense of usability, improving its surroundings in order to provide its residents and visitors a better living and leisure space. The proposal has a modern architecture following the standards of reforms that are currently being made in all major cities of the country, among its modifications include the implementation of outdoor gym, playground, ramps designed within accessibility standards, tactile floor installation, etc. The cost of the project will be R $ 255,837.02 plus BDI rate of 23.89%, lasting 60 days for its completion.

The purpose of this work is to develop an Automated Guided Vehicle (AGV) for the transport of microwave oven bulbs for white-line companies. In order to do so, it is proposed to project and implement a mobile reactive robot that transports light bulb boxes with of defined weights, this robot being a line follower with built in sensors to move, making use of the computational tool Autodesk Inventor for drawing and mechanical tests and the development of the software in a language based on C/C ++, called Wiring. The assembly of the robot began with the creation of the mechanical design with the intention of assisting in the management and supply of the white lines providing a simple and fluid management delivering the bulbs on the depot path to the production lines not requiring the employee to leave the working environment. avoiding losses such as time and work accident while loading the product. The results obtained in the experiments performed during the research showed that the system performed the movement in a stable and correct way, that is, following the line until finding the requested position.

The uses of Individual Protection Equipment is fundamental to guarantee the professional safety, the objective of this work was to analyze how the small construction companies has been handling this subject in Amazonas, specifically in the Municipality of Presidente Figueiredo, where the research was carried out. A questionnaire was applied addressing topics of simple understanding for a better understanding of the interviewees. With the results of the research, comparative charts were elaborated. The research results reveal that employees have knowledge about the use of PPE, but there is a great lack of supervision and management of work safety in the participating companies.

This article will evaluate in the context of occupational safety. The disposition of risks within the company Via Sat élite communications LTDA. To perform the work at first, a technical visit was made to the company, a photographic report was generated and a questionnaire was answered by the workers. Afterwards, with these data, a floor plan of the site was generated and the risks were identified according to the environments, generating the risk map, taking advantage of the information and based on specific laws and regulations, was prepared the fire-fighting project. It was observed that the company has fire-fighting equipment with proper use conditions and correctly quantified and leased, also noted a greater predominance of ergonomic risk in return for the company's great concern with employee safety.

In Brazil, the state is responsible for investing 5% of its gross domestic product in public works, from various sectors, from infrastructure to health unit reforms. In theory, this investment should warm the market and ensure an adequate infrastructure, but what happens is a slow market and a high index of works not completed, abandoned or delivered in disagreement with the minimum conditions of use. This work aims, through the analysis of three budgets, to check within this limited cut, the quality and feasibility of budgets pre-arranged for the execution of works. After analyzing the cases presented, it was possible to conclude that there is a divergence between the market value and the budgeted value, due to the absence of compositions necessary for the proper execution of the service, it was also observed the absence of compensatory mechanisms of the natural lag of base prices of the budgets and the values of inputs when the work is carried out.

This work of completion aimed to demonstrate the importance of the use of PPE in construction with awareness and guiding the use of personal protective equipment at the construction site area. It is estimated that the construction activity is responsible for many accidents, by requiring its employees to expose themselves to environmental hazards, such as: physical, chemical, biological, ergonomic and accidents. Considering that the Personal Protective Equipment PPE are important security items from working, since, in construction using the same becomes sporadic or non-existent on the part of service providers and employees, even if they have knowledge of the law and standards. During the study we can observe and note that the use of PPE is very important and essential in reducing the risks of accidents during the execution of the activities and their functionality, because the protection of the physical integrity and health of the employee is not isolated behavior, and these must have training and technical guidance on the appropriate use of personal protective equipment. It is understood that the lack of planning of a competent security system can cause occurrences of accidents, causing losses for low productivity and increased costs. Thus, it is evident the importance and prominence that has gained the use of PPE in construction, because this is a topic that has been evolving and requires continuous recycling of professionals in this area.

The lack of project management in the municipality of Presidente Figueiredo has consequences for work safety, which has been a notorious case of inapplicability of engineering sector norms, causing risk to the operation being performed as well as to all involved. Therefore, this article proposes the search to detect errors and thus improve efficiency through indicators that can be followed by companies, since it is common knowledge that management still presents itself erroneously in the civil sector.

This article is about the behavior of leaders in business management, showing the need for good leaders in today's world, their characteristics, skills and competences. This literature review seeks to find a model, a leader that best suits in different situations for the XXI century proposing that the appointment of leaders in companies be made through this analysis of criteria, not only in function of IQ or the function they occupy, but because of their true ability to influence people. Good leaders can hardly lose control, are confident, and can handle different styles of people. For leadership positions it has been proven through research that you need to have E.Q, emotional quotient, plus strategic vision.

