Search

The vast majority of separations in liquid chromatography (LC) still use the typical packed particle bed format, most commonly with fully or superficially porous particles in particle sizes as low as 1.3 urn. As an alternative, monolithic columns have been the topic of many studies, but they are currently used only in some niche applications. Research into perfectly ordered microfabricated columns has shown tremendous possibility for these high performance columns for use in nano-LC, but their development is still ongoing. The possibilities that emerging three-dimensional (3D) printing technology offers make it theoretically possible to develop any imaginable structure with high precision, but the technology is currently limited. This article provides a critical review of all these technologies and demonstrates how further development of chromatographic columns will be of paramount importance in the future., The improvements in instrument and column performance in liquid chromatography (LC) over the past 15-20 years have resulted in an almost 10-fold reduction in analysis time and threefold increase in [...]

The toxic effects of C9orf72-derived arginine-rich dipeptide repeats (R-DPRs) on cellular stress granules in amyotrophic lateral sclerosis (ALS) and frontotemporal dementia remain unclear at the molecular level. Stress granules are formed through the switch of Ras GTPase-activating protein-binding protein 1 (G3BP1) by RNA from a closed inactive state to an open activated state, driving the formation of the organelle by liquid-liquid phase separation (LLPS). We show that R-DPRs bind G3BP1 a thousand times stronger than RNA and initiate LLPS much more effectively. Their pathogenic effect is underscored by the slow transition of R-DPR-G3BP1 droplets to aggregated, ThS-positive states that can recruit ALS-linked proteins hnRNPA1, hnRNPA2, and TDP-43. Deletion constructs and molecular simulations show that R-DPR binding and LLPS are mediated via the negatively charged intrinsically disordered region 1 (IDR1) of the protein, allosterically regulated by its positively charged IDR3. Bioinformatic analyses point to the strong mechanistic parallels of these effects with the interaction of R-DPRs with nucleolar nucleophosmin 1 (NPM1) and underscore that R-DPRs interact with many other similar nucleolar and stress-granule proteins, extending the underlying mechanism of R-DPR toxicity in cells. Our results also highlight characteristic differences between the two R-DPRs, poly-GR and poly-PR, and suggest that the primary pathological target of poly-GR is not NPM1 in nucleoli, but G3BP1 in stress granules in affected cells., Competing Interests: Competing interests statement:The authors declare no competing interest.

Axial dispersion in chromatographic columns is responsible for a reduced separation efficiency. In the present research macrotransport theory is used to predict the phenomenological constants related to axial dispersion. We evaluate the efficacy of lateral flow induced by alternating current (AC) in the presence of retaining walls on the separation resolution. Results show that lateral flows induced by laterally applied potentials as low as 0.3 V reduce C-term dispersion by a factor of 5.0 for unretained conditions (k = 0) and 2.7 for retained (k = 5) conditions, with a diffusion coefficient (D m ) of 10 -11 m 2 /s. The present paper further contributes to the understanding of the use of secondary lateral flows for dispersion reduction and offers practical guidance for designing future vortex chromatographic columns. It appears that a maximal performance gain is attained at low aspect ratios (AR=1), with the gain reduced from a factor of 5 to 1.6 for AR=4 for unretained conditions, and from 2.7 to 1.4 for retained conditions (k = 5)., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier B.V. All rights reserved.)

Soil-transmitted helminthiases (STH) are among the neglected tropical diseases and infect more than 24% of the world population. The World Health Organization recommends regular monitoring of STH's prevalence and intensity following mass drug administrations to evaluate their effectiveness and inform future control strategies. This study evaluated the prevalence, intensity, and risk factors of STH infections among school children aged 6 to 14 years old in northwestern Tanzania. A cross-sectional study was conducted among 728 school children in the Kagera region in 2021. Participants were selected using a two-stage cluster sampling method. A questionnaire was used to collect data on the risk factors. Stool samples were examined using the Kato-Katz technique. The data were analysed using STATA. The overall prevalence of STH was 56.2% (95% CI: 52.5-59.8, 409/728). About 5.7% and 1.1% of the infected children had moderate-intensity infections with Ascaris lumbricoides and Trichuris trichiura, respectively. Risk factors included the mother's occupation as a farmer (aOR: 1.2, p = 0.002) and not washing hands with water and soap (aOR: 1.4, p = 0.035). Washing one's hands after using the toilet (aOR: 0.6; p = 0.024) is a preventive measure against STH infections. STH was prevalent in the study area. The mother's occupation (farmer) and the lack of handwashing with water and soap influenced STH transmission. Conversely, washing hands after visiting the toilet and after playing with soil reduced the risk of STH infection.

