Search

This study shows, for the first time, how the natural biodegradation of the Phaeophyceae Rugulopteryx okamurae (R.o.) affects its methane yield, by biochemical methane potential assays, and the methane production kinetics. Additionally, a mechanical (zeolite-assisted milling) and a thermal (120 °C, 45 min) pretreatments were assessed. The highest methane yield was obtained from the mechanically pretreated fresh ashore biomass (219 (15) NL CH4 kg VS -1 ), which presents the use of zeolite during milling as an economical alternative for heavy metal toxicity reduction. Moreover, no significant differences were observed between the other tests (with the exception of the lowest value obtained for the mechanically pretreated fresh R.o.). Low methane yields were linked to the heavy metal content. However, an increase of 28.5 % and 20.0 % in the k value was found for the untreated fresh R.o. biomass and fresh ashore biomass, respectively, when subjected to thermal pretreatment. Finally, an enhancement of 80.5 % in the maximum methane production rate was obtained for the fresh ashore biomass milled with zeolite compared to the untreated fresh ashore biomass., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier Ltd.. All rights reserved.)

The invasive alien seaweed Rugulopteryx okamurae (R.o.) has spread quickly through the Mediterranean Sea causing an unprecedented ecological impact. A solution integrated into a circular economy model is needed in order to curb the negative effects of its presence. Anaerobic digestion (AD) is proposed as a feasible process able to transform biomass into renewable energy. Nevertheless, in order to improve the methane yield and surpass the drawbacks associated with AD processes, this research proposes a thermal pretreatment and a new developed method where the macroalgae is mechanically pretreated with zeolite. Chemical and microstructure characterization of the algal biomass after pretreatments involved scanning electron microscopy (SEM), X-ray powder diffraction (XRD) and Fourier-transform infrared spectroscopy (FTIR). The highest methane yields of 240 (28) and 250 (20) NL CH4 kg -1 VS added were obtained with the new mechanical pretreatment and the thermal pretreatment at 120 °C for 45 min without zeolite, achieving a 35 % improvement against the non-pretreated algae. A direct relationship between the crystallinity index of the samples and methane production was observed. The experimental data of methane production versus time were found to be in accordance with both first-order kinetic and Transference Function mathematical models., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

This study evaluates the comprehensive valorization of the byproducts derived from the two-phase olive oil elaboration process [i.e., olive washing water (OWW), olive oil washing water (OOWW), and olive mill solid waste (OMSW)] in a closed-loop process. Initially, the microalga Raphidocelis subcapitata was grown using a mixture of OWW and OOWW as the culture medium, allowing phosphate, nitrate, sugars, and soluble chemical oxygen demand removal. In a second step, the microalgal biomass grown in the mixture of washing waters was used as a co-substrate together with OMSW for an anaerobic co-digestion process. The anaerobic co-digestion of the combination of 75% OMSW-25% R. subcapitata enhanced the methane yield by 7.0 and 64.5% compared to the anaerobic digestion of the OMSW and R. subcapitata individually. This schedule of operation allowed for integration of all of the byproducts generated from the two-phase olive oil elaboration process in a full valorization system and the establishment of a circular economy concept for the olive oil industry.

The table olive industry produces a high quantity of wastewater annually. These wastewaters are very problematic because of their characteristics of high organic matter, high phenolic content, high salinity and conductivity. The quantities in which they are produced are also a serious problem. The worldwide production of table olives reached 2,550,000 tons in the last five campaigns, with the European Union contributing to 32% of total production. The problem of these wastewaters is focused on the Mediterranean area where the highest quantity of table olives is produced and to a lesser extent on the United States and South America. Countries like Spain produce around 540,000 tons of these wastewaters. At present, there is no standard treatment for these wastewaters with acceptable results and which is applied in the industry. Currently, the most common treatment is the storage of these wastewaters in large evaporation ponds where, during the dry season, the wastewater disappears due to evaporation. This is not a solution as the evaporation ponds depend completely on the climatology and have a high number of associated problems, such as bad odors, insect proliferation and the contamination of underground aquifers. Different studies have been carried out on table olive wastewater treatment, but the reality is that at the industrial level, none has been successfully applied. New and promising treatments are needed. The current review analyzes the situation of table olive wastewater treatment and the promising technologies for the future.