Search

CSZM compounds were synthesized by dry chemistry route with 5, 10, and 15% dopant of Mg dopants in the Ce 0.8−2x Sm 0.2 Zrx Mgx O2−d, {x = 0.05, 0.1 & 0.15}. The newly investigated materials were physically, chemically, and electrochemically studied and have shown promising results. The CSZM was crystalized in a fluorite structure with a pure cubic phase in a space group Fm3m and cell parameter a = 5.401742 ° A and theoretical density from 7.6 to 8.9 after firing in the air with a final temperature of 1400 °C. Characterization of the structure and indexing of electrolyte materials were made after X-ray diffraction (XRD) testing. A Scanning electron microscope (SEM) morphological analysis was used to examine the microstructure details. Electrochemical impedance spectroscopy (EIS) measurements were performed from 400 °C to 700 °C which show the highest conductivity value of 1.0461 × 10+1 S/cm at 700 °C. In comparison, the minimum value was 2.7329 × 10−2 S/cm at 400 °C, and the total activation energy (Ea ° A ) was found to be 0.6865 eV under 5% H2/Ar. [ABSTRACT FROM AUTHOR]

This study deals with the design and fabrication of parabolic trough solar collectors (PTCs) used to increase the yield of a single slope solar still. The designed parabolic trough solar collector is investigated numerically using Ansys Fluent 18.2. The proposed solar still is coupled with a parabolic trough solar collector with an evacuated tube receiver in its focal axis using different working fluids. The working fluids are water (case 1), oil (case 2), and nano‐oil (CuO/mineral oil 3% vol; case 3). In the case when the working fluid is not water, then a heat exchanger serpentine should be used in the solar still basin. The PTC has a rim angle of 82° and an aperture width of 0.9 m and length of 2.8 m. An assessment of the performance for the studied systems was accomplished under the weather conditions of Ismailia, Egypt, during summer months, June, July, and August 2019. The outcomes of closed‐loop working fluids different flow rates are investigated. The experimental results of the accumulated freshwater productivities record 2.955, 3.475, 4.29, and 5.04 L m−2 d−1 for the traditional solar still and the modified cases 1 to 3 solar stills, respectively. The modified solar still in case 3 has the highest daily accumulated freshwater productivity with a percentage increase of 71.2% than the traditional solar still. The maximum daily efficiency is 46% and 26.9% for the traditional and modified (case 3) solar stills, respectively. The cost of 1 L of fresh water is 0.057 and 0.062 $/L for the traditional and the modified (case 3) solar stills, respectively. [ABSTRACT FROM AUTHOR]