Search

We report here an electrolysis optical coherence tomography (eOCT) platform to visualize the chemical reactions occurring in a CO2 electrolyzer. The eOCT platform was designed to capture three dimensional images and videos at high spatial (~1 µm) and temporal (3 to reduce CO2 into CO at applied current densities of 50-800 mA cm−2. This video resolved the nucleation and formation of CO2 in the cathode compartment upon reaction of HCO3– with H+ delivered through the membrane, the formation of CO at the cathode|electrolyte interface, and H2 throughout the cathode compartment. The video captured the strikingly dynamic movement of the cathode and membrane components during electrolysis, and linked CO production to regions of the electrolyzer in which CO2 were in direct contact with both the membrane and the catalyst layers. This visualization enabled us to correlate the decrease in CO production to a buildup of CO2, CO, and H2, and (bi)carbonate salts at the cathode layer. The statistical analysis of phase distribution images allowed us to understand the competition between main (CO2 reduction) and side (hydrogen evolution) reactions in both time and space domains. We also show how a pulsing current liberates these residual bubbles and (bi)carbonates to recover CO production. These results highlight the power of using an eOCT platform to temporally and spatially resolve CO2RR electrolysis.

Electrocatalytic palladium membrane reactors (ePMRs) use electricity and water to drive hydrogenation reactions without forming H2 gas. In these reactors, a hydrogen-permeable palladium foil physically separates electrochemical proton generation in aqueous media from chemical hydrogenation in organic media. We report herein the use of the ePMR to electrolytically hydrogenate furfural, an important biomass derivative. This system was proven to convert furfural into furfuryl alcohol and tetrahydrofurfuryl alcohol with 84% and 98% selectivities, respectively. To reach these high selectivities, we designed and built an ePMR for high-throughput testing. Using this apparatus, we tested how different solvents, catalysts, and applied currents impacted furfural hydrogenation. We found that bulky solvents with weak nucleophilicities suppressed the formation of side products. Notably, these types of solvents are not compatible with standard electrochemical hydrogenation architectures where electrolysis and hydrogenation occur in the same reaction chamber. This work highlights the utility of the ePMR for selective furfural hydrogenation without H2 gas, and presents a possible pathway for helping to decarbonize the hydrogenation industry.

We report here the direct hydrogenation of O

An electrocatalytic palladium membrane reactor (ePMR) uses electricity and water to drive hydrogenation without H2 gas. The device contains a palladium membrane to physically separate the formation of reactive hydrogen atoms from hydrogenation of the unsaturated organic substrate. This separation provides an opportunity to independently measure the hydrogenation reaction at a surface without any competing H2 activation or proton reduction chemistry. We took advantage of this feature to test how different metal catalysts coated on the palladium membrane affect the rates of hydrogenation of C=O and C=C bonds. Hydrogenation occurs at the secondary metal catalyst and not the underlying palladium membrane. These secondary catalysts also serve to accelerate the reaction and draw a higher flux of hydrogen through the membrane. These results reveal insights into hydrogenation chemistry that would be challenging using thermal or electrochemical hydrogenation experiments.

We report herein that sulfuric acid electrolyte affects the kinetics of hydrogen sorption and desorption, the amount of absorbed hydrogen, and the electrocatalytic activity of palladium using X-ray...

The deployment of electrolyzers that convert CO2 into chemicals and fuels requires appropriate integration with upstream carbon capture processes. To this end, the electrolytic conversion of aqueou...

Strain engineering can increase the activity and selectivity of an electrocatalyst. Tensile strain is known to improve the electrocatalytic activity of palladium electrodes for reduction of carbon dioxide or dioxygen, but determining how strain affects the hydrogen evolution reaction (HER) is complicated by the fact that palladium absorbs hydrogen concurrently with HER. We report here a custom electrochemical cell, which applies tensile strain to a flexible working electrode, that enabled us to resolve how tensile strain affects hydrogen absorption and HER activity for a thin film palladium electrocatalyst. When the electrodes were subjected to mechanically-applied tensile strain, the amount of hydrogen that absorbed into the palladium decreased, and HER electrocatalytic activity increased. This study showcases how strain can be used to modulate the hydrogen absorption capacity and HER activity of palladium.