This article will evaluate the human resources and materials management of Via satellite communications LTDA. In business management, Materials and Personnel Resources are used to size inventory, distribute jobs and activities, define the appropriate physical structure of the enterprise, and others. Therefore, a study was conducted to evaluate the management of these resources. To perform the work, a photographic report was generated and a questionnaire was answered by the interviewee, a floor plan of the place was generated and the flow of materials from inside the store was determined, a flow chart of positions and description of activities performed was also prepared. The company has a good division of functions, material handling control, and adequate structure for the activity developed. It was suggested greater stock organization and workers' awareness of the internal material processing.

Walkways are scaffolding erected to cross natural or artificial barriers and take care of the passenger's own safety. There are walkways over rivers, lakes, roads, railroads, valleys and also as connections between buildings, which aim at the physical distance between pedestrian flow and disorders that individuals are not able to cope with, such as water currents, the height of buildings and vehicles at high speed. The theme "Design of Reinforced Catwalk" aims to demonstrate how the design of a reinforced concrete walkway, showing the possible pathologies that may occur in these structures. The article followed the precepts of exploratory study, through bibliographic research, was developed from material already prepared, consisting of scientific articles. It has been found that it is important to consider the permanent load of the element. In the case of walkways, the load must be established in addition to its own weight, by variables that are part of the physical framework itself, other fixed overloads, such as: concrete slab, steel structures, paving, railing, signs, among others. . As for pathologies, it was concluded that the best option to prevent pathological conditions is prevention. Prevention is generated not only by a project or execution within the quality parameters, but mainly by a structural maintenance program. These programs play an important role in any structure, facilitating the verification of structural deterioration states and favoring the reduction of treatment costs. These procedures will certainly prevent the formation of marked and widespread pathologies.

The use of Personal Protective Equipment (PPE) is a method of preventive action against accidents at work, with a purpose to preserve the individual from the threats to his individual health and safety. The objective of this work is to elucidate the success of the methodology applied in the student body of the SENAI Demóstenes Travessa School, regarding the use of PPE in professional qualification courses, preventing and raising awareness among students seeking knowledge to apply in the labor market or in their personal lives, I try in view that, the school is focused on the follow-up of construction, one of the sectors that most accidents occur.

Planning is an administrative tool that makes it possible to perceive reality, evaluate paths, build a future framework, structure the appropriate process and reassess the entire process for which it is intended. The budget derives from the management planning process. Planning is therefore the rational side of action. This research presents a study regarding budget errors due to the lack of prior planning through comparative analysis by observing case studies and identifying good procedures to be replicated, and suggesting recommendations to be adopted by organizations that are adopting or intending to adopt a process. implementation of planning and budget management of works. Among the main errors are the lack of parameterization of budget items and the failure to follow up on field activities. It is up to the engineering professional to pay attention to the correct execution of the monitoring and planning process so that he gets the success of his work.

Recruiting a recruitment and selection that points the interests of companies and values the process with feedback directed to the candidate is the new practice of many companies seeking to reach the human side. The aim of this study is to discuss the importance of the Recruitment and Internal Selection process in the P&S Enterprise by using a case study as a research method to analyse the organizational results. In this way, it is concluded that the company correctly uses its career plan, giving due importance to the institution's recruitment and internal selection process. In order to enhance the knowledge of the managers who act in this process of employee review, the company could provide specific courses for their managers when they will enhance their knowledge in planning, recruiting and empowering the individual to suit the organization's organizational system.

The slabs, as it is a project above 2 meters must be aligned with the NRs, so that no accidents occur with workers during the execution of the project. Given the above, this research aims to: Analyze the Work Safety Standards for Slab Execution and as specific objectives: Contextualize civil construction; To show the problems of construction with respect to safety at work; Highlight work safety standards for slab execution. It was found that the use of NRs in the Lajes construction process is important, so that no accidents occur in the work environment, as well as during the entire construction process. In the construction process as a whole. The use of IPEs is proven to be highly relevant to avoid work accidents, as well as the lectures and guidance given by professionals to civil construction workers.

Civil construction has great representation for the socioeconomic development of our country. However, it is an activity that, if not carried out within the safety standards required by our labor legislation, provides great trends for labor incidents. The present work aims to address the risks inherent to the misuse of cement in the construction industry for the health of workers, having seen, because cement is a chemical agent that can be inhaled through the respiratory tract or, due to direct contact. with the skin and mucous membranes, and also, by oral intake, provides the severe emergence of pathologies in the health of workers submitted to continuous contact with it. Initially, it will be presented characteristics of this material, as well as some examples of pathologies associated with the use of the product and, finally, emphasize the importance of the use of safety and prevention measures capable of avoiding the referred damages to the workers health. For this, we used the methodology of bibliographic research in scientific sources already consecrated referring to the theme dissertated here that allow to prove the theme treated here. Thus, with the conclusion of the subject, it is concluded that it is necessary to use all necessary safety measures to ensure the development of the activity, but especially to ensure the integrity and health of workers who are in continuous contact with the cement.