Lateral flow membrane microdevices are widely used for chromatographic separation processes and diagnostics. The separation performance of microfluidic lateral membrane devices is determined by mass transfer limitations in the membrane, and in the liquid phase, mass transfer resistance is dependent on the channel dimensions and transport properties of the species separated by the membrane. We present a novel approach based on an active bulk acoustic wave (BAW) mixing method to enhance lateral transport in micromachined silicon devices. BAWs have been previously applied in channels for mixing and trapping cells and particles in single channels, but this is, to the best of our knowledge, the first instance of their application in membrane devices. Our findings demonstrate that optimal resonance is achieved with minimal influence of the pore configuration on the average lateral flow. This has practical implications for the design of microfluidic devices, as the channels connected through porous walls under the acoustic streaming act as 760 µm-wide channels rather than two 375 µm-wide channels in the context of matching the standing pressure wave criteria of the piezoelectric transducer. However, the roughness of the microchannel walls does seem to play a significant role in mixing. A roughened (black silicon) wall results in a threefold increase in average streaming flow in BAW mode, suggesting potential avenues for further optimization.

The development of a standardized, generic method for concentrating suspensions in continuous flow is challenging. In this study, we developed and tested a device capable of concentrating suspensions with an already high cell concentration to meet diverse industrial requirements. To address typical multitasking needs, we concentrated suspensions with high solid content under a variety of conditions. Cells from Saccharomyces cerevisiae, Escherichia coli, and Chinese hamster ovary cells were effectively focused in the center of the main channel of a microfluidic device using acoustophoresis. The main channel bifurcates into three outlets, allowing cells to exit through the central outlet, while the liquid evenly exits through all outlets. Consequently, the treatment separates cells from two-thirds of the surrounding liquid. We investigated the complex interactions between parameters. Increasing the channel depth results in a decrease in process efficiency, attributed to a decline in acoustic energy density. The study also revealed that different cell strains exhibit distinct acoustic contrast factors, originating from differences in dimensions, compressibility, and density values. Finally, a combination of high solid content and flow rate leads to an increase in diffusion through a phenomenon known as shear-induced diffusion. KEY POINTS: • Acoustic focusing in a microchannel was used to concentrate cell suspensions • The parameters influencing focusing at high concentrations were studied • Three different cell strains were successfully concentrated., (© 2024. The Author(s).)

Soil-transmitted helminth (STH) infections are caused by roundworms, hookworms, whipworms, and thread worms. Accurate diagnosis is essential for effective treatment, prevention, and control of these infections. This study evaluates a new diagnostic method called Single-image Parasite Quantification (SIMPAQ), which uses a lab-on-a-disc (LoD) technique to isolate STH eggs into a single imaging zone for digital analysis. The study evaluates the purification performance of the SIMPAQ technique for detecting STH eggs in animal samples. This was a cross-sectional study conducted among 237 pigs and 281 dogs in the Morogoro region in Tanzania. Faecal samples were collected and processed with the LoD technique, as well as flotation and McMaster (McM) methods for comparison purposes. The overall prevalence of STH infections was high as per the LoD technique (74%), followed by McM (65.44%) and flotation (65.04%). Moreover, the overall performance of the LoD technique, using McM as the gold standard, was 93.51% (sensitivity), 60.89% (specificity), 81.91% (PPV), and 83.21% (NPV). The LoD technique exhibited high prevalence, sensitivity, and NPV, which demonstrates its value for STH egg detection and its crucial role in the era of accurate STH diagnosis, promoting proper management of the infection.