Gas-fed CO2 electrochemical flow reactors are appealing platforms for the electrolytic conversion of CO2 into fuels and chemical feedstocks at commercially relevant current densities (≥100 mA/cm2)....

Gas diffusion electrodes (GDEs) mediate the transport of reagents, products, and electrons in electrochemical reactors designed to reduce CO2 into fuels or chemicals. While the ratio of ionomer to electrocatalyst in the precursor catalyst ink is typically assumed not to change after being deposited on the GDE, we show herein that this assumption is likely not valid. Moreover, we discovered that the faradaic efficiency for formate, which is considered to be inconsequential relative to CO when using Ag electrocatalysts, can be modulated by 20% by a mere 5 wt% change in GDE Nafion® content. We were able to resolve these small differences in GDE composition by developing an X-ray fluorescence (XRF) spectroscopic protocol that quantifies the sulfonate groups appended to the polytetrafluoroethylene (PTFE) backbone of Nafion®. Using this protocol, we were able to determine how to precisely control the relative amount of ionomer to electrocatalyst for each GDE. We also found that maintaining a uniform ionomer–catalyst composition across the entire GDE can likely be done more effectively with automated spray coating than with manual deposition methods. We recommend following these procedures in order to generate reproducible CO2RR performance parameters in flow cells.

Here, we quantify the effect of an external magnetic field (β) on the oxygen evolution reaction (OER) for a cobalt oxide|fluorine-doped tin oxide coated glass (CoO

The highest performance flow cells capable of electrolytically converting CO2 into higher value chemicals and fuels pass a concentrated hydroxide electrolyte across the cathode. A major problem for CO2 electrolysis is that this strongly alkaline medium converts the majority of CO2 into unreactive HCO3– and CO32– rather than CO2 reduction reaction (CO2RR) products. The electrolysis of CO (instead of CO2) does not suffer from this same problem because CO does not react with hydroxide. Moreover, CO can be more readily converted into products containing two or more carbon atoms (i.e., C2+ products). While several solid-state electrocatalysts have proven competent at converting CO into C2+ products, we demonstrate here that molecular electrocatalysts are also effective at mediating this transformation in a flow cell. Using a molecular copper phthalocyanine (CuPc) electrocatalyst, CO was electrolyzed into C2+ products at high rates of product formation (i.e., current densities J ≥200 mA/cm2), and at high Faradaic efficiencies for C2+ production (FEC2+; 72% at 200 mA/cm2). These findings present a new class of electrocatalysts for making carbon-neutral chemicals and fuels.

Useful materials must satisfy multiple objectives, where the optimization of one objective is often at the expense of another. The Pareto front reports the optimal trade-offs between these conflicting objectives. Here we use a self-driving laboratory, Ada, to define the Pareto front of conductivities and processing temperatures for palladium films formed by combustion synthesis. Ada discovers new synthesis conditions that yield metallic films at lower processing temperatures (below 200 °C) relative to the prior art for this technique (250 °C). This temperature difference makes possible the coating of different commodity plastic materials (e.g., Nafion, polyethersulfone). These combustion synthesis conditions enable us to to spray coat uniform palladium films with moderate conductivity (1.1 × 10

Organic molecular hole-transport materials (HTMs) are appealing for the scalable manufacture of perovskite solar cells (PSCs) because they are easier to reproducibly prepare in high purity than polymeric and inorganic HTMs. There is also a need to construct PSCs without dopants and additives to avoid formidable engineering and stability issues. We report here a power conversion efficiency (PCE) of 20.6% with a molecular HTM in an inverted (p–i–n) PSC without any dopants or interlayers. This new benchmark was made possible by the discovery that, upon annealing, a spiro-based dopant-free HTM (denoted DFH) containing redox-active triphenyl amine (TPA) units undergoes preferential molecular organization normal to the substrate. This structural order, governed by the strong intermolecular interactions of the DFH dioxane groups, affords high intrinsic hole mobility (1 × 10−3 cm2 V−1 s−1). Annealing films of DFH also enables the growth of large perovskite grains (up to 2 μm) that minimize charge recombination in the PSC. DFH can also be isolated at a fraction of the cost of any other organic HTM.