For a long time, water was considered only as a means of consumption for the survival of living beings. I was not concerned about its quality for its own consumption. But over time, due to many deaths from drinking non-potable water, there have been various adaptations and technologies have emerged for better consumption and treatment of this material. The objective of this research is to analyze the water quality of the Cachoeira Grande stream located in the São Jorge neighborhood in the city of Manaus in order to know the health and safety of the residents and the general population of the Amazonian capital. The analyzes were performed through the physical, chemical and microbiological characteristics of the water collected in three distinct points, near the margins of the stream. The results analyzed were already obvious and yet were disturbing, since there is a great neglect that concerns society in general.

This study presents a bibliographical review about the evaluation of the main complaints of the attendants of a real estate company located in the city of Iranduba/AM. to designate the set of injured musculoskeletal alterations, affected by the workers. To evaluate the main indicative complaints of WMSD. The research was conducted in the internal facilities of the company object of this study. Where a questionnaire was applied with the aid of the REBA tool. The sample of this research was composed by 6 collaborators who work in the company attendance in the morning and afternoon shifts. Data collection took place in June 2019. The data collected through this study indicated important indications of the body regions most susceptible to musculoskeletal disorders related to the profession of attendant.

O concreto é o produto mais utilizado em pequenas e em grandes edificações e a escolha pelo tipo de cimento usado varia entre custo e qualidade atendendo sempre as especificações exigidas pelas normas. O objetivo deste trabalho é comparar o resultado do comportamento mecânico entre duas marcas de cimento da cidade de Manaus denominas para esta pesquisa de CP I-T1 e CP IT2, a escolha pelo modelo CP I-S-40 se dá pela praticidade ao se trabalhar com um material de uso geral quando não são exigidas propriedades especiais, ou seja, um produto que pode ser aplicado em diferentes etapas da obra. Para isso foram executados inúmeros testes tanto nos agregados miúdo e graúdo quanto na própria pasta de cimento para que fosse possível adotar um traço de concreto com um controle de qualidade rigoroso em ambas as marcas, testes como absorção de água e resistência a compressão axial foram executados seguindo um cronograma de 07, 28 e 63 dias após a cura úmida dos corpos de prova.

Este trabalho apresenta um estudo do desempenho físico e mecânico de testes em dois traços diferentes de concreto poroso, popularmente conhecido como concreto permeável. Atualmente problemas relacionados a inundações em áreas de ocupação excessiva de solo impermeável tem preocupado especialistas em drenagem urbana, a utilização do tipo de concreto utilizado nesta pesquisa facilita o escoamento superficial ajudando na aceleração da permeabilidade da água proveniente de chuvas que ocasionam alagamento e enchentes principalmente em áreas urbanas mal planejadas. Utilizou-se de brita, cimento e água para a confecção das amostras e para que fosse possível uma maior segurança na variação de resistência a ruptura dos corpos de prova, foram feitas 10 amostras no último ensaio proposto até que se chegasse em uma taxa de diferença mínima entre o resultado das análises a compressão tornando assim um material que resistisse a áreas relacionadas ao trânsito de pessoas como calçadas, passarelas e até mesmo ciclovias.

O aumento dos resíduos gerados pela construção civil (RCC) nos últimos anos, sem uma destinação adequada, tem acumulado preocupações não só aos órgãos governamentais mais também ao que se refere a meio ambiente e a saúde pública no Brasil, do qual varia de região para região. A utilização desses RCC’s incorporados ao concreto para a redução desses aglomerados, tem sido uma solução cada vez mais empregada por empresas desse segmento que se preocupam com o futuro do nosso planeta. Então, este estudo apresenta uma viabilidade na utilização dos resíduos de marmoraria como agregado graúdo em substituição total da brita n° 0 no concreto convencional. Para isso, foram realizados experimentos laboratoriais com o objetivo de caracterizar todos os materiais utilizados. Após a caracterização foram verificadas as resistências à compressão axial dos Corpos de Prova endurecidos e curados nas idades de 7 e 28 dias, divididos em dois grupos com 4 CP’s cada um. A média dos resultados do resíduo com o valor de 25,02 MPa e do concreto convencional com brita, no valor de 27,32 MPa, torna-se possível a utilização do resíduo para pequenas edificações como: calçadas, sarjetas e lajes não estruturais de pequeno porte.

Generation of electric energy through wind turbines is one of the practically inexhaustible alternatives of generation. It is considered a source of clean energy, but still needs a lot of research for the development of science and technologies that ensures uniformity in generation, providing a greater participation of this source in the energy matrix, since the wind presents abrupt variations in speed, density and other important variables. In wind-based electrical systems, it is essential to predict at least one day in advance the future values of wind behavior, in order to evaluate the availability of energy for the next period, which is relevant information in the dispatch of the generating units and in the control of the electrical system. This paper develops ultra-short, short, medium and long-term prediction models of wind speed, based on computational intelligence techniques, using artificial neural network models, Autoregressive Integrated Moving Average (ARIMA) and hybrid models including forecasting using wavelets. For the application of the methodology, the meteorological variables of the database of the national organization system of environmental data (SONDA), Petrolina station, from 1 January 2004 to 31 March 2017, were used. A comparison among results by different used approaches is also done and it is also predicted the possibility of power and energy generation using a certain kind of wind generator.