A novel scanning particle image velocimetry technique, to the best of our knowledge, is proposed to characterize flows in microfluidic applications. Three-dimensional information is acquired by oscillating the target sample over a fixed focal plane, allowing the reconstruction of particle trajectories with micrometer accuracy over an extended depth. This technology is suited for investigating acoustic flows with unprecedented precision in microfluidic applications. In this contribution, we describe the experimental setup and the data processing pipeline in detail; we study the technique's performance by reconstructing pressure-driven flow; and we report the three-dimensional trajectory of a 2 µm particle in an acoustic flow in a 525µ m ×375µ m microchannel with micrometric accuracy.

Acoustofluidics is an emerging research field wherein either mixing or (bio)-particle separation is conducted. High-power acoustic streaming can produce more intense and rapid flow patterns, leading to faster and more efficient liquid mixing. However, without cooling, the temperature of the piezoelectric element that is used to supply acoustic power to the fluid could rise above 50% of the Curie point of the piezomaterial, thereby accelerating its aging degradation. In addition, the supply of excessive heat to a liquid may lead to irreproducible streaming effects and gas bubble formation. To control these phenomena, in this paper, we present a feedback temperature control system integrated into an acoustofluidic setup using bulk acoustic waves (BAWs) to elevate mass transfer and manipulation of particles. The system performance was tested by measuring mixing efficiency and determining the average velocity magnitude of acoustic streaming. The results show that the integrated temperature control system keeps the temperature at the set point even at high acoustic powers and improves the reproducibility of the acoustofluidic setup performance when the applied voltage is as high as 200 V.

An estimated 1.5 billion people are infected with soil-transmitted helminths (hookworms, Ascaris lumbricoides and Trichuris trichiura ). These infections are targeted for elimination by the World Health Organization (WHO) by 2030, with the main interventions being mass drug administration using albendazole or mebendazole. Tanzania is one of the endemic countries; it has been implementing MDA to school-aged children for more than a decade and the infection prevalence and intensity of infection have declined. Thus, at this point, the monitoring and evaluation of infection prevalence and intensity of infections, and assessing drug efficacy is crucial and requires accurate diagnostic tests. The currently used standard diagnostic test, the Kato-Katz (KK) technique, has several limitations and the WHO is calling for the development and evaluation of new diagnostic tests. The Lab-on-a-disk (LOD) was developed and tested in the endemic areas of north-western Tanzania to evaluate its sensitivity and specificity using KK and the formol-ether concentration technique. The results showed that when using a duplicate KK slide, the LOD had a sensitivity and specificity of 37.2% (95% CI: 30.7-43.9) and 67.3% (95% CI: 63.1-71.3%). Using four KK slides as a standard technique, the overall sensitivity and specificity were 37.7% (95% CI: 33.1-42.6) and 70.7% (95% CI: 65.5-75.6). The LOD attained high specificity but low sensitivity especially in detecting eggs of Trichuris trichiura . The LOD technique has potential as a promising diagnostic test, but its sensitivity still requires improvement.

Active systems - including sperm cells, living organisms like bacteria, fish, birds, or active soft matter systems like synthetic "microswimmers" - are characterized by motility, i.e. , the ability to propel using their own "engine". Motility is the key feature that distinguishes active systems from passive or externally driven systems. In a large ensemble, motility of individual species can vary in a wide range. Selecting active species according to their motility represents an exciting and challenging problem. We propose a new method for selecting active species based on their motility using an acoustofluidic setup where highly motile species escape from the acoustic trap. This is demonstrated in simulations and in experiments with self-propelled Janus particles and human sperm. The immediate application of this method is selecting highly motile sperm for medically assisted reproduction (MAR). Due to the tunable acoustic trap, the proposed method is more flexible than the existing passive microfluidic methods. The proposed selection method based on motility can also be applied to other active systems that require selecting highly motile species or removing immotile species.

The recently proposed single-image parasite quantification (SIMPAQ) platform based on a Lab-on-a-Disc (LOD) device was previously successfully tested in field conditions, demonstrating its efficiency in soil-transmitted helminth (STH) egg detection and analysis on the level delivered by the current state-of-the-art methods. Furthermore, the SIMPAQ provides relatively quick diagnostics and requires small amounts of sample and materials. On the other hand, in a recent related study, it was revealed that the performance of the SIMPAQ method can be limited due to the action of the tangential Euler and Coriolis forces, and the interaction of the moving eggs with the walls of the LOD chamber. Here, we propose a new improved design that allows us to overcome these limitations and enhance the yield of the SIMPAQ LOD device, as demonstrated in experiments with a synthetic particle model system and real parasite eggs. Despite the simplicity, the proposed design modification is demonstrated to allow a substantial improvement in the yield of the SIMPAQ device, i.e., above 90% of parasite eggs and 98% of synthetic model particles were transported to the field of view. The new design proposed here will be further examined in the new generation of SIMPAQ devices within ongoing research on STH egg detection in field conditions.

The performance of liquid chromatography operation in open-tubular channels, the ideal chromatographic column format, is limited by slow mass transport between the mobile and stationary phase. We recently introduced a lateral mixing methodology ("vortex chromatography") to reduce Taylor-Aris dispersion by employing (small) AC-EOF (alternating current electroosmotic flow) fields oriented perpendicular to the conventionally applied, axially oriented pressure gradient, resulting in the reduction of the C-term by a factor of 3, studied in 40 × 20 μm 2 (aspect ratio (AR) = 2) channels under unretained conditions. In the present contribution, a further increased performance gain for channel dimensions relevant for chromatographic applications is demonstrated. The impact of the applied voltage and salt concentration is studied for 3 × 20 and 5 × 20 μm 2 channels in ARs of up to 6.7, revealing a C-term reduction potential of a factor of up to 5 for large molecules (dextran) under unretained conditions. The decrease in κ aris in a 5 μm channel (reduction of 80%) was larger than the decrease in a 3 μm channel (reduction of 44%).

Layer-by-Layer coating technology is of great importance for many applications of microparticles whereby exposure of the particles to various reagents is needed. Mutual contamination of the reagents during this process is a key challenge, and this undesired effect should be avoided. Here we introduce a device that provides subsequent exposure of particles to various liquids and minimizes mixing of the liquids at the same time. The key element of the device is a rail (groove) at the bottom of a microfluidic channel. The rail forms an angle (between 0 and 90 degrees) and thus enables passive transport of particles through the intact co-flows of the different fluids. To avoid the undesirable effect of reagent stream mixing, internal walls are introduced to separate the different flows. Various designs of the proposed device are considered, and their performance is experimentally analyzed.

The online coupling of microchip electrophoresis (ME) as a fast, highly efficient, and low-cost miniaturized separation technique to mass spectrometry (MS) as an information-rich and sensitive characterization technique results in ME-MS an attractive tool for various applications. In this paper, we review the basic concepts and latest advances in technology for ME coupled to MS during the period of 2016-2021, covering microchip materials, structures, fabrication techniques, and interfacing to electrospray ionization (ESI)-MS and matrix-assisted laser desorption/ionization-MS. Two critical issues in coupling ME and ESI-MS include the electrical connection used to define the electrophoretic field strength along the separation channel and the generation of the electrospray for MS detection, as well as, a miniaturized ESI-tip. The recent commercialization of ME-MS in zone electrophoresis and isoelectric focusing modes has led to the widespread application of these techniques in academia and industry. Here we summarize recent applications of ME-MS for the separation and detection of antibodies, proteins, peptides, carbohydrates, metabolites, and so on. Throughout the paper these applications are discussed in the context of benefits and limitations of ME-MS in comparison to alternative techniques., (© 2022 Wiley-VCH GmbH.)

This paper presents a rail guided method to apply a Layer-by-Layer (LbL) coating on particles in a microfluidic device. The passive microfluidic approach allows handling suspensions of particles to be coated in the system. The trajectory of the particles is controlled using engraved rails, inducing lateral movement of particles while keeping the axially oriented liquid flow (and the interface of different liquids) undisturbed. The depth and angle of the rails together with the liquid velocity were studied to determine a workable geometry of the device. A discontinuous LbL coating procedure was converted into one continuous process, demonstrating that the chip can perform seven consecutive steps normally conducted in batch operation, further easily extendable to larger cycle numbers. Coating of the particles with two bilayers was confirmed by fluorescence microscopy., (© 2022. The Author(s).)