Tunable and highly conductive hole transport materials are crucial for the performance of organic electronics applications such as organic light emitting diodes and perovskite solar cells. For commercial applications, these materials' requirements include easy synthesis, high hole mobility, and highly tuned and compatible electronic energy levels. Here, we present a systematic study of a recently discovered, easy-to-synthesize class of spiro[fluorene-9,9′-xanthene]-based organic hole transport materials. Systematic side group functionalization allows us to control the HOMO energy and charge carrier mobility. Analysis of the bulk simulations enables us to derive design rules for mobility enhancement. We show that larger functional groups (e.g. methyl) decrease the conformational disorder due to steric effects and thus increase the hole mobility. Highly asymmetric or polar side groups (e.g. fluorine), however, increase the electrostatic disorder and thus reduce the hole mobility. These generally applicable design rules will help in the future to further optimize organic hole transport materials.

Electrolytic palladium membrane reactors offer a means to perform hydrogenation chemistry utilizing electrolytically produced hydrogen derived from water instead of hydrogen gas. While previous embodiments of these reactors employed thick (≥25 μm) palladium foil membranes, we report here that the amount of palladium can be reduced by depositing a thin (1–2 μm) layer of palladium onto a porous polytetrafluoroethylene (PTFE) support. The supported palladium membrane can be designed to ensure the fast diffusion of reagent and hydrogen to the palladium layer. The hydrogenation of 1-hexyne, for example, shows that the supported Pd/PTFE membrane can achieve reaction rates (e.g., 0.71 mmol h−1) which are comparable to 0.92 mmol h−1 measured for palladium membranes with a high-surface area palladium electrocatalyst layer. The root cause of these comparable rates is that the high porosity of PTFE enables a 12-fold increase in electrocatalytic surface area compared to planar palladium foil membranes. These results provide a pathway for designing a cost-effective and potentially scalable electrolytic palladium membrane reactor.

The electrolysis of carbon capture solutions bypasses energy-intensive CO

An electrocatalytic palladium membrane reactor (ePMR) uses electricity and water to drive hydrogenation without H

The highest performance flow cells capable of electrolytically converting CO2 into higher value chemicals and fuels pass a concentrated hydroxide electrolyte across the cathode. A major problem for CO2 electrolysis is that this strongly alkaline medium converts the majority of CO2 into unreactive HCO3– and CO32– rather than CO2 reduction reaction (CO2RR) products. The electrolysis of CO (instead of CO2) does not suffer from this same problem because CO does not react with hydroxide. Moreover, CO can be more readily converted into products containing two or more carbon atoms (i.e., C2+ products). While several solid-state electrocatalysts have proven competent at converting CO into C2+ products, we demonstrate here that molecular electrocatalysts are also effective at mediating this transformation in a flow cell. Using a molecular copper phthalocyanine (CuPc) electrocatalyst, CO was electrolyzed into C2+ products at high rates of product formation (i.e., current densities J ≥200 mA/cm2), and at high Faradaic efficiencies for C2+ production (FEC2+; 72% at 200 mA/cm2). These findings present a new class of electrocatalysts for making carbon-neutral chemicals and fuels.

An autonomous laboratory for thin film discovery is used to optimize the doping and annealing of organic semiconductors., Discovering and optimizing commercially viable materials for clean energy applications typically takes more than a decade. Self-driving laboratories that iteratively design, execute, and learn from materials science experiments in a fully autonomous loop present an opportunity to accelerate this research process. We report here a modular robotic platform driven by a model-based optimization algorithm capable of autonomously optimizing the optical and electronic properties of thin-film materials by modifying the film composition and processing conditions. We demonstrate the power of this platform by using it to maximize the hole mobility of organic hole transport materials commonly used in perovskite solar cells and consumer electronics. This demonstration highlights the possibilities of using autonomous laboratories to discover organic and inorganic materials relevant to materials sciences and clean energy technologies.