Protein self-assembly into fibrils and oligomers plays a key role in the etiology of degenerative diseases. Several pathways for this self-assembly process have been described and shown to result in different types and ratios of final assemblies, therewith defining the effective physiological response. Known factors that influence assembly pathways are chemical conditions and the presence or lack of agitation. However, in natural and industrial systems, proteins are exposed to a sequence of different and often complex mass transfers. In this paper, we compare the effect of two fundamentally different mass transfer processes on the fibrilization process. Aggregation-prone solutions of hen egg white lysozyme were subjected to predominantly non-advective mass transfer by employing centrifugation and to advective mass transport represented by orbital shaking. In both cases, fibrilization was triggered, while in quiescent only oligomers were formed. The fibrils obtained by shaking compared to fibrils obtained through centrifugation were shorter, thicker, and more rigid. They had rod-like protofibrils as building blocks and a significantly higher β-sheet content was observed. In contrast, fibrils from centrifugation were more flexible and braided. They consisted of intertwined filaments and had low β-sheet content at the expense of random coil. To the best of our knowledge, this is the first evidence of a fibrilization pathway selectivity, with the fibrilization route determined by the mass transfer and mixing configuration (shaking versus centrifugation). This selectivity can be potentially employed for directed protein fibrilization.

Acoustically induced secondary flows are applied to enhance lateral mass transfer beyond the relatively slow diffusion. This has the goal to reduce convective axial dispersion and the resulting band broadening which, in turn, limits the performance of column chromatography. Traditional approaches based on Taylor-Aris model are limited to one-dimensional rectilinear (unidirectional) tube- or channel-flows. We therefore apply the generalized dispersion theory (GDT) allowing for prediction of the dependence of potentially improved performance on the characteristics of the induced secondary flow, channel geometry and solute properties as well as providing qualitative physical insight into the role of lateral flows. Results corroborate agreement with our experimental observations (residual standard deviation, S res  = 3.88) and demonstrate the advantage of applying GDT relative to 3D time-dependent simulations., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

The continuous quest for chromatographic supports offering kinetic performance properties superior to that of the packed bed of spheres has pushed the field to consider alternative formats such as for example monolithic and pillar array columns. This quest seems bound to culminate in the use of 3D printing technology, as this intrinsically offers the possibility to produce supports with a perfect uniformity and with a size and shape that is fully optimized for the chromatographic separation process. However, to be competitive with the current state-of-the-art, structures with sub-micron feature sizes are required. The present contribution therefore investigates the use of the 3D printing technology with the highest possible resolution available today, i.e., two-photon polymerization (2PP). It is shown that 2PP printing is capable of achieving the required ≤ 1 µm printing resolution. Depending on the laser scan speed, the lower limit through-pore size for a tetrahedral skeleton monolith with a theoretical 80% external porosity was found to be at 800 nm, when printing at a scan speed of 50 mm/s with a laser power of 10%. For a scan speed of 10 mm/s, the minimal through-pore size dropped to 500 nm. However, this very high resolution comes at the cost of excessively long printing times. The total printing time for a column volume equivalent to that of a typical nano-LC column (75 µm i.d. cylindrical tube with length L = 15 cm) has been determined to correspond to 330 and 470 h for the 50 mm/s and the 10 mm/s scan speed respectively. Other issues remaining to be solved are the need to clad the printed skeleton with a suitable mesoporous layer for chromatographic retention and the need to add a top-wall to the printed channels after the removal of the non-polymerized resin. It is therefore concluded that 2PP printing is not ready yet to replace the existing column fabrication methods., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier B.V. All rights reserved.)

The effect of the lateral walls of a Lab-On-a-Disc device on the dynamics of a model system of particles with a density lower than that of the solvent (modelling parasites eggs) is analyzed theoretically and experimentally. In the absence of lateral walls, a particle always moves in the direction of the centrifugal force, while its trajectory is deflected in the tangential direction by the inertial Coriolis and Euler forces. Lateral walls, depending on the angle forming with the radial direction, can guide the particle either in the same or in the opposite direction to the centrifugal force, thus resulting in unusual particle trajectories including zig-zag or backwards particle motion. The effect is pronounced in the case of short operation times when the acceleration of the angular rotation, and thus the Euler force, is considerable. The predicted unusual motion is demonstrated by numerically solving the equation of motion in the presence of lateral walls and verified in the experiment with particles of density lower than that of the solvent. Our analysis is useful for design and operational considerations of Lab-On-a-Disc devices aiming for or involving (bio)particle handling.

Classically, the configuration of electrodes (conductors) is used as a means to determine AC-electroosmotic flow patterns. In this paper, we use the configuration of insulator materials to achieve AC-electroosmotic flow patterning in a novel approach. We apply AC electric fields between parallel electrodes situated on the top and bottom of a microfluidic channel and separated by an insulating material. Channels of various cross-sectional shapes (e.g. rectangular and parallelogram) were fabricated by shaping the insulating material between the electrodes. We found that vortex flow patterns are induced depending on the cross-sectional shape of the channel. A bell-shaped design with non-orthogonal corners gave rise to 2 vortices, whereas in a channel with a parallelogram shaped cross-section, only a single vortex was observed. The vortices were experimentally observed by analysing the 3D trajectories of fluorescent microparticles. From a theoretical analysis, we conclude that flow shaping is primarily caused by shaping the electrical field lines in the channel.

In this study, the adsorption behavior of naproxen and fenoprofen as two model compounds on a non-porous pillar array column (NPAC) was investigated under reverse phase liquid chromatography conditions. Band profiles of both analytes were recorded in overloaded concentrations using 30% methanol/water (v/v) as the mobile phase. Breakthrough experiments under the same chromatographic condition were carried out to measure the adsorption isotherms. Single-component adsorption isotherm data were acquired by frontal analysis for each analyte. The isotherms were found to be concave upward and downward for naproxen and fenoprofen, respectively. To find the best agreement between the experimental data points and the adsorption isotherm models, the obtained isotherms were modeled using several isotherm models. The Langmuir-Freundlich and anti-Langmuir models provided the best fitting for fenoprofen and naproxen, respectively. The solute and stationary phase properties determine the appropriate model. Adsorbate-adsorbate interaction is important in the case of naproxen, while the adsorbate- adsorbent (stationary phase) plays the main role in retention of fenoprofen on the NPAC. The validity of the selected isotherm models were checked by comparing calculated and experimental band profiles and plate heights. An excellent agreement was observed for the whole concentration range of both analytes, which confirmed the accuracy of the selected models., Competing Interests: Declaration of Competing Interest Wim De Malsche is (co-)founder and shareholder of PharmaFluidics, a company that commercializes pillar array columns., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Chromatographic columns are suffering from Taylor-Aris dispersion, especially for slowly diffusing molecules such as proteins. Since downscaling the channel size to reduce Taylor-Aris dispersion meets fundamental pressure limitations, new strategies are needed to further improve chromatography beyond its current limits. In this work we demonstrate a method to reduce Taylor-Aris dispersion by lateral mixing in a newly designed silicon AC-electroosmotic flow mixer. We obtained a reduction in κ aris by a factor of three in a 40 μm × 20 μm microchannel, corresponding to a plate height gain of 2 to 3 under unretained conditions at low to high Pe values. We also demonstrate an improvement of a reverse-phase chromatographic separation of coumarins.

In the present study, cylindrical and laterally elongated pillar array columns were investigated for use in capillary electrochromatography. Minimal theoretical plate heights of H = 1.90 and 1.46 μm (in absence of sidewall effect) were obtained for coumarin C440 under unretained conditions for cylindrical and rectangular (laterally elongated, aspect ratio 4) pillar array columns, respectively. By comparing dispersion at the entire channel width to that at the central zone only, it appears that sidewall related dispersion significantly contributes to overall dispersion. A 40% reduction of the plate height was observed by taking into account only the central channel zone. A kinetic plot analysis was performed to evaluate the potential of the studied geometries by considering a maximum operating voltage of 20 kV as limiting parameter. It was demonstrated that rectangular radially elongated pillars produce a higher efficiency than cylindrical pillars and other microfabricated column structures for microchip capillary electrochromatography previously studied., (© 2020 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Synthetic nano- and micromotors interact with each other and their surroundings in a complex manner. Here, we report on the anisotropy of active-passive particle interaction in a soft matter system containing an immobile yet photochemical Ag/AgCl-based Janus particle embedded in a dense matrix of passive beads in pure water. The asymmetry in the chemical gradient around the Janus particle, triggered upon visible light illumination, distorts the isotropy of the surrounding electric potential and results in the repulsion of adjacent passive beads to a certain distance away from the Janus particle. This exclusion effect is found to be anisotropic with larger distances to passive beads in front of the Ag/AgCl cap of the Janus particle. We provide insight into this phenomenon by performing the angular analysis of the radii of exclusion and tracking their time evolution at the level of a single bead. Our study provides a novel fundamental insight into the collective behavior of a complex mixture of active and passive particles and is relevant for various application scenarios, e.g., particle transport at micro- and nanoscale and local chemical sensing.

The preparation of a highly efficient chiral liquid chromatography (LC) column is explored by dynamically coating a reversed-phase porous silicon pillar array column with hydroxypropyl-β-cyclodextrin (Hp-β-CD) as the chiral selector. Analyte mixtures composed of non-steroidal anti-inflammatory drugs were tested to reveal the enantioseparation potential of the column. The mechanism of chiral discrimination was investigated. The adsorbed Hp-β-CDs on the column surface experience different interaction with enantiomers. The chiral stationary phase showed satisfying stability and could be easily restored by recovering the selector with sufficient flushing and repeating the loading procedure. The peak capacity of the column was evaluated, and it was found high enough to separate three enantiomer couples using a one-dimensional LC technique., Competing Interests: Declaration of Competing Interest Wim De Malsche is co-founder of PharmaFluidics and has shares of the company., (Copyright © 2019 Elsevier B.V. All rights reserved.)

We present a lab-on-a-disk technology for fast identification and quantification of parasite eggs in stool. We introduce a separation and packing method of eggs contained in 1 g of stool, allowing for removal of commonly present solid particles, fat droplets and air bubbles. The separation is based on a combined gravitational and centrifugal flotation, with the eggs guided to a packed monolayer, enabling quantitation and identification of subtypes of the eggs present in a single field of view (FOV). The prototype was tested with stool samples from pigs and humans infected with intestinal parasites (soil-transmitted helminths eggs). The quality of the images created by this platform was appropriate for identification and quantification of egg types present in the sample.

In the present study, the peak capacity potential of ultralong porous cylindrical pillar array columns is investigated. Coupling 4 columns of 2 m long allows for working near the minimal separation impedance of small molecules under retained conditions at a maximal pressure load of 250 bar. Minimal plate heights of H = 5.0 μm, H = 6.3 μm, and H = 7.7 μm were obtained for uracil (unretained), butyrophenone ( k = 0.85), and valerophenone ( k = 1.94), respectively, corresponding to a number of theoretical plates of N = 1.6 × 10 6 , N = 1.2 × 10 6 , and N = 1.0 × 10 6 . The optimal linear velocities were 0.60 mm/s for a retained compound and 0.74 mm/s for an unretained compound. Based on a mixture of 9 compounds, the peak capacity n c was determined as a function of gradient time ( t G ). Peak capacities ( t G -based) of 1103 and 1815 were obtained when applying 650 min and 2050 min gradients ( t G /t 0 = 4.5 and 14, respectively, with t G as the gradient time and t 0 as the void time). These values are much higher than earlier reported peak capacity values for small molecules.