Summary Commercially available electrochromic (EC) windows are based on solid-state devices in which WO3 and NiOx films commonly serve as the EC and counter electrode layers, respectively. These metal oxide layers are typically physically deposited under vacuum, a time- and capital-intensive process when using rigid substrates. Herein we report a facile solution deposition method for producing amorphous WO3 and NiOx layers that prove to be effective materials for a solid-state EC device. The full device containing these solution-processed layers demonstrates performance metrics that meet or exceed the benchmark set by devices containing physically deposited layers of the same compositions. The superior EC performance measured for our devices is attributed to the amorphous nature of the NiOx produced by the solution-based photodeposition method, which yields a more effective ion storage counter electrode relative to the crystalline NiOx layers that are more widely used. This versatile method yields a distinctive approach for constructing EC windows., Graphical Abstract, Highlights • Amorphous WO3 and NiOx films are produced by a solution-deposition method • The WO3 and NiOx films are assembled into a solid-state electrochromic device • The solid-state device exhibits state-of-the-art electrochromic performance • Amorphous NiOx is a superior counter electrode material compared with crystalline NiOx, Materials Science; Coatings; Energy Materials

We report here an electrochemical method for precise and accurate quantification of hydrogen absorption in palladium materials. We demonstrate that conventional chronocoulometry over-reports adsorbed hydrogen due to charge from the accompanying hydrogen oxidation reaction (HOR). We designed and built a bespoke electrochemical flow cell that mitigates the concurrent HOR reaction and consequently provides improved accuracy and reproducibility relative to other existing electrochemical techniques. The efficacy of this technique is demonstrated experimentally for a series of palladium sample types: a 100 nm electron-beam deposited thin film, a 20 μm electrodeposited palladium film, a casting of 21 nm edge-length cubic nanoparticles, and a casting of 27 nm edge-length octahedral nanoparticles. We contend that this method is the most effective for measuring hydrogen uptake in different palladium samples.

Chemical delithiation is used to prepare bulk quantities of amorphous silicon powder from lithium-silicon compounds. The amorphous silicon materials formed are air and water stable and are found to have layered structures. When cycled in Li-ion half cells, coatings containing layered amorphous silicon are found to have significantly lower volume expansion during lithiation and improved cycling characteristics compared to that of bulk crystalline Si. We suggest chemical delithiation as a convenient method to synthesize bulk quantities of Si powders containing self-organized void spaces that can accommodate volume expansion during lithiation.

Monolayer graphene exhibits many spectacular electronic properties, with superconductivity being arguably the most notable exception. It was theoretically proposed that superconductivity might be induced by enhancing the electron-phonon coupling through the decoration of graphene with an alkali adatom superlattice [Profeta et al. Nat. Phys. 8, 131-134 (2012)]. While experiments have indeed demonstrated an adatom-induced enhancement of the electron-phonon coupling, superconductivity has never been observed. Using angle-resolved photoemission spectroscopy (ARPES) we show that lithium deposited on graphene at low temperature strongly modifies the phonon density of states, leading to an enhancement of the electron-phonon coupling of up to $\lambda\!\simeq\!0.58$. On part of the graphene-derived $\pi^*$-band Fermi surface, we then observe the opening of a $\Delta\!\simeq\!0.9$ meV temperature-dependent pairing gap. This result suggests for the first time, to our knowledge, that Li-decorated monolayer graphene is indeed superconducting with $T_c\!\simeq\!5.9 K$., Comment: Accepted. A high-resolution version with supplementary material can be found at http://qmlab.ubc.ca/ARPES/PUBLICATIONS/Articles/Graphene_Li.pdf

Electron beam induced current (EBIC) measurements were carried out in situ in the scanning electron microscope on free-standing GaAs/Fe core-shell nanowires (NWs), isolated from the GaAs substrate via a layer of aluminum oxide. The excess current as a function of the electron beam energy, position on the NW, and scan direction were collected, together with energy dispersive x-ray spectroscopy. A model that included the effects of beam energy and Fe thickness predicted an average collection efficiency of 60%. Small spatial oscillations in the EBIC current were observed, that correlated with the average Fe grain size (30 nm). These oscillations likely originated from lateral variations in the interfacial oxide thickness, affecting the resistance, barrier potentials, and density of minority carrier recombination traps.

Oxide-isolated GaAs nanowires (NWs) were obtained through a lithography-free method in which axial growth of NWs coated in aluminum oxide (Al2O3) is restarted using an annealing step. NWs are grown using the vapor-liquid-solid method and coated in nanometer thin oxide films using atomic layer deposition. Continued growth at the oxide-coated nanoparticle (NP) occurs after the thermally-induced fracture of the oxide during annealing. This oxide fracture is observed to depend on NP diameter, oxide thickness and annealing temperature. A thermal expansion mismatch model for stresses on the oxide shell is put forward to explain these results.