We report on the ability to change the layer properties of porous layered radially elongated pillar (PLREP) array columns and its relevance to the separation efficiency. The adjustment of the preparation condition resulted in the formation of a 1.2-fold thicker layer than the layer produced in the preceding study. The mesoporosity of the layer was controlled by changing the hydrothermal treatment temperature from 105 °C to 80 °C. Chromatographic characterization was performed on a commercial nano-LC system using the octadecylsilylated PLREP columns having the aforementioned characteristics, i.e. (1) different layer thickness (d f  = 180-220 nm) and (2) different mesoporosity (d p  = 7.6-11.2 nm, Pore volume (V p ) = 0.733‒0.838 cc/g and Surface area (SA) = 364‒611 m 2 /g). For isocratic separations of an alkylphenone mixture, the change in both the layer thickness and the mesoporosity caused no significant difference in the column efficiency, while the thicker layer and the reduction of mesopore size resulted in a 1.3-fold increase and a 1.4-fold increase in the retention capacity, respectively. Based on the result of the examination using scanning electron microscopy and argon physisorption technique, the formar enhancement was in agreement with the increase in the layer thickness, and the latter one was attributed to the larger surface area. When applying a column with 16.5 cm long to gradient separations, the combination of the thicker layer and the smaller mesopores provided the peak capacity of 365 for the alkylphenone mixture at a 180 min gradient, while the combination of the thinner layer and the larger mesopores provided the peak capacity of 315. For peptide separations, it appeared that the thicker layer was still favorable, however, the lager mesopores were more advantageous for MWs of larger than 1000, providing a conditional peak capacity of 245 for a commercially available peptide mixture because of less content of small pores which hinder the diffusion of large molecules in pores in the layer., (Copyright © 2019 Elsevier B.V. All rights reserved.)

The performance of a porous-layered radially elongated pillar (PLREP) array column in a commercial nano-LC system was examined by performing separation of alkylphenones and peptides. The mesoporous silica layer was prepared by sol-gel processing of a mixture of tetramethoxysilane and methyltrimethoxysilane on REPs filling a 16.5 cm long, 1 mm wide channel (three lanes of 5.5 cm long channels connected by turns). The minimum plate height of 1.4 μm for octanophenone (k = 2.21) observed in isocratic mode is 5 times smaller than the smallest off-column plate height previously reported for porous pillar array columns for a retained component. This advantage is related to the earlier introduced shape of the radially elongated pillar bed that outperforms the cylindrically shaped pillar bed in terms of the plate height. In gradient mode, maximum conditional peak capacities of 220 (for a mixture of thiourea and 7 alkylphenones, tG = 180 min) and 160 (for a cytochrome c digest, tG = 150 min) were obtained. These results indicate excellent potential for implementation of this sol-gel layer in pillar array column formats.

We report on a modification in the hydrothermal treatment process of monolithic silica layers used in porous-layered open tubular (PLOT) columns. Lowering the temperature from the customary 95 °C to 80 °C, the size of the mesopores reduced by approximately about 35% from 12-13.5 nm to 7.5-9 nm, while the specific pore volume essentially remains unaltered. This led to an increase of the specific surface area (SA) of about 40%, quasi-independent of the porous layer thickness. The increased surface area provided a corresponding increase in retention, somewhat more (48%) than expected based on the increase in SA for the thin layer columns, and somewhat less than expected (34%) for the thick layer columns. The recipes were applied in 5 μm i.d.-capillaries with a length of 60 cm. Efficiencies under retained conditions amounted up to N = 137,000 for the PLOT column with a layer thickness (d f ) of 300 nm and to N = 109,000 for the PLOT column with d f  = 550 nm. Working under conditions of similar retention, the narrow pore/high SA columns produced with the new 80 °C recipe generated the same number of theoretical plates as the wide pore size/low SA columns produced with the 95 °C recipe. This shows the 80 °C-hydrothermal treatment process allows for an increase in the phase ratio of the PLOT columns without affecting their intrinsic mass transfer properties and separation kinetics. This is further corroborated by the fact that the plate height curves generated with the new and former recipe can both be well-fitted with the Golay-Aris equation without having to change the intra-layer diffusion coefficient., (Copyright © 2018 Elsevier B.V. All rights reserved